Solution deletion in solman 7.1

Dear Expert,
I want to delete few old solutions from solman 7.1, but i am not able to deactivate the solutions ,because there is no "Solution Manager Administration"
tab in my solman system.Please advice.
Thanks
Chander Dubey

Dear Chander,
You should to have SAP_SMWORK_SM_ADMIN role assigned for SAP Solution Manager Administration workcenter.
With best regards,
Alexander

Similar Messages

Can incidents be deleted in SolMan 7.1?

I inadvertently had auto-incidents turned on so now I have over 5,000 incidents in my system and it makes things very slow. I would like to delete these incidents. Is there a way to do this without configuring archiving (if you can even do that)? I looked around but can't find any notes. Thank you,
David

Hi Mateus,
Note 566225 "Report to delete the basis notifications with deletion flag" I think is for half the process in note 1329247 "Archiving Solution Manager Service Desk messages". I really don't want to start configuring archiving, which will doubtless involve applying notes, mucho documentation and a lot of work (I have so many other issues before I can spend time on that). Also, it seems like this is for SolMan 7.0. Aren't the SLFN and all that different in 7.1. It doesn't look like there is a way to just delete them, sigh. Well thanks Mateus,
David

Error in solution monitoring in solman

Hi all,
I am configuring solution monitoring in Solution manager i have created RFC connections and CCMS conectivity in T-Code DSWP but in option Copy Custmoizing i am not able to get the Destination system details pls helpme.
Omkar
Regards,

Hi Omar,
Can you proviede more details on what you are doing and on what are willing to get?
Regards,
Valdecir

Using Solution Database (IS01) in SolMan without TREX

Hi all,
I just wanted to use the solution database within SolMan, which comes with the standard CRM functionality (IS01). Unfortunately I always receive dumps when creating (SAPSQL_ARRAY_INSERT_DUPREC) and searching (OBJECTS_OBJREF_NOT_ASSIGNED_NO) for problems and solutions.
Afterwards I found that the installation of the TREX server is required and this is maybe the reason. Is this true?
How can I run the solution database without the installation of a TREX? Is this possible?
Please help.
Thank you very much in advance, and have a nice weekend.
Stefan Bauert

Hello Charan,
Thank you very much for your feedback!
I went through the wizard of TCode "CRMC_SAF_WZ_SE" and entered requested program, but I was leaving detailed data for http and so on blank.
After that I went to TCode "CRMC_SAF_ADV_CLIENT" and wanted to enter the recommended description to "Learning Enginge Description". The following 2 entries already exist:
DEFAULT_ASPR Spreading Activation
DEFAULT_PURE Pure Correlation
Do I need to enter a new entry, or just paste the program name into one of these entries?
However the creation of a problem is still failing with dump OBJECTS_OBJREF_NOT_ASSIGNED.
Finally my question: If I do not want to use the service desk for this, can I use the solution DB without TREX?
thanks and regards
stefan

Creation of Ibase for satellite systems in Solution Manager 4.0 SP13

Hello!
Can enybody help?
We are trying to creat Ibase for Satellite systems in solution landscape in SolMan system, using the automatic generation(TA SOLUTION_MANAGER) for specific solution.
After successfully generation we have only one iBase for one solman system only, but there are some systems in solution.
Does anyone know how to generate iBase for all systems in solution?

Hi,
There will be only one iBase for a solution.
Goto tcode IB52 and check. You will find all the systems assigned to your solution appear there.
regards,
Ram

SOLMAN 7.1 SP10 CRM UI Service Desk - How to clear / remove Message Processor on a particular status

Hi Experts,
I have a requirement to remove the stated Message Processor, when the incident / Service Desk ticket is being saved using a particular status (Eg: Sent to Level 1).
Appreciate if someone can guide me how this can be done (whether using simple PPF (tcode SPPFCADM) or we are forced to use BFR+
Thanks in advance
Regards
Shahul

The solution is here
SOLMAN 7.1 CRM UI - "Reported By" Empty
Thanks to Ash.

Can't delete tracks from iCloud

I'm trying to delete tracks from my iCloud instance.
In iTunes, I delete from my library all of the tracks that I want removed from iCloud. A pop-up dialogue asks if I would like to remove these tracks from iCloud as well. I select the checkbox to indicate yes I do want. The tracks are then visibly removed from my local iTunes library. The next time iTunes Match runs, however, these tracks are re-populated in my iTunes library, as being matched in iCloud.
Obviously I am missing some nuanced step in this process. Any hints?
If it helps, I'd be perfectly happy to have my entire iCloud library deleted, and start fresh.
Note: I am not deleting the files themselve from the filesystem, just trying to remove their entry in my iTunes library.

Solved.
My problem is a duplicate of https://discussions.apple.com/message/16988521#16988521
Solution: delete tracks in groups <900, and be patient.

Since upgrading to FF6 and now through FF7 web pages need repeated refreshing to load this does not happen with other browsers. I have tried many solutions. None have worked. Any ideas?

Problem began after a Firefox 6 update (i do not remember which one) and has continued through current use of Firefox 7.0.1. Almost all '''web pages load only through repeated refreshing'''. If I do not refresh the web page it will just continue to try to load (as seen by the green rotating ring continually revolving) in a new window with a new tab (as I have set it to do). Nothing stops, nothing crashes. Once the web page completes and opens (after the refreshings) I can close the window click on the bookmark icon or originating link and the web page will load and open quickly (as it should). I have searched for solutions on the Mozilla site and have done many of the possible solutions (deleting history and caches, etc.) Problem seems to be communication in origin (my FF browser talking to web page server). I do not use a proxy. My set up to the internet is: laptop thru Verizon USB modem to internet. Operates as a wireless dial-up with speeds averaging 55 kbs (fast enough for me). I have used this set up for years with no previous trouble. Anyone have similar trouble, ideas or solutions?

Thanks for your reply cor-el. I had never heard of nor seen the pref network.http.max-connections until I read about it in some of the replies in this support forum. People were saying 256 was the old setting and a new setting of 48 would correct my problem. When I followed the instructions to get to - see - and change the setting I discovered that my network.http.max-connections was already set to 48. I never did this. The only way I can think of that this setting was changed is that it happened by an automatic update to my Firefox browser. So, the problem I have was probably happening while this setting was at 48 all along. It is still set at 48 and I am still having the same problem. I will try as you suggest and set it to 30 and see what happens. I'll let you know the results. That's again for your response.

Solution Documentation: Define WMB and ATG in solution Manager

Hello,
I am working on solution docuemtnation. and looking for some help to define the NOn SAP system like WMB or ATG in solution manager landscape defination.
Solution Manager version is 7.1
Regards,
BA

Hi Bhavesh
This is a good question to me as I have no knowledge about IBM Websphere at all.
But at my opinion, you will need an "Websphere Appserver by IBM" (nothing else than IBM Websphere) to run the IBM Websphere Message Broker on. And therefore, you should go on assigning your Message Broker as product instance of the "Websphere Appserver by IBM".
If the IBM Websphere Message Broker is not a product part of Websphere (App)server, you should create a new product. Secondarly, if the version of your Websphere Message Broker differs from the ones provided by SAP (right pane "Productversion"), you will also need to create your own product, as they are not changeable if provided by SAP.
A third point to think about is, that if you would like to point out, that there is a real difference between the IBM Websphere Message Broker and (perhabs separatly installed) IBM Websphere Appserver, you should create your own product.
Last, but not less important: If you use the "Technical System Monitoring" of Solution Manager (see Solman Setup), you shoudl check, if there is are any templates for checking an Websphere Appserver provided by SAP. If so, you will need to assign your Message Broker as "Websphere Appserver" in order to use this monitoring template.
Best regards,
Michael

Support Desk Message Creation in SOLUTION MANAGER through External Emails

Hello Experts,
                    I am a ABAP Developer , as mentioned in subject, my part is to Create support desk message in solution manager,through external Emails like outlook Express . To do this task i am in need of more information about some componenets which are used in solution manager support desk Message.
      My Doubts are,
1) What is the use of Ibasecomponent in Message Creation?
2) What if the ibasecomponent is mentioned as a defaut value ' 24 ' ( i.e is the ibasecomponent for solution manager - support desk ) ?
3) To track the system from which the message is created , is ibase required or the SAP component will give those information?
     If anyone has already worked with this subject, please give me some suggestions ASAP.
Thanks in Advance,
Mohana

Hello Mohana,
Let see if I can explain this well:
1) What is the use of Ibasecomponent in Message Creation?
When you define a Solution in the SOLMAN, you need to update your Ibase
Edit->Initial Data transfer for Ibase
This create a tree structure in the ibase IB52, as you can see in the attachment.
You get a componet number for SID-Client
You can configure the SOLMAN in a way that when a message arrives from
<System ID> <Installation Number> <Client> <User Name>
this is what solman knows from a message comming from a satellite, them you
know directly from which component/ibase the message has been received.
This is important data, the component/ibase, for reporting issue, for assigning this component to a sold-to-party (being in IB52, left tree, select a system and go to Goto->Partner you can assign a Sold-to party BP there for example)
2) What if the ibasecomponent is mentioned as a defaut value ' 24 '
By default the SOLMAN system has a Intalled base 01 already created for being used and maintained "automatically":
being in dswp, solution : Edit->Initial Data transfer for Ibase
If not you msut maintain the ibase manually from IB52, this is also possible.
The Ibase 01 is a prconfigured iBase for being used for the SOLMAN application.
Tink that the SOLMAN system is built up a CRM system, so the IBase is CRM matter. SOLMAN is only using some CRM applications to build the Service Desk scenario for example.
I3) To track the system from which the message is created , is ibase required or the SAP component will give those information?
Ibase is required
Hope this helps,
Dolores

Solution manager system monitoring configuration

Hi
I am configuring system monitoring in solution manager (Oracle / Solman 7.0 EHP1 / Windows 2008 / VM)
I have added a satellite system to solution manager thru CCMS and CCMSPING agents. These are visible in RZ21 / Technical infrastructure / Overview. This has also been added in SMSY, SMSY when refreshed pulls out data from the satellite system. However I am having trouble with the transaction SOLUTION_MANAGER. This is where I setup system monitoring.
Here I find the solution maanger system however am not able to find the satellite system which I had added.
Thoughts?
thanks
Ravi

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

Solution Manager 4.0 CRM 5.0 (TREX)

Dear SDN
This is my first time using SDN and I would like to ask you for help, please. This is urgent!
We have Solution Manager 4.0 CRM 5.0
We would like to setup the Solution Database function in CRM Software Agent Framework. What version of TREX can we use to make full use of Solution Database SAF. Can we use TREX 6.1 or TREX 7.0 or is both versions compatible. We also look for an installation guide on Software Agent Framework CRM 5.0. We have an installation guide for CRM 4.0 SP6.But this refer to older components.
Thanks your help will be greatly Appreciated
Allistair Mcguire
[email protected]

hi
Thanks for the reply
I have setup TREX 6.1
Next problem, im trying to setup the solution database in SOLMAN 4.o
but when i go to trans IS01 and try to create an Solution for the database i get an Dump OBJECTS_OBJREF_NOT_ASSIGNED.
please advise as to how to resolve this dump.
Thanks
Allistair McGuire

Error While Loggin in Solution Manager 3.2

Hello there!!
I have HP-UX, Oracle 9i,Sol MAn 3.2
I have installed Sol Man3.2 on my Dev Server under instance SM1 and system number 00
now when i add this system on my SAP Logon
and click on the logon button
i get error as connection refused.
details error is mentioned below.
I have started the Instance SM1 and it is showing instance started.
Component:NI
Release:640
Version:37
Module: nixxi_r.cpp
Line:8716
Method: NiPConnect2
return Code -10
System Call: SiPeekPendConn
Error No 10061
Error text WSAECONNREFUSED: Connection refused
kindly help
saurabh

Hi Saurabh,
sorry, I am not able to support you in finding the cause for the connection problem.
Anyway, my recommendation:
- Delete the SolMan 3.2 installation
- Install Solman 4.0
- Apply all Support Packages
- perform the configuration on 4.0 according the IMG
Configuring SolMan 3.2 is wasted time, if it has not been used in the past. SolMan 4.0 supports implementation / upgrade from/to SAP ERP 2004.
An upgrade in the future costs much more time and money, then to reinstall 4.0 now.
Deleting SolMan 3.2 and reinstall SolMan 4.0, this will only 2 extra days. Upgrade takes about 4-10 days.
Best regards,
Ruediger Stoecker
Message was edited by: Ruediger Stoecker
Spelling mistakes corrected, more information on days.

"Display Unavailable" red canvas screen-forum solutions not working. URGENT

I a few days ago I started getting, in the midst of editing, my canvas going red with the message "Display Unavalible" in it. After this, the sequence would not play. If I close the sequence and try to reopen it, I get an error window which just says "error:out of memory". I found this problem on the board and tried three solutions: deleting all of my render files in render manager (didn't work); trashing FCP preferences (didn't work); checking for any CMYK stills in the timeline (there were none, but there were greyscale clips, I removed them, still didn't work ); and making the sequence offline, then reconnecting all clips and re-rendering (that worked, then it happened again after working a while).
I am in a very tight deadline situation for the screening of this film and must find a solution to this problem! Other sequences in the same project appear to play okay. It seems to be this sequence only. I have done a few things differently in this sequence than I have in others. Maybe they could provide some clues as to what might be causing the problem.
1. I upgraded Magic Bullet for Editors and have applied several effects (problem started after installing MB, for what it's worth).
2. I am also using Natress filters (including frame rate conversion/deinterlacing) on top of Magic bullet filters.
3. I have dv source footage which I have enlarged up to 300%, sometimes with filters applied to those clips (yes I know this is highly unorthodox but this is a punk rock movie and I am experimenting).
The last thing that I did was remove frame rate conversion from all Natress effected clips that also had Magic Bullet Filters on them, reduced all clips to 100%. Then when I when to reconnected the clips the **** thing did it again.
Is there anyone out there who can help with this? I can pay for extra assistance if necessary!
Thanks so much,
Patrick

Thank you for that, I also found this article, silently hoping that this was not the case. On one hand this is good news, as I can get it repaired for free, while on the other I now need to find a way to back up my data without my screen.
As a side note the computer screen did light up last night, on a random restart. However, it once again will not turn on, and I may have lost my chance to back up my data. The symptoms fit a burned out video card, so I guess my next step is heading on over to the apple store.
Thanks again for the article, I'll be printing it off and bringing a copy with me.

Solution to iPhoto spinning beach ball for Book projects with too many unplaced photos

A few days ago I discovered the solution to this problem for a client using iPhoto 9.5.1 in OS X Mavericks 10.9.4.
=====
TRIED ALL KNOWN SUGGESTIONS BUT NONE HELPED
My client had already tried repairing, rebuilding etc. the iPhoto Library, and I tried OS X's Disk Verify and Repair Permissions plus emptied the cache folder in system Library and in the hidden user Library folder (option-key "Go" menu, Library). None of this helped.
CLUE TO PROBLEM
I noticed several of her iPhoto Book projects each had thousands of "unplaced" photos. In each of those cases, each Book project only had 10-50 "placed" photos used to order the book but thousands of "unplaced" photos. In a Book project, clicking on the bottom-right corner's "Photo" icon-button caused an extremely long lasting spinning beach ball making iPhoto unusable for long periods.
I discovered the problem by clicking once on an existing Book project's name in the left column of iPhoto, then letting go of the mouse with its arrow cursor hovering over the selected Book project name. Within 1-7 seconds, a little pop-up appears listing the total number of photos (placed + unplaced) in that Book project. For many Book projects, the total number was just several more photos than the number of "placed" photos, e.g., a Book with 25 photos showed "(37)" in the pop-up info by the hovering stationary mouse, meaning 37 total photos (placed + unplaced) are associated with that Book project.
BUT...
...some projects listed over 5,000 (five thousand) photos associated with a single Book project that had only placed 20-40 photos in the final printed book. One Book project had 6,070 and several other small book projects showed over 1,000 photos. In each Book project with a mass of unplaced photos, clicking the bottom-right "Photo" icon-button caused a very long-lasting spinning beach ball, almost certainly because iPhoto struggled to build a huge list of thumbnails for the mass of unplaced photos.
My client didn't understand how to efficiently add photos to a new Book project and was clicking on the pull-down menu in the right column that appears after clicking the Photo icon-button within the Book project. From the menu she chose "Last import..." or other menu choice that added a mass of "unplaced" photos to the Book project.
She didn't realize that after creating a new Book project, she could simply drag an individual photo or multi-selected group of photos or an event or "faces" group from its respective library section and drop it onto the Book project's name in the left column, thereby adding only a small group of "unplaced" photos.
USER SOLUTIONS
=====Delete mass of "unplaced photos" within a Book project
This works best for cleaning up smaller number of unplaced photos from completed Book projects.
Problems with solution:
- if the number of unplaced photos is huge, e.g., 6,070, the list of unplaced photos won't appear for a long, long time if ever.
- even if the list of unplaced photos finally appears, there's no way to select more than one thumbnail at a time, i.e., command-a for Select All doesn't work, nor do shift-clicks and command-clicks for multi-item selecting. You must click one photo then tap the "delete" key on your keyboard repeatedly and fast for this to be practical (note: delete key presses are cached here (meaning accumulated until it catches up processing them later); tapping the delete key like mad then waiting for iPhoto to catch up takes lots of patience.
====Delete an entire existing Book project containing a mass association of unplaced photos
This is practical if you've already printed your Book project and no longer need it. My client chose this method for Book projects with a mega mass of unplaced photos.
Problem with solution:
- for incomplete Book projects in progress with a mass of unplaced photos, you'd have to start over after deleting the whole thing.
NEED FOR IMPROVED IPHOTO FEATURE(S)
(1) The existing "Clear Placed Photos" button within a Book project might be useful, but it'd be even better to also have a button to "Clear Unplaced Photos,” and this button should be available outside of the section that struggles to display thumbnails of large numbers of unplaced photos. Clicking "Clear Unplaced Photos" would do the trick.
(2) An additional iPhoto behavior might help: iPhoto should warn with an option to cancel when adding a mass of photos to the "unplaced photo" section if the number of photos exceeds ??? (400??).
(3) Add another choice to iPhoto’s special startup Administrative window (Repair, Rebuild, etc.): "Remove unplaced photos from existing projects. (Doesn't destroy any photos in Library)"
Whew!

Like I mentioned in the post, corruption was probably ruled out by running all the Admin features at iPhoto startup (e.g., Rebuild, etc.). I also stated in my post that I also ran a Disk Verify and Repaired Permissions in OSX (via Disk Utility). I also emptied system Library cache files as I stated in my post.
I was paid to figure out the solution and am not getting paid to troubleshoot for Apple. The more unplaced photos there are in a Book project, the longer it takes to build thumbnails. It's an old general problem in computing when building lists on the fly.
The delay happened for all Book projects with lots of unplaced photos (almost*** certainly more than Apple imagined a user would use), and the beach ball delay was proportional to the number unplaced photos, which super large numbers of photos.
I very much doubt photos are corrupt. But Apple will probably figure it out. It was EASILY reproducible. Try it with different number of unplaced photos known not be corrupt (they display fine elsewhere and iPhoto's and Disk Utlity's admin Verify, Repair etc features show no problems).
I'm done with this.
My client's iPhoto works well now and she knows how avoid placing exorbitant numbers of unplaced photos into her project. I'm not getting paid to answer all this, so good night.
=======
***"Science is the outcome of being prepared to live without certainty and therefore a mark of maturity. It embraces doubt and loose ends."
— A. C. Grayling

Solution deletion in solman 7.1

Similar Messages

Maybe you are looking for