Solud Out, Sold Out,Sold Out.

Ok so my monitor died on me last monday. I came to BB since I had a 4 yr warranty from Geek Squad, and they confirmed taht it was dead. Since that HannSpree 25" model was discontinued I was offered an exchange. Now, during summer I've decided to make a massive upgrade of my PC, to be able to play games with Nvidia 3d vision tech.
Here's the specs :
Phenom II x6 1090t @ 4.ghz
MSI NF980-G65 mobo
8 gb ddr3 1600 8-8-8-20 timings ( I could push it more, but there wont be even 1 fps difference with say 7-7-7-18 timings)
PNY GTX 480
Zotac GTX 480 AMP! edition.
thermalright venomous x CPU cooler
HAF X case.
So you see, I was planning to get a 3d monitor from Asus or Acer sometime this october/november. But since my monitor died on me I've seen this as an appartunity to go ahead and get a 3d moni. right away. Well Asus was sold out online and they didn't have it anywhere else, so I've ended up getting Acer...and it came on thursday defective ( my luck is with me right?). So once again -> went to Geek Squad, they've checked it out, it was defective, went to customer support, and w00t Acer is all sold out anywhere at least that's what BB representative told me, and I couldnt get it anymore >_>. And Asus is sold out and even the sub-par Sumsung is Sold Out.
Question is : when can I expect them to re-appear for sale ? Every other store ( aka Newegg, Amazon,Nix,CompUsa) still have them, so it's not like Acer or Asus stopped making them at all.
Here are the models :
Asus - 23" 3D High-Definition LCD Monitor - Black
Model: VG236 | SKU: 9981224
or
Acer - 23.6" 3D Widescreen Flat-Panel TFT-LCD Monitor
Model: GD235HZ | SKU: 9907281

Asus often does product line refreshes around the October time frame.
(Although maybe I'm thinking that just because of Windows 7's impace on product line refreshes last year.)
It was kind of frustrating last year - a lot of manufacturers started ramping down production of existing lines in August/September, but the replacement wouldn't become available until mid-October.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Similar Messages

GX740 - Anyone get two TRUE separate audio streams out Headphones and LINE OUT?

Hoping for an update on this. I asked MSI via their support section and wow... what a FAIL that was:
Quote
Do you have new specific drivers that allow TRUE 4 channel output? 2 out the headphones and 2 separate out the LINE OUT as implied by the design? I've tried everything and it doesn't work.
I've tried ASIO4YOU drivers - doesn't work.
I've tried every RealTek driver out there - nothing.
Yes, I've set the RealTek driver to do multiple out but it sends the audio out the HDMI port, NOT THE LINE!
I know this can be done cause you can set the REALTEK for 7.1 and you get separate streams out the headphones and line-out ports!
Please - you've sold a laptop with "Headphone Out" and "Line Out" yet it fails to actually do that - NEW DRIVERS PLEASE?
Posted: Feb 11, 2011 by Peter Stone
All Posts
Dear Customer,
Please go to msi global website to download the audio driver,then install it.
audio driver:
http://www.msi.com/service/download/nbdriver-15227.html
Needless to say, that did nothing. In fact, I can't understand how I could of received such an answer given it made no sense what-so-ever. Download the driver that came with it? One that's now almost a year old?
Regardless... I've tried that one. I've tried the latest RealTek drivers. I've tried a multitude of ASIO drivers. NOTHING WORKS. Yes, I've set the RealTek to send TWO SEPARATE STREAMS. That does NOTHING. The only thing I've been able to ascertain is that you can send one stream out the headphone/line out (same thing) AND one out the HD port which is useless.
Here's the pain in the ass: If you go to the RealTek setup and change it to 7.1 and hit TEST, you DO hear separate output out the HEADPHONE JACK and the THIRD Audio Out jack which is the side fills so I know this laptop CAN spit audio out two separate outputs sitting on the side of the computer.
Why do I want to do this:
Simple. I'm lugging around an external audio interface for DJing and it's a pain. I'd rather just tap the headphones out for, well, headphones and send the line out or that third audio output to the DJ mixer. Done! I've tried MIXMEISTER, VIRTUAL DJ, NOTHING WORKS! I can select various strangely named outputs insinuating speaker out, speaker out + 1, etc... but no... it doesn't work at all...
Sooooooooo... has ANYONE been able to get this to work? I'd love to know...

Yea Stu... been through this part... Playback devices show the typical:
1. Speakers (Realtek) -> Plays on ext. speakers but sounds like just treble. Headphone Out plays this stream.
2. RealTek HD Audio 2nd output -> Plays on ext. speakers but sounds like bass/mids. No treble. NO OUTPUT PLAYS THIS. Plug anything in and sound from the speakers just shuts off
3. Realtek HDMI Output (Not selectable)
4. Realtek Digital Output (Not selectable)
So yea, it seems right out of the box there is a problem with the sound on this unit. Choosing speakers sounds like crap (no mid/bass) and choosing HD Audio 2nd output sounds like crap (all mid/bass no treble).
There is no discrete dual audio out the jacks.
HOWEVER - Go choose 7.1 from the realtek setup and do a test. Well what do you know, DISCRETE 2ND AUDIO OUTPUT OUT THE HEADPHONE JACK AND THE 3RD OUTPUT JACK OF THE 4 IN A ROW. This PROVES you can have two discrete stereo audio streams coming out the output jacks. Just need someone to write the driver for it.
Here's the thing. This laptop HAS 4 1/8" JACKS. SEE:
Here's what the manual says about the output jacks:
Mic In:

Possible to use both optical out AND regular line out at the same time?

I currently have my computer speakers (logitech z560) hooked up to the mac pro via regular stereo jack in the back. I have an extra receiver that I would love to hook in to supply me with some needed sound for movie watching and what-not.. Is there a way to enable both line out - digital and line out at the same time?

You can set DVD Player's "Audio output" to "Digital Out" in its "Disc Setup" preference, while other applications use Line Out.
You could use a splitter on Line Out to feed your current speakers, and analog Line In on your receiver. When you want sound to both systems, set the receiver to Line In. When you want to watch DVDs, set it to Digital In. This will give you surround sound if the DVD has multichannel sound, and the receiver supports more than two channels.
If you really want the same output on the Mac Pro Line Out, and Digital Out, you can use the "Auxiliary Device Output" effect in Audio Hijack Pro
<http://www.rogueamoeba.com/audiohijackpro/>
It will not support more than two-channel audio.

Cant Figure out how to get out of App's like Twitter

I just got my new Q5 (Traded in Curve) \i figured out most of the phone but have not been able to figure out how to get out of App's like Twitter or any browser Apps once \i am in there. I used to have the nice little "back button" on the Curve but no more Back Button on this one Ive tried swipping every which way but loose with no luck. Even when I am in my photos, I can figure out how to go back to the main menu (other than to turn the phone off and turn it back on) Is there a Back button somewhere or is my phone just not working right. please help
Solved!
Go to Solution.

Hello tomanator
To close app, swipe up from the bottom of the screen, and tap X at bottom right of each app.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

No sound out of back line out MacPro Bootcamp 3.1 Windows 7 64bit

No sound out of back line out speakers.
MacPro Early 2008
Bootcamp 3.1
Windows 7 64bit
Realtek HD audio driver.
I have speakers plugged into the back line out.
They work in Mac 10.6.4 (as always) and in Parallels 5 Windows 7 using Bootcamp partition.
All other jacks work. In Realtek driver it shows nothing connected to that jack.
Anybody else have this issue?
Anybody else have solved this?

Anyone at all?
Even if you don't have the issue yet have a similar setup. Maybe I can figure out if there's a driver update I may need.
BTW I KNOW others have this as I've seen this mentioned on other forums. What I do NOT know is whether it's "everyone" or there's something about systems that don't have this issue, I need to follow.

"Edit in Soundbooth" is grayed out. Am I out of luck?

Is there any way at all for me to use Soundbooth to edit audio in Captivate 5? I purchased the CS4 suite with Soundbooth separately from Captivate 5 and the button in the audio edit window in Captivate to edit with Soundbooth is grayed out. Am I out of luck?

Hi there
When you right-click the audio clip in the library, isn' the generic "Edit with" an option as shown below?
Click image for larger view
You then browse to whatever editing application you like and edit.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Multiple Audio out: usb dac audio out and hdmi out

Good afternoon everyone, I have a 2010 mac mini with the following audio set up.
- A usb dac (xtreamer) connected to my stereo amplifier
- an Hdmi cable to the tv to get video and audio diretcly to the tv
Is it possibile by any chance to get simoultanesly audio output both from usb audio out and hdmi audio out???
In "midi preference panel" I tried to create a "virtual" sound card but i am not able to get sound simoultanesly. or via hdmi, or via usb.
this is quite disappointing because if I want to listen to music with the amplifier and then watching a simple video with mac mini and tv only I need to go back to the audio preferences and set up manually each time.
Is it possible to solve this issue???
Thanks a lot and gretings from Italy

I can select ATV audio out (Airplay setting) to either my Airport Express or my computer so it must be transmitting via airplay. Using a combination of Airserver, Airfoil and Airfoil Speakers I managed to get the ATV audio content on both my PC and my Airport Express at the same time but it cuts out the ATV audio.
My aim is to have a movie on ATV transmitting the Audio to ATV AND my stereo (which is hooked up to the Airport Express).
Cheers

HELP!! 2.1 update wiped out my in and out boxes in Outlook

I updated my itouch yesterday with 2.1 and it wiped out my in and out e-mail in Outlook. I'm running Windows Vista. If anyone has any advice I would appreciate it. My last .pst backup is too old to salvage the damage done with this update.

Are the other iPods that work iPod touches (or iPhones or iPads)? iOS devices like iPod touches use additional drives to those used by "dumb" iPods.
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How can i get out my headphone jack out of iphone 5c

how can i get out head phones jack out of my iphone 5c

You have to connect to a computer with iTunes following the instructions in http://support.apple.com/kb/HT1808

How to make movieclip controlled by button fade in/out on mouse over/out?

Hi,
I am new to Flash, and have tried searching numerous forums to the answer to this question, but nothing I try seems to work. Basically I am trying to create a single "Image" that triggers different animations when you mouse over different invisible buttons located on specific areas. The technique I am using is basically spacing out the animations over different frames, and using the gotoAndPlay command specifying the where the relevant animation is located.
Here is the code from my actions layer with two animations:
stop(); /*This ensures no animations are playing on the first frame*/
/*Mouse over event for redbutton1*/
redbutton1.addEventListener(MouseEvent.MOUSE_OVER, fl_MouseOverToGoToAndPlayFromFrame_2);
function fl_MouseOverToGoToAndPlayFromFrame_2(event:MouseEvent):void
     gotoAndPlay(2); /*This is the frame where the animaton triggered by redbutton1 is located*/
/* Mouse Out Event for redbutton1*/
redbutton1.addEventListener(MouseEvent.MOUSE_OUT, fl_MouseOutHandler_3);
function fl_MouseOutHandler_3(event:MouseEvent):void
     gotoAndPlay(1) /*takes animation back to the start of timeline where it stops*/
/*Mouse over event for bluebutton1*/
bluebutton1.addEventListener(MouseEvent.MOUSE_OVER, fl_MouseOverToGoToAndPlayFromFrame_2);
function fl_MouseOverToGoToAndPlayFromFrame_2(event:MouseEvent):void
     gotoAndPlay(30); /*This is the frame where the animaton triggered by bluebutton1 is located*/
/* Mouse Out Event for bluebutton1*/
bluebutton1.addEventListener(MouseEvent.MOUSE_OUT, fl_MouseOutHandler_3);
function fl_MouseOutHandler_3(event:MouseEvent):void
     gotoAndPlay(1) /*takes animation back to the start of timeline where it stops*/
Now basically all I need is some code that means that instead of abruptly starting and stopping the animation, the animation will fade in/out whenever the mouseover/out events are triggered. Note: the animation doesn't have to finish, it basically only plays while the mouse is over.
Any help would be greatly appreciated.

It will help oif you show the code for the code-based tweening. The basics of getting it working with the MOUSE_OVER/OUR commands is fairly straightforward.
You have listeners for both events, and the handlers for each listener is where you activate the tweens. For more seamless functionality it is usually a good idea to have the starting point of the tween be the point where the object currently is (its x or y (or both) propertiy) instead of a fixed value.

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll.

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll. and one just said *Itunes was not installed correctly. Please re install I Tunes Error 7 (windows error 127) . I've tried uninstalling and reinstalling it. But either way cant work. I really need some of your help! PLS HELP ME!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The error shares a similar pattern to that in the third box, so a similar approach should work. Look for CoreFoundation.dll in C:\Program Files (x86)\Common Files\Apple\Apple Application Support, delete it, then repair Apple Application Support.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

How do I get System.out.format to print out doubles with the same precision

Using the System.out.format, how do I print out the value of a double such that it looks exactly like it does if it were print from a System.out.println.
For example, take the following code:
double d = 12.48564734342343;
System.out.format("d as format: %f\n", d);
System.out.println("d as sout: " + d);Running the code, I get:

d as format: 12.485647
d as sout: 12.48564734342343

The precision of d has been lost.
I could bump up the precision as follows:
double d = 12.48564734342343;
System.out.format("d as format: %.14f\n", d);
System.out.println("d as sout: " + d);That appears to work, I get:

d as format: 12.48564734342343
d as sout: 12.48564734342343

However, that solution fails if d has a different precision, say 12.48. In that case I get:

d as format: 12.48000000000000
d as sout: 12.48

So how do I get System.out.format to print out doubles with the same precision as System.out.println?
Thanks..

YoungWinston wrote:
Schmoe wrote:
Interesting, but this is not what I am looking for...Your original question was "how do I print out the value of a double such that it looks exactly like it does if it were print from a System.out.println", and you've been told how to do that (although the pattern given by sabre may be a bit excessive - you should only need 15 '#'s).The initial phrase from my question was "Using the System.out.format, how do I..".
It's worth remembering that, unlike the Format hierarchy, 'format()' is NOT native to Java. It's a convenience implementation of the 'printf()' and 'sprintf()' methods provided in C, and first appeared in Java 1.5. Those methods were designed to produced fixed-format output; 'println()' was not.Perhaps it is the case that this can't be done.
Furthermore, Double.toString(), which is what is used by println() does not produce the same format in all cases; format("%.14f\n", d) does. TrySystem.out.println(1.8236473845783d);
System.out.println(1823647384.5783d);and you'll see what I mean.I am fine with that. It still displays all the precision.
I am simply looking for a way to quickly print out multiple variables on a sysout while debugging. I want it as syntactically sweet as possible. System.out.println can be a pain when outputting multiple variables like the following:
"System.out.println("a: " + a + "; b:" + b + "; c: " + c);"
For some reason, my fingers always typo the plus key.
I was hoping that System.out.format would be easier,along the lines of:
"System.out.format("a: %f, b: %f, c: %f\n", a, b, c);"
From a syntactical sweetness point of view, it is easier. However, the %f on doubles truncates the precision. I figured there must be a way to get the full precision.
DecimalFormat is syntactically sour for this purpose, as you need to instantiate the DecimalFormat.
fwiw I have enjoyed reading the suggestions in this thread...

Could any one tell me how to do the left outer join or right outer join?

Could any one tell me how to do the left outer join or right outer join in Webi Rich Client? thanks.

we can do it in two ways
1. In web intelligence level on the query panel click the sql query and write the statement what ever u want there by modifying the existing statement.
2. In universe level select the fields in the two tables that you want to make join and create the join between two tables directly by joining field in table 1 to the field in the table 2 by drawing a line and double click on the line to view the join properties,then on join properties if we check the table 1 outer then it is left outer join if we check on table 2 outer then it will be the right outer join.after exporting the universe to the central sever we are now ready to use in web intelligence with out being changed anything in the sql query.
endorse me if it is useful.
thanks & regards
Sreekanth.

I m not able to find out where is check out and open component(WCM)

hi everyone,
i m not able to find out where is check out and open component and how it works. As m not able to open & edit the native document that m assigning.Plz help me in this ASAP

Here's what I found. If you have a metalink login, try these links. Depends on what version of COAO you need.
CheckoutAndOpenInNative
Patch 6602355 Build version=2007-03-22 for 10.1.3.3.1
http://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=6602355
Version=2007-03-22 on edelivery in UCM Downloads
https://metalink.oracle.com/metalink/plsql/f?p=130:14:12648830947583585595::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,455524.1,1,1,0,helvetica#downloads
Version=7.7.0.244-2006-07-31 on edelivery in UCM Downloads
https://metalink.oracle.com/metalink/plsql/f?p=130:14:12648830947583585595::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,455524.1,1,1,0,helvetica#downloads
There's actually a mapping here to figure out what file these extras are in:
https://metalink.oracle.com/metalink/plsql/f?p=130:14:12648830947583585595::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,455524.1,1,1,0,helvetica

Tried to download(offline) a book from EBSCOhost, it was successfully checked out but no pop out windows for downloading. Any thoughts? Thanks.

Tried to download(offline) a book from EBSCOhost, it was successfully checked out but no pop out windows for downloading. Any thoughts? Thanks.

Okay, you need to contact support definitely about what's going on. Here is a form that will send an e-mail into support for you:
http://www.apple.com/emea/support/itunes/contact.html
As far as the prices, the difference is likely the laptop version is the SD version and the iPad one is available in HD. That's the only reason you'll see a price difference. It has nothing to do with the device with movies/movie rentals. Apps yes, these no.

Hey i cant get into creative cloud because it keeps asking me to verify and email that does not exist nor i have acess to. i cant find out how to sign out and i tried deleting it and re downloading it!

hey i cant get into creative cloud because it keeps asking me to verify and email that does not exist nor i have acess to. i cant find out how to sign out and i tried deleting it and re downloading it!

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-wrong email https://forums.adobe.com/thread/1446019

Solud Out, Sold Out,Sold Out.

Similar Messages

Maybe you are looking for