Solman upgr 710 - Error in Config step (Phase PREP_INTEGRATION/DYNSPCADD)

Dear SAP gurus,
I am performing an upgrade Solman701 to 710 using SOLMANUP. tool. Linux/Oracle
The upgrade got stuck on Configuration step (phase PREP_INTEGRATION/DYNSPCADD) wit the following Warning:
Manual Actions:
WARNING:Your source system is secured by the SAPCryptolib.
To keep the security setting, put a SAPCryptolib archive suitable for your server platform into the download directory.
Download the SAPCryptolib from the SAP Service Marketplace as described in  the SAP Note 455033 or comment out the corresponding SSF parameters at the system profile temporary during the upgrade.
I downloaded the SAPCryptolib (900000115.SAR) and put it on the download directory but when I ran the phase step/phase again it came up again the same error. I even "sapcar" it and put it on /usr/sap/trans/EPS/in but it still complains with the same error.
I also checked the note 1302772 but didtnt work either.
Anybody can give me some suggestions on how to go further?
Thanks in advance, Marc

Hello,
Did you try to put 'Extracted' version of .SAR file in the download directory ?
And did you just 'repeat' the phase from the same sessions of SolmanUp Or tried to stop SolmanUP and then started from the same phase ?
'I also checked the note 1302772 but didtnt work either.'
Note 1302772 is applicable only for SAP EhPi I think, not for SolmanUP.
Thanks

Similar Messages

  • Error in Import ABAP phase on slution manager - R3load-testconnect

    Hi all,
      I am installing solman and got error in Import ABAP phase
    here is the log
    WARNING 2010-05-20 08:13:27.982 Execution of the command "/usr/sap/SM7/SYS/exe/run/R3load -testconnect" finished with return code 127. Output: /usr/sap/SM7/SYS/exe/run/R3load: error while loading shared libraries: /oracle/client/10x_64/instantclient/libnnz10.so: cannot restore segment prot after reloc: Permission denied
    > R3trans -d
    This is R3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
    unicode enabled version
    2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/SM7/SYS/exe/run') or dbms_type ('ORA')"
    R3trans finished (0012).
    SQL> startup;
    ORACLE instance started.
    Total System Global Area 4613734400 bytes
    Fixed Size                  2090048 bytes
    Variable Size            2315258816 bytes
    Database Buffers         2281701376 bytes
    Redo Buffers               14684160 bytes
    Database mounted.
    ORA-01092: ORACLE instance terminated. Disconnection forced
    Please advice
    Regards
    Palle
    Edited by: palle26 on May 20, 2010 11:00 AM

    hi
        After insattaling oracle, i didn't apply oracle patch.
    when it throwed error , r3load-testconnect, then i stoped listener & applied patch and continued with the installation .
    DB is not getting started. when i used > startup;
    ORACLE instance started.
    Total System Global Area 4613734400 bytes
    Fixed Size                  2090048 bytes
    Variable Size            2315258816 bytes
    Database Buffers         2281701376 bytes
    Redo Buffers               14684160 bytes
    Database mounted.
    ORA-01092: ORACLE instance terminated. Disconnection forced
    R3trans -d
    This is R3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
    unicode enabled version
    2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'SM7'"
    R3trans finished (0012).
    SQL> select status from v$instance;
    ERROR:
    ORA-03114: not connected to ORACLE
    one of the blog said to restart the server. i did it but now if i say hotname
    it is giving full domain name as sap-server.lgcnsglobal.com instead of sap-server
    Do i need to uninstall oracle and do it again , if so how do i uninstall oracle?
    regards
    sandhya

  • Error occured in the phase MOVE NAMETABS while updating patch.

    Hi Gurus
    When i implementing a SP15 to SP16 in a queue, i got the Dump.
    Please help me in this issue.
    The import was stopped, since an error occurred during the phase
       IMPORT_PROPER, which the Support Package Manager is unable to resolve
       without your input.
       After you have corrected the cause of the error, continue with the
       import by choosing Support Package -> Import queue from the initial
       screen of the Support Package Manager.
       The following details help you to analyze the problem:
           -   Error in phase: IMPORT_PROPER
           -   Reason for error: TP_STEP_FAILURE
           -   Return code: 0008
           -   Error message: OCS Package ALL, tp step "6", return code 0008
       Notes on phase IMPORT_PROPER
       In this phase repository objects and table entries are imported. This
       phase can terminate due to the following reasons:
       o   TP_INTERFACE_FAILURE: The tp interface could not be called.
       o   TP_FAILURE: The program tp could not be executed. For more
           information on this, see the SLOG or ALOG log file.
       o   TP_STEP_FAILURE: A tp step could not be executed. To find the cause
           of the error, see the appropriate log, such as the import log.
           If the cancelation message contains a tp step 6, N or S, the step in
           question is independent of the transport request. You can find these
           logs under the node Import steps not specific to transport request
           in the log overview.
           Alternatively, you can find these logs in the following files in the
           log directory of your transport directory (usually:
           /usr/sap/trans/log):
        -   tp Step 6: P<YY><MM><DD>.<SID>
        -   tp Step N: N<YY><MM><DD>.<SID>
        -   tp Step S: DS<YY><MM><DD>.<SID>
        You can display these files using the report RSPUTPRT or by calling
        transaction AL11.
    A prerequisite of the Support Package Manager is that the Change and
    Transport System (CTS) is configured correctly. For more detailed
    information, read the online documentation available from Help -> SAP
    Library -> mySAP Technology Components -> SAP Web Application Server ->
    Change and Transport System .
    A list of the most important SAP Notes for Online Correction Support
    (OCS) is available in SAP Note 97620, which is updated regularly.
    Regards,
    Ganesh

    Hi jazz,
    I want to update the patch SAPKA70016 for SAP_ABA component.
    Queue log
    System              : ISP
    tp path             : tp
    Version and release: 372.04.36 700
    Activate inactive nametabs
    End date and time : 20081215012202
    Ended with return code:  ===> 8 <===
      TP request log is
    START CMDIMPORT            ISP L      20081222014354              DDIC         usirs254 20081222014354043
    STOP  CMDIMPORT            ISP L      20081222014401              DDIC         usirs254 20081222014354043
    START DD IMPORT            ISP H      20081222014540              DDIC         usirs254 20081222014540574
    STOP  DD IMPORT            ISP H      20081222014616              DDIC         usirs254 20081222014540574
    START DD ACTIVATION        ISP A      20081222014617              DDIC         usirs254
    START tp_getprots          ISP J      20081222014617              DDIC         usirs254
    STOP  tp_getprots          ISP J      20081222014723              DDIC         usirs254
    STOP  DD ACTIVATION        ISP A      20081222014723              DDIC         usirs254
    START imp all              ISP        20081222014723              DDIC         usirs254 20081222014723434
    INFO: event SAP_IMPORT_START triggered successfully
    START DISTRIBUTION OF DD-O ISP S      20081222014723              DDIC         usirs254 20081222014723434
    START tp_getprots          ISP S      20081222014723              DDIC         usirs254 20081222014723434
    STOP  tp_getprots          ISP S      20081222014726              DDIC         usirs254 20081222014723434
    STOP  DISTRIBUTION OF DD-O ISP S      20081222014726              DDIC         usirs254 20081222014723434
    INFO  TBATG CONVERSION OF  ISP N      not needed                  DDIC         usirs254 20081222014723434
    START MOVE NAMETABS        ISP 6      20081222014726              DDIC         usirs254 20081222014723434
    START tp_getprots          ISP P      20081222014726              DDIC         usirs254 20081222014723434
    ERROR ALL                  ISP 6 0008 20081222014743              DDIC         usirs254 20081222014723434
    STOP  tp_getprots          ISP P      20081222014747              DDIC         usirs254 20081222014723434
    STOP  MOVE NAMETABS        ISP 6      20081222014747              DDIC         usirs254 20081222014723434
    ERROR: stopping on error 8 during MOVE NAMETABS
    START INFORM SAP-SYSTEM OF ISP Q      20081222014747              DDIC         usirs254 20081222014723434
    START tp_getprots          ISP Q      20081222014747              DDIC         usirs254 20081222014723434
    STOP  tp_getprots          ISP Q      20081222014748              DDIC         usirs254 20081222014723434
    STOP  INFORM SAP-SYSTEM OF ISP Q      20081222014748              DDIC         usirs254 20081222014723434
    STOP  imp all              ISP   0008 20081222014748              DDIC         usirs254 20081222014723434
    START CMDIMPORT            ISP L      20081222015155              DDIC         usirs254 20081222015155637
    STOP  CMDIMPORT            ISP L      20081222015158              DDIC         usirs254 20081222015155637

  • Error during Config of Essbase Server11.1.2.1 in Linux

    Hi All,
    I am installing Essbase server 11.1.2.1 in linux box and i have downloaded the below files from edelivery.oracl.com
    "V25528-01-Part 1-Linux.zip"
    "V25529-01-Part 2-Linux.zip"
    "V25530-01-Part 3-Linux.zip"
    "V25531-01-Part 4-Linux.zip"
    "V25459-01--Part 5-Linux.zip"
    "V25460-01-Part 6-Linux.zip"
    "V25461-01-Part 7-Linux.zip"
    "V25464-01-Essbase Release-1-Linux.zip"
    "V25466-01-Essbase Clients-Linux.zip"
    "V25532-01-Essbase Release-2-Linux.zip"
    "V25494-01-Additional Content-Linux.zip"
    "V25527-01-System Installer-Linux.zip"
    "V33278-01-EPM System Release-Linux.zip"
    i have sucessfully installed essbase server howerver when i am trying to configure it says Jar files are missing. I have uninstalled and installed it again twice but not luck, getting the same error. Below are my installation and config steps. Kindly help me in this.
    Select the product components:
    Oracle EPM System - 0:Select, 1:Deselect, 2:Expand, 3:Cancel [0]:2
    Foundation Services - 0:Select, 1:Deselect, 2:Expand, 3:Cancel [0]:2
    Foundation Components - 0:Select, 1:Deselect, 2:Expand, 3:Cancel [0]:2
    Foundation Services Web Applications - 0:Select, 1:Deselect, 3:Cancel [0]:
    Static Content Files - 0:Select, 1:Deselect, 3:Cancel [0]:
    Oracle HTTP Server - 0:Select, 1:Deselect, 3:Cancel [0]:
    WebLogic Application Server - 0:Select, 1:Deselect, 3:Cancel [0]:
    Essbase - 0:Select, 1:Deselect, 2:Expand, 3:Cancel [0]:2
    Essbase Client - 0:Select, 1:Deselect, 2:Expand, 3:Cancel [0]:1
    Essbase Administration Services Web Application - 0:Select, 1:Deselect, 3:Cancel [0]:1
    Provider Services Web Application - 0:Select, 1:Deselect, 3:Cancel [0]:1
    Essbase Integration Services - 0:Select, 1:Deselect, 3:Cancel [0]:1
    Essbase Studio Server - 0:Select, 1:Deselect, 3:Cancel [0]:1
    Essbase Server - 0:Select, 1:Deselect, 3:Cancel [0]:
    Press 0 for Help, 1 for Previous, 2 for Next, 3 to Cancel or 4 to Redisplay [2]:
    Checking for available disk space in the /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1 directory.
    The selected components require 848 MB free disk space.
    You have 15538 MB free disk space.
    EPM Oracle Home: /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1
    Common Components
    Essbase Product Common Components
    Product Common Components
    Oracle Common Files
    Tools
    Foundation Services
    WebLogic Application Server
    Oracle HTTP Server
    Static Content Files
    Workspace Web Application
    Foundation Services Web Applications
    Essbase
    Essbase Server
    The features being installed are listed above. Click Next to begin installing.
    Press 0 for Help, 1 for Previous, 2 for Next, 3 to Cancel, 4 to Redisplay or 5 to Save [2]:
    Installation in progress
    EPM Oracle Home: /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1
    Common Components
    Essbase Product Common Components
    Product Common Components
    Oracle Common Files
    Tools
    Foundation Services
    WebLogic Application Server
    Oracle HTTP Server
    Static Content Files
    Workspace Web Application
    Foundation Services Web Applications
    Essbase
    Essbase Server
    Installation completed.
    Click Finish to exit EPM System Installer, or click Configure to configure the product.
    Press 0 for Help, 2 to Finish, 4 to Redisplay or 5 to Configure [2]: 5
    Launching the Hyperion Configuration Utility, please wait...
    Running preconfig checks...
    Running EPM_ORACLE_HOME check...
    EPM_ORACLE_HOME environment variable value: /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1
    JAVA_HOME environment variable value: /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/../jdk160_21
    EPM_ORACLE_HOME check succeeded
    Running .oracle.products check... .oracle.products check succeeded
    Running Jars manifest check...
    Time spent for manifests parsing: 578 ms
    Maximum jars depth achieved: 6, while restriction was: unrestricted
    Parsed 419 manifests
    Total jars and classpath entries encountered: 419
    Total not-existing referenced classpath entries count: 67
    Total classpath elements to check: 59
    ERROR: /appl/hypr/amihysbx/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar not exists; file depth: 2; referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
    ERROR: /appl/hypr/amihysbx/Oracle/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar not exists; file depth: 2; referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
    ERROR: /appl/hypr/amihysbx/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar not exists; file depth: 2; referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_soa.jar referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
    ERROR: /appl/hypr/amihysbx/Oracle/Middleware/oracle_common/modules/velocity-dep-1.4.jar not exists; file depth: 1; referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
    ERROR: /appl/hypr/amihysbx/Oracle/Middleware/oracle_common/modules/args4j-2.0.9.jar not exists; file depth: 1; referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
    ERROR: /appl/hypr/amihysbx/Oracle/Middleware/oracle_common/jlib/jewt4.jar not exists; file depth: 1; referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
    ERROR: /appl/hypr/amihysbx/Oracle/Middleware/oracle_common/modules/org.apache.commons.beanutils_1.6.jar not exists; file depth: 1; referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
    ERROR: /appl/hypr/amihysbx/Oracle/Middleware/oracle_common/jlib/share.jar not exists; file depth: 1; referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
    ERROR: /appl/hypr/amihysbx/Oracle/Middleware/oracle_common/modules/oracle.http_client_11.1.1.jar not exists; file depth: 2; referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_soa.jar referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
    ERROR: /appl/hypr/amihysbx/Oracle/Middleware/oracle_common/modules/oracle.jsf_1.2.9/glassfish.jstl_1.2.0.1.jar not exists; file depth: 2; referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
    ERROR: /appl/hypr/amihysbx/Oracle/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar not exists; file depth: 2; referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /appl/hypr/amihysbx/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
    FATAL ERROR: Jars manifest check failed with message "Some referenced jars do not exist"
    Exiting in 30 seconds
    Regards,
    AS
    Edited by: Don'tKnow999 on Oct 17, 2012 1:26 AM

    Hi john,
    Thanks for the reply. I have looked into that document. when i checked the orainventory file it has got full permissions.
    drwxrwxrwx 6 oracle oinstall 4096 Oct 17 04:17 oraInventory
    Kindly help me out. Anything else that i need to look into.
    Regards,
    AS

  • Error in 29 step of SAP Netweaver 4.0 Portal for java on windown7 ultimate.

    Dear All,
    Im facing problem while installing "SAP Netweaver Portal Server 4.0" for java on my OS "windows7 ultimate" laptop.
    Im getting error in 29th step while configuring J2EE engine. Can someone help, i will be highly obliged.
    INFO 2010-01-27 18:56:04
    Execute step runBatchconfig of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|3|0.
    INFO 2010-01-27 18:56:11
    Removing file C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\batchconfig.properties.
    INFO 2010-01-27 18:56:11
    Creating file C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\batchconfig.properties.
    WARNING 2010-01-27 18:56:11
    Error 234 (More data is available.
    ) in execution of a 'RegEnumValue' function, line (377), with parameter ().
    ERROR 2010-01-27 18:56:11
    MUT-03001  Value of type HKeyClass has illegal value '0'.
    WARNING 2010-01-27 18:56:11
    System call failed. Error 1307 (This security ID may not be assigned as the owner of this object.
    ) in execution of system call 'SetTokenInformation' with parameter (TokenOwner, Administrators), line (855) in file (synxccuren.cpp).
    INFO 2010-01-27 18:56:11
    Switched to user: j2eadm.
    INFO 2010-01-27 18:56:11
    Creating file C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\batchXmlGen.log.
    WARNING 2010-01-27 18:56:11
    System call failed. Error 1307 (This security ID may not be assigned as the owner of this object.
    ) in execution of system call 'SetTokenInformation' with parameter (TokenOwner, Administrators), line (855) in file (synxccuren.cpp).
    INFO 2010-01-27 18:56:11
    Switched to user: j2eadm.
    INFO 2010-01-27 18:56:11
    Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL.
    INFO 2010-01-27 18:56:11
    Output of C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.xmlgenerator.ConfigXmlGenerator "
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jce.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_smime.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib;C:\sapdb\programs\runtime\jar\sapdbc.jar" "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/batchconfig.properties" -short is written to the logfile batchXmlGen.log.
    INFO 2010-01-27 18:56:12
    Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.xmlgenerator.ConfigXmlGenerator "
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jce.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_smime.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib;C:\sapdb\programs\runtime\jar\sapdbc.jar" "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/batchconfig.properties" -short" finished with return code 0. Output:
    Warning : C:\sapdb\programs\runtime\jar\sapdbc.jar file stated but does not exist !
    SAP J2EE Engine Batch Config Xml Generator
    Batch Config Xml successfully generated to BatchConfig.xml
    INFO 2010-01-27 18:56:12
    Creating file C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\extractBootstrap.log.
    INFO 2010-01-27 18:56:12
    Output of C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.BatchConfig "
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jce.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_smime.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib;C:\sapdb\programs\runtime\jar\sapdbc.jar" "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/BatchConfig.xml" is written to the logfile extractBootstrap.log.
    WARNING 2010-01-27 18:56:14
    Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.BatchConfig "
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jce.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_smime.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;
    Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib;C:\sapdb\programs\runtime\jar\sapdbc.jar" "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/BatchConfig.xml"" finished with return code 31415. Output:
    PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
    Error while connecting to DB.
    ERROR 2010-01-27 18:56:14
    CJS-30059  J2EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile extractBootstrap.log: '
    PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
    Error while connecting to DB.
    ERROR 2010-01-27 18:56:14
    FCO-00011  The step runBatchconfig with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|3|0|runBatchconfig was executed with status ERROR .

    Dear All, Kindly see the log of extractbootstrap.log ...
    PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
    Error while connecting to DB.
    thx waiting for response.
    Akhilesh

  • Severe error(s) occurred in phase PREP_INSTALL/SHDINST_OS Last error code set: Process H:\SUM\abap\exe/sapstartsrv.exe exited with -1

    Hi Experts ,
    Currently performing EHP7 upgrade I have faced error during the configuration phase , below attached was the error screenshot .
    error logs shows the below :
    Executing module 'PREP_INSTALL'.
    Execution of PREPARE module "Installation" begins at 20140302202456
    # Starting phase execution with maxpar = 6, scheduled: 14x'-'
    CURRENTPHASE PREP_INSTALL/SHDINST_OS
    ...started at 20140302202456
    # Using phase log file 'SHDINST_OS.LOG'.
    ..finished at 20140302202457 with status ABORTED.
    # Error message set: 'Process H:\SUM\abap\exe/sapstartsrv.exe exited with -1, see 'H:\SUM\abap\log\SAPup.ECO' for details'
    .begin dialog at 20140302202459
    SHDINST_OS log :
    1 ETQ399 Possibly the password for user ISNET\SAPServiceDEC entered in phase
    1 ETQ399 INITPUT was wrong. You can reset it by calling 'SAPup set stdpar'.
    1 ETQ399 Try to execute SAPSTARTSRV.EXE manually using the following syntax:
    1 ETQ399 H:\SUM\abap\exe\sapstartsrv.exe -r
    1 ETQ399 -p H:\SUM\abap\DEC\SYS\profile\START_DVEBMGS01_SAPECCDV -s DEC -n 01
    1 ETQ399 -U ISNET\SAPServiceDEC -P <PASSWORD> -e ISNET\decadm
    1 ETQ399 and check if the service SAPDEC_01 can be stopped and restarted.
    1EETQ399 Last error code set is: Process H:\SUM\abap\exe/sapstartsrv.exe exited with -1, see 'H:\SUM\abap\log\SAPup.ECO' for details
    1EETQ204 Upgrade phase "SHDINST_OS" aborted with severe errors ("20140302202457")
    Kindly advice to fix

    Hi Mohan,
    Solution of your issue is already present in SHDINST_OS.LOG
    Possibly the password for user ISNET\SAPServiceDEC entered in phase
    1 ETQ399 INITPUT was wrong. You can reset it by calling 'SAPup set stdpar'.
    1 ETQ399 Try to execute SAPSTARTSRV.EXE manually using the following syntax:
    1 ETQ399 H:\SUM\abap\exe\sapstartsrv.exe -r
    1 ETQ399 -p H:\SUM\abap\DEC\SYS\profile\START_DVEBMGS01_SAPECCDV -s DEC -n 01
    1 ETQ399 -U ISNET\SAPServiceDEC -P <PASSWORD> -e ISNET\decadm
    1 ETQ399 and check if the service SAPDEC_01 can be stopped and restarted.
    Read the log carefully.Have you performed the above mentioned steps from SHDINST_OS.LOG file at your end.
    Also just give a full restart your server,up all the required services & confirm the execution of the phase.
    Thanks,
    Gaurav

  • Errors in DDIC Activation phase during upgrade.

    Hi,
    Title: Errors in DDIC Activation phase during upgrade.
    During preprocessing phase (phase ACT_UPG) we got many DDIC activation errors such as:
    SAPup broke during phase ACT_UPG in module MAIN_SHDRUN / Shadow System Operations: SPDD and Activation.
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCI702.CPE
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1EEDO519 "Data Element" "/BI0/OICH_AT" could not be activated
    1EEDO519 "Data Element" "/BI0/OICREA_TIME" could not be activated
    1 ETP111 exit code           : "8"
    We have searched the SDN, many posts say that we have to just activate them. But my question is where - in source system OR in Shadow system?
    We assumed it is Source system (please correct if it is wrong), unlocked the system and logged in as normal user and tried to activate the Data Element. Now, it says "Search Help /BI0/OICH_AT is not active or contains no parameter".   How to go about it?
    If it is Shadow System, how can i unlock the system?
    Many thanks,
    Mohan.

    Dear Mohan,
    There are search helps configured for the dataelements in ACTUPG.ELG. These search helps were created by mistake by the system.
    The search helps can be deleted manually in the shadow instance.
    In this case you should remove these fields in se11 (in your shadow instance) as the Search help shouldn't exist.
    You should do this step for all data elements shown in the log ACTUPG.ELG:
    For example: SE11 -> /BI0/OICH_AT -> Change -> Tab "Further characteristics"
    1. Goto SE11:
    2. Select Data type and fill "/BI0/OICH_AT" and display
    3. Select the tab "Further Characteristics" and
    4. Remove the values for fields "Name" and "Parameters"
       then click on icon "Activate"
    Please do the same for the other object.
    But before performing above steps you need to unlock the shadow instance by the following command:
    SAPup unlockshd <SID>
    (if using SAPup)
    SAPehpi unlockshd <SID>
    (if using SAPehpi)
    Also do not forget to lock the shadow system again after performing the steps and continuing the upgrade by the following command:
    SAPup lockshd <SID>
    (if using SAPup)
    SAPehpi lockshd <SID>
    (if using SAPehpi)
    You can logon to your shadow system with any different user than DDIC.
    Best Regards,
    Abhishek
    Edited by: Abhishek Srivastava on Oct 17, 2011 6:26 PM

  • Sapinst error at import abap phase

    Hi experts,
    i am getting error at import abap phase. please have you look and let me know your inputs
    ERROR      2011-08-31 22:55:27.730 [sixxcstepexecute.cpp:937]
    FCO-00011  The step runMigrationMonitor with step key |NW_Doublestack_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|abapload|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|
    runMigrationMonitor was executed with status ERROR
    ( Last error reported by the step:
    Execution of the command "/opt/java1.5/bin/java -classpath migmon.jar -showversion -Xmx1024m -d64 com.sap.inst.migmon.imp.ImportMonitor -sapinst"
    finished with status TST_ERROR.)
    Regards
    Srinivas

    Dear Srinivas,
    I hope this may problem with as follwing
    1)This had happened as a particular DVD was not copied properly You should copy it again and started it  may be !
    2) Please check Snote for Java  : 716926 & 1426759
    Thanks
    Mithun

  • Error on import abap phase(ecc6.0 on db2)

    Hi,
       Iam getting error on import abap phase : the transaction log for database is full. SQLSTATE=57011.
    my log dirs are available space.guide me for same to resolve the issue.
    Thanku

    Hi,
    I assume that
    Path to log files
    should read  "\db2\GMI\logdir\NODE0000" ?
    If yes, this is ok.
    To increase the size of logspace available to the database you have to modify the parameters LOGPRIMARY and/or LOGSECOND and/or LOGFILSIZ.
    The overall space consumed in "db2\GMI\logdir\NODE0000" is detemined  by:
    (logprimary + logsecond) * (logfilsiz + 2 ) * 4096
    Assuming that there is enough free space in the above directory, you could in a first step double the amount of LOGPRIMARY and LOGFILSIZ thus increasing the available logspace by factor 4.
    Please be aware: To make these changes happen, you have to deactivate / reactivate your database.

  • The import was stopped, an error occurred during the phase DDIC_ACTIVATION

    Dear all,
    When I import the SAP_BASIS support package SAPKB70019 , it appears the error as below :
    The import was stopped, since an error occurred during the phase
    DDIC_ACTIVATION, which the Support Package Manager is unable to resolve
    without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Support Package -> Import queue from the initial
    screen of the Support Package Manager.
    The following details help you to analyze the problem:
         -   Error in phase: DDIC_ACTIVATION
         -   Reason for error: TP_STEP_FAILURE
         -   Return code: 0008
         -   Error message: OCS Package SAPKB70019, tp step A, return code
             0008
    Notes on phase DDIC_ACTIVATION
    In this phase the imported Dictionary objects are activated. This phase
    can terminate due to the following reasons:
    o   TP_INTERFACE_FAILURE: The tp interface could not be called.
    o   TP_FAILURE: The program tp could not be executed. For more
         information, see the SLOG or ALOG log file.
    o   TP_STEP_FAILURE: The tp step DDIC activation could not be performed
         successfully. To see the cause of the error in the activation log,
         choose  Goto -> Log -> Queue.
         If you import two or more Support Packages in one queue, and you do
         not activate them in the correct sequence, activation errors may
         occur. In this case, the activation errors disappear when you repeat
         the activation run. To do this, choose Support Package -> Import
         Support Package Queue.
        A prerequisite of the Support Package Manager is that the Change and
        Transport System (CTS) is configured correctly. For more detailed
        information, read the online documentation available from Help -> SAP
        Library -> mySAP Technology Components -> SAP Web Application Server ->
        Change and Transport System .
        A list of the most important SAP Notes for Online Correction Support
        (OCS) is available in SAP Note 97620, which is updated regularly.
    I have used se11 to avtive the domain SEFS_CRAWL_ALGORITHM , but the error still exist.
    Hope anyone can help. Thanks!
    B.R
    Michael

    P762713 wrote:>
    > Hi ,
    >
    >     This is general issue now a days occuring in Support Packs .The only solution for this issue is to delete structure ::
    >
    > these were the structure deleted from system afterwards patches were installed successfully.
    >
    > /1PYXXFO/SAP_PAYSLIP_____L0001
    > /1PYXXFO/SAP_PAYSLIP_____T0001
    > /1PYXXFO/SAP_PAYSLIP
    >
    > /1PYXXFO/SAP_PAYSLIP_____L0020
    > /1PYXXFO/SAP_PAYSLIP_____T0020
    >
    > You can do this via Tcode se11 .give these info in data type & in turn you have to delete 1PYXXFO/SAP_PAYSLIP also.This has solved my issue & after this support pack went fine.
    >
    > Thanks..
    > Mohit
    >
    > Edited by: mohit gupta on Sep 23, 2009 9:15 AM
    Hi, mohit
          I have tried to use the t-code se11 to delete the structures, but the system telled me that they are all not exist .
    A part of the queue log as below:
       Field name KEY is reserved (Do not use structure as include in DB table)
       Field name PRIOR is reserved (Do not use structure as include in DB table)
       Field KEY: Component type or domain used not active or does not exist
       Exactly one field SPRAS of type LANG: Selection as text language possible
      Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0001 cannot be generated
       Enhancement category for table missing
       Enhancement category for include or subtype missing
       Field name KEY is reserved (Do not use structure as include in DB table)
       Field name PRIOR is reserved (Do not use structure as include in DB table)
       Field KEY: Component type or domain used not active or does not exist
       Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0020 cannot be generated
       Enhancement category for table missing
       Enhancement category for include or subtype missing
       Field name KEY is reserved (Do not use structure as include in DB table)
       Field name PRIOR is reserved (Do not use structure as include in DB table)
       Exactly one field SPRAS of type LANG: Selection as text language possible
       Enhancement category for table missing
    who can help me ?
    thank you very much
    BR.
    Michael
    Edited by: Michael Hong on Sep 23, 2009 12:36 PM

  • Sapinstallation error in second step Install common system File.

    Hi,
    I am installing the SOLMAN on Linux RHEL5 and i am facing the error in second step Install common system File .
    sapinst.log  ERROR Logs ;
    Output of /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh is written to the logfile installsapinit.sh.log.
    WARNING 2011-08-15 09:56:21.770
    Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
    /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
    ERROR 2011-08-15 09:56:21.774
    MUT-03011  Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
    /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
    ERROR 2011-08-15 09:56:21.913
    FCO-00011  The step installSAPInit with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_System|ind|ind|ind|ind|system|0|installSAPInit was executed with status ERROR ( Last error reported by the step: Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
    /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found).
    Can any one please help me on this...

    Hello,
    the "uname" command is part of the coreutils package on RHEL. Please check if the coreutils package is installed:
    rpm -qa | grep -i coreutils
    If the coreutils package is not installed you can install it with
    yum install coreutils
    Regards,
    Frank

  • What are the config steps for contract mass change and quota arrangement?

    Hi friends
    what are the config steps for contract mass change and quota arrangement?
    Regards
    Raj Kumar

    Process Flow
    The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
           1.      Search for contracts
    You search for and select the contracts or the contract hierarchy that you want to change.
    Contracts that have the status Closed cannot be changed.
           2.      Define mass changes
    You specify the changes you want to make.
    You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
    Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
           3.      Simulate mass changes
    Here you can perform a trial run of your mass changes. This simulation step is optional.
    We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
    You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
    Background processing
    The system processes the changes in the background.
    If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
    The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
    Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
    The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
           4.      Carry out mass changes
    Here you apply the changes to the contracts.
    You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

  • Error: null/config/deploy.properties (No such file or directory)

    Hi,
    I installed Weblogic 10.3.5, SOA Suite 11.1.1.5 and the installed AIA 11.1.1.5. Install completes successfully and everything seems to be up and running for AIA in the Enterprise Manager but when I go to the following
    http://hostname:8001/AIA
    Login and click on the 'About AIA' on the top right hand corner I get the following error
    Error: null/config/deploy.properties (No such file or directory)
    I have re-installed and installed it in 3 environments with same results, so I am thinking I am missing a step somewhere. Any advice on how to fix this issue?
    Thanks
    Jaco

    Hi Jaco,
    This issue is fixed in AIA 11.1.1.6.0 version. Either upgrade your AIA version to 11.1.1.6.0 or apply RUP2(Patch#13247584) on AIA 11.1.1.5.0.
    Regards
    Siva Shankar
    Tech Democracy

  • Talent Management - PDF Docs IMG Config Step

    Hello,
    We are having some issues with the configuration step u201CAssign Application Forms to Elements of PDF-Based Documentsu201D.
    Here are the steps we have taken so far:
    1) Copied the Application Forms from Client 000 (HRTMC_RM_COVER, HRTMC_RM_TALENT_AGENDA_TOPIC, HRTMC_TALENT_PROFILE, HRTMC_TALENT_SHORT_PROFILE) to our Sandbox & Development Clients
    2) Set u2018Use Complex Bundlingu2019 to u201Ctrueu201D via FPCONNECT (SM31)
    3) Attempted to add the different u201CParameter valuesu201D HRTMC values (specified above) to the IMG config step assign application forms to elements of pdf-based docs
    When trying to complete #3, we receive an error u2018enter a valid valueu2019. I checked both the Application Forms and the Forms Class and these objects exist, and are active. We even re-transported the objects to see if that was the problem, but it did not work.
    Any thoughts to why we are receiving this message?

    Can anyone tell me how doea the portal talent management configuration work???

  • EHP1 upgrade error in PREP_INPUT..phase

    Hello,
    I am doing EHP1 upgrade and getting error in EHPI during the PREP_INPUT/KX_CPYORG! phase.
    Below is the error:
    Severe error(s) occured in phase PREP_INPUT/KX_CPYORG!
    Last error code set: Cannot open '/usr/sap/<SID>/SYS/exe/run/dbatoolsora.lst': No such file or directory
    It complains about dabtoolsora.lst file not existing in /SYS/exe/run Dir. This is because our DB is in separate machine/host and the CI is in separate. Hence the file mentioned above only exist in */SYS/exe/run Dir of DB host.
    Can anyone please suggest what steps should be taken to resolve this issue? Do i need to copy that file manually to the CI host's */SYS/exe/run Directory and then repeat the EHPI steps again?
    Any help would be greatly appreciated. Thanks.

    I know this answer is too late for your question, but it's still the top google hit for this message, so I'm leaving this here for others.
    SUM still has this behavior as of 1.0 SP6.  One workaround is to copy dbatoolsora.lst from your DB server kernel directory, and create wrapper scripts which will SSH from the CI to the DB and run the brtools commands that SUM would want to run.
    Here's an example of such a script, for brtools:
    #!/bin/csh
    ssh $SAPDBHOST brtools $*
    So, you'd have a script like this for brarchive, brbackup, and the other br* tools mentioned in dbatoolsora.lst, each containing the name of the command to run on the db server.
    Be sure to look in dbatoolsora.lst for a list of other files it may expect to find.

Maybe you are looking for

  • How do I transfer Lightroom 4 license from one computer to another?

    Hi Adobe Community, Recently I have purchased a new Windows laptop to replace an older one; in my attempt to transition all files and programs to the new one I found some difficulty in the transferring of lightroom 4. I know that in order to transfer

  • Is there a way to programmatically tell what version of LabVIEW a VI is compiled in?

    Is there a way to tell programmatically what version of LabVIEW a VI is compiled in? LabVIEW seems to know.  If you click on "List Unsaved Changes", it (sometimes?) tells you the version of LabVIEW that the VI is already saved under (i.e., 8.0 instea

  • Screen flashes pink with yellow apple just after start up

    My screen will flash pink with a yellow apple icon just after the spinning gears has stopped when I start up.

  • Screen now has a yellow tinge...

    Last night I started up my G5. I clicked on mail and while moving the arrow to select an email my screen changed to a yellowish tinge. My computer works fine otherwise. I have tried fixing it in preferences, with no luck. Have I clicked on something

  • DefaultServlet?

    I've figured out how to manipulate the welcome-file-list tag in web.xml for tomcat to bring up the desired web page if someone hits my site without specifying a page (e.g. www.mysite.com will take them to www.mysite.com/index.html). But, my index pag