Solution Builder issue when activating a solution

Hi all,
I am working with the Solution Builder tool to create my own all-in-one solution.
So far I've created several eCATTs and BC Sets referencing my own variant files, and it works well.
But I'm facing an embarrassing problem when I create a BC Set or an eCATT without any variant nor external reference; the Solution Builder refuses to activate my solution because "Installation data upload incomplete" (when attempting to activate the solution).
On the whole, I don't really understand how the Solution Builder checks if the installation data is complete.
Thanks in advance,
Chris

Ok, I found the answer in note 1243244.

Similar Messages

Issue when activing Global Funds Management Function(PSM-FM)

Hi Peers,
I tried to active Global Funds Management Function(PSM-FM) in IMG. A message "Aktivierung des Haushaltsmanagements ist nicht erlaubt" poped up. And I also only have read access to Active/Deactive Funds Management but SU53 shows authorization check is ok.
What should I do for next? Thanks
Regards,
Eunice

Hi,
I am facing the same issue regarding "Read Access Only" to the activation of Funds Management under Actual and Commitment Update/Integration.
I've checked the component activation and found that
1) ES-PS is activated under SPRO
2) IS-PS is checked under BF11, but the checkbox status is greyed, so that it's impossible to change it.
I've tried to delete the IS-PS entry and re-insert it...the action was successful but the issue remained...
Any clues?
Thanks

Why is there an error when activating custom wsp's (timer job) via SharePointUI?

We have created a Timer Job Project.
Before packaging wsp and deploying via PowerShell:-
1. If I set scope to Web and go to site features then I hit on Activate it gives error
(sayin to enable debug for error msg in web.config).
2. Similarly, if I set scope to Site, then if I go into site collection features and activate,
it give same error.
3. If scope is set to Web Application then the feature is activated by default (under
web app features), but cannot see the job under job definitions.
4. If scope is set to farm, then (under farm features) similar to above point no. 3
There is also error when deactivating features which are already activated when a package
is deployed. for example: web applicaiton feature.
Further, I cannot see the timer job under job defn unless it is scoped to SITE..
Why is this?
I donot get the issues when activating the features via PowerShell. Why is this?

Hi Nachiket Kamat,
When you are using web scoped or site scoped features to install the timer jobs, the account that does the scheduling must have write permissions to the configuration database of the server farm, usually, the identity of the application pool that is hosting
the SharePoint site does not have permissions on the configuration database, this is the account that is used when you activate the feature through the browser interface, this may cause the feature activated failed.
Another scenario that you met when you change the feature scope to web application, job definition cannot be seen, this may be caused by the feature receiver code, like if scope to web application, then get the web application from properties.Feature.Parent
as SPWebApplication, if you change the feature scope, then this also need to change to get the proper object.
Thanks,
Qiao Wei
TechNet Community Support

CCE Web Administration - Active Directory issue when managing agent attributes

I am experiencing an issue when managing agents (supervisors specifically) in CCE Web Admin. When attempting to add / remove / modify an Attribute for a supervisor agent we are getting an error that the supervisor must have a valid active directory account. (Screenshot attached) The agents that this is affecting are correctly configured in ICM as a supervisor and ICM was able to successfully move their AD account into the 'Config' AD Security Group. From looking at the logs on the AWS it appears that the Web Admin tool is attempting to lookup their account in AD via UPN by appending their username to the domain name.
Log Snippet:
exception=com.cisco.ccbu.api.jaxb.error.ApiException: supervisorUserInfo.userName: Could not find user. Check if a domain account exists for [email protected]
This isn't going to work for some users in our account because we have multiple suffixes in our domain. (Our domain is a single forest and I'm not aware of a requirement to have a single suffix.)
I'm curious why it wouldn't use samaccountname which is what I believe ICM Configuration Manager is using. Has anyone else experienced this issue?

Lo and behold, my AD sync started working.
Though I have added the site to my local intranet sites, I'm not very confident whether this was the actual solution. I've performed several actions configuring my farm before I started troubleshooting this issue again, so it might be another action that
solved this.
Alemaitre: can you try the following please:
See if the SharePoint Web Service site is started in IIS. If not, start it, see if that works.
Instead of adding the site to your Trusted Sites, try Local Intranet Sites (click Advanced to add sites besides using auto-discovery)
Turn the Security Level for the zone all the way down.
Turn off Compression for your site in IIS, do an iisreset, see if that works.
I've also had to remove a host header from my MySite portal (running on port 8080 here), unlikely for this to be the cause but it's just one of the things I did this morning :-)
Should I think of anything else, I'll let you know.
Bonne chance.

Issue related with the Date Format --- error when activating the DSO

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...
Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..
is there any routine to solve this or i have to go for data selection in info package ......
I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT*
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE*
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZDUEDAT*
Value '20101402' of characteristic 0DATE is not plausible
Thanks
Baskar
Edited by: tjgnanabaskar on Aug 6, 2010 5:35 PM

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..is there any routine to solve this or i have to go for data selection in info package ......I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT
Value '31122009' of characteristic 0DATE is not plausible
Thanks
Baskar

Getting error when activating serial key with cs6 creative suit specifically for the Flash Builder 4.6

I got he the software Adobe Creative Master Suite CS6
was able to activate all the software except Flash Builder 4.6 keep getting message Serial number is not valid cs6 master collection serial.
Is there anything else needed to be done when activating the program.
Please advise

I have been able to resolve by completing clean/complete uninstall and re-install -- as per these instructions:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Issue with activation of 0FISCPER

Hi Friends,
I have an issue with activation of 0FISCPER.Based on this link i went uncheck the hirearchiel tab 0CALMONTH and 0FISCPER Not active in BW Production
and i am trying to activating it is saying already exist transformations it is going to deactivate.
what is solution for getting my original strucure of 0FISCPER without distrubing the exist transformations.
Thanks
rao

thanks for your Quick reply,
i am in DEV.
It's already installed,but when i am installed my cube i found 0FISCPER Info object is in inactive status.based on above link i followed and uncheck the Hierarchie table.when i am activating same 0FISCPER it is saying already exist transformations.
Now i want before uncheck what ever the existing structure of Hierachie structue i need,how i will get?
Thanks
Rao

Facing error when activating ODS

Hi All,
i am facing error when activating ODS. THe load was succesfull. when i checked in RSMO detail screen all the data packets are green but under subsequent processing it shows following error message
1.Activation of data records from ODS object ZOPA_8 terminated
2.Error when assigning SID: Action VAL_SID_CONVERT table 0MATERIAL
3.Error getting SID for ODS object ZOPA_8
"And under others also it is showing same message.
Can any one please suggest how to solve this issue. Its very urgent.
Waiting for appropriate solution...
thanks
kamal

Hi,
Check the following.
1. 0MATERIAL might be the reference char for ZOPA_8.
2. If so, then need to check conversion routines are same for both.
3. Then check the data (In PSA) under ZOPA_8 and check if it has any special chars or failing due to conversion routine.
4. Correct data and load it again.
Hope it works.
Regards,
Aditya

Hello, i have one issue when i hit back button of F Fox than it will show me " Document Expired " alert message.. i need to avoid this alert.

Hello, i have one issue when i hit back button of F Fox than it will show me " Document Expired " alert message.. i need to avoid this alert.
because my site is based on ajax so i need same page with my all activity i perform before i go next page when i hit back button..
Please give me solutions of this problem if possible.
Thank you

Are you sending HTTP response headers that instruct Firefox not to cache the pages?
You can get a "document expired" message if you use the back button to return to a specific page and the web site has instructed Firefox not to cache the page.<br />
Firefox tries to retrieve the page from the server, possibly by sending POST data.

Missing data in few fields when activated data in DSO

Hi,
I have loaded data into a DSO. Before activating the DSO i can see the values for Sales Organization, Distribution channel and Division fields. But after activation these values disappear.
These values are maintained through CONSTANT in transformations.
Any solution please....
I hve tried it through routines also but no use... same prob.

Hi Prathish,
The data is visible in New Data Table, but when activated the values disappear.
I have reactivated the transformation and reloaded but no use..........
Any other idea.........

Error when activating the master data

Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
<b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
If anyone came across this kind of problem plz share the solution.
Regards
Annie

Hi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie

Printing issues when printing to Server 2008 R2 Print Server

We have a problem with netwok printing that encompasses many different areas and versions of Windows OSes so I will be posting this in a few different places.
Let me lay this out for you. We have a single Server 2008 R2 print server with 300 printers of various models. This print server has both 32 and 64-bit drivers installed for every printer. For the HP printers we are using the HP Universal Printing PCL 6
(version 61.94.3.37) and for the Ricoh printers we are using their PCL6 driver for universal printing version 3.5. All drivers run in Isolation mode and no printer gets published to AD.
We have a mix of Windows clients printing to these printers, both XP Pro and Windows 7 32 and 64-bit.
Now for the problems: The other day one Isolation host on the server went crazy, processing was hitting 100% and memory was fluctuating and growing a lot. After investigating a little that isolation host was having issues accessing the Ricoh Driver (which
was 3.4 at the time). In an attempt to resolve the issue we updated the driver to V. 3.5. This seemed to fix the isolation issues and things calmed down however this is the beginning of many other issues for the clients. Both Windows OS versions (XP and 7)
don't seem to be either downloading and installing the updated driver and/or doing so correctly. Clients are now experiencing extremely slow printing, applications such as Word, Outlook, Excel and others open slowly and it can take 2-3 minutes for print dialog
boxes to open. In all cases it seems that we have to have a tech delete the printer(s), delete the driver and then re-install the printer to make things better but for some reason, which is really unknown, this process doesn't work for every machine and on
some we can't even remove the old drivers at all without booting into SafeMode and doing it that way.
With all of that said, are there any suggestions as to why the clients aren't downloading and installing the drivers from the server correctly? How to avoid these issues when we need to upgrade the drivers on the server in the future? Most importantly right
now, are there any recommendations or scripts on how to force the deletions of the printer, driver, reset the print spoolers and then re-add the printers in a more automated fashion?
I have played with both wmic, pnputil and printuidll and am trying to put something together but without a set solution that will work consistently it becomes a lot more difficult.

We are experiencing a very similar issue.
Windows Server 2008 R2. Printers are deployed over group policy.
Clients range from Windows 7 to Windows 8. Citrix XenDesktop and XenApp environment also connects to these endpoints.
We have A wide assortment of HP printers, and Ricoh Printers.
For the ricoh's we have been historically using the PCL6 drivers for the individual device type (not universal print). Up till recently, it all was working fine, until about some time in the middle of june, when everything just seemed to go crazy.
The issue was resolved by moving off from the PCL 6 drivers and using the PCL5e driver counterparts on all of our ricoh printers.
It would crash XenDesktop applications, it would crash office applications.
The print spooler would lock up, even if the ricoh printers were not actually used, just as long as they were loaded.
Even after loading PCL5 on the servers, some of the clients would simply not download the PCL5 version of the driver from the print server. In order to resolve this, I have created the steps below. Be advised, this may possibly cause damage on your system.
We just found it worked great for us. Local printers will likely have to be manually reinstalled after this.
Directions
Stop the print spooler
Open C:\Windows\System32\Spool and delete the following
All files in SERVERS
All files in PRINTERS
All files in drivers
All files in prtprocs
Start the print spooler
Open a command prompt as administrator, and run the following command
Cscript C:\windows\system32\Printing_Admin_Scripts\en-US\prndrvr.vbs -x
This should further delete all print drivers.
Open a command prompt as a standard user (not administrator) and run the following
Gpupdate
Now wait. It takes a while, but the printers will slowly start to repopulate.
I am still not sure what is going on with the PCL6 drivers for ricoh, and why this issue is happening. I'm guessing it has something to do with the Ricoh auto update that is included in their pcl6 drivers. Maybe some sort of auto update happened recently.

My Itunes software, when activated, cuts off 3" of the right portion and 1" of the bottom of the screen. Everything available in this section of the screes is not available, making the software practically unusable. Has this happened to anyone out there a

My Itunes software, when activated, shows an image on the screen of the normal itunes image except that about 3" of the image is cut off on the right side of the screen and about 1" of the bottom. All functions shown work. Any function in the part of the screen that is not shown, is not available, making the softwave almost nonfunctionable. When I upgrade, this is usually resolved, until it starts happening again. Since I currently have the latest version of Itunes, I cannot try this solution, which is only temperary anyway. Can anyone help me?

Could you post a screenshot of the display for us please, bili?
Save the screenshot in an image file, start a new reply here, and use the wee camera icon at the top of the reply window to insert the image file into the reply.

Date/time stamp issue when transferring vids/pics to computer. Help please.

Hi, i am having an issue when transferring my vids/pics from my Z2 to my PC.
On all my previous phones when transferring media to my PC it would be copied and labelled with a date stamp followed by a picture number- an example being 2014-01-13- 0123. This has always made organising and finding my pics/vids in there relavent folders an eay task.
The problem i am now faced with is when i transfer pics/vids from my Z2. The pictures are stamped with DSC_0001 for example and the videos with MOV_0001. This means when on my PC i have to examine each file individually to find out its date and time of origin.
Even more of an headache is everytime i have transferred files from my Z2 and then take more pics/vids and then try to transfer them to my PC the computer will not allow transfer as the stamp on the file i am transferring from my Z2 eg - DSC_0001 is already present on the PC from a previous transfer. This means i have to rename all the PC files first.
I hope this makes sense and hopefully there is an easy fix.
I am new to Android and overall i am very happy with the operating system, being a massive improvement generally over my previous phones. Fingers crossed this is down to my lack of knowledge and just involves a settings change somewhere.
Thanks in advance for any help.

Hi.
The case you described is right. But it´s not a bug.
Why don´t you organise your pics/vids on your desktop with picasa for example. There you have many tools, also to rename your files, so that the filename contains the creation date.
Or you use a cloud solution like dropbox, google+ or amazon clouddrive to sync pics/vids from your phone automatically.
But never use the built-in sony playmemories. It´s really slow, pics are down-scaled to 1280x720 and vids are not synced. It´s the worst cloud-service for pics I´ve seen.
Best
arni

Issue when trying to upgrade FB 4.7 to AIRDSK 3.6

Hi,
I'm desperately trying to upgrade FB 4.7 to AIRSDK 3.6 since 3 weeks.
I've followed the various solutions found on forums and the various processes displayed by the "helpx.adobe.com" pages, but none of them works.
So please, if a member of Adobe Support Team or someone who succeeded to perform the upgrade reads this, I need help and if possible a detailed strp by step process.
Thks in advance for answers.

I think i tried all the available ones, and there are many. Why can't we
have a definitive automatic upgrade solution instead of having to do
such a number of manipulations ?
Le 14/03/2013 04:41, Flex harUI a écrit :
>
Re: Issue when trying to upgrade FB 4.7 to AIRDSK 3.6
created by Flex harUI <http://forums.adobe.com/people/Flex+harUI> in
/Flex/ - View the full discussion
<http://forums.adobe.com/message/5146932#5146932

Solution Builder issue when activating a solution

Similar Messages

Maybe you are looking for