SolMan-User switch the Trace on/off in managed System

Hello,
I faced the follow problem. I need a trace in some managed System through 2 or 3 days. If start the Trace in ST01 in some satellite system (ERP-PRO for example ) this will be interrupted by SOLMANCSM100 at certain time daily. I analyzed the Batch jobs but fond nothing.
Does somebody noes what process or job do it and where is it?
Best regards
Vladimir Golovtchiner

Hi,
Based on my checks, in my opinion its best to open an OSS msg, as most of the time it will require the message processor on SAP side to apply some internal tool to resolve this. Since it is a matter with package stuck scenario.
You may want to open under BC-UPG-OCS
Hope this helps.
Cheers
SH

Similar Messages

Hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

Dear Paul, thank you very much for your time and answer, I followed those steps, somehow it helped the performance of my Imac, is faster now, but the screen issue about the very High contrast colours is still there. Since I am a photographer I am very depending on the screen calibration. I am worried that I came to damage the video card when I shut down the computer from the swicth when It was frozed.

TS1589 I have to reboot my BTinfinity router to enable me to link my ipod to Airport express. When it is connected it works perfectly, but it is getting a bind to have to keep switching the router power off. Any one help???

I have to reboot my BTinfinity router to enable me to link my ipod or my iphone to Airport express. When it is connected it works perfectly, I use it to play music through my BOSE soundwave, but it is getting a bind to have to keep switching the router power off. Any one help???
Ipod touch: 4th generation Upto date software
Airport Express: Latest model
Iphone 5: Upto date software

This can sometimes be the result of a faulty/damaaged USB sync cable. Do you have another cable you could test it out with?
B-rock

HT1490 When my macbook is fully charged, does the charger switch the power supply off, or does it continue to 'charge'?

When my macbook is fully charged, does the charger switch the power supply off, or does it continue to 'charge'?
(If I leave my laptop to charge whilst I'm out and it reaches 'fully charged' but is still switched on, will this continue to 'charge' my laptop? Or will it destroy my batter over time?)

When the charge cycle completes, the pilot light on the MagSafe connector changes from orange to green. At that point the battery will be kept in standby mode, and the computer will be kept running with electrical power from the charger. If you want to keep an eye of where the power is coming from, get the latest release of the Coconut Battery utility: http://www.coconut-flavour.com/coconutbattery/

Can't switch the time machine off!

Hi everyone,
At the advice of a friend I've turned my external hard drive into the time machine, but I don't want to do this, I just want it as an external plae where I can store music. I tried to switch it off by going to timemachine and then moved the switch to off, but for some reason everytime I plug my external hard drive in, it keeps showing up as the time machine. Does anyone know why?

Use Disk utility to erase the drive. When it remounts you will get a dialogue box asking if you want to use the drive as a TM backup. Simply decline.

How can we enable the trace at schema / user level

Hi ,
I knew how to enable the trace at session level and system level.
How can we enable trace at schema / user level.
Thanks
Naveen

I still don't understand.
As far as I know, 'trace' means 'to emit information about a subset of the steps being taken through code, generally to profile timing or identify code paths'.
As far as I know, a user and a schema are passive. There is absolutely no code 'running' against a user or a schema. I have no idea what could be 'traced' for a user or schema that is not already available in the data dictionary.
Further, a schema is nothing other than a named set of database objects. The name happens to be tied to a specific userid. So a schema could be considered a special kind of userid - although that is technically incorrect.
A session, on the other hand, is active. There is code running, there is memory assigned. It happens to link to the connection established by a user, using a specific userid.
I think you have told us you know how to turn on tracing for a session.
Why can you not turn on the traciong for all the sessions for a userid?

Fast User Switching Mac OS X 10.5.8

I just updated my iMac-G5 to OS X 10.5.8 and have noticed that when I use fast user switching, the "rotating cube" becomes stuck between accounts. The desktop does eventually go to the correct account, it's just not as "cool" as it was. Anyone else have this problem? Or is it time to retire the iMac G5?
Thanks

Thanks for the reply. I attempted to set up some new user accounts, and now thing are even worse. Before I set up the new user accounts, I deleted some old accounts I no longer needed. I neglected to log out of my other account before trying to switch between the two new accounts. When I attempted to switch to the new user account, the rotating cube got stuck. The new account desktop did show up, but without a menu bar, only the dock, and the icons for my two hard drives. I couldn't switch back to my main account and had to reboot by holding in the power button. Once I had rebooted I attempted to log off of my main account. No login window appeared, only the OS X desktop screen. Again I was forced to reboot by holding down the power button. Once back to my desktop, I checked and repaired permissions. I deleted the two new user accounts, and now when I attempt to switch to the remaining account I have, again, the rotating cube gets stuck and when the new desktop appears for the account, there is no menu bar, only the dock the HD icons. Programs on the dock don't launch either. The dock icons bounce, but that's it. I'm afraid I've done something seriously wrong. Any advice on what might be causing this bizarre behavior?
Thanks!

Crashing with Skitch, Snapz Pro, Fast User Switching - graphics card issue?

Noticed this issue when I switched back to a G5 from a Mac Pro.
Clean install of the OS and apps but Skitch locked the machine when accessing prefs etc. in the app. Then discovered Snapz Pro locked the machine when attempting to screen grab. Now, after creating a new user account and activating Fast User Switching the machine locks when switching to the new user.
Could this be an Open GL or Quartz Extreme issue? Ran Xbench and everything went fine. Normal day to day use of the machine is sound.
System Profiler tells me this about the graphics card:
*ATI Radeon X800 XT:*
Chipset Model: ATY,R420
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x4a48
Revision ID: 0x0000
ROM Revision: 113-A35801-109
I just flashed the ROM to 109 (from 108) today, but still have the issue.
Thoughts?

Malcom,
If I turn it off, then I lose the ability to jump between users without having to kill everything I'm doing. Yes, that does solve the problem, but only because it removes the cause of the problem. I'm trying to find a solution to the issue.
-Steve

Video freeze with Fast User Switching

I can't seem to find anything on this specific topic in the forums, but it's plagued me pretty much since I got the i7 iMac a year ago. The problem is this: when I have more than one account logged in via Fast User Switching, the video will freeze on me. Details:
* by video I mean not the display as a whole, but any video content that is playing -- YouTube, iChat video, etc.
* only the video freezes. Audio keeps playing.
* if I close the other user account, video will resume its normal functioning.
* if I constantly move the window in which the video is playing, it will keep playing.
* if I switch away from the window and return, the video will play again for a brief second.
Those last 2 I find especially puzzling, and they lead me to believe that somehow the computer or the video card somehow is "forgetting" that it needs to redraw the video.
I brought this issue up to a very friendly and helpful Apple rep who suggested zapping the PRAM, which did help for a couple of days but even a restart will do the trick for a while.
Anybody else seen this issue? Any solutions?

Same here. Not specific to 10.7.x, had it in 10.5 and 10.6 as well. The problem is made worse when also using Screen Sharing. All video is stalled (audio plays on). Sometimes the video continues when the mouse is moved. The video also continues when the system volume is changed using the keyboard.
And with all video I mean really all video. Even transitions in the login screen pause until I press the volume keys.
Usually there is no problem with one specific user, and the stalls can usually be fixed by logging that user out, as if that user somehow "owns" the video of the Mac.
Very annoying, and I do hope someone has a solution.
Any specific stuff the other me too's here have installed? I've got Flash Player, Click2Flash, Perian, SizzlingKeys, Flip4Mac for instance.

Which authorizations for solman user in monitored system?

We need to know what auths/profiles/roles are reqd in the active client of the ECC system for the solman user so that EWA, Sys Moni and Central System Admin can be done.
I know one:
1. Custom Role u201CZ_SAP_RFC_SM_CONFIGu201D (with authorizations S_RFC and S_RFCACL)
Can someone please list the roles/profiles or a link where I can get this?
Thanks
Prasad

Hi
Check the [security guide|https://websmp201.sap-ag.de/~sapidb/011000358700000370562009E.PDF] in page number 85 to 87.
Hope this helps you
regards
Naveen kumar

Any simple way to get the trace file

One user want the trace file i went to bdump dir.
any way to fine that trace file from there.

Re: dbms_session and sql_trace
ALTER SESSION SET TRACEFILE_IDENTIFIER= will help you identify the file name.
Search is a wonderful help in this forum.

Network drive and fast user switching OS 10.7

I have a shared network drive that I want all accounts on my Mac to be able to access. On my Mac I have a single admin account and several non-admin accounts. The problem is that once one account mounts the network drive when another user logs in (using fast user switching) the drive shows as being inaccessible (a folder icon with a "do not enter" icon on it) and must be unmounted and remounted. This is an issue because unmounting requires the admin password which is not known to all users.
Is there a way that I can make the mount available to all users on the machine without needing to remount for each user? Or is there a way that I can unmount without requiring the admin account?
Thanks

System Preferences -> Users & Groups, click Login Options, you'll see it then. You'll need to unlock that preference pane with the lock in the lower left corner of the window to change that setting.

Fast User Switching Freeze

My wife's Macbook has been having a problem for the past couple of months. If she attempts to switch users (away from my son's account) using the fast user switching, the screen goes blue and just seems to hang there. She usually just forces it to shutdown and restart. She has noticed that she can switch to the login window, then select her account, and all works well.
Has anyone else experienced this? Any fixes out there? Google has not revealed anything on this.

Have same problem now with my iMac -- when I had it in the past, it was due to account privilege issues -- if one of the accounts did not have admin privileges, but another did, system was prone to freezing. I suspect permission problems. I'm not sure this is the current problem on my machine; problem does not occur if I log out of one account before switching back to the first account.
Try making all accounts admin & see what happens...

Disable Thinkpad 10 touch case from switching the screen on automatically

My new thinkpad 10 touch case is pretty sensitive to movement and it seems like my screen is turning on a lot while in my bag. And it drains the battery very fast. Is there a way to turn off the cover from switching the screen on/off? I'd rather just use the power button.
Thanks for all the help.
Solved!
Go to Solution.

BIOS 1.23 (32-bit) and 1.63 (64-bit) and up have a new option to disable wake when opening the case.
Even without the BIOS update, you can program the system to sleep or not sleep when *closing* by using the "lid" options in the power control panel.

Trying to switch the "Main" linked account

I have two addresses/accounts linked to my online profile, but the "Main" account (the first one I see when I log in) is my old address. I'd like to designate my new address as the "Main" account, and unlink/delete the old account. Is this possible? I couldn't find any help content on switching "Main". Note: I DON'T want to manage primary/secondary users on the account, I want to manage the linked accounts themselves. Thanks!

It sounds as if you want to transfer account ownership.
If this is the case you can make the new address the primary user account.
Follow the directions here HOW TO CHANGE ACCOUNT OWNERSHIP (clickable link)
The only way to unlink an account is to delete it IF the account is a secondary account.
If you want to delete the former primary user account, you will have to sign out of My Account and sign in as the NEW primary user accout holder.
The function of the PRIMARY account is to manage secondary accounts. The only way to NOT manage them is don't click on the tab for the account.

SolMan-User switch the Trace on/off in managed System

Similar Messages

Maybe you are looking for