Solo Piano/multiple takes question

I have been using a single project to record myself playing various tunes. I like to keep a bunch in one project as a matter of convenience, so as to not interrupt the creative flow. When I am ready to apply verb, EQ etc., what is the best approach to handling each tune separately, specifically:
1. Do I need to export each tune to it's own project before mixing?
2. If not, how do I "export" each tune/track as a finished mix, ultimately as an MP3 or AAC file for the web?
thank you
Peter

there are a couple things you can do. I like to separate each into it's own project, but you don't have to. Is each song a single continuous region? if so, you can just select that region and using bounce, just that region will be bounced down. if each song has multiple regions, you can pack them into a folder and then bounce with that folder selected to bounce down the song. whatever works best for the way you like to work

Similar Messages

I have question about take folders. After recording multiple takes on a project of say 16 tracks. Is there a way to switch between takes globally? Instead of one at a time which is tedious. I am talking about a situation where all tracks are being

Oops , my body got put into the title sorry. Anyway so when doing live recording and multiple takes of all tracks is there a way to switch between takes globally instead of switching them one by one?

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Which file is Logic playing with multiple takes on one track?

This should be an easy one, but I don't even know how to look it up here or in the Logic manual.
When you record multiple takes on one audio track, and in the arrange window they are stacked up one on top of the other, which one is Logic playing when you've muted nothing? When each track is the same performance it's impossible to tell because the waveforms stop and start at the same time, and the meters in the arrange window show all takes playing. I'm hearing only one take at a time though and through soloing, muting, and splitting into regions I can usually figure out which one is coming through but there's got to be an easier way to tell.
Related question, is there anyway to force Logic to play one take all the time except for the muted regions when you want other takes to be playing? Or do I have to keep muting the regions I don't want to hear?
Any help is greatly appreciated.
-Marek
Powermac G5 Mac OS X (10.4.5)

The one whose event is latest in the event list - it will enter when the region begins. Therefore, the anchor and region adjustments in the sample editor can affect who plays when.
Master the mute tool and mute tracks - also assign a KC to mute regions and tracks. It's actually really snappy to make a comp and fly through regons and folders when you have done it for a while.
J

Logic Pro 9 why am I hearing the last take when I'm in cycle mode and trying to produce multiple takes?

Hi all,
More questions about recording in Logic Pro 9. Just wondered...is it called cycle mode when I have an area I want to record multiple takes at? And, why am I hearing the last take when it is cycling at take 2, 3 etc.? Please reply. Thank you.
David

Have a look here:
http://youtu.be/e5PbrWJrq4k
......and here:
http://youtu.be/M_SUrJRuENw
Have a nice day!

Best app to import and study multiple choice questions.

Hi,
I'm searching for an app to help study for an exam.
Part of the studying strategy is to study by the previous exams questions. I have those (a lot of them) in text format.
The app would need to have:
- Support for multiple-choice questions;
- Easy, fast and automated way of importing the questions;
Would be nice to have:
- Ability to include a rich-text comment along with the right/wrong answer;
- Support for tagging each questions.
I've used the search function and found this:http://forums.macrumors.com/showthread.php?t=1041085 but it's been a while since then.
thanks in advance

Hi Konrad;
What approach would you recommend to import and export EBS data? Open Interfaces, PL/SQL, web services or anything else?For your question please check below notes:
Export/import process for R12 using 11gR1 [ID 741818.1]
Export/Import Process for Oracle E-Business Suite Release 12 using 10gR2 [ID 454616.1]
General Notes For E-Business Suite Release 12 [ID 986673.1]
Please also check below thread:
how to export data from ebs
how to export data from ebs??
Also check below search which could help you about your issue:
http://forums.oracle.com/forums/search.jspa?threadID=&q=import+export+&objID=c3&dateRange=all&userID=&numResults=15
http://forums.oracle.com/forums/search.jspa?threadID=&q=export+data&objID=f475&dateRange=all&userID=&numResults=15&rankBy=10001
Hope it helps
Regard
Helios

How to get multiple takes on one track?

Using the latest version of GarageBand, how can I get multiple takes of a vocal, for example, on one track and then select the best one?

See this support article:
Record multiple takes: http://help.apple.com/garageband/index.html#gbnda1184253

Multiple takes on the same track, fading from one take to another

Isn't there a way to record multiple takes on the same track and fade the takes together? In an old version of Garage Band, you used to be able to put two takes one on top of the other in the same track and fade them together. Now, the track just cuts and there's no fading to the next one. It's so cheesy this way; all live instruments need two tracks, one for mess-ups. I called up Apple Care but the guy couldn't find a solution. If this is the way it is now, it's very cheap. I mainly bought the Mac because of Garage Band, the Garage Band of old; has it been dumbed down now so that musicians are forced to spend even more money to upgrade to the next level program? I wouldn't have bought the Mac but instead stuck with Mixcraft on PC, which has ease of use and cost only $80. Please say there is a way to fade from one take to the next on the same track without cutting off one take abruptly. Otherwise I have been duped by Apple.

alexafrompassaic wrote:
I believe it was Garage Band '08 that I used with crossfade.
Sorrry dude, didn't happen.
I'm guessing you used Apple Soundtrack - sounds a lot like what you're describing.
Garageband, incidentally, has only added features version to version.
alexafrompassaic wrote:
do you know if Apple would take back my computer?
If you explain to them that you expected software you once used on another computer to be included on this one, how could they not?

Multiple Choice Question Issues

I am embedding a quiz within my presentation with individual
question slides interspersed throughout the presentation. These
questions are pulled from a couple of different question pools. I
want to use a multiple choice question that branches to different
parts of the presentation depending on the correct or incorrect
answer. If the user answers the question incorrectly, I send them
to the next slide which has two click boxes. On this slide, they
can either click one box to move back in the presentation and
review the material or click another box to move them forward to
another multiple choice question. If they go back and review the
information, they would eventually return to the same multiple
choice question to try it again. (This is the desired navigation,
anyway.)
What actually happens is that when the user goes back to
review the information and then finally returns to the question,
the question has not been reset and still shows the incorrect
answer marked with no way to clear it.
I have used this same navigation on a drag-and-drop type
question and it works fine. All the settings for the
multiple-choice questions are set the same as in the drag-and-drop
question.
Any help in making this work correctly would be greatly
appreciated.

I can't see where that error might arise except possibly for a case where an AS2 radio is used since it appears they don't have a group property, but an AS3 radio button does. Check to be sure that your Flash Publish Settings are set to use AS3. AS3 errors normally have error numbers which also makes the error you quoted ring of an AS2 scenario.
Here's a link to the file I made based on your code that works fine and doesn't display the errors you mention. It is a CS3 file.
http://www.nedwebs.com/Flash/AS3_Radios.fla

Multiple choice question in intractive pdf?

Hi,
I have a question about Multiple option question. How to create Multiple option single answer question with explanation popup in interactive PDF. Please guide me.
Regards
Anil

Yes, this worked fine.
I just had to place the animal to the left of the table and just reduce it slightly in size. It worked fine.
Thanks!

Select more than one answer on a multiple choice question

How do you select more than one answer on a multiple choice question on an employment application on the internet?

marmaldonado,
Is this a PDF form? Or a web form?
Clinton

Some Multiple Takes are now Empty

I did 14 multiple takes in a 8 measure break area. I copied the track so I could copy those takes and used the best beginning, middle and end from 3 of them, splitting the break accordingly. Everything played perfect. Then I moved all the snippets to the one mail track and had 3 peices from takes 2, 6, and 9. When I played the entire song, only take 2 played and the the sound went off. The takes are still there, available 1-10 in each section, but only 1 and 2 have audio. This feels really "buggy" to me. nothing was deleted and because they are still on the list, the audio should be there. Could not find anything helpful in the Show Package Contents of the songs. I thought maybe all the takes would be in there and I could import. HUGE thanks for any help... I could find nothing on the forum or Google about this possibly bug.

Restated this problem in "Multi-Take Cycling Audio Missing Revisited..." post. Please respond there!

Editing multiple takes

Does anyone know of a tutorial on working with multiple takes? I can't seem to find anything in the manual or here in the discussion group.
I have several takes that I would like to pick and choose from, but I can only get one of them to play at a time. I thought this was a simple process with the marquee tool. But am having no luck.
Any guidance would be greatly appreciated.
Thanks.

Hi,
I guess you mean Help > Logic Express 8 User Manual, page 391 (Creating Comps).
Here you'll find the explanantion of how you can take the best parts out of multiple takes.
Note that this only works on takes you recorded on one track. So, if you recorded your different takes on different tracks, they won't appear in this way, and you'll need to things the old fashioned way.
Regards,
Jaap

Multiple choise question, limit number of options

Hi,
we have a multiple choise question with 10 possible answers. 5 is correct, and 5 is not. How can I limit so the user only can check 5 answers? Right now, the user can check all 10 and get full score.
Im using Captivate 8.
Kind regards,
Pontus

Hi,
I am relatively new to Captivate (currently using version 7) and have also been looking at this. I have a programming background so have been mucking around with trying to create this using advanced actions so would appreciate some advice if I've gone about it the right way or not.
I have created 4 answers with clickable smart shapes to show whether they are selected/deselected. I have variables to store the number of allowed answers, number of selected answers and question score (which update with the selecting/deselecting of each answer). To keep things simple, I am assigning 1 point for every correct answer selected and only have 2 correct answers. There are 3 separate 'submit' buttons (one worth 0 points and not included in quiz, one worth 1 point included in quiz and one with 2 points included in quiz). Depending on the answers chosen, the relevant submit button will be made visible (and the others hidden).
What I'm having trouble with is that the points from the submit buttons that are included in the quiz are all contributing to the total points available. I want the question to only be worth 2 points but because I have two buttons (one worth 1 and one worth 2) that means the total points available for the quiz is 3.
Any help on where to go from here much appreciated.
Thanks,
Chris.

Creating Multiple Response Questions.....

Hi.
I'm looking at updating a load of Java Applets here at work
accross to Flash.
I'm not looking at using the quiz templates but wondered if
anyone can help me out?
Basically I need to create a multiple response question using
an xml file and was wondering on the best way to achieve this?
Any help would be much appreciated.

I need to use an xml file for the questions and answers.
And there are more than 1 correct answer for the questions.
I'm pretty new to actionscript so a few pointers in the right
direction would be a great help to me.
Should I be using the xml component? The dataset components?
Check box components for the questions?
How do I get the xml to interact with the flash.... sorry for
all the questions.

Switching between multiple takes?

Hi,
I am having a problem. I am recording multiple passes of drum tracks on top of each other. Is there any way to switch between them, so I can compare? I cannot figure this out. Any help? Thanks.

I'll second mr loops suggestion of using folders. It's absolutely the best way to take advantage of the multiple tracks in Logic, while maintaining some form of organization.
Especially when a typical drum tracking session can range from 8 to as many as 16 (or God forbid more) tracks, per take.
I like to throw take one into a folder, name it take 1, and even color code the folder. So now, all the drum tracks within that folder have taken on that color.
Record take 2, pack those tracks into a folder, name it "Take 2", and color that folder something different.
After you have recorded all your takes (for sanity's sake, let's say there's 4 takes). You can then make cuts on all those folders, over the various sections of the song, and place all the different sections of the different takes into a "Master Folder".
When you find the various sections from the various takes that you want to use, simply merge that master folder. Then, when you double click into that folder, you'll see all the various colored tracks, from the multiple takes, that were used to make the final comp.
From within this folder, you can add your cross fades, and fine tune your edit points.
Lastly, when your satisfied with it all, you can utilize the "Export All Tracks as Audio Files" function. Since you're doing this from within the folder, only those tracks will be exported.
You then have continuous audio files to bring back into the song, if you prefer to work that way. You can always keep the original folder takes around, should you later decide to re-address a section.

Solo Piano/multiple takes question

Similar Messages

Maybe you are looking for