Solstice ppp 3.0.1 + what r patches?

Hi there,
I ve installed SolsticePPP3.0.1 completely on Sol8/Intel and tried to set up ISP. However, after I turn on PPPTool icon, it has connected to my ISP Server but it still not connect to browser Netscape4.7//
Sun Service Support tell me that I should install more SUNLink patches. Is that right? Please help me to set up a correct Internet connection using solstice ppp3.0.1
p/s: I ve install and setup patches attached with Solsticeppp3.0.1
thanks
dphan

You have to remove ALL ppp packages before installing Solstice PPP 3.0.1.
No additional patches are needed. pdf document 805-4018 may be useful.
This ppp 301 is very easy to install ! You might need to change some lines in
/etc/opt/SUNWconn/ppp/script. Good luck !

Similar Messages

  • Solstice PPP 3.0.1 installation

    Hello,
    just downloaded PPP.shar file and do not have inormation for installation.
    Q1 Please be so kind and help - how do I install?
    Q2 Can it be used on Solaris 8 and 9 as well?
    Thank you very much and best regards, Harald - Germany, D�sseldorf

    You have to remove ALL ppp packages before installing Solstice PPP 3.0.1.
    No additional patches are needed. pdf document 805-4018 may be useful.
    This ppp 301 is very easy to install ! You might need to change some lines in
    /etc/opt/SUNWconn/ppp/script. Good luck !

  • What is patches in oracle ?

    Hai to all
    what is patches in Oracle ?
    suppose my siebel version is 8.1 something they mentioning in forums or somewhere else 8.1.1.1 or 8.2.1
    what it means ... if sample version of siebel or any software can we install on top of base installation 8.1 ? how can we put for sample practice and also
    tell me
    if i downloading siebel which one i need to download from oracle edelivery site... ? and also .. tell me
    all the file formats are downloaded look like .jar files how can i convert into exe files ?
    please guide me and mail to me
    [email protected]

    This has been discussed previously - use the search feature
    https://forums.oracle.com/forums/search.jspa?threadID=&q=CPU+and+PSU&objID=c18&dateRange=all&userID=srini.chavali%40cummins.com&numResults=15
    to find threads like these
    Re: CPU / PSU / OneOff -- Doubt
    Re: Difference b/w CPU  and PSU
    HTH
    Srini

  • How to check what oracle patches are installed

    Hello,
    I need to now what oracle patches are installed on different databases, how can achieve this?
    Regards.

    Yep:
    select ACTION_TIME,ACTION, VERSION,COMMENTS from sys.registry$history;
    ACTION_TIME ACTION VERSION COMMENTS
    25-JAN-09 07.06.05.665358 PM UPGRADE 10.2.0.4.0 Upgraded from 10.2.0.1.0
    20-MAY-09 12.23.00.924500 AM APPLY 10.2.0.4 CPUJan2009
    20-MAY-09 12.32.48.709814 AM CPU view recompilation
    Regards.
    Edited by: user6046340 on Jun 25, 2009 3:57 PM

  • What are Patches?

    Hello Masters,
    What are Patches? Are they updates to the version or something else? Please educate me.
    I am bound to give points
    Thanks and Best wishes,
    I-BI

    Hi,
    patches generllay fixes any know bugs in ur system. Please dont come to a conclusion with my explanation.. please wait for some one to shoot u with more ideras on it.
    Arun

  • What is Patch Application Assistant by entering "admsi.pl" & how to run it?

    Hi
    I am trying to apply patch 6510214 on Oracle Apps R12.0 (Base Release), inorder later to upgrade to R12.0.4.
    In Readme Document for patch 6510214, it is written as 'Run the Patch Application Assistant by entering "admsi.pl". How do i run this and also needs steps to upgrade to R 12.0.4.
    Please help me.
    Thanks
    Ateeq

    Hi
    Regarding this patch_top directory. We have single node installation and path is /vision/patch. How do i check whether it is a correct patch_top directory or not?
    When applying 'u driver' patch, in what locations exactly i have to copy downloaded,unzip file in order to apply both on AS and DB server.
    Like the steps for applying patch in R11.5.9,are
    1     Copy your Patch Zip file to patches folder
    2     Unzip your Patches
    3     Stop All Services on AS
    4     Stop Concurrent Manager on DB Server
    5     Source the Environment (AS)
    6     Locate Patch Directory
    7     Enable Maintenance Mode using adadmin command
    8     Apply Patch using adpatch utility
    9     Disable Maintenance Mode using adadmin command
    10     Depending on Driver type (Repeat steps from 2 to 9)
    11     Verify changes as mention in README file
    12     Start Concurrent Manager on DB Server
    13     Start All Services on AS
    Is it the same sequence in R12.0.0 or different? Please put some light on this issue.
    Thanks
    Ateeq

  • What does "patch package could not be opened" for 8.3 Adobe Reader

    Adobe reader won't open pdf. Tried to uninstall and reinstall Adobe Reader 8 but now get this message when it tries to install.  What do I need to do to correct? Can't uninstall(delete) my 8.3 from add/delete programs area. Looks like something is corrupted or missing, but stumped. Help!

    Try the Adobe Acrobat and Reader cleaner tool: http://labs.adobe.com/downloads/acrobatcleaner.html

  • How to Identify what Portal Patches Have Been Applied?

    hi All
    I need to identify which patches have been installed in my OAS Installation. I have OAS 9.0.4 installation on HP/UX, and i need to import some page groups from a production environment but i´am reading note 263995.1 for import/export issues and i need to find out if patch 3277149 it´s already applied in my testing environment.
    Where can i find this patch? is there any table where i can query for patches installed?
    regards

    I believe the table is wwutl_patch$.
    Please check metalink note 279771.1.
    Regards

  • What is the use of security pathces or cpu patches?

    Hi
    All,
    What is the use of security pathces or cpu patches?
    Thanks,
    Vishal

    Basically, Security patches keep your system secure from known expoits which could compromise your database should someone try to hack it. You don't have to put these patches on but you do need to assess the risk of not patching by checking what the security patch patches and deciding whether you are exposed or not. If you are unsure, then I'd recommend you patch.
    CPU patches are Critical Patch Updates that are issued quarterly. These are a mix of security patches and bug fixes. The same applies - you don't have to patch but it is worth taking a look at what is patch and making some assessment of how exposed you might be if you don't.
    Be warned, though. If you hit a problem and need Oracle's help, then Oracle support may insist that you are patched to the latest patchsets before they will assit with your issue (assuming the patch doesn't fix the issue).
    One word of advice would be that if you do decide to patch, patch your test environment first and make sure everything works normally afterwards, just in case the patch introduces a new issue for your environment - this is rare but I have seen it happen.
    Cheers,
    R

  • What is the latest HTMLDB patch

    What HTMLDB patch should I apply to a 10.1.0.4 RDBMS to bring HTMLDB up to the latest patched level?
    Thanks,
    Ralph.

    Ralph,
    The version of HTML DB is independent of the specific database release. HTML DB is supported in 9.2.0.3 and higher.
    The latest patch set is HTML DB 1.6.1.00.02. This can only be applied to a HTML DB 1.6 instance.
    Joel

  • ITunes 7.3.1 may include iPhone patches

    I tried to take my iPhone back today, primarily because the software seems not yet polished enough for me (I was having mail problems with iPhone not closing the connection to my POP server between mail updates).
    I was told that iTunes 7.3.1 includes several iPhone related patches, which were not being publicized, and specifically that they were not mentioned on the web site.
    This was just enough to get me to keep the phone and try it again after 7.3.1.
    Perhaps this was just a sales pitch, but my gut told me it was (1) the truth (at least as the speaker knew it) and (2) from a likely reliable source. In which case, does anyone know what these patches might be?

    Well, could be true, but not necessarily true. I worked on the Mach kernel before it became part of the NeXT OS before it became part of OS X. I've hand decompiled linker binaries to patch in new machine code to add features to software the developers didn't want people touching. Doesn't mean I'm not gullible or a fool, but on the other hand Apple has been known to take steps to make it hard and time consuming to figure out things they don't want people to figure out, and they don't always publicly announce the truth, the whole truth, and nothing but the truth. So, if someone snoops the USB bus and says they don't seem to be seeing anything that looks like code, I'd put some weight in that. Otherwise, with this new piece of hardware and new protocols, I'd say there is room for doubt about what Apple is doing.
    This Apple employee told me there were six specific 7.3.1 patches to iPhone that were described in general terms in an internal memo today, they were to be applied to store demo phones, none seemed to be email related, so I should not expect my problem to be fixed, but perhaps I'd like to see for myself. So... I'm simply asking if anyone has heard a similar story.
    (I've gotten the message that many people are certain there are no iPhone patches in 7.3.1. If someone wants to post that again, feel free, but it doesn't address my actual question - whether anyone has heard the opposite from possibly believable sources. If in 48 hours no one reports such info, I'll take that as evidence against what I was told.)

  • Patch 7690975 for EBS 11i

    Hi hussein,
    I am applying patch 7690975 on our 11i instance, but I encountered "worker failed" error. The patch process is telling me to resolve it using "adctrl"
    "tell the worker to restart a failed job", but still the error persist and it is stocked up on the same failed process :(
    Enter your choice [1] : 1
            Control
    Worker  Code      Context                 Filename              Status
         1  Run       AutoPatch R115                                Wait
         2  Run       AutoPatch R115                                Wait
         3  Run       AutoPatch R115          apomg.ldt             FAILED
         4  Run       AutoPatch R115                                Wait
         5  Run       AutoPatch R115                                Wait
         6  Run       AutoPatch R115                                Wait
         7  Run       AutoPatch R115                                Wait
         8  Run       AutoPatch R115                                Wait
    Review the messages above, then press [Return] to continue.
                        AD Controller Menu
         1.    Show worker status
         2.    Tell worker to restart a failed job
         3.    Tell worker to quit
         4.    Tell manager that a worker failed its job
         5.    Tell manager that a worker acknowledges quit
         6.    Restart a worker on the current machine
         7.    ExitI tried #2, #3, #4, #5, but it is #2 only that is being accepted. But still the error persist or remains there.
    What other things should I check if there are dependencies against the error. I am thinking there might me invalid database objects that needs
    to be recompiled first.
    Please help....
    Thanks a lot
    Ms K

    Hi xyes;
    I guess I need to apply the patch to make my afmdmsg.lct be at version 115.29 from 115.28.How you decide it? I guess u checked worker log but for this decision u refer which note(what is patch number which u need to apply)
    But how do I bypass the current hanging patch 7690975 which got the error? I know everytime I run the patch I will check the previous erroneous patch.
    Sould I continue = "NO"?
    If you are sure about upper patch. You should stop patch 7690975 and then apply your patch and then repatch 7690975
    Regards
    Helios

  • Robohelp 9 with patch - Not working with IE10

    Hi,
    We have a problem with webhelp generated from RoboHelp 9 when viewing with Internet Explorer 10. We can't open a topic on the left or open a search result, until we either :
    A) Resize the window
    B) Resize the splitter between contents and the content pane on the right
    C) Open the dev tools via F12
    We have installed the patch provided by adobe for existing webhelp generated by RH9 at the following address :
    http://abak09.abaksoftware.com/AbakWeb7700/Extras/Help/EN/
    I have also tried to install RH10 and generate the project again, but the same issue occurs.
    I don't know what else to look for, the problems are what the patch was released for, but it is not working in our case.

    We are reproducing with Windows 8 Pro 64bit, with Internet Explorer 10 (Update version 10.0.3).
    I see on your website the snippet "Topics not opening in IE10.". On our web server, we add the IE8 compatibility tag for our web application to work correctly. I have created a new site without this tag and the fix is working.
    Thanks a lot for your help

  • Applying patches to PI 7.0 SP6

    Hi Experts
    I am totally new to this XI technical side so please help me out in a step by step way.
    Actually we are trying to install XI 7.0 and the initial installation like from the master installation DVD and the exports and all are complete.
    So the system is basically on PI 7.0 with basic SP6 and nothing like SAP basis content 7.0, PI AFC Core, PI adapter, PI adapter Framework etc whatever is needed has not been applied yet
    Please guide me how and what all patches and content like AFC core etc is to be aplied so that the PI system is ready to work.
    We have done the post installation configuration through template wizard .
    Any step by step help would be rewarded.
    Thanks

    Don't know if this helps but if I understood you correctly you can cd to the location where the patch was downloaded and do the following:
    cd patch_directory/
    opatch napply -id (ID_LIST) -skip_subset -skip_duplicate
    e.g.
    opatch napply -id 7155248,7155251,7155254,7375613,7609058,8309623,etc. -skip_subset -skip_duplicate
    If there are that many of them you can do an ls and use a text editor to edit the ID_LIST.

  • Problem with national language after patching

    I have BEx Analyser based on Excel 2007. After patching with 801 (SAP NetWeaver 7.0 Support Package BI Frontend Add-on 7.x SP's for SAP GUI 7.10) got problem with national symbols input.
    Please any ideas...
    Thanks,
    Olga

    It's best to post this in a SQL Server forum. ConfigMgr is simply a delivery mechanism for the patch and really has nothing to do with what the patch actually does.
    Jason | http://blog.configmgrftw.com | @jasonsandys

Maybe you are looking for

  • In ios 7.1 can i set my contact pictures to full screen?

    i have this beautifully huge screen and this tiny picture.. i dont want to revert back to ios 7, but the tiny picture is really a deal breaker for me. i dont understand why this was changed. i really hope this is changable and someone can help me cha

  • Saving issues: "The file may be read-only" error message

    I do a lot of scanning to pdf and will often have to add a newly scanned page to an existing archived pdf then resave it. I have a very consistent workflow and use two screens. The folders that contain the archived files are always on my second scree

  • Asset Register with different Fiscal Year Variant

    Ministry Of Commerce requires Power Line Carrier Companies to maintain an additional fixed asset register. This register needs to have Fiscal Year - April to March Revaluation of Assets on 1 April every year based on indice provided Ministry. Deperic

  • Exiting from a program

    I've created an exit button, but it's not working. Any suggestions? I've tried Java Script and No Action.

  • How to add DRM to iTunes Files?

    So I bought this album from Target and I imported the CD tracks into iTunes Windows App and I pretty much follow the exact "formatting" (Artwork, NO. order of the Tracks ect.) from iTunes; but is there any FREE software or any way to ADD DRM to impor