Solution for 32k and 64k error

HI All
We are using VC 7.0 with support pack 14 and we are facing problem 32k and 64k i have already gone through FAQ
Nested iview is not solving our propose
can we go for sp15 ?
this will solve our problem??
is there any document available for sp15 ??
is this is the latest sp?
where i can get the information abt latest suppoprt pack can any one send me some link??

Hi Govindu
thanks for the reply.
we are using sp14 but still in compiler tab i m not getting any flex2 compiler i am getting
1. Flash
2. Xgraph
3. Webdynpro
i am giving u the details of our version
GML Version: 700:14.0027
Client Version: 700:14.1
VcServer Version: 700:14..1
flex version: 700.14.1.1
Portal content version: 700:14.0.1
Portal Connector Version: 700:14.0.1
another thing can u provide me link where i can get the information about the latest sp plz.

Similar Messages

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

I wonder to know what is the enterprise solution for windows and application event log management and analyzer

Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.

Consider MS System Center 2012.
Rgds

I am not able to register my Apple ID for iCloud and the error is "the maximum no of free accounts have been activated on this phone" can any one help me why I need to do

I am not able to register my Apple ID for iCloud and the error is "the maximum no of free accounts have been activated on this phone" can any one help me why I need to do

Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support

Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas

Hello Experts,
Pl advise if we have Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas.?
Any link or material for reading, please let me know.
Background - We are working on the scope to finalise processes for Small And Medium Co's for Downstream business in ECC 6.0.
Also advise how many and what kind of processes are involved related to P2P, Order to Cash and Finance.
Regards
Vinod Chincholkar

Hi Vinod,
i hope you can find the details in this link,
you can download the sloution overview brochure...
http://www.sap.com/industries/oil-gas/small/index.epx.
Best Regards
Satish

Annoture - Metadata Bridging Solution for Aperture and iView

Aperture and iView users:
I just released Annoture, a metadata bridging solution for Aperture and iView MediaPro! With Annoture, you’re just a click away from sharing metadata between these two popular image management and cataloguing applications. Spend more time working with your decisive moments than worrying about double-entry and incomplete metadata!
Annoture lets you transfer annotations from iView MediaPro catalogs to Aperture projects and albums and back. This two-way transfer of IPTC and metadata information means you are not tied to any one application for your image management and workflow needs. Annoture also features a modular interface that can be extended to support additional applications in the future.
http://www.tow.com/software/annoture/
Users of Aperture and iView can download a fully-functional version of Annoture. The unregistered version will occasionally display a reminder to register, and all images processed in Aperture by Annoture will have a custom “Annotated with Annoture!” tag added. You can remove these items with the full version after purchasing and entering your license code.
Enjoy!
-adam

Congratulations on getting this working and available so quickly! I bet many late nights went into this
It's definitely providing some motivation for me to learn more Applescript...

Unbelievable no solution for FMS3 and FLVPlayback???

I've spent the past 2 days scouring Google and dozens (easily over 100) websites
trying to find an answer to something that people do every day!
I am absolutely shocked that this info is not available anywhere online.
A simple FMS3 and AS3 and RTMP and FLVPlayback example....
totaly not simple and not possible to find!!
I try every possible combination:
import fl.video.*;
VideoPlayer.iNCManagerClass = fl.video.NCManagerNative;
myVideo.autoPlay = true;
myVideo.isLive = true;
myVideo.isLive = false;
myVideo.source = "rtmp://localhost/appName/videos/flvName.flv";
myVideo.source = "rtmp://localhost/appName/streams/flvName.flv";
myVideo.source = "rtmp://localhost/appName/streams/videos/flvName.flv";
myVideo.source = "rtmp://localhost/appName/flvName.flv";
none is working!!
i did not find any working simple solution for:
FMS3 and AS3 and RTMP and FLVPlayback
anywere on the web
only for:
FMS3 and AS3 and RTMP and Video and NetStream
if someone could bring "salvation" to this required important issue
i will be so thankfull
cheinan

Janaki L thanks a lot for your replay
i think i know where the problam come from
its from point number 8 in your raplay:
8. Make sure you have a publisher connected to your 'server' using the 'appname'
and streaming a live stream with the name 'streamname'
I thought i do not need a publisher to be connected to my appname in my server.
i thought FLVPlayback is doing the netConnection and start streaming the flv
that are already published and sitting on the server.
Is it not possible for the user that use swf with the FLVPlayback to make a netConnection
by ac3 code or some other wey and the FLVPlayback will use that connection to play the flv for that user
without third party connected publisher?
If not - maybe i can use HTTP to let the FLVPlayback play the flv for the user
but that bring me to other problem:
my localhost is at:
C:\inetpub\wwwroot\
the flv is at:
C:\Program Files (x86)\Adobe\Flash Media Server 3.5\applications\appName\streams\videos\flvName.flv
what will be the http url for the flv?

How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance. Of a sledgehammer, open the device and attempt to recover your files by force!???

How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance in Brasil. Of a sledgehammer, open the device and attempt to recover your files by force!???

Heat up the bottom rubber mat with a hairdryer for 5-10 minutes to loosen the adhesive, then pull the rubber mat away from the bottom metal plate carefully.
Then use a screwdriver to remove the 10-12 screws to open up the case.

Possible solution for -8 and other connection errors

I've been struggling recently to make connections with people, often seeing the -8 error. This happened even with the most simple network setup we could find, with our routers either running with uPnP enabled or disabled, and ports forwarded or not. Often we could connect individually to the Apple test accounts, but not each other.
The fix that worked for me, and also for someone else on these boards, was to look at our network "ports" on the Macs themselves. Not the TCP/UDP ports, but the "ethernet" , "airport", etc.
If you open system preferences, Network, and from the Show: dropdown at the top choose "Network Port Configuration" you will see the hardware network ports on your machine. If you use your machine in multiple environments, such as with a wired Ethernet port, Airport, perhaps a Firewire network too, your Mac may have several IP addresses assigned to itself, even if only one is active. Installing virtualization software such as Parallels adds more ports here, with more IP numbers.
Whilst running iChat in debug mode, and watching outbound connections through Little Snitch, I saw that firstly iChat thought I had multiple IP addresses which it attempted to open uPnP with, and secondly my outbound packets had the private internal IP address of one of the Parallels network ports the person I was trying to communicate with - which would never be delivered.
What we did was disable all the ports in the System Preferences described above, except for the one in use. We then restarted iChat and our video streams opened! I believe that iChat simply gets confused about which IP address to do its uPnP mojo with, and disabling the ones not in use makes it choose the correct one.
If you follow this advice, remember to re-enable the ports you disable when you use want to use them in future.
I'm convinced this is the cause of the problem - even when I use my MacBook behind a commercial locked down Watchguard firewall the video conferencing still works, which suggests that it's not the opening of ports through the firewall that's the issue, at least for some people.
I hope this is useful information for people struggling with -8 errors - let me know how you get on.

Intel macs, since 25 febr.
"watching outbound connections through Little
Snitch"
Interrupted connections under some circumstances
after applying the AirPort Extreme 2007-001 update:
This is (often) soluble by disabling any third-party
wireless signal monitoring or sniffing utilities.
I don't think Little Snitch was causing any problems, for me at least. It did let me see that it was trying to talk to the other machine's non-active IP address, which is what led me to turning off the other network ports.
It's quite informative to see which TCP and UDP ports are being actively used, and where they're going.

Adobe Save for Web and Devices Error

I had a problem with Save for Web and Devices in Photoshop CS4 - and am posting the solution for anyone else that might encounter this (posted previously for Mac but not Windows). This problem suddenly occurred - and I'm not sure why. I had the most updated Photoshop CS4 version: 11.0.2.
Issue: When I tried to overwrite an existing image using Save for Web and Devices, I received an "Adobe Save for Web & Devices Error": "Could not write the file. A file system error has occurred"
This error prevented any file (originally created using Save for Web &Devices) from being saved again with the same name. I figured out the solution by finding the resolution for Mac Photoshop and adapting it for the PC version. The solution for me was to delete the following files: "Default Settings.iros" and "Recently Used Optimizations.irs" (the only two files present) in the following directory:
C:\Documents and Settings\[user profile name]\Application Data\Adobe\Adobe Illustrator CS4 Settings\en_US\Save for Web Settings\
Note that there were other sub-directories of the "Save for Web Settings" folder - I didn't touch any of those. The problem is now resolved and Photoshop seems to function normally.

Honestly, I haven't had problems with reading/writing files to/from network drives, but I have read on this forum that there are times when it causes problems for people.
And yes, if you used the command line NET USE (or the Explorer Map Network Drive) function to create the drive, it is actually using Windows Networking behind the scenes.
-Noel

Pls help putting together the BEST SOLUTION for PP and AE CS4

Hi guys
I was tasked to put together the best machine (machines) for video editing / rendering .. money is not an issue.
My client is a TV broadcasting network and they do lots of videos everyday .. They want to render their work as FAST as possible because sometimes they have tight deadlines and rendering and re rendering (if there are mistakes) has cost them .. so now they're serious about getting the best technology to achieve best rendering time possible, but in a bit of practical sense of course.. i mean there's no sense spending 1000USD or more for a piece of technology that offers under 10 second faster rendering only ..
What they do and want
- edit/put together/ sequence lots of videos constantly, under premiere cs3 (will upgrade to cs4 on the new machine)
- use affter effects for some effects and 3D stuffs.. but not that much.. but increasingly as time goes by and their video editors get more affter effects training..
- needs really really fast rendering!! Right now it takes them typically 1-2 hours to render stuffs, and what to cut this time by half or more..
Existing Setups on work stations:
Intel QuadCore (Q6600, i7, Q9550, Xeon x3220, and the likes)
4GB RAM DDR2 1066mhz
Highend motherboards
GeForce 9500GT , 9800GT, and GTX 260 216sp
GSKILL Falcon 64GB SSD Drive as primary
1TB Western Digital BLACK edition drives for storage
Software:
Windows XP 32 bit
Adobe Premiere Pro CS3 (80% of all their work done here)
AE CS3
etc..
Running NOD32 Antivirus
I am an somewhat of an expert in Hardware and stuff, i build custom PC's machines most of my life but i have limiited knowledge on optimizing hardware for VIDEO EDITING stuffs.. so i turn to you all.
I do understand that w/ video editing CPU is the most important, followed by RAM, and ofcourse by HDD for disc caches and stuff.. and where videocard may come to an advantage as well. and normally i'd suggest the fastest components available . i7 , extreme processors, skulltrail dual quad setups perhaps? RAID 0 SSD Drive? etc.. but I do not know w/c gives the most advantage, and w/c is a waste of money..
I also read about quadro cards offering really big performance improvements using CUDA tech etc..
again im not the expert at this type of requirment.. so i need your advises..
with unlimitted PRACTICAL budget given to me to come up w/ a solution I initially thought a rendering farm would be the solution, but upon reading around it seems there's no rendering farm solution for PP CS4.. just the adobe after effects part.. so i had to go back to the drawing board and suggest really powerful work stations instead..and perhaps have them migrate to 64bit OS for that "extra" performance.. i myself am on win7 64bit and it's looking mighty good.
1) is this the right move?
2) is it still worth it to put together rendering farm for AE renders only? or might as well concentrate funds on the machines/workstations?
Also along the PRACTICALITY LINE, would it be practical to maintain all the existing machines, and instead build a manned RENDERING MACHINE w/ PP and AE (basically desktop or Server if they are faster at rendering w/ the best specs for the purpose etc) where they can just throw the workload to some guy there for rendering? Atleast the editors can continue using the workstations while the rendering machine guy is at work? and even perhaps setup a gigabit lan network where the RENDERING MACHINES can dynamically pull the work load via the network , not needing to transfer the files to the rendering machine first ? etc
as you can see im not only looking for the best machine, but the best STRATEGY for my client.
Good suggestions would be much appreciated.
regards to all

in a nut shell no. if you do not have to "Share" then Avid is pointless Adobe is a far better answer.
Avid solutions still need a computer. The Mojo.Nitris are a joke and Avid no longer provides computers even the Symphany comes with your choice of Apple Mac Pro or HP 800. (Dual Xeon)
there are better "hardware" answers that what Avid sells for Adobe. Decklink, Aja to name a few.
if you have to share then you have no choice. this is the one area Abode does not lead.
renders have to do primarily with 2 things CPU power (Xeon will render faster than single i7)
and Drives. the faster your drive set up the faster the render. Memory does play a part and so does the video card depending on what codec and to what
it also depends on WHAT you are rendering and from what for the HDDs.
without knowing your work flow format and codec its impossible to suggest something.
in terms of rendering
Core i7
Dual Xeon (faster unless still doing DV/HDV thru firewire)
Sonnet raid array
Scott
ADK

Temporary solution for PSDs and Illustrator 64 bit

I found a temporary solution to the problem of placing or opening PSDs on 64bit computers in Illustrator CS3 and CS4.
Right click the icon for Illustrator and select Properties /
Compatibility
Then select Run this program in compatibility mode for
Windows XP (Service Pack 2)
It doesn't affect the other programs - only temporarily changes the screen for Illustrator only.
I can now open and place layered PSDs directly into Illustrator again.
(Original reference http://radongas.blogspot.com/2008/09/adobe-illustrator-cs3-windows-vista-64.html )

Ryan Dinan, "Importing Photoshop files into Illustrator CS3" #27, 22 Oct 2007 7:00 pm

Best HW solution for Avid and FCP

Hi there,
I have a MacPro system running both FCP and Avid. I'm currently using a Mojo to monitor from Avid and just using my DSR-25 to monitor output from FCP. However, it's a little annoying having to disconnect or change wires every time I want to use a different system.
Does anyone know of any hardware that would provide monitoring for both systems that would also connect up to a DVCam based deck at the same time? I currently use a DAC-10 at work but it seems to have problems when a deck is connected to it. Or am I best to stick with the Mojo and get a PCI-E based solution for FCP? Many thanks!

Don't think there's a fix for you here... the codecs used by Avid and those used by FCP aren't the same so all hardware made for the systems is unique to the systems they are intended for. I'd suggest you get off the fence and go one way or the other and stay there...
Look at AJA products for the best in FCP monitoring solutions. You can't have two FW devices connected at the same time either. i.e. the DAC and a FW deck... the OS doesn't deal with more than one at a time.
Jerry

Save for Web and Devices error

Hi
I have just started receiveing an error message when I go to preview a page in a browser.
I am using Vista and have Photoshop CS4.
The error message reads "Could not complete operationg. A file by that name already exists" (see below).
Does anyone have a solution?
Many thanks in advance
Lee

Thanks Ricky.
The error only occurs when I try to preview any document - even new ones. It works properly when I try to save them.
I am not sure which directory the preview files are saves to - do you know? I have cleared the cached on all browsers though.
I have uninstalled and reinstalled CS4 and the error still occurs.
I have also tried resetting the preferences as you suggest - it didn't work.
Any more ideas?
Thanks again.
Lee

Seeking solution for css and js making client very heavy around 800KB

I have developed GUI using web dynpro,
deployed the application in enterprise portal,
when i save the web page in local machine from browser(IE),
the HTML + css+ js file size comes around 700-800KB.
How can i reduce this so that i can use it in internet.
For internet application noone can afford more than 40 KB in client, Please any solution to the above problem ASAP

Dear jian
The css and js are around 500 KB.
These files get downloaded only when the request is for the first time.
So first time hit will be time taking but from the next time it will be fast.
If u can check and tell the file sizes of css and js of your application, then i can compare with mine.
But generally web applications should be very light in size.so , should i go for struts and can u give me the
advantages and disadvantages of web dynpro against struts.
Web dynpro pages are rendered in client browser ? and which framework does it follow ? is it ajax or ?????

Solution for 32k and 64k error

Similar Messages

Maybe you are looking for