Solution Center problem

My solution center always pops up on the screen.  It won't go away unless I stop it through the Task manager.  It says.  the feature you are trying to use is on a CD-Rom or other removable disk that is not available.  I cannot find my CD.  Is there a way to download this and where do I find it and which one do I down load?
I have a HP officejet J4580 all in one.  My printer, fax & scanner have worked in the past.  The printer does work now but I cannot scan.  I am using window XP Media Center.  How can I soluve this problem??
Help

if u have the cd then open up the cd(do not install the software or run it)
then open the up setup folder and u would find solution center there.
then open it up then u  would find the solution center installer.
then make a right click and click on repair.
then the computer will prompt to restart the computer.
then after restarting the computer the solution center will work.
if it doesnt work uninstall L3 from the cd.
the path is util>ccc>uninstall L3
then try to install the software from the website.
this will surely work.

Similar Messages

  • Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

    Hello All,
    I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer.  Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
    Thank you
    Roy B

    I have a similar problem with the J4580 and my new Windows 7 64-bit laptop.  HP Solution Center says that the printer is disconnected.  Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file.  The printer truncated the page after printing just the top 10%.   The printer is OK with my wife's Windows 7 32-bit laptop.
    I've seen many other people complain about similar problems in this and other forums.  Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit.  Can HP please provide an updated driver or patch?

  • Adobe Flash Player / HP Solution Center Problems!

    Hello
    Last night everything was working fine. Until I installed the latest Flash Player 10.1.53.64 RC7. Upon reboot my HP Solution Center was corrupted triggered a pop up error and tried to get me to reinstall it. I did a restore back to earlier in the day and proved it was Adobe Flash Player. My HP Solution Center then worked great. Tried installing the latest Adobe Flash Player again and same problem. So I did another restore and everything is working great still. What conflict or what could be causing this bug in Adobe Flash Player 10.1.53.64 RC7 and HP Solution Center? Are you working on this and will there be a patch soon? Are you aware of this conflict?
    I am running indows XP Pro SP3 and my printer is an HP C4580 Photosmart. This same problem also happened on my Wifes Laptop running Windows Vista Home SP2 using the same printer. Very frustrated here.
                                                                                                                                     Thanks Dale

    I have the same problem with my Win XP,
    SP3 computer. Since Flash pla
    yer was upgraded to version 10, my HP Sol
    ution Center has been buggy. Unfornun
    ately a few days ago, I installed the latest upgrade for Flash player 10
    and can't use the Solution Center, giving error message
    1904 and 1905 cannot complete the op
    ening of HP Solution Center cannot find Flash Player 9
    . I need the Solution Center to use my scanner and there
    fore Adobe or HP needs to make a patch for th
    is.

  • Lenovo Solution Center problem

    Hi,
    I have G780 and roughly 3 weeks ago every time I start my computer a small pop-out window from Solution Center appears saying the following: "The feature you are trying to use is on a CD-ROM or other removable disk that is not available. Insert the `SolutionCenter' disk and click OK." and at the bottom of that window is "Use source: 1" There's also another smaller window behind it which is also from Solution center saying: "Please wait while Windows configures SolutionCenter" - it is an installer window.
    Well, so that was a description of the problem, the funny thing is that the Solution Center which I have on my laptop was pre-installed and it works perfectly, I've updated it to the latest version 1.1.011 but it didn't solve the problem, every time after windows is loaded, those two windows appears and I just have to cancel whole installation process to keep continue my work. I am suspicious of the idea that it started after some windows update, but I'm not sure... 
    Any suggestions? Thanks.

    Hallo schlueterdi,
    vielen Dank für die Nachricht und "willkommen" im LENOVO-Forum.
    Ich werde mal eine Anfrage an unsere Entwickler/Labor schicken.
    Sobald ich eine Rückmeldung erhalte, werde ich mich hier melden.
    Danke und Gruß, Marcel
    → Wenn Du eine Lösung auf Deine Frage erhalten hast, markiere diese bitte als gelöst - Hilfreiche Beiträge verdienen Kudos. Zögere nicht Kudos zu vergeben.   

  • HP Solution Center Problem

     I have an HP Pavillion a1400e desktop with an HP PSC 1410 All-In-One printer, scanner.  I've been using HP Solution Center to scan.  I now get the message "No HP devices detected" with HP Solution Center.   I can still print documents (not using the HP Solution Center)
    This question was solved.
    View Solution.

    Hey Tom,
    Thanks for the update.  It sounds like the whole software package has become problematic.  I see you are using the HP Pavillion a1400e and this would have shipped originally with Windows XP.  Is this still the OS you have on this system?
    I would advise a full cleanout of the software for this printer on your PC and re-installing.  I will provide the steps below for doing this, but I understand the hesitancy as printing is at least still functioning.
    1. Run disk cleanup on your computer
    2. Download and run the software and drivers below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=441115&tool=&
    3. Once the download is done extracting, cancel the download.
    4.. Press the Windows key + R on the keyboard to bring up the run menu.
    5. Type %temp% in the run field and click OK.
    6. Look for, and open the folder starting with 7z (Example: 7zS2356)
    7. Open folder Util
    8. Open folder CCC
    9.  For HP computers run the Uninstall_L3.bat
    10. When the uninstall has completed restart the computer
    11. Run Disk cleanup from Accessories\ System Tools
    12. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    13. Use this tool to clean the system and registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    14. Download the full feature software and drivers
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=441115&tool=&
    15. Run the download to reinstall the printer
    Let me know how it goes,
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Problem Flash Player bei IE 11 mit HP Solution Center+Datei Flash.ocx

    Hallo
    ich versuche ein für mich sehr schwieriges und komplexes Problem zu lösen und bitte um Tipps oder Hilfe.
    Gerät: Notebook / Windows 8.1  - früher Vista....und HP Drucker und ich bitte um Entschuldigung für die lange und komplexe Schilderung
    da ich schon mit sehr langen und wiederholt fehlgeschlagenen Lösungsversuchen und Suchen in diversen und HP Forum
    recht ratlos bin.
    Ausgangspunkt als zeitliche Folge von Ursache und Wirkung kann ich schlecht rekonstruieren. Entweder hängt es damit zusammen, dass ich ausser Chrome und IE noch Firefox Browser installierte bzw. auch das letzte neues Software-Treiber- Update von HP installiert wurde oder auch nach einem Microsoft Update KB 3001237 vom 16.10.
    Das Problem zeigte sich vordergründig im fehlerhaften Aufrufen des HP Solution Centers meines All in One Druckers Officejet 6500 E709a.Ein Fehlerprogrammbild namens HPdirec. exe gibt die Fehlermeldung aus: '
    C....Windows System 32\ Macromed\ Flash\Flash.ocx ist entweder nicht für die Ausführung unter Windows vorgesehen oder enthält einen Fehler. Installieren Sie das Programm mit den Originalinstallationsmedien erneut oder wenden Sie sich ...an Ihren Systemadministrator oder Softwarelieferanten..
    Im nur starr auftauchendem schwarzem Solution Fenster heisst es 'dass die auf Ihrem Computer installierte Version des Flash Players nicht mit dem Internet Explorer verwendet werden kann.'
    Dann Link-Hinweis auf Adresse Adobe usw.
    Dort wird mir aber lediglich nach mehreren Klicks mitgeteilt, dass der Flash Player bereits im IE integriert bzw. installiert sei.
    und wenn ich doch hartnäckig und laienhaft versucht habe ,einen Adobe Flash Player ausfindig zu machen und downgeloaded hatte und ihn dann installieren wollte, entpuppte es sich als nicht installierbar bzw. das KB-Update von Microsoft (siehe oben)
    In den AddOns des IE finde ich unter Name 'nicht verfügbar'  und Herausgeber 'nicht verfügbar' lediglich einen 'Shockwave Flash Objekt' als aktiviert - kein weiteres AddOn und unter Sicherheit ist kein Haken bei AktiveX-Filterung...
    Unter dem Ordner C...... Windows\System32\Macromedia\Flash finde ich
    nur
    activex.vch
    Flash64_15_0_0_189.ocx
    FlashInstall.log
    FlashUtil64_15_0_0_189_ActiveX.dll
    FlashUtil64_15_0_0_189_ActiveX.exe
    FlashUtil64_15_0_0_189_Plugin.exe
    NPSWF64_15_0_0_189.dll
    plugin.vch
    aber nirgendwo ist dort und auch (Suche gestartet) im C:\Laufwerksverzeichnis die oben in der Fehlermeldung angegebene Datei Flash.ocx zu finden.
    Zunächst hatte ich diese Fehlermeldung nur mit meinem HP Solution Center gekoppelt, aber
    die  Meldung tauchte auch woanders auf. Ich habe nach unendlich vielen Versuchen mit Deinstallation, Installation - IE Deaktivierung - Aktivierung drei Cleaner Tools laufen lassen in der Hoffnung, dass durch Bereinigung alter oder fehlerhafter Registry Einträge das Problem von alleine resetten würde.
    Und ausgerechnet bei dem Tool Wise Registry Cleaner tauchte die gleiche Fehlermeldung auf wie oben nur mit einer anderen Bezeichnung vor dem .EXE - und im Hintergrund als zunächst starres Bild die Umrisse vom Menü des Tools.
    Jedoch: Als ich lediglich auf den OK Button der Fehlermeldung drückte, wurde das Tool Menü vollständig geladen und ich konnte damit arbeiten, im Gegensatz zu dem HP Solution Center.
    Ich benötige aber das Menü des HP SC um im Besonderen die Scan- und Speicherung Funktion des Geräte zum PC hin zu nutzen und auch andere Funktionen des Multi-Druckers gebrauchen zu können.
    Danke für eine Reaktion gleich welcher Länge und Art auch immer im Voraus...!!!

    1.   Re: Problem Flash Player bei IE 11 mit HP Solution Center+Datei Flash.ocx  
        玩玩 无聊     2014-11-6 下午11:49  (回复 ackibaun)    
    Thank you for taking our survey. We value your feedback.
    If you need help, we want to hear from you.

  • HP solution center home screen problem?

    Hi guys, 
    I just boat All in one inkjet K209g. I installed all the drivers from CD on Windows Vista.
    And I have a problem in homescreen. Here is the picture?
    Basically, I can not see any feature buttons: Scan, Print.
    I have installed all the drivers properly. It can print properly, the scanning function is not working.
    I also checked with HP Scan and Print Doctor, "HP Twain Scan" failed and it says "Unable to connect to scanning software"?
    I reinstalled, restarted, reconnected but nothing worked so far?
    This question was solved.
    View Solution.

    Hi nomalum, I noticed your post about your issue with your Solution Center and scanning problems. I see that you have installed the software using the installation disk.
    I recommended the following:
    1. Uninstalling the software. Click here to uninstall
    2. Restarting your computer.
    3. Reinstalling the software from the download. Click here to install
    I hope this helps you, take care.
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Problems with HP Solution Center Display

    I am using Windows 7 and IE.  I have most recent Flash Player.  Solution Center no longer displays.  I have tried suggestions on website.  Can't find Control Panel for Flash Player.  Does anyone have a resolution for the display problem?  Also Weather Channel no longer displays.

    Hello there! Welcome to the forums @dstef1605 ,
    I have some suggestions in mind for the issue you're having with installing your printer on Windows 7. However, I would first need to know which printer you have.
    Please let me know the printer model and we will troubleshoot from there!
    Also, if you have an all in one, make sure you can make copies from the printer and include the results in your reply.
    How Do I Find My Model Number?
    Happy Monday!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Solution Center stopped working after Flash Player problem

    HP solution Center won't open.  Flash Player deleted in error.  HP automatic update just before issue.
    HP Photosmart C7280
    Windows Vista 32-bit
    Google Chrome says Flash Player automatically updated when try to download
    Printer and scanner working from printer
    This question was solved.
    View Solution.

    Hi,
    Make sure to update the latest Flash Player for your PC (And not the Google Chrome) Plugin by going to http://get.adobe.com/flashplayer via Internet Explore.
    Reboot the PC and try launching the HP Solution Center again.
    If the issue persists, insert the printer installation disk.
    Open Computer, right click the CD Driver and select Browse.
    Enter the Setup Folder.
    Enter the SolutionCenter folder.
    Right click SolutionCenter.msi (May be identified by its different icon) and select Repair.
    Confirm any prompt or alert, reboot the PC if prompted to and check for any change,
    If the problem still persists, please let me know what error you may get while trying to open the HP Solution Center,
    Regards,
    Shlomi
    http://get.adobe.com/flashplayer
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Problem getting HP Officejet J4680 to show up in Solution Center

    I changed my router to a Netgear WNR2000 v3, and now I can't get my HP Officejet J4680 to show up in Solution Center.  I can print to it, but I now have no way of scanning to files.  I've tried uninstalling/reinstalling both software and the printer, but I still can't get it to show up.  I've also reset the printer to factory defaults and changed the IP address as suggested.
    I also discovered that Document Manager won't open.
    Please help.

    It is an iTunes problem
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests

  • Lenovo Solution Center Hardwarescan meldet Drahtlos Problem beim lokalen Verbindungstest

    Hallo,
    nach einem Hardwarescan meldet Lenovo Solution Center ein Problem unter der Rubrik "Drahtlos". Offensichtlich besteht ein Problem beim lokalen Verbindungstest. Der Ergebniscode lautet "WWF00F000-UJ7Y2E". Habe bisher keine Probleme mit der Netzwerkverbindung bemerkt. Worauf deutet dieser Fehler hin?
    Gruß schlueterdi

    Hallo schlueterdi,
    vielen Dank für die Nachricht und "willkommen" im LENOVO-Forum.
    Ich werde mal eine Anfrage an unsere Entwickler/Labor schicken.
    Sobald ich eine Rückmeldung erhalte, werde ich mich hier melden.
    Danke und Gruß, Marcel
    → Wenn Du eine Lösung auf Deine Frage erhalten hast, markiere diese bitte als gelöst - Hilfreiche Beiträge verdienen Kudos. Zögere nicht Kudos zu vergeben.   

  • Lenovo Solution Center install problem - Error 1721

    Hello, I'm trying to install Lenovo Solution Center to my computer again, after not properly uninstalling it. I simply deleted the files and repaired the registry thinking that it would be fine, and it is not.
    I'm getting the Error 1721 upon installing, installer tries to execute 'KillProcessLSC.exe' under Lenovo Solution Center folder and it cannot, since I deleted them. I need the files under Lenovo Solution Center folder so I can make the installer pass the 'Killing LSC' step, or at least think it passed.
    I got the idea to fixing it from this post. The guy restored the files from Recycle Bin and installer worked just fine. Since I already cleared my Recycle Bin and I did this over a year ago I cannot get the files from recycling. I simply need the files so I can make the installer execute the program it wants and passes that step that I get stuck on. If any other solution is available I'm free to try it, otherwise I'm pretty much sure putting the files in the Lenovo Solution Center folder will fix it. Thanks.

    @bl8demast3r,
    Your post 1 stated:
    Whenever I try to run the hardware scan I get the error:
    "Lenovo Solution Center service is not available. Please restart the application, or reboot your computer if the problem persists."
    Your later post mentioned Scheduled scan, I assume LSC hardware scan.
    ===
    Lsc during the last year has had issues where LSC software fails during a  manual run of hardware scan. Symptoms include Lsc service not available. You have the latest version of LSC.  Monitor what you see and post back if the "service not available"  screen shows up. Describe if this hardware scan was done manualy or a result of the scheduled monhtly run. 

  • Problem with Lenovo Solution Center for Windows 8.1

    Hi,
    I reinstalled my Laptop. I wanted to install the Lenovo Solution Center for Windows 8.1 (64 bit).
    (I installed it with the necessary administrator priviledges.)
    But it didn't work. 
    I am getting the following error message. 
    Can anyone help me with this problem. Thanks in advance.
    Best regards,
    Jens.

    This one?
    http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-73784
    Cheers.
    If I helped you, please give me some kudos! ^^

  • Windows 8 - Lenovo Solution Center claiming problem wih disabled printer (but it's not disabled)

    I have an HP printer for which I needed to replace the stock Windows 8 printer driver with HP's full featured driver.  Since I did that, Lenovo Solution Center [LSC] complains (under Check-up> Device Manager) that "one or more devices have problems" and it lists my Officejet 4500 G510n-z as "disabled".  When I go to device manager to check the status of my printers, I see a print queue category of devices, and all of them, including the two associated with the printer, are enabled and "working properly".
    Under what circumstances does Solution Center determine that a device is disabled?  How do I convince Solution center it is making the wrong assessment ;-)....or perhaps there is something wrong but looking at Device Manager doesn't tell me so???  Is there another place I should check?
    I finally solved the wan miniport problem (thanks to other posters), so now I have 1 problem left to fight to be able to rid myself of unwarranted exclamation marks from LSC.

    I have same problem after completely installing the HP full solution driver and application support for the printer. It's the "Multifunction Adapter" category in Device Manager that causes LSC to show the error. I already have a Z: Sendto device that corresponds to the SD Card for the printer, but have nothing inserted. If I attempt to Update Driver for the multi-function adapter, it's not finding driver on Internet (Windows Update) and not finding a signed driver for Windows 8 under Update Driver, Printer driver support if you choose the locate on c: drive and point to the correct HP printer. Interesting also, I have three "discovered" HP printers, all showing "Disabled" Multi-Function adapters under Device Manager by LSC.

  • Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

    Hi folks,
    I've searched many threads and found some directions to remedy this, tried them and have had no luck.
    I'm running Windows 7.  All updates are current.  When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine.  Fast forward a year and Solution Center stopped working.
    Uninstalled all HP software to reinstall.  I was only able to reinstall HP Update.  I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center.  The installation stops abruptly after "installing updates".
    I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
    What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
    Thanks,
    Alex
    This question was solved.
    View Solution.

    Hi jerseyal,
    I hate to hear you are having issues.  What suggestions have you tried?  Did you get an error when installing?  How are you connecting the device?  Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
    If you are still experiencing the issue the steps below may help resolve it. 
    Try using the scrubber built into the software, then reinstalling from the current download available on the website. 
    From original printer installation CD:
    1. Insert CD into drive, and then cancel the installer
    2. Open My Computer, and then right click on the CD drive and chose open
    3. Open folder Util
    4. Open folder CCC
    5. Run the uninstall_ L4.bat for non-HP computers only.    For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Use the following tool to clean the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    10. Download the full feature software and drivers Driver Link
    11. Run the download to reinstall the printer
    From a download:
    1. Run disk cleanup on your computer
    2. Download and run the software and drivers below.
    3. Once the download is done extracting, cancel the download. Driver Link
    4.. Press the Windows key + R on the keyboard to bring up the run menu.
    5. Type %temp% in the run field and click OK.
    6. Look for, and open the folder starting with 7z (Example: 7zS2356)
    7. Open folder Util
    8. Open folder CCC
    9. Run the uninstall_ L4.bat for non-HP computers only.    For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
    10. When the uninstall has completed restart the computer
    11. Run Disk cleanup from Accessories\ System Tools
    12. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    13. Use the following tool to clean the system and registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    14. Download the full feature software and drivers Driver link
    15. Run the download to reinstall the printer
    Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

Maybe you are looking for

  • Please Help! Problems with Windows Vista 32-bit on Boot Camp (Wireless/Etc)

    We recently purchased a new aluminum Mac Book (13 inch) with Leopard (10.5.4). I attempted to install Boot Camp and Windows Vista 32-bit. I can successfully alternate between both operating systems with no problems. However, I am having 2 problems: 1

  • Getting the name of the column using MDM API

    Hi I want to know the Column name from fieldId, can any one help me on this. I am using the following code to get the data but i nedd column name to which the data is refering ArrayList mdmData=new ArrayList(); RecordResultSet rs=(RecordResultSet)obj

  • Airfoil problem

    I have just purchased Airfoil to stream audio to my external speakers and I can't get it to work properly with my iMac 2.4 Ghz Core 2 Duo as it constantly breaks up/drops out. However, I've installed it on my MacBook and it appears to work perfectly

  • Service tax on GTA

    How to reconcile the service tax on GTA liable expenses. so, how to maintain it in system??? I want information/ suggestions for standard and Z development both.... waiting..... Regards, Sachin

  • Webservices ? XML-RPC

    Hi I have seen apex have some webservices support, I have a application there have a API based on XML-RPC, could I "talk" to this application using apex webservices? Best Regards Jesper Vels