Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

Hello All,
I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer. Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
Thank you
Roy B

I have a similar problem with the J4580 and my new Windows 7 64-bit laptop. HP Solution Center says that the printer is disconnected. Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file. The printer truncated the page after printing just the top 10%. The printer is OK with my wife's Windows 7 32-bit laptop.
I've seen many other people complain about similar problems in this and other forums. Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit. Can HP please provide an updated driver or patch?

Similar Messages

How to scan with an office jet 6500a and a Mac OS 10.9.4?

how to scan with an office jet 6500a and a Mac OS 10.9.4?
This question was solved.
View Solution.

Hi midandco,
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend readding the printer with theOS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Please let me know.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Printer Problem with HP Office jet 6600

I have the following message displayed on the printer.
There is a problem with your printer or ink system. Turn the printer off then back on if the problem persist contact HP.
I have searched through the HP suggestion for repaid but find no match.
I did change my cartriges for the first time. The magenta supply showes low even though its a new cartrige all the other show full,
I'm under waranty but have no idea how to move forward
Any help would be greatly appreciated

Hi @FrankieP,
Welcome to the HP Forums!
I understand that you are getting the error message, "There is a problem with your printer or ink system. Turn the printer off then back on if the problem persist contact HP". With you HP Officejet 6600. I am happy to help with this error!
I would recommend to look through this guide, 'Problem with Ink System' Error Message Displays on the Computer During Setup.
If that guide does not resolve your issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Looking for Solution Center software for my Office Jet Pro 8600 All-in-One

I have installed the Drivers and Full Feature Software in order to get Solution Center, so that I could scan multiple photos into individual files. It still does not appear as installed. I have an HP DV6-73680L laptop running Windows 8.1.
FYI, I loaded the software from the link below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&dlc=en&lc=en...

Maria,
Just checked again...
I do not know whether this will make a difference - I did find this:
HP Officejet Pro 8600 N911a Firmware
Note the description at the bottom of the page regarding the scanning feature. It is unlikely that the exact feature you seek is included. There are times that the description is somewhat lacking in detail.
Click the Kudos Thumbs-Up to show appreciation and say Thanks.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

Compatibility problem with USMT 6.3.9600 and Windows Vista

Hi,
We have a problem with USMT 6.3.9600 ()ADK 8.1) while running on Vista. At start we are receiving an error saying it is not a win32 application. USMT 6.2.9200 would work on Vista but not on Windows 8.1.
Any workaround?

For an example with multiple USMT versions, see:
http://blogs.technet.com/b/configmgrteam/archive/2013/09/12/how-to-migrate-user-data-from-win-xp-to-win-8-1-with-system-center-2012-r2-configmgr.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Hanging problems with JRE 1.4.0 and Windows 2000

We have written a Java application which is an editor using Swing components. Most of us happily run it on Windows 2000 PCs with a decent PC spec of 512 Mb RAM and 1 Gb Processors and Java JDK 1.4.0 installed. However, other users with smaller spec PCs of 128 Mb RAM and 450 MHz processors and using only the Java Runtime Environment v1.4.0 keep making the application hang.
I've done plenty of debugging and investigation and am now convinced that this is not our application software that is causing the problems - the hangs are never consistent in their behaviour. I don't think that lack of memory is the problem either as it hangs with no other application running and it only uses a small amount itself.
So what could cause this problem ? Is there a significant difference between using the JDK and JRE ? Could it be PC spec ? Are there some config settings that I should check ?
Any help would be appreciated as the application has become unusable for our users when we seem to be having no problems at all !
Sarah.

I have been tring to track down a similar problem for quite some time, with no luck as of yet. On 4 out of 6 machines running Windows 2000 Pro, any application that I write using any graphical component AWT or Swing, will hang at run time using JDK 1.4. I have no solution for you but I am hoping this message might spark some more advice.
Bryan

I'm having problems with the wireless LAN Guest and Windows 7

Only with Windows 7 when a user logs in in the Guest WLAN two connections appear in Windows 7, the user authenticates on the page but does not leave the internal network. Can someone help me with this?
We uses WLC 4400 and LAP 1252

I have the same issue. Using webauth and Windows 7 and IE9 and windows 7 and firefox. Also MAC\Safari.
Client gets an IP address, accepts the certficate error message. But never gets to the webauth page.
I have a TAC open so will update when i get more info.

Recurring Printing Problem with HP Office Jet Pro L7590 w/Windows XP operating system

This printer is a real workhorse but frequently, when printing large documents from the internet, the type changes from regular print to total giberish -something similar to a Russian Script. It does this midsteam into the document and there is no error message or any indicatin that something is wrong. It is also hit or miss-sometime I get the entire document in English and sometimes I don't. Unfortunately, I'm wasting a ton of paper and time to redo everything when it occurs.
Other than the above, it works fine. Any suggestions on how to correct?

So the printer will begin to print garbled text in the middle of large document print jobs, from time to time? Is this correct?
How is the L7590 connected to the WinXP PC? (USB, ethernet, wireless)
How long is the USB cable if connected this way?
How far away from the router is the printer if connected wirelessly?
If usb connected, how old is the USB cable?
It is possible that this problem is coming from a connection problem. If a minor connection issue exists, then it can leave portions of the print language being sent as commands to the printer out. This can change the printer's interpretation of the printer command language.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Problems With my Office Jet 7500A

Im getting error message on printer screen when I select Print Email Address that the printer was unable to connect to the server. I confirmed that my printer is connected by printing wirelessly but I cannot retrieve my printer email address.'
Help!

Can you access the Internet from the front of the printer (thorough apps)? If so, that is good. If not, enable apps and try again.
Now, let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know this, enter the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter the router IP address for the gateway and the first DNS entry. Leave the second blank.
- Click 'Apply'
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Audio problems with SBLive! 5.1 and Windows XP Pro,

I just reinstalled Windows XP Pro from a slipstreamed CD with SP2 on it. (That means I can't just remove SP2 without reinstalling Windows.) Now, when I play a game the audio skips and stutters for the first 5-0 min of gameplay. The skipping and stuttering goes away eventually, but its REALLY annoying. This is the only hardware problem I've had with SP2, and I would like to know if there is a patch in the planning to fix all the SP2 Sound Blaster problems, or do we all have to find our own work around for these things.
If anyone has a solution for this please let me know. I've already installed the UniDriver thing, and it still acts up. I've tried removing and reinstalling everything, cleaning out my registry, and rebooting. Defragging my HD did not work either. Nothing seems to work.
CPU= AMD Athlon XP 2600+
RAM=704Mb
Video=GeForce 4 MX440 AGP 28DDR
Please help soon.

I think I may have solved my problem. I recently installed Full Spectrum Warrior. I installed it to a different dri've than all of my other games. Lo and behold, no audio problems. After some further investigation, I believe that the audio problem lies in an old hard disk dri've that is in the beginning stages of failure. After I actually thought about it, my load times from this hard disk have been taking forever, but Full Spectrum Warrior loads very quickly. The dri've is going to die! But I guess it's ok, the dri've is almost 0 years old, and this is the 3rd computer its been in.
Thanks for your help,
Josh

Problems with Itunes 10.5.1 and Windows 7

Sirs,
yesterday my old pc with Windows XP SP3 was replaced by a new laptop with Windows 7 32 bits.
When I tried to install the new version 10.5.1 of itunes show several errors and don't work.
I install then the version 10.1.4 and was installed without problems but don't accept my Ipod touch because requires the new version of software.
Then, I tried to download the new version using the Itunes update manager and failed to install the version again.
Attach is a part of application event log.
Best regards,
Carlos G

I forgot, the operating System is Windows 7 Profesional 32 bits.
Error    12/10/2011 8:24:17 AM    SideBySide    33    None
Log Name:      Application
Source:        SideBySide
Date:          12/10/2011 8:24:22 AM
Event ID:      33
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
Activation context generation failed for "C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b ",type="win32",version="8.0.50727.6195" could not be found. Please use sxstrace.exe for detailed diagnosis.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SideBySide" />
    <EventID Qualifiers="49409">33</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-12-10T13:24:22.000000000Z" />
    <EventRecordID>5171</EventRecordID>
    <Channel>Application</Channel>
    <Security />
</System>
<EventData>
    <Data>Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1 e18e3b",type="win32",version="8.0.50727.6195"</Data>
Error    12/10/2011 8:29:12 AM    MsiInstaller    11935    None
Product: Apple Application Support -- Error 1935. An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.CRT,type="win32-policy",version="8.0.50727.6195",pub licKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"'. Please refer to Help and Support for more information. HRESULT: 0x800736B3. assembly interface: IAssemblyCacheItem, function: Commit, component: {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}
Error    12/10/2011 8:24:22 AM    MsiInstaller    11920    None
Product: Apple Mobile Device Support -- Error 1920. Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services
Error    12/10/2011 8:24:22 AM    SideBySide    33    None
Activation context generation failed for "C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b ",type="win32",version="8.0.50727.6195" could not be found. Please use sxstrace.exe for detailed diagnosis.
carlosfromcucuta wrote:
Sirs,
yesterday my old pc with Windows XP SP3 was replaced by a new laptop with Windows 7 32 bits Profesional.
When I tried to install the new version 10.5.1 of itunes show several errors and don't work.
I install then the version 10.1.4 and was installed without problems but don't accept my Ipod touch because requires the new version of software.
Then, I tried to download the new version using the Itunes update manager and failed to install the version again.
Attach is a part of application event log.
Best regards,
Carlos G

Problems with email in Elements 7 and Windows XP

I cannot send emails as Attachments or via Photomail using Outlook as my client, even though I have set Outlook as my default in Preferences. Any suggestions would be appreciated.

Yes, I am able to use Outlook - it is my default email program and I use it all the time.
Thanks

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did).

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did). But I'd like to use iCloud with iPad.

Hi Pete. The repair of disk permissions can help resolve any application crashing or misbehaving.
As for Lion and the two camps, I think that is a reasonable observation. In my office we have about a dozen Mac's and about one third of those Mac's had problems after updating from 10.6 to 10.7. The main problem for these Mac's was a loss of wifi stability. But for the other two-thirds, Lion was a smooth transition.
Personally, my Lion experience was fine. But I did get a new i7 MacBook Pro with Lion already installed and only had to migrate my user data from a 10.6.8 TM backup.
So I think that is a key for Lion's operational success. A clean install of Lion on a new Mac would not cause too many operational issues. But an installation, or more correctly, an update to Lion from SL increased the chances of failure for some users - especially when old software & plugins resided on the Mac. And I would say that they were the people that you saw at the Apple store.
As for the "latest release of Lion fixed my problems" statement, my experience with these and other forums is that people mostly only go there to complain about the problems they are having. If they are having no problems then they either keep it to themselves or they try to help the users who are experiencing trouble...

How can i get my hp office jet j4550 to print from word 7?

How can I get my HP Office Jet j4550 to print from the Microsoft Word 7? I downloaded the drivers for the printer and reinstalled Microsoft Word 7.

Do you mean Windows 7?
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Problems with Microsoft Office 2008 and 2011

Hiya,
I am running Mountain Lion on my Macbook Pro and I'm having ongoing problems with the Office system. I'm doing a PhD so I use footnotes all the time and in Word 2011, the autosave function makes the footnotes disappear from the bottom of the page, but I'm not comfortbale working wihtout autosave running. I deleted Office 2011 and put Office 2008 back on my machine. However, since I re-installed Office 2008, the whole OSX seems to have slowed down.
Could Office 2008 cause my whole system to get sluggish? Is there anything that I can do about it?
I am also wondering if there is there another solution to my original Office 2011 problem with footnotes that doesn;t involve disabling autosave? Has anyone else has similar problems with footnotes? I just wiped my whole system and re-installed all the programmes, so I am surprised to still be having these same problems with Office!
Thank you for any help and advice!

You should try asking your Office for Mac question in the Office for Mac forums where the Office for Mac gurus hang out.http://answers.microsoft.com/en-us/mac?auth=1

Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

Similar Messages

Maybe you are looking for