Solman system not coming up after Kerbel upgrade

Hi All,
We are not able to bring the system up after kernel upgrade on our Solution Manager Development system.We were trying to upgrade kernel from 32 to 94.
Solman is on Netweaver 7.0 EHP1
We are having our Opearting Sytem as AIX 5.3
Our database is DB2 version 9.1.5
DB2 is installed on Mainframe.
Please find logs of R3trans below
As per the error we found that SAPCL is not installed (Note 1236755), but further analysis we found that SAPCL & Kernel Upgrade are independent of each other.
Can Restarting the DB2 database help on this issue?
Regards
Shailesh
Error from R3 trans Log
=================================================================================================
4 ETW000 [dbdb2cli    ,00000] *** ERROR => DB2 Call 'CLI_EXECUTE' Error: sqlcode = -204 : [IBM][CLI Driver][DB2] SQL0204N "SAPASJ4.DB2QWPT2P" is an undefined name. SQLSTATE=42704
4 ETW000                                                                           40638 0.470875
4 ETW000 [dev trc     ,00000] Monitor for DB2 system not started. Retrieving EBCDIC CCSID from SYSIBM.SYSSTRINGS.
4 ETW000                                                                              42 0.470917
4 ETW000 [dbsldb2.    ,00000] *** ERROR => Retrieving EBCDIC CCSID from SYSIBM.SYSSTRINGS failed. Assuming EBCDIC CCSID 500.
4 ETW000                                                                           38219 0.509136
4 ETW000 [dev trc     ,00000] EBCDIC CCSID calculated from SYSIBM.SYSSTRINGS is 500 .
===================================================================================================

Hi lababe,
Welcome to the BlackBerry Support Community.
If your BlackBerry® Curve™ 9360 smartphone is unable to be detected by a computer due to the reboot loop, please connect your BlackBerry smartphone without the battery inserted and try to reload the BlackBerry® Device Software. Once the software load has already started, reinsert the battery.
For further instructions, please see: How to force the detection of the BlackBerry smartphone using Application Loader. www.blackberry.com/btsc/KB10144
Please note: This process will remove all data from your BlackBerry smartphone.
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

SAP JAVA system not coming up after restart

Hello SAP experts,
I have a following enviorment
SAP WAS JAVA only
OS:- solaris
DB;- 9207
Kernel:= 640
I had a daily schedule restart of the system.
But after shutting down the system is not coming up and also i chekeced the logs it was related to R3trans.
the R3trans -d log is as seen below:-
Line:-----
"trans.log" [Read only] 44 lines, 4056 characters
4 ETW000 R3trans version 6.09 (release 640 - 13.01.05 - 10:38:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 24.06.2009 - 13:04:46
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Jun 24 13:04:46 2009 733 0.000733
4 ETW000 [dev trc ,00000] db_con_init called 66 0.000799
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 316 0.001115
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/DC2/SYS/exe/run/dboraslib.so' ...
4 ETW000 206 0.001321
4 ETW000 [dev trc ,00000] Wed Jun 24 13:04:47 2009 92178 0.093499
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/DC2/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 283 0.093782
4 ETW000 [dev trc ,00000] Library '/usr/sap/DC2/SYS/exe/run/dboraslib.so' loaded
4 ETW000 88 0.093870
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/DC2/SYS/exe/run/dboraslib.so
4 ETW000 110 0.093980
4 ETW000 [dev trc ,00000] Version of '/usr/sap/DC2/SYS/exe/run/dboraslib.so' is "640.00", patchlevel (0.55)
4 ETW000 520 0.094500
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/DC2/SYS/exe/run/dboraslib.so
4 ETW000 94 0.094594
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/DC2/SYS/exe/run/dboraslib.so
4 ETW000 266 0.094860
4 ETW000 [dev trc ,00000] New connection 0 created 98 0.094958
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000 112 0.095070
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 147 0.095217
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 88 0.095305
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000 92 0.095397
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/DC2/920_64 from environment
4 ETW000 1837 0.097234
4 ETW000 [dev trc ,00000] -->oci_init1 123 0.097357
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 73 0.097430
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
4 ETW000 9213 0.106643
4 ETW000 [dblink ,00419] ***LOG BY2=>sql error -1 performing CON [dblink#2 @ 419]
:$
4 ETW000 266 0.094860
4 ETW000 [dev trc ,00000] New connection 0 created 98 0.094958
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000 112 0.095070
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 147 0.095217
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 88 0.095305
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000 92 0.095397
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/DC2/920_64 from environment
4 ETW000 1837 0.097234
4 ETW000 [dev trc ,00000] -->oci_init1 123 0.097357
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 73 0.097430
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
4 ETW000 9213 0.106643
4 ETW000 [dblink ,00419] ***LOG BY2=>sql error -1 performing CON [dblink#2 @ 419]
4 ETW000 356 0.106999
4 ETW000 [dblink ,00419] ***LOG BY0=>'OCI_ERROR' [dblink#2 @ 419] 61 0.107060
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DC2'"
~
Line:-----
So i changed the NLS parameter from
Old value:-ORA_NLS33=/oracle/DC2/920_64/ocommon/nls/admin/data
New value:- ORA_NLS33/oracle/client/92x_64/ocommon/nls/admin/data
Now R3trans -x worked fine but R3trans -d is not working well its giving the following utput
6% R3trans -d
This is R3trans version 6.09 (release 640 - 13.01.05 - 10:38:00).
unicode enabled version
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function: db_ntab
2EETW000 fcode: NT_RDTDESCR
2EETW000 tabname: TADIR
2EETW000 len (char): 5
2EETW000 key: TADIR
2EETW000 retcode: 2
R3trans finished (0012).
nus650pa:dc2adm 7% R3trans -x
This is R3trans version 6.09 (release 640 - 13.01.05 - 10:38:00).
unicode enabled version
R3trans finished (0000).
So please help me out for the same.
Apreciating your valuable help.
Thanks and Regards,
Ramkrishna

Hello Markus and Mr. Joshi,
The problem has been solved now.
And the analysis of the logs was not much helpful as the dev_jcontrol, dev_dispatcher and other std_* logs were only saying about the shutdown operation.
so i was trying to solve the issue old ways so tried the R3trans as such the client has not upgraded the kernel for pretty long time , but after much research i found out that there was a oracle client updated on the same server.
so i changed the NLS33 parameter and also added the old client path in LD_LIBRARY_PATH.
It worked fine and the portal is up and running.
Thanks for the advice and help guys.
Regards,
Ramkrishna

Essbase not coming up after the upgradation of server

Hi , Can any one help me out inthis. There was a solaris server upgrade on which our essbase isresiding(version 6.5.4).After the upgradation,the application wentdown and when we tried to bring essbase up we got an error messageas below:-------------------------------------------------------------------------------------------------------------Fatal Error: Essbase is already loaded ld.so.1: ESSBASE: fatal: libessnet.so.1: open failed: No such fileor directory---------------------------------------------------------------------------------------------------------------Was this because the upgradation has corrupted some of thefiles? can anyone please tell me what does this file do with theessbase coming up. Or if anyone has faced similar kind of problem. 

Quote from: AaronYuri on 23-September-07, 06:22:38
He wants system, power supply specs and amperages on the +12v rails.
You didn't read it correcty:
First sentence of the Moan Guide...
DFI RS482 Infinity Rev 10. BIOS rev 6.00
Athlon X2 3800+ @2.4ghz
2x1GB PQI 3-4-4-8 @200Mhz
WD 250GB
MSI RX2600XT Diamond DDR4
Catalyst 7.9
Windows XP Media Center 2002 SP2
Sparkle ATX-450PN-B204 450W
+12 min 11.78; max 11.97; current: 11.90
I don't know why this spec has anything to do with my problem.
As I stated before, I have NO PROBLEM with nvidia card installed on my system.
I can hear the computer running through POST but I cannot see anything on my display until the blue Windows Welcome screen and my desktop.

9360 is not coming up after apps upgrade

Hello,
I just upgraded some apps on my BB 9360 of just a few days after which I tried restarting the BB over an hour ago. But it just keeps rebooting over and over again without the phone coming up. I charged IT for over an hour thinking probably the battery was low, but to no avail.
Please advice on what to do as the BB just keeps rebooting.
Thank you

Hi lababe,
Welcome to the BlackBerry Support Community.
If your BlackBerry® Curve™ 9360 smartphone is unable to be detected by a computer due to the reboot loop, please connect your BlackBerry smartphone without the battery inserted and try to reload the BlackBerry® Device Software. Once the software load has already started, reinsert the battery.
For further instructions, please see: How to force the detection of the BlackBerry smartphone using Application Loader. www.blackberry.com/btsc/KB10144
Please note: This process will remove all data from your BlackBerry smartphone.
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

ASM not coming up after OS upgrade

Hi All,
I'm very new to Oracle, i had a perfectly working test environment on a virtual machine running RHEL5.8 and Oracle 11.2.0.4, on single node env.
I then did an OS upgrade (with linux upgradeany option) from RHEL5.8 to RHEL6.4. Upgrade process went smoothly and from the OS side, everything was working as expected.
However, ASM did not startup (check with ps -ef |grep smon & pmon) and both returned nothing.
Please suggest any fix that might help resolve this. I'm willing to try any command suggestions as this is a test box.
Thanks

Hi Freddie,
I have tried that, and it gave me this error:
[oracle@[hostname] bin]$ ./crsctl start has
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
I had a separate session to the same box and i was tail-ing system log - messages and the message below came up:
Feb 24 14:39:43 [hostname] exec /oracle/grid/11.2.0.4/db1_1/perl/bin/perl -I/oracle/grid/11.2.0.4/db1_1/perl/lib /oracle/grid/11.2.0.4/db1_1/bin/crswrapexece.pl /oracle/grid/11.2.0.4/db1_1/crs/install/s_crsconfig_[hostname]_env.txt /oracle/grid/11.2.0.4/db1_1/bin/ohasd.bin "reboot"
Nothing recent shows up on the ohasd.log file
the ohasdOUT.log have this in it:
2015-02-24 14:39:19
Changing directory to /oracle/grid/11.2.0.4/db1_1/log/[dbname]/ohasd
OHASD starting
OHASD stderr redirected to ohasdOUT.log
2015-02-24 14:39:43
Changing directory to /oracle/grid/11.2.0.4/db1_1/log/[dbname]/ohasd
OHASD starting
Thanks

IPAD not coming up after restoring to factory setting

after a succesful trial on a colleagues itune pending upgrade of mine to the latest version, we successfully set up mi nenly acquired IPAD but later restore to factory setting when we discovered it was 'not charging'. Unfortunately, my IPAD has not been coming up after my upgrade (it is not even seeing itune anymore)- not even on anybody else's system. Can you please offer any help.
Thank you in anticipation of your prompt suggestion or resolution

i had a scare tonight as IMAME4all is out i thought id try to have a look and my ipad wouldnt restore in itunes i tried three times and on the last as it was trying to wait for ipad i noticed that home sharing was on in itunes i turned of off in the menu and bang it bleww up .... / no not really but it started restoring and all good for normal pad.

SAP is not coming up after installing Java Add-in

Hi,
I have installed a Java Add-in for an existing ABAP system. At the stage of "start J2EE engine" it is throwing an error message saying that Java is not coming up after 1142 seconds. I checked config tool and it is working fine. I restarted SAP. After restarting SAP, SAP is coming up and after 1 or 2 mins the disp+work is getting stopped and all the work processes are getting died. I couldn't able to understand & resolve the issue. The system is NetWeave 04. Here is the dev_w0 trace information.
*dev_w0 trace file information*
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Feb 05 12:06:29 2009
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4489]
M sysno 00
M sid IDS
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 247
M intno 20020600
M make: multithreaded, Unicode
M pid 4780
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4780) [dpxxdisp.c 1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 20328 (1452)
M DpShMCreate: sizeof(tm_adm) 2969176 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07530040, size: 3391480)
M DpShMCreate: allocated sys_adm at 07530040
M DpShMCreate: allocated wp_adm at 07531B88
M DpShMCreate: allocated tm_adm_list at 07536AF0
M DpShMCreate: allocated tm_adm at 07536B18
M DpShMCreate: allocated wp_ca_adm at 0780B970
M DpShMCreate: allocated appc_ca_adm at 07811730
M DpShMCreate: allocated comm_adm_list at 07813670
M DpShMCreate: allocated comm_adm at 07813688
M DpShMCreate: allocated vmc_adm_list at 0785A358
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0785A380
M DpShMCreate: allocated wall_adm at 0785A388
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X
X Thu Feb 05 12:06:30 2009
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Feb 05 12:06:31 2009
M calling db_connect ...
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4489]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9708]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ord-sapproj_IDS_00 on host ord-sapproj (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Feb 05 12:06:31 2009
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9893
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4780) [dpnttool.c 357]
Kindly help me in getting the solution ASAP.
Thaks in Advance.
Kind Regards,
Mogileeswar

Your profile parameters are messed up; check your instance profile has below parameters:
jstartup/trimming_properties = off
jstartup/protocol = on
jstartup/vm/home = /opt/java1.4
jstartup/max_caches = 500
jstartup/release = 700
jstartup/instance_properties = $(jstartup/j2ee_properties):$(jstartup/sdm_properties)
j2ee/dbdriver = $(DIR_EXECUTABLE)/db2jcc.jar:$(DIR_EXECUTABLE)/db2jcc_license_cu.jar
rdisp/j2ee_start_control = 1
rdisp/j2ee_start = 1
rdisp/j2ee_libpath = $(DIR_EXECUTABLE)
exe/j2ee = $(DIR_EXECUTABLE)/jcontrol$(FT_EXE)
rdisp/j2ee_timeout = 600
rdisp/frfc_fallback = on
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00

"disp+work" process in not getting started after kernel upgradation

Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 55
M sid TNG
M systemid 562 (PC with Windows NT)
M relno 7410
M patchlevel 0
M patchno 42
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid 2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm) 24288 (1104)
M DpShMCreate: sizeof(tm_adm) 51472080 (256080)
M DpShMCreate: sizeof(ca_adm) 432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm) 7583152 (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm) 520080 (1016)
M DpShMCreate: sizeof(vmc_adm) 0 (3208)
M DpShMCreate: sizeof(wall_adm) (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm) (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm) (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm) 64
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c 2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M pid = 2392
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M workerType = DP_WORKER_DIAWP
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M report = > <
M action = 0
M tab_name = > <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for 64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
 711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tng

C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB

Jave is not coming up after SID refresh where as ABAP is Up

Recently I completed system refresh for Solution Manager 4.0 with DB SQL Server 2005 on Duel stack and Java is not coming up after SID refresh where as ABAP is Up.
Please advise where to check as i check Disp log and Java Dispatcher is not coming up and giving error DB connection.
Thanks
Sachin Sachdeva

How did you do the refresh? What method, export with SAPINST(both ABAP and Java)?
Post the DB connection error you are getting.
Can you connect to configtool?
Message was edited by:
Derek Galt

Camera not working properly after ios7 upgrade in iphone 4s

Iphone 4S
Camera not working properly after iOS7 upgrade.
It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
help me to solve this problem

Have you tried a battery pull? If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

CSS Service not coming up after reboot

I installed oracle 10.2.0.2 (X86_64) on SLES 9 (x86_64) NON_RAC (single instance with ASM) and the CSS service is not coming up after reboot. If i do localconif reset then it starts up but fail after every reboot. Here is the data to debug:
This is the tail of my $ORACLE_HOME/log/servername/alertservername.log
2008-03-06 22:16:32.587
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:32.588
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:33.217
[client(13472)]CRS-1001:The OCR was formatted using version 2.
2008-03-06 22:17:54.615
[cssd(13670)]CRS-1601:CSSD Reconfiguration complete. Active nodes are pune-srv-eps-02 .
u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is accessible through oracle user:
$ls -l /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
-rw-r--r-- 1 epsora epsdba 364544 2008-03-06 22:16 /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
This is the log file mentioned in above file:
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:16:32.579: [ OCROSD][2546869600]utread:3: problem reading buffer
5db000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ default][2546869600]a_init:7!: Backend init unsuccess
ful : [22]
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.676: [ OCRRAW][2546869600]propriowv: Vote information on di
sk 0 [u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr] is adjusted from
[0/0] to [2/2]
2008-03-06 22:16:33.217: [ OCRRAW][2546869600]propriniconfig:No 92 configuratio
n
2008-03-06 22:16:33.217: [ OCRAPI][2546869600]a_init:6a: Backend init successfu
l
This is tail of my ocssd.log
[    CSSD]2008-03-06 22:17:55.955 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a1b10) proc(0x7a4e70) pid(13754) proto(10:2:1:1)
[    CSSD]2008-03-06 22:17:56.455 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a3740) proc(0x7a4e70) pid(13773) proto(10:2:1:1)
[    CSSD]2008-03-06 22:17:56.460 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a5b10) proc(0x7a7f50) pid(13772) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:08.380 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:08.383 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:11.556 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7aa3c0) proc(0x7ac7d0) pid(13845) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:17.873 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7ad070) proc(0x7af480) pid(13828) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:22.700 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9850) proc(0x7a1e50) pid(14060) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:22.703 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a22b0) proc(0x7a9850) pid(14060) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:25.875 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a32b0) proc(0x7a1800) pid(14077) proto(10:2:1:1)
And this is my css.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:17:47.404: [ CSSCLNT][2549892096]clsssInitNative: connect failed,
rc 9
I checked on metalink and found that this error can occur due to some old oracle references or changes in the uid of users but this is fresh install no oracle was there before and we didnt' change the OS user's uid also.
Please let me know what else to check or SR is the only option?
Thanks
Daljit Singh

Do you mean CRS rather than CSS?
I note that your database is patched to 10.2.0.2 but your CRS is still at 10.2.0.1. Bring both to 10.2.0.3 and if that doesn't resolve the issue open an SR at metalink.
Do not install the January CPU ... it appears to have issues with RAC that we are currently investigating.

Databases are not coming up after server reboot(sun solaris).

Hi
OS - Sun OS 5.10 local zone. RDBMS version - 11.2.0.3
Databases are not coming up after server reboot.
We have verified the below points.
Cat/etc/init.d/oracle
$ORACLE_HOME/bin/oradism file permissions are 4550.
lock_sga is parameter set to false.
cat /var/opt/oracle/oratab entries are set to Y
Still Databases are not coming up after server reboot.
Please advise.

Hi,
Can you post further information from alert log. Doesn't coming up, means you needs to share the information some thing about your environmente settings about kernel parameter and init$ORACLE_SID parameters details.
That would be easy for others to look into it further to analyze things.
- Pavan Kumar N

Login page not coming up after applying patch 12374730

Hi ,
Login page is not coming up after applying patch 12374730.
OS : Solaris 10
Application release 12.1.3
Thanks,

Did you apply the patch successfully with no errors?
Yes
Do you have any invalid objects in the database?
NO
Did AutoConfig complete successfully?
Yes
Please check Apache log files for details about the error.
Thanks,
Hussein

SAP is not coming up after system refresh with Export/Import option

Hi,
I have exported Java 6.40 and finished the refresh successfully. And I imported the Java successfully. After importing Java, I restarted SAP but is not coming up. When I checked the dev_w0 trace file, I got the following information.
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Aug 05 10:48:17 2009
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
B New connection 0 created
M sysno 00
M sid IDS
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 247
M intno 20020600
M make: multithreaded, Unicode
M pid 844
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 844) [dpxxdisp.c 1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 20328 (1452)
M DpShMCreate: sizeof(tm_adm) 2969176 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05FE0040, size: 3391480)
M DpShMCreate: allocated sys_adm at 05FE0040
M DpShMCreate: allocated wp_adm at 05FE1B88
M DpShMCreate: allocated tm_adm_list at 05FE6AF0
M DpShMCreate: allocated tm_adm at 05FE6B18
M DpShMCreate: allocated wp_ca_adm at 062BB970
M DpShMCreate: allocated appc_ca_adm at 062C1730
M DpShMCreate: allocated comm_adm_list at 062C3670
M DpShMCreate: allocated comm_adm at 062C3688
M DpShMCreate: allocated vmc_adm_list at 0630A358
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0630A380
M DpShMCreate: allocated wall_adm at 0630A388
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 05 10:48:18 2009
M calling db_connect ...
C Prepending e:\oracle\IDS to Path.
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPIDS's password
C Connecting as /@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05B17398 05B1C458 05B1BEC0
C Attaching to DB Server IDS (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84)
C Starting user session (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84,usrhp=05B256B8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 4508]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 11395]
C Try to connect with default password
C Connecting as SAPIDS/<pwd>@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05B17398 05B1C458 05B1BEC0
C Starting user session (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84,usrhp=05B256B8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 4508]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 11395]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9708]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ord-sapproj_IDS_00 on host ord-sapproj (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Aug 05 10:48:18 2009
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9893
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 844) [dpnttool.c 357]
I have checked database connectivity with the command 'r3trans -d', it got finished with the return code 0012 and the trace.log file is showing the following information.
=======================================
4 ETW000 r3trans version 6.13 (release 640 - 17.07.08 - 08:11:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 05.08.2009 - 10:52:31
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Aug 05 10:52:34 2009 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 8449 0.008449
4 ETW000 [dev trc ,00000] using "f:\usr\sap\IDS\SYS\exe\run\dboraslib.dll"
4 ETW000 37 0.008486
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 18 0.008504
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 27 0.008531
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "640.00", patchlevel (0.220)
4 ETW000 219 0.008750
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 27 0.008777
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 36 0.008813
4 ETW000 [dev trc ,00000] New connection 0 created 26 0.008839
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 34 0.008873
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 22 0.008895
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 25 0.008920
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.008952
4 ETW000 [dev trc ,00000] Setting DIR_CLIENT_ORAHOME is not set as environment variable,
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 227 0.009179
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 130 0.009309
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 32 0.009341
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 23827 0.033168
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPIDS's password 34 0.033202
4 ETW000 [dev trc ,00000] Connecting as /@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
4 ETW000 35 0.033237
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 32 0.033269
4 ETW000 [dev trc ,00000] 0 UTF8 1 0253CDB0 02541E18 02541880
4 ETW000 112 0.033381
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 29 0.033410
4 ETW000 [dev trc ,00000] Allocating server context handle 25 0.033435
4 ETW000 [dev trc ,00000] Attaching to DB Server IDS (con_hdl=0,svchp=025417D4,srvhp=025423DC)
4 ETW000 51 0.033486
4 ETW000 [dev trc ,00000] Assigning server context 025423DC to service context 025417D4
4 ETW000 41860 0.075346
4 ETW000 [dev trc ,00000] Allocating user session handle 47 0.075393
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=025417D4,srvhp=025423DC,usrhp=0254AFA8)
4 ETW000 50 0.075443
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000 4381 0.079824
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 31 0.079855
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 23 0.079878
4 ETW000 [dev trc ,00000] Try to connect with default password 80 0.079958
4 ETW000 [dev trc ,00000] Connecting as SAPIDS/<pwd>@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
4 ETW000 28 0.079986
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 31 0.080017
4 ETW000 [dev trc ,00000] 0 UTF8 1 0253CDB0 02541E18 02541880
4 ETW000 32 0.080049
4 ETW000 [dev trc ,00000] Assigning username to user session 0254AFA8 19 0.080068
4 ETW000 [dev trc ,00000] Assigning password to user session 0254AFA8 25 0.080093
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=025417D4,srvhp=025423DC,usrhp=0254AFA8)
4 ETW000 32 0.080125
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000 1691 0.081816
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 28 0.081844
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 18 0.081862
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error 1017 performing CON [dblink#3 @ 428]
4 ETW000 119 0.081981
4 ETW000 [dblink ,00428] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 428]
4 ETW000 30 0.082011
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'IDS'"
=================================================================================
Kindly suggest me the solution to resolve the issue.
Thanks & regards,
Mogileeswar

Please check the logs it is clrerly mentioned thet your sapsystem is not able to connect to database.
ERROR => CONNECT failed with sql error '1017' [dbsloci.c 11395] B ***LOG BY2=> sql error 1017 performing CON [dbsh#3 @ 1204] [dbsh 1204 ] B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh 1204 ] B ***LOG BY2=> sql error 1017 performing CON [dblink#3 @ 428] [dblink 0428 ] B ***LOG BY0=> ORA-01017: invalid username/password
Check the Note------Note 713685 - Hom./Het.System Copy SAP Web AS 6.40
run these commands:
brconnect -u / -c -l E -f chpass -o SAPSR3 -password whatever_you_want
sqlplus /nolog @sapdba_role.sql SID NT
Also check the parameter DBS_ORA_SCHEMA is set to SAPSR3.
Also read note 400241.
Thanks
Rishi Abrol

ORACLE NOT COMING UP AFTER UPGRADE to 10.0.2.0.4

Hi
In an Oracle upgraded system from 10.0.2.0.2 to 10.0.2.0.4 , ORACLE is not coming up
with following messages
when i type SQL> startup force
ORA-01092: ORACLE instance terminated. Disconnection forced
also
When i type
hostname> ./dbua
am getting
JVMXM008: Error occured while initialising System ClassException in thread "main" Could not create the Java virtual machine.
Regards

Also find the last 100 lines from alert SID.log**************************
Specified value of sga_max_size is too small, bumping to 616562688
sskgpgetexecname failed to get name
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes                = 400
sessions                 = 800
event                    = 10028 trace name context forever, level 1, 10027 trace name context forever, level 1, 10162 trace name context forever, level 1, 38068 trace name context forever, level 100, 10629 trace name context forever, level 1, 38087 trace name context forever, level 1
sga_max_size             = 616562688
shared_pool_size         = 293601280
filesystemio_options     = setall
control_files            = /oracle/DBB/origlogA/cntrl/cntlrDBB.dbf, /oracle/DBB/origlogB/cntrl/cntrlDBB.dbf, /oracle/DBB/sapdata1/cntrl/cntrlDBB.dbf
control_file_record_keep_time= 30
db_block_size            = 8192
db_cache_size            = 293601280
compatible               = 10.2.0
log_archive_dest         = /oracle/DBB/oraarch/DBBarch
log_buffer               = 2040832
log_checkpoint_interval = 0
db_files                 = 254
log_checkpoints_to_alert = TRUE
dml_locks                = 4000
replication_dependency_tracking= FALSE
undo_management          = AUTO
undo_tablespace          = PSAPUNDO
inmemory_undo          = FALSE
undo_retention           = 43200
recyclebin               = off
remote_os_authent        = TRUE
remote_login_passwordfile= EXCLUSIVE
job_queue_processes      = 1
parallel_max_servers     = 20
parallel_execution_message_size= 16384
background_dump_dest     = /oracle/DBB/saptrace/background
user_dump_dest           = /oracle/DBB/saptrace/usertrace
max_dump_file_size       = 20000
core_dump_dest           = /oracle/DBB/saptrace/background
optimizer_features_enable= 10.2.0.1
sort_area_size           = 2097152
sort_area_retained_size = 0
db_name                  = DBB
open_cursors             = 800
sortelimination_cost_ratio= 10
btree_bitmap_plans     = FALSE
star_transformation_enabled= TRUE
parallel_threads_per_cpu = 1
query_rewrite_enabled    = FALSE
indexjoin_enabled      = FALSE
optimpeek_user_binds   = FALSE
pga_aggregate_target     = 386547056
workarea_size_policy     = AUTO
statistics_level         = typical
optimizermjc_enabled   = FALSE
PMON started with pid=2, OS id=1388620
PSP0 started with pid=3, OS id=1282090
MMAN started with pid=4, OS id=1110138
DBW0 started with pid=5, OS id=864434
LGWR started with pid=6, OS id=848030
CKPT started with pid=7, OS id=716928
SMON started with pid=8, OS id=1441840
RECO started with pid=9, OS id=1364174
CJQ0 started with pid=10, OS id=1355930
MMON started with pid=11, OS id=1351838
MMNL started with pid=12, OS id=1413306
Tue Oct 27 13:01:46 2009
ALTER DATABASE   MOUNT
Tue Oct 27 13:01:50 2009
Setting recovery target incarnation to 1
Tue Oct 27 13:01:50 2009
Successful mount of redo thread 1, with mount id 1022367290
Tue Oct 27 13:01:50 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE   MOUNT
Tue Oct 27 13:01:50 2009
ALTER DATABASE OPEN
Tue Oct 27 13:01:50 2009
Thread 1 opened at log sequence 4620
Current log# 4 seq# 4620 mem# 0: /oracle/DBB/origlogB/log_g14m1.dbf
Current log# 4 seq# 4620 mem# 1: /oracle/DBB/mirrlogB/log_g14m2.dbf
Successful open of redo thread 1
Tue Oct 27 13:01:50 2009
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Tue Oct 27 13:01:50 2009
SMON: enabling cache recovery
Tue Oct 27 13:01:50 2009
Errors in file /oracle/DBB/saptrace/usertrace/dbb_ora_1491064.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Tue Oct 27 13:01:50 2009
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Instance terminated by USER, pid = 1491064
ORA-1092 signalled during: ALTER DATABASE OPEN...

Solman system not coming up after Kerbel upgrade

Similar Messages

Maybe you are looking for