SOLUTION FOR 3GS WIFI could not connect to internet

i'd try all suggestions but still not able to connect...last month i try to update my iphone 3gs to OS4 but now i experience the wifi could not connect or my cellular could not active....3G appear on my signal
TRY THIS GUYS GO connect your iphone to itunes.
after connecting to itunes go to your phone click GENERAL-SETTING-RESET-RESET ALL SETTING.....your iphone will restart and try connect your wifi...presto it works it..SALAMAT.plS REPLY ANY COMMENTS

If your having trouble connecting or staying connected to wifi try changing your router encryption to WAP2 if its currently Wep

Similar Messages

Itunes could not connect to internet.. i have read all your solution but non help, include firewall, restart dns, check IE setting ETC... PLS HELP, my phone can't sync with itune...........

itunes could not connect to internet.. i have read all your solution but non help, include firewall, restart dns, check IE setting ETC... PLS HELP, my phone can't sync with itune...........

i could not do anything with itune, check updates, help. etc..
i am using windows 7.. and the latest itune, (previous itune also can't sync)

Officejet 6700 error while searching for updates: 'Printer could not connect to server'

I recently purchase the Officejet 6700 Premium. While setting the printer up, I received the error 'The printer could not connect to the server.' I first received this while the printer was searching for updates. I later received the same error while trying to set up ePrint from my computer.
The printer is connected through my wireless router. All other print services function normally. It is connected to the network, and I have printed several times over the wireless network.
Though I don't think it matters, since the on-board print set-up gave me the error, I run Windows 7 64-bit on my computer.
Thanks for any help!

What is the IP address of the printer? What is the make and model of the router that you use in the wireless set up? Is the router firmware up to date?
I would first try power cycling the router and the printer. Turn off/unplug the router and then power down the printer. Then plug the router back in and wait for it to be fully up and functioning before turning the printer back on. After you have both pieces of equipment back on and functioning attempt to connect to web services again.
If still having problems I would attempt to set a static DNS on the printer through the embedded web server (EWS) by entering the printer's IP address into the address bar of a browser on a computer.
Once that computer displays that page click on the Network tab.
Then look in the column to the left and find the Wireless section
Click on IPv4
Then on that page look at the 2nd section that is labeled DNS Address configuration
Change the radio button to the manual option
Then for the manual preferred fill it out and make sure it reads 8.8.8.8
Secondary should be set to 8.8.4.4
Then hit Apply
Read the next screen carefully. That message with the "OK" button below it is one that states to click that button to undo the changes you just made. Just navigate away from that page by clicking on another tab.
Then reattempt to connect to web services.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

WLC connect LDAP for Authentication, but could not connect to server

Hi Everyone, I got a problem when I use WLC 5508 connect to LDAP for authentication, but no luck there, it's a simple config, but not easy to work on my job, I got the following messgae:
Service Port - Not connected
Distrubution port include:
     Management Interface - in AP Management VLAN - 30
     Student AP interface - in Student VLAN - 20
     Staff AP interface - in Staff VLAN - 10
AD is in Staff VLAN - 10
WLC LDAP Server setting
Base DN:OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk
User Attribute: sAMAccountName
User Object Type: Person
Debug aaa all enable message
*LDAP DB Task 1: Jul 09 01:40:58.969: ldapInitAndBind [1] called lcapi_init (rc = 0 - Success)
*LDAP DB Task 1: Jul 09 01:41:00.969: ldapInitAndBind [1] configured Method Anonymous lcapi_bind (rc = 1005 - LDAP bind failed)
*LDAP DB Task 1: Jul 09 01:41:00.969: ldapClose [1] called lcapi_close (rc = 0 - Success)
*LDAP DB Task 1: Jul 09 01:41:00.969: LDAP server 1 changed state to IDLE
*LDAP DB Task 1: Jul 09 01:41:00.969: LDAP server 1 changed state to RETRY
*LDAP DB Task 1: Jul 09 01:41:00.969: LDAP_OPT_REFERRALS = -1
WLC GUI Log:
*LDAP DB Task 1: Jul 09 02:56:13.045: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
*LDAP DB Task 1: Jul 09 02:56:11.045: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
*LDAP DB Task 1: Jul 09 02:56:09.045: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
LDP Message of LDAP BaseDN:
Expanding base 'CN=Frankie F. Yeung,OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk'...
Result <0>: (null)
Matched DNs:
Getting 1 entries:
>> Dn: CN=Frankie F. Yeung,OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk
4> objectClass: top; person; organizationalPerson; user;
1> cn: Frankie F. Yeung;
1> sn: Yeung;
1> givenName: Frankie;
1> initials: F;
1> distinguishedName: CN=Frankie F. Yeung,OU=OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk;
1> instanceType: 0x4 = ( IT_WRITE );
1> whenCreated: 8/10/2011 10:28:14 China Standard Time China Standard Time;
1> whenChanged: 8/10/2011 10:31:26 China Standard Time China Standard Time;
1> displayName: Frankie F. Yeung;
1> uSNCreated: 3850555;
1> uSNChanged: 3850571;
1> name: Frankie F. Yeung;
1> objectGUID: 6ebfc7e9-6989-4f11-bae7-62c23af67edc;
1> userAccountControl: 0x10200 = ( UF_NORMAL_ACCOUNT | UF_DONT_EXPIRE_PASSWD );
1> badPwdCount: 0;
1> codePage: 0;
1> countryCode: 0;
1> badPasswordTime: 0;
1> lastLogoff: 0;
1> lastLogon: 0;
1> pwdLastSet: <ldp error <0x0>: cannot format time field;
1> primaryGroupID: 513;
1> objectSid: S-1-5-21-3867848445-1581729766-1247451615-2172;
1> accountExpires: <ldp error <0x0>: cannot format time field;
1> logonCount: 0;
1> sAMAccountName: fckyeung;
1> sAMAccountType: 805306368;
1> userPrincipalName: [email protected];
1> objectCategory: CN=Person,CN=Schema,CN=Configuration,OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk;
Hope I can resolve this problem ASAP, thanks!

Your AD is in the Staff Vlan so maybe the WLC uses the Staff interface instead of management to contact the AD. I don't know how you sniffed exactly.
The comment about eap methods you saw is when you use LDAP with dot1x security. It is the same as saying "You cannot do peap-mschapv2 or eap-fast-mschpv2 with LDAP".
But you can do LDAP for web authentication, that has no eap methods.
Your original problem was a binding problem from the WLC, so we can expect that the WLC really is sending traffic towards AD.

Could not connect to internet even when my cellular data is ON. Have tried the steps mentioned in "trouble shooting cellular data" but still the same issue exists. Can anyone please help me out

I am unable to connect to internet on My iphone 5. I have turned on Cellular data and also 3G but still could not connect.
I have also tried the steps mentioned for touble shooting cellular data, restarted my phone, turned on airplane mode and turned off. removed my sim and inserted back. Still internet connection in not getting connected.
Please can anyone help me out from this issue.
Regards,
Josh

Do you have voice service? If you have voice service but just no cellular data service, I would suggest calling your carrier as you may just have an improperly provisioned account with them, or a bum SIM card.

After installed the Lion, my Mac could not connect to internet. At least the my apple Mac turn on second time, then it would connect to the network. Who can tell how to fix it? Thanks!

Since my iMac OSX have installed the Lion last week, my iMac could not connect to the internet in the first turn on, and at least I turn off the computer, and turn it on again, then there is not problem to connect to the internet. So, it take much time to access to network.
Today I called apple store to fix the problem. They rebooted my system with their distance control.By that time, it seems work. But after couple hours later, I turn on my iMac, there is not connection to the network again. I hope someone could help me to solve that problem. Thanks!

I think I would call them back to follow up. As far as they know, everything is fine. But if you call back they can continue from where they were. They usually give a case number either over the phone the first time you called, or in an email later.

C5 connected to PC..Could not connect to internet

when I connected my C5 phone to PC and tried to connect to internet through Nokia PC Suit new version..
Could not connect ..can you solve this problem?
Thank u in advance

Hey lathee9543,
Best thing would be to download and install the latest version of Ovi Suite suite here:
http://europe.nokia.com/support/product-support/nokia-ovi-suite
Once successfully installed follow the steps to create an internet connection:
Open Nokia Ovi Suite and connect your phone to the computer using a USB cable or Bluetooth connectivity.
Check that your phone is shown as connected at the bottom toolbar of Nokia Ovi Suite.
Select Tools > Connect to internet. Click Yes to confirm that you want to connect to the internet.
Nokia Ovi Suite lets you know when the connection has been created.
To end the connection, select Tools > Disconnect.
If you have problems with connecting, check your connection settings from Tools > Options > Connection settings.
Let me know how it goes

Solution for Windows 7 can not connect to Time Capsule Guest network

Problem: Sony Vaio running Windows 7 (64bit) will not connect to my Time Capsule Guest network
For added security, I set up a guest network at home. My friend brought over a Vaio and was unable to get an internet connection via my Guest network. The Vaio connected to the Time Capsule with no problem, with full bars, but was not able to get on the internet.
After way too many hours going through useless online suggestions and even calling Apple tech support to see if there might be a known compatibility issue (where I was told they had no idea and I should call Mr Softy) I discovered that the Vaio had somehow set itself to use the DNS Server address of the Time Capsule, main network, not the guest network. (ie Main network uses 10.1...., Guest uses 172.1....) so once I set the Vaio to Obtain DNS server address automatically it fixed the problem and connected to the internet via the Guest network.
Detailed solution:
Configure Time Capsule Guest as follows:
Network Name: fill in the blank
Allow Guest Network to communicate: left unchecked
Guest Network Security: WPA/WPA2 Personal
Password: fill in the blank
Configure Vaio:
Set up new connection from the Network and Sharing center using the name given to Guest network
(for password chose WPA2-Personal>AES>then your Guest Password)
Select Manage wireless networks from left column in main Network and Sharing center window
Select Adapter Properties
Click on Internet Protocol Version 4 (TCP/IPv4) to highlight it, and Select Properties
Make sure both Obtain an IP address automatically and Obtain DNS server address automatically are selected then OK & go back to Network and Sharing center
Connection is active.
Hope this helps those condemned to playing system admin for their windows brethren

Great post!
Here are a couple of more methods to add to your bag of tricks:
Method #1: Use Win7's built-in diagnostics to remedy network maladies
• Start > Start Search > type in: ncpa.cpl <Enter>
• Select current active connection.
• Click Diagnose this connection
• Select Reset the network adapter
Method #2: Use the ipconfig tool to renew the DHCP-provided IP address information
• Start, then click Run, and then, type: cmd, and then, press <enter>
• At the prompt, enter the following commands; press <enter> after entering each one:
ipconfig /release
ipconfig /renew

TS1398 my father gifted me ipad2 unfortunately i could not connect to internet . wifi is connected but webpage cannot be opened says server not responding plz help

help to connect to internet wifi is conncted

It is me again. I have just noticed a more like this item that matched mine and one of the replies there has sorted my problen out. A big thanks to Spyglass Sally for that.

Connected to airport wifi but not connected to internet

I am using an airport wifi - time capsule. The internet works on my Mac which is wired in; however when I try the wifi I can connect to the airport network I made and have used for years but a the network does not connect to the internet. I have powered down/ restarted and all that typical stuff. Thoughts?
I am running Snow Leopard if that matters

Ok, this is clear and simple.
Your TC is wrongly configured. I am not sure if it has been like this for years and you are now adding a computer but the reason it is failing is because you have captured the public IP on the imac which is wired so the wireless computer cannot get an IP address.
You need to
1. Power off your cable modem.. I am assuming it is cable service .. if not tell me.
It needs to go off for 20min or so for the imac to drop the captured public IP.
2. Reset the TC to factory.. this will not harm your backups.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
3. Since you are using snow leopard you must be on v5 airport utility.
The main things to do in the setup is to ensure you set the right settings for internet.
You are going to share a public IP .. at the moment you are bridged.
Then just check that the actual connection is set to dhcp.
Yours will look different ... don't worry about the actual numbers it is the using dhcp that is key.
Setup the base station name and wireless to create a wireless network.
eg.. I suggest all names that are short no spaces and pure alphanumeric.
Just tell us if you run into troubles.

"Could not connect to internet." error with 2.2 update

Ok, I updated my iPhone to 2.2 this morning. Ever since then, my internet access has been extremely spotty, and slow if I can get it at all. This only happens over my 3G connection (WiFi is not affected), and was not an issue this morning on the 2.1 version of my phone. I've restarted and reset the phone to no avail.
Any help in resolving this would really be helpful!

Add me to the list of people with internet connection problem with 3G after updating to firmware 2.2. In safari, under 3G a website would just load forever, sometimes showing the "cannot contact server" message. Under Wi-Fi and Edge, everything works fine. I have a white 16gb iphone 3G. I also updated my wife's white 16gb iphone 3G to firmware 2.2, and her phone does not have the same internet connection problem under 3G, everything seems to be working fine so far. Also spoke with a friend who also has a white 16gb 3G iphone and still using firmware 2.1. He mentioned that he's also been seeing more the the "cannot contact server" message with his safari under 3G. Maybe this is a AT&T problem?

After install Win7, could not connect to Internet

The system could not recognize the network adapter, facetime HD, There is no sound either.
could anyone suggest where to download the related drivers? Thanks a lot!

Hi,
the BootCamp Drivers are on your OSX Snow Leopard Install DVD.
Insert that disc while in Windows 7 to install the drivers.
After that, if needed, you can update the drivers to versions 3.1 or 3.2 depending on what version is on your OSX disc.
Regards
Stefan

IBook G4 that's connected to wifi but not connected to Internet

I Have a later 2005 model iBook G4 running OS X 10.5.8 Leopard, I'm having trouble connecting to the internet. I am able to connect to my home WiFi network but not able to connect to the internet. How do I fix this?

The iBook is Capable of 802.11g/n/b using Airport Extreme
Airport Extreme did not get 'n' coverage until late 2006, on Core2Duo and Xeon Macs. The iBook is not one of those Macs.
If you are using 802.11n connections on your Qwest that will be a problem for the iBook. You need to make it is set for 802.11g/n network.
Qwest was taken over by CenturyLink, and the configuration setup is here:
http://internethelp.centurylink.com/internethelp/wireless-troubleshooting.html

Could not connect to internet after installing PO 8.1.6 on Windows 2000

Hi folks !!
I wish some one could help with this !
After installing PO 8.1.6 on Windows 2000 professional , my computer become unable to connect to the internet. I have a DSL connection. I know that my connection is Ok because I have linux on my computer too and connection to the internet works just fine.

Bugger.
Thank you very much for the info!
Oracle 1.0.4 installed ok and does work - one or two crashes here or there but it does the job.
Rob

Reader for Windows ME computer not connected to internet

I need a full version, not a setup link; where do I get it?

http://get.adobe.com/reader/enterprise/

SOLUTION FOR 3GS WIFI could not connect to internet

Similar Messages

Maybe you are looking for