Solution Directory -- Create System for Solution Monitoring

Hi Experts,
I created an ERP solution in SolMan but I don´t know how to create systems DEV, QAS and PRD as graphics for process monitoring.
I allready configured in SMSY the systems, RFCs and logical component.
Regards.

Hi,
I would suggest to go through http://service.sap.com/rkt-solman for your Solution Manager release.
It provide complete details regarding benefits and configuring solution manager services including Solutin Monitoring as well.
Hope it helps.
Regards,
Srikishan

Similar Messages

  • ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS

    Dear all,
    Hi,
    I am configuring solution manager 7.0.
    In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
    program WEBADMIN not registerred.
    can any one tell me how to register this program in sap gateway.
    best regards
    azeem

    Hi Azeem,
    Just before creating the rfc connection do this step.
    Set-Up Solution Manager Connection to Solution Manager Diagn
    Use
    Check the connection to function Solution Manager Diagnostics.
    Default Settings
    The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
    Activities
    If the default values are correct, save the settings.
    To run the Solution Manager Diagnostics in another system, enter the required data and save.
    Also check that your java is active.
    Regards
    Ashok

  • Create Analytics for solutions and create audit for rating to solutions

    Hi All,
    I want to create Analytics for solutions, but I can't find any thing related to solutions in Analytics configuration.
    And I also want to create audit for rating to solutions including rating by, rating date, score etc.
    Any suggestions are appreciated!
    Edited by: Bruce007 on Jun 14, 2009 11:44 PM

    Hi, there is no subject are available for Solutions in OnDemand. There are no field auditing facilities available too. You may have to think about a Webservices based solution
    -- Venky CRMIT

  • Is it feasible to create odataservice for Solution manager using UI5 technology?

    Hi Experts,
    Is it possible to create new odata service for solution manager, such as Viewing BPML(Business process master list).
    If yes, kindly share the steps/way to achieve.
    Regards,
    Asmita Ranade

    Julie,
    same answer here which you already got in the two threads you opened on the MOS communities: No, not really since you want to do it in Answers. It *would* be possible in the RPD, but quite pointless to instantiate an RPD variable just to instantiate some literal code.

  • How we create system for Bex query

    Hi
    I want to access Bex query in VC , I think we can do this by creating system in poratl. pls tell me how we  create system in prtal for this.
    Regards
    Amit

    Hi Naresh,
    Pls send the Document for me also.
    This is my mail id: [email protected]
    Thanks & Regards
    Prakash T

  • Information needed on having one more CEN system for the monitored systems

    Hi Everyone,
    I need some information regarding configuring of one more CEN system
    system for the systems which are already being monitored by another
    central system.
    1) Do I need to register a new CCMS agent on the monitored system for the NEW CEN system again. As I already have sapccm4x registered in the monitored system for the old CEN system, which i think can't be used for the new CEN system.
    If I can go with configuring NEW CEN system for the same monitored systems, can you tell me how should I proceed.
    Can anyone help me by providing the information for this issue.
    Regards,
    Bharath Kumar.K

    1) yes you can use DSL with what you have, but you want more RAM and I would recommend getting OSX.3 or above because the web browsers for OS9, which I assume is what you are running, are a bit dated and not well supported any longer.
    2) Yes you can add more RAM. The 64meg stick in there can be removed. You can add up to 1 Gig of RAM via two 512Mb PC100 or PC133 DIMMS.
    See here: http://tinyurl.com/qdlo3
    I would add at least 512 Mb if you use OSX and no less than 256 mb if you are using OS9
    3) No you can not use CD-R or CDRW with the hardware you have. That iMac only has a CDRom drive and can not burn CDs. You can buy an external CD burner if you want to back up to CDRs
    PS: You may want to remove your serial number from your post. Granted the warranty has expired but there's no need or reason to list it.

  • Discovery System for Solution Manager

    I'm looking for an SAP system I can install or access that has the latest Solution Manager code, with sufficent data so that I can perform practical training exercises.  Unfortunately, there's little scope for experimenting with these systems due to the possible impact on production systems and projects, so I don't want to "play" with any of my customers systems except as a last resort.
    I'm open to paying for acces, subject to cost and suitability.
    PS  If that last line (about paid access) contravenes SDN policy,  I have no problem wit hsomeone deleting the post and advising me to repost the thread without reference to cmomercial   considerations

    Hi Sudeep,
    As per the Quick guide for V3, to login to Solman Client 001, the user /pw - : sap*/admin123
    Since the sap* is locked, login with admin/admin in client 001 and unlock the required user account.
    R,
    Chaitra

  • Is there a simpler solution/directory/file structure for banner ads?

    I also have to wonder what a pain this has to be for a large website with many rotating banner ads - having all of these same files copied over and over in separate subdirectories. Flash had 2 files - a html file and swf file stored in the same directory. Am I missing something?
    the banner name - with config.xml - created by Dreamweaver
    Assets -  4 or 5 files, not counting json or sound files
    edge_includes  - and its 2 files
    images - at least they are unique
    And I, maybe wrongly, create a html file in Dreamweaver with the oam file inserted in it. 
    Bob

    From the Edge Animate JavaScript 2.0 API Docs:
    CDN Hosting
    Using the Adobe Content Distribution Network (CDN) is a great way to speed up Animate composition delivery. Compositions using the Adobe CDN all share a single URL for jQuery and the Edge Runtime. The browser caches the runtime, so the user only downloads the library once no matter how may Animate compositions they view, even if compositions are on different sites and produced by different authors.
    Don't use the CDN if your composition needs to run without an Internet connection or if you want to use your own hosting exclusively.
    The Edge Runtime CDN uses the following URL:
    <script type="text/javascript" charset="utf-8"    src="http://download.adobe.com/pub/adobe/edge/animate/2.0.0/edge.2.0.0.min.js"></script>
    So now I know what that CDN option is about.
    Bob

  • Create subscription for overrided monitor

    Hello guys. Have an issue:
    I've created a new monitor for all Servers(Windows Server Operation System Target), set it to disabled. Then I override it to specific group with other thresholds. Alerts are going well, but e-mail do not go. Trying to create subscription from scratch, select
    my monitor (which is disabled) - still mail doesn't come. Questions are:
    1. If I make a subscription from alert, will this subscription apply to all server's group, to which I overrided monitor, or only server from which I created alert?
    2. Can I make a subscription from scratch to this alerts (need to change description, but cannot go to next line if creating from alert)
    3. How can I make a e-mail separation, depending on server group? I.e. I want alerts, generated by overrided monitor specifically for BizTalk servers group to send to BizTalk admins e-mail etc. As I understand, I need to add to subscription criteria "raised
    by any instance of specific group"?

    Hi,
    1) As your Monitor is disabled for all Servers by default and you only enabled for the Servers where you need it the subscription will apply to all Servers where Monitor is enabled.
    2) Yes you can create the subscription from scratch
    3) You have to create a Subscriper for each group and configure it in the subscription. If the same Monitor is running for different Server groups with different responsible departments you have to create a subscription for each department and configure
    the "raised by any instance in a specific group" Condition.
    Cheers
    Christoph Maresch | My blogs: blog.cmaresch.at | XING:
    Christoph Maresch
    | Linkedin:
    Christoph Maresch

  • Solution Directory----Merging two projects in Solution

    Dear Team,
       I am working in Sol Man 4.0 SP 13.
    we have created two projects in Sol Man & we have done our entire implementation thro Sol Man. Now the two projects are gone live.
    Now we want to maintain "Solution Directory" merging these two projects.
    Please guide me, what are all the primary inputs i have to collect from the customer in order to start this activity?
    Note: I believe, based on the "Solution Directory" only our Business Process Monitoring works. Is it correct?
    any valuable input will be very much appreciated
    Thanks
    Senthil

    Whilst my instructions are lengthy, that is to give a full explanation of all the ins and outs. In your case the work will be little more than creating a parent and setting up your two existing projects as children.
    It's a lot easier than trying to have one source project.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Solution Directory reports

    We are defining business process in Solution Directory creating associations between process steps and logical components. For future process analyses we need to know for a specific logical component where it is utilized. There are some reports in SOLMAN to cover this requirement?
    Regards

    Hello Sebastian,
    Its not a report as such, but for any logical component there will be the where used icon (CTRLSHIFTF3) which looks like a box with 3 arrows pointing N/E, E and S/E. Anywhere there is a logocal component this icon exists, though you may need to be in changed/edit mode to acess it.
    As I say it is not a report, but will tell where any single logical is used - what projects, solutions, etc.
    Is this useful for your needs?
    Regards,
    Paul

  • Solution Directory Graphic Displays as XML

    We are runing Solution Manager 4.0.
    If I perform the following actions...
    - Run transaction SOLUTION_MANAGER.
    - Select "Goto Solution Directory" (pencil icon) for a solution.
    - Expand the solution structure by clicking on the solution name.
    - Select the Systems sub-item or the Servers sub-item.
    Instead of seeing any graphics in the Graphic tab, I see XML tags.  The XML is formatted using Internet Explorer's default appearance.
    Any idea what could be causing this?  I downloaded and installed the latest version of Microsoft XML (MSXML 6.0), but this didn't change anything.

    Hi Steve,
    Can you help us how to change this default name mapping.... we too are in a similar problem...where the graphics display is in XML code.
    The error shows : URL http://blrkecsolman.XXXXXX.com:8001/sap/bc/solman/defaultUser/graphic/solmangraphic.htm call was terminated because the corresponding service is not available.
    Thanks for your help.
    Br,
    Sri

  • Solution Manager's system landscape

    Guys,
    I have one very basic question.
    I believe I read somewhere that we need at least two systems for Solution Manager, DEV environment and PRD environment. Is this correct? If so, how do we transport the SMSY and Solution definitions from DEV to PRD?
    If there is some kind of good explanatory documents, would you please give me the link to them?
    Thank you in advance.
    rgds,
    Yoshi

    Hi, Srini,
    Thanks for your post.
    Yes I knew we only need one solman to manage DEV, QA, and PRD sattelite systems. What I want is some kind of official document from SAP that states "only one system is required, additional sandbox is just recommended."
    rgds,
    Yoshi

  • "manage nuget packages for solution" is missing in the drop down for NuGet Package Manager

    Hi,
    I have VS2013 Ultimate on windows 7 PC and that Nuget Option does show in the dropdown.  Today, I setup a vm in Azure, from image I select VS2013 Ultimate, just like the one on my PC.  However, when I click on the Tools, Nuget, there is only 2
    drop down option, "package manager console" and "package manager settings" are the only 2 available.  How can I get the ""manage nuget packages for solution"?
    I want to install the xamarin.forms extension and I need this.
    thank you
    Thank you

    Hi laJasmine,
    Based on your issue, generally, I know that there have two ways to see the "manage nuget packages for solution" option after we install the VS2013 Ultimate.
    One way is that it is default that we can see the "manage nuget packages for solution" option by right click this Solution->Manage NuGet Packages for Solution option like the following screen shot.
    Another way is that we can see the "manage nuget packages for solution" option by clicking the Tools->Library Package Manager-> manage nuget packages for solution like the following screen shot.
    So please check if you can get the "manage nuget packages for solution" option from this above two way again.
    If you still could not the "manage nuget packages for solution" option in this VS2013 Ultimate, to check if this issue is related to the VS2013 Ultimate set up file. I suggest you could try to copy this setup file and then install it on other machine
    and then check if you still get the issue.
    If you have any updated message about this issue, please tell me.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Variants for Filesystem monitoring in TechMon

    Hello,
    I am trying to create variant for Filesystem monitoring which satisfy my below requirement.
    On particular single host I have following filesystems:
    /oracle/ABC, /oracle/DEF, /oracle/XYZ - All these /oracle/SID should be monitored.
    /oracle/ABC/sapdata01,02,03 ... 10 - Out of these I want to exclude only specific FS, like /oracle/ABC/sapdata03 and /oracle/XYZ/sapdata05
    I checked document http://wiki.sdn.sap.com/wiki/download/attachments/269157890/Template+Maintenance+-+File+System+Variants.pdf
    Based on it if I create variant as /oracle(/.*)*, every FS starting with /oracle gets monitored.
    There is another example given in document, (?:(?!/oracle(/.*)*)(?!/aris(/.*)*).*)
    The meaning is clear, but I could not adopt this to my requirement where I want to monitor everything starting with /oracle except /oracle/ABC/sapdata03 and /oracle/XYZ/sapdata05.
    Please suggest. It would also be great if someone can help me understanding the meaning of symbols used in above Negative Regular Expression, like ?:/.*
    Thanks in advance.
    Regards,
    Hrishikesh Wagle

    Hello,
    I could find out the solution.
    To monitor everything starting with /oracle excluding every /oracle/SID/sapdata*
    (?:(?!/oracle/(.*)/sapdata(/.*)*)(/oracle(/.*)*))
    To monitor everything starting with /oracle excluding specific sapdata like /oracle/ABC/sapdata03 and /oracle/XYZ/sapdata05
    ((?!/oracle/ABC/sapdata03(/.*)*)(?!/oracle/XYZ/sapdata05(/.*)*)(/oracle(/.*)*))
    Thanks.

Maybe you are looking for