SOLUTION for all DLT 4000 users

If you have had, like me, troubles in getting your DLT 4000 work with DVDSP 4, here is the solution.
The problem is DVDSP continously asking for the DLT to be inserted, also when you've already put it in.
The DLT 4000 is too old and too slow for your Mac, so the drive doesn't have the time to intialize the tape and something like a "timeout" occurs.
To solve, you need to FREEZE DSPro, do this or use some freezing shareware program:
1. Launch a Terminal window.
2. Change directory to the DVDSP folder, by typing the following:
cd /Applications/DVD\ Studio\ Pro/DVD\ Studio\ Pro.app/Contents/MacOS
(note that the backslashes are required in Unix to "escape" spaces in file
and directory names)
3. Start the DVDSP application from the Unix shell, by typing the following:
./DVD\ Studio\ Pro
4. DVDSP will run normally, but when you get to the point where it wants you
to insert the second tape, click in the Terminal window, and press
"control-Z" to suspend DVDSP. If you did it right, you will see the word
"Suspended" in the Terminal window.
5. Insert the second DLT tape, and wait for the drive to become ready (no
more whirring noises or blinking lights).
6. When you are ready, type "fg" into the Terminal window, and press
[Return]. This will bring DVDSP process back into the shell's "foreground,"
and will begin running again, and start writing to the drive. Life is good
again.
Do not close the Terminal window or type anything else into it until after
you are finished, and exit DVDSP normally.
I've found this hint here:
http://www.dvdafteredit.com/?q=node/198
I can guarantee that this works.
I've made a lot of DLT with this technique.
Bye
Valerio

Gentlemen,
It is highly recommended that, mimimally, a DLT 8000 and DLT Type IV tape be used for Image submission to replicators.
Writing on the slow DLT4000 is driving your replicator nuts, and some will complain to your clients; as it takes forever to extract the Image in comparison, especially with DVD-9's.
Excellent shape DLT 8000's, about 4 times faster than DLT4000's, can be found on eBay for under $200.
Take care,
Trai
Trai Forrester
TFDVD Research Labs
Http://www.DVDVerification.com
As per Apple Discussion board rules: Disclaimer - I'm associated financially with the above link.

Similar Messages

  • Customizing a generic user on back-end for all portal’s users HR, is it pos

    Customizing a generic user on back-end for all portal’s users HR, is it possible ?
    Hi,
    With SAP ECC 6.0, on HR environment, I need to create more 4.000 portal’s users.
    I would like to find a customizing to create one generic user (with rule ESS / MSS) on back-end and create (import) 4.000 users on portal.
    I think it’s should be the best practice to maintain users’s access.
    -     What is your opinion on that ? Is-it possible to customizing this ?
    -     Have you a solution ? What is the custonizing to create ?
    Thanks for you answers.

    Adam,
    I have moved this topic into the [link=http://technet.oracle.com:89/cgi-bin/forumdisplay.cgi?action=topics&forum=Oracle9<i>i</i>AS+SSO+and+Portal+Security&number=83&DaysPrune=20&LastLogin=]Oracle9iAS Portal SSO and Login Server forum[link] where it is open and can still be posted to.
    Rich

  • Found a solution for all issues!

    Hi all, I just wanted to post my solution for all my problems with my nokia e63 (maling issues, crash issues, browsing issues, etc), yes, there is a simple way to solve them all and I took it, I just got a Blackberry and now everything runs smooth!! YES!, there is light at the end of the tunel, jajajajajaja I'm so happy to finally get over this nightmare, hope you all find your way out of Nokia's blackhole! Good luck

    I was able to locate an example that somewhat applies to your application:
    https://decibel.ni.com/content/docs/DOC-11632
    I simply modified the code to allow for CI and CO tasks, similar to your VI, and it worked fine.  I've attatched the modified code below.  However, I was unable to run your code without receiving the error you were seeing.  Even after I made the VIs identical (leading up to the Start Task VI), I saw different bahavior.  The VI that you are working on may have been corrupt.  This modified example should be a good starting point.
    Applications Engineer
    National Instruments
    Attachments:
    9401NibbleConfig.vi ‏29 KB

  • Resolve installed Flash player not excuted for all the Vista users on my PC?

    I have a Windows Vista 32-bits system.
    I have created 2 admin and 2 standard users.
    Internet Explorer 9 (IE9) 32 bit is installed but also Chrome and Firfox are used.
    For 1 admin user Flash works fine when accessing a site in IE9 that requires Flash.
    For the other users, including the admin user, IE9 must be run "as adminstrator" by specifically choosing that option.
    If not run "as administrator" IE9 states that Flash needs to be installed. That either leeds to Flash player not being installed (error is that it is already installed) or that after a succesful installation the problem simply occurs again (and again and again ...)
    I want the standard users on the pc to be able to navigate to trusted sites without running IE9 in "as adminstrator" mode.
    What do I need to do?
    Can I set Adobe Flash player to be available for all the users for Vista and IE9?
    Do I need to alter registry settings manually?
    If yes - how and which?
    Thanks in advance.

    Chris,
    Thanks for the reply but unfortunately it does not resolve the problem.
    Other users (including the other system administrator) still need to run IE as administrator.
    When in my sysadmin account the shortcuts for other users to a URL requiring Flash and using IE9 execute fine GRRRRRRR.
    This is very frustrating.
    On my pc Chrome aand Modzilla have no problems.
    The childrens protective software I have however is based on IE.
    Do you have any more suggestions?
    My alternative is to downgrade IE9 to IE8 or 7 but that is also not an easy exercise ...
    Thanks in advance for any input.

  • Access denied for all (most?) users in all site collections of web app

    Hi,
    I have a Sharepoint 2010 farm pre-SP1 (yes should be updated!) and for all site collections of a web app, all users are getting access denied.
    Now in my title I said "most?" because I have found one user in another office who does not have this issue. This web app/site collections also do not go through f5 or any proxies.
    Even if I add myself as a site collection admin via central admin, I get the same result. I've looked at everything, windows time on the server (not using kerberos), errors in event log (nothing), uls logs just say access denied (very helpful!), etc...
    I can try what's suggested at http://social.technet.microsoft.com/Forums/en-US/e66f1b09-605d-4546-a581-2a9283c238c0/access-denied-for-all-users-and-for-site-collections-owner?forum=sharepointgeneralprevious but when asking colleagues, there's been no
    changes, let alone with those accounts? I can do a get on the property tomorrow to find if there is a value set first, however.
    Any suggestions on this?

    Hi,
    Please try logging in the site with farm account.
    If it works, please make sure you have superuser and superreader accounts in CA > Application management > web application policy. If not, please add both accounts with the powershell script in the article below, this can cause all users denied when
    access the site:
    http://technet.microsoft.com/en-us/library/ff758656.aspx
    Here is a similar thread:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/a49b1ab8-273f-41e4-a0b8-be0e31c6733b/all-users-including-site-collection-admins-receiving-access-denied-from-one-site-collection?forum=sharepointadminprevious
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Defaulting the decimal ntoation for all internet webshop users

    Hi,
    is there any way (other than su01-as BASIS has not given any of us access to this transaction) to control the default decimal notation that the users see in transactions?
    As of now, the default decimal notation of 1.234.567,89 visible to the users. We want to change it to 1,234,567.89. But rather than doing it for each user by going to su01 and Defaults, we want to know if we can control this at organization level itself so the new default is picked up for all existing and new users.
    thanks for any replies in advance.

    It is a part of master data and sap user maintenance. It will always be a Basis / business team responsibility. Yes, developers will not have access to SU01. That doesn't mean that you should start writing programming for something you don't have to.
    Tell the business team  what they have to do with the basis team. If there are plenty of (1000s of ) users and they want some automated procedure to update the information in SU01, then help them writing a small piece of code to change the required data.

  • Retrying a particular failed Process Task for all the OIM Users

    Hi,
    We are using OIM 11.1.1. On a particular day one of the systems was unavailable hence all the process tasks for that system failed for a number of users. Is there any way of viewing all the failed process task and retrying them together, there are over 3000 users and it is not possible to go through them one by one.
    Any method either through the console or doing it programatically would be very helpful.
    Thanks in advance.
    UZ

    The OTI table has all the rejected task information. You can use it to link to user and resource instances through the OIU table as well.
    You can then take the SCH_KEY and then use code like this to process them:
    public void completeTask(){
    long[] task = new long[] {123123,3242134,23432,43534,34656,456456};
    int counter = 0;
    for (long key:task){
    try {
    counter++;
    provIntf.retryTask(key);
    System.out.println(counter + "|" + task.length);
    } catch (Exception e) {
    -Kevin

  • HTTPS Configuration for all BSP appliation users

    Hi ,
    I have enabled HTTPS Configuration for BSPApp using X509 certtfictes in our CRM Landscape.
    This i have done for list of users and it working well.
    I want the same functionality for all users,  Please suugest me.
    Regards,
    Satya

    Any Idea?

  • Change default homepage for all windows terminal user profiles

    would like to change homepage,bookmarks,proxy settings for all user profiles on windows server 2003/2008

    You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
    Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    pref("general.config.obscure_value", 0); // use this to disable the byte-shift
    See:
    *http://kb.mozillazine.org/Locking_preferences
    These functions can be used in the mozilla.cfg file:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes
    *http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/
    *http://mike.kaply.com/2012/03/22/customizing-firefox-advanced-autoconfig-files/

  • Request to make a free iwork apps for all ios device users

    I am using iphone 4s &amp; ipad 4th gen, i have request you to make a free all iworks apps for all ios devices, these apps are really good for daily use in business &amp; college also.
    Thank you

    You are not talking to Apple here, just us users. You can give feedback to Apple if you like, but most companies are unlikely to start giving away core products to everybody.

  • Possible solution for all you that have skipping songs, & scratchy sound

    Hi All,
    After upgrading to 7.02, I was extremely annoyed with the performance. But here's what I found and did. In a nutshell, you uninstall the new version and install a 6.05 version or earlier. I'll include some links to what I found and hopefully it'll help. Here's the first link and it describes what you need to do. Scroll down to the post by marlowe5 posted 10-08-2006, 8:06 A.M. and I also included the exact wording from the post below the link.
    http://www.oldapps.com/forum/archive/index.php/t-228.html
    This is the exact wording:
    Thanks for the advise in this post... after installing iTunes 7, and then 7.01, my computer was running really slow, iTunes was skiping and garbling and acting terribly... so I really needed to go back to 6.05.
    For all of you that need to do the same it's pretty easy:
    I downloaded the 6.05 install file from from oldapps, uninstalled 7.01 and then re-installed 6.05. When I ran iTunes it did give me the error message that the library file was created in a new version and couldn't open, but I then deleted the 'itunes library.itl' file (in My Music > iTunes folder) and then replaced it with the backup that was automatically created when I installed 7.01 (in My Music > iTunes > Previous iTunes Libraries). iTunes then started up fine with all my music and playlists. And all the skipping and CPU bogging is better now.
    Library file note:
    With the library file, when you update iTunes it also updates the library file, which won't work with older versions. So you need to replace this file or create a new one. I would recommend copying/backing up the new library file to a different location to be safe instead of just deleting it. You'll see above where to find the new library file and prior ones. When I made these changes I did two things to be safe, 1) I moved the new "iTunes library.itl" to a backup location instead of deleting it 2) I moved my most recent old library file from(My Music > iTunes > Previous iTunes Libraries) to (My Music > iTunes folder)and renamed it to "iTunes library.itl". It was previously "iTunes library 2006-1-18.itl." Before renaming it, iTunes didn't find the library so renaming it worked. Your file name will most likely have a different date so don't look for the exact file I mentioned. Plus it's probably a good idea to make a copy or back up this library file too.
    If you don't have any previous library files, you may need to create a new one. I don't have the info but I believe the link to the post should have that info.
    After reading through the post and other info, the only thing that it appears might be lost are playlists that have been created since the upgrade. I don't believe any music should be lost but that's why it's safer to backup the new library just in case. I did not lose any music.
    Also, here's a link to where I found old versions of iTunes:
    http://www.filehippo.com/download_itunes/?1249
    Hopefully this helps and good luck. I'm back to normal now.
    Dell Dimension 4550   Windows XP  
    Dell Dimension 4550   Windows XP  
    Dell Dimension 4550   Windows XP  

    Soccerteen,
    Make sure you try all the other remedies mentioned in other posts. If this didn't work for you then try below. I consider it a last ditch effort since it's going back to a previous version, which unfortunately works much better than 7.0x for me.
    Remove & backup your current library file to a different file/location to be safe. Once you do that, uninstall 7.02, and then install 6.05 or any 6 version. Once 6.0x is installed and you've opened it, you'll need to create a new library file. If you've removed the library file from (My Music > iTunes folder)it should load up with a blank slate. What you to do from this point is create a new library file. Read the oldapps link, the post from "Admin" dated 9-30-2006 5:30 PM should help. Most likely all of your music will be under one main file but you might have to add individual folders one at a time depending on how much music you have. Since I didn't have to go this route, I'm not sure if it's the best route but after reading multiple post, this was the most common suggestion. Worst case scenario, you can always reload 7.02 an reinsert the backup library file, which will put you back where you started.
    Hope that works for you and good luck!

  • Best coverflow and missing feature alternative solutions for all platforms.

    Personally for me coverflow was a important feature. Not JUST a feature but what really defined iTunes as BEING iTunes.
    I would have actually loved if apple instead of removing it expanded on it and made it faster,better,stronger. With things like back label support  so on and so forth.
    I'd like the communities thoughts on some of the best alternatives for the missing coverflow & other features currently left out of iTunes 11 on both Mac and Windows.
    Also, If there is a way to link(link up) any of those to iTunes 11 for track and volume control. Ideally for not just sending but also receiving track and volume input.
    And whats the absolute BEST solution for each platform. I understand running iTunes 10.7 or 11 sandboxed or on another machine may also be an option.
    So.. lets look at things like resource usage Vs usability...
    For me CAD (CD Art Display) has always been helpful especially combined with raindrop even tho it doesn't have flow options for the most part on 99% of themes. It still makes my library pop.
    Looks like there are 3 options for Mac
    Steel Sky (SteelSkies)
    Everplay
    CoverStream
    Its worth noting Everplay has Last.FM support. Not sure if that can be integrated into iTunes 11 somehow.
    For windows the only thing i could find remotely like coverflow is a widget called XDeskCover
    To mods:
    Please stop deleting my posts. If you want to take the time to completely remove a feature from a program atleast let us explore some alternatives so we can continue actually using apple products.

    another method suggested in these forums in the post "session manager stopped working with firefox 3" by Charles Anderson works for me and allows me to use my little X.
    go to options -> General tab
    under startup/when firefox starts -> change to something other than "show my windows and tabs from last time".
    I've had this on show my homepage previous and it got changed somewhere and I think it was from an update or addon which is why a few others are having the same issue.

  • Anybody using a Citrix or VMware solution for all Oracle 11i clients/users?

    Hi,
    We are seeing a fair amount of browser issues in 11i so we are thinking of purchasing Citrix or Vmware and just have all users of Oracle go through this system instead of the browsers on their PC's. Does anybody do this now, and what are the advantages and disadvantages?
    The real chance we will do this is only about 50% - We recently eliminated Jinitiator and went to JRE, which is somewhat better, but at the same time the JRE is being updated fast and furious (e.g 1.6.0_22 came out yesterday, 21 did not have a long shelf life).

    Pl post details of EBS version.
    >
    We are seeing a fair amount of browser issues in 11i ...
    >
    Pl detail what these issues are. How would using Citrix eliminate or reduce these issues ?
    Oracle recommends that automatic JRE updates be disabled.
    Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite 11i (Doc ID 290807.1)
    http://blogs.oracle.com/stevenChan/2010/07/warning_e-business_suite_issues_with_sun_jre_160_21.html
    http://blogs.oracle.com/stevenChan/2010/08/jre_6u21-b08_for_ebs.html
    HTH
    Srini

  • Solution for all your login problems !

    Hi everyone,
    Due to the problem of designing a Login solution experienced in this forum...i have a solution that takes care of this problem i will like us all share this and pls give me a feed back as to how it works for you or its efficiency.
    This solution has three parts.
    (a) The Bean
    (b) The HTML Page
    (c) The JSP Page
    XXXXXXXXXXXXXXXXXXX The Bean XXXXXXXXXXXXXXXXXXXXX
    // dsn name is test_register
    // table name is registrationDetails
    // package bsoft;
    import java.sql.*;
    public class LoginExample {
    private String username = "";
    private String password = "";
    public LoginExample() {
    public void setUsername(String username) {
    this.username = username;
    public void setPassword(String password) {
    this.password = password;
    public boolean authenticate(String username2, String password2) {
         String query="select * from RegistrationDetails";
         String DbsUserName="";
         String DbsPassword="";
         String finalUser="";
         try {       
                   Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                   Connection con=DriverManager.getConnection("jdbc:odbc:test_register", "dataDB_uname", "dataDB_pass");
                   Statement stat=con.createStatement();
                   ResultSet rst=stat.executeQuery(query);
                   while(rst.next())
                        DbsUserName=rst.getString("UserName");
                        DbsPassword=rst.getString("password");
                        if (username2.equals(DbUserName) && password2.equals(DbPassword)) {
                        break;               
                   return true;
              }catch(Exception e){
                   e.printStackTrace();
                   return false;
    XXXXXXXXXXXXXXXXXXX The HTML LOGIN PAGE XXXXXXXXXXXXXXXXXXX
    <html>
    <head>
         <title> Olumide Bolusoft </title>
    </head>
    <body>
    <br>
    <p> <h3><center>Please enter your user name and password to login to Bolusoft Inc </center></h3></p>
    <br>
    <br>
    <form action="processLogin.jsp " method = "post� >
    <center>username</center>
    <center><input type = "text" name= "username"></center>
    <center>password</center>
    <center><input type = "password" name = "password"></center>
    <center><input type="submit" name="Submit" value="Login"></center>
    </form>
    </body>
    </html>
    XXXXXXXXXXXXXXXXXX The JSP PAGE XXXXXXXXXXXXXXXXXX
    <%@ page import="java.util.*" %>
    <jsp:useBean id="bsoftLogin" class="bsoft.LoginExample"/>
    <%
    String username = request.getParameter("username");
    String password = request.getParameter("password");
    if(bsoftLogin.authenticate(username, password) ) {
    %>
    <jsp:forward page="success.jsp"/>
         <%
    } else {
    %>
    <jsp:forward page="errorRetry.jsp"/>
    <%
    %>
    N.B name this file as processLogin.jsp
    XXXXXXXXXXXXXXX The End XXXXXXXXXXXXXXXXXXXXXXXXX
    I hope this helps majority of us who are having problems with implementing a login solution.
    Also note that u can connect to any db of ur choice..the query syntax and connection parameters now depends on that supported by your DB.
    Thanks All
    Olumide B

    Hello
    I think u have used Model 1 Architecture.
    It would be great if u follow the MVC Architecture.
    What about this??
    Login.html -> User login Page.
    Login Servlet -> Handles Request from Login.html
    LoginBean -> Uses to validate the user.
    Success.jsp/Retry.jsp -> The Final page that will be displayed.
    Am also new to Java Server Side programming.
    Suggestions are always welcome.
    Sathish

  • SSRS How to grant BROWSE permission for reports for all the application users?

    Hello,
    Problem Statement
    I need to allow all of my application users to browse the SSRS reports via logging onto the Report Manager and to some other I even want them to use Report Builder to modify & upload the report.
    How could I achieve this.
    Environment & Current implementation
    We use SQL Server 2012 reporting services.
    Custom authentication has been implemented using IAuthenticationExtension Interface. For more details, please refer
    this msdn link.
    Currently, for each new user created in the application, the admin has to manually give BROWSER role to the username to enable that newly created user to browse the reports.
    Is there any way in which we can give "everyone" the BROWSE permission and get rid of this manual permission granting process?
    Please feel free to ask for any additional information you need to help me on this issue.
    Thanks!
    -Vinay Pugalia
    If a post answers your question, please click "Mark As Answer" on that post or
    "Vote as Helpful".
    Web : Inkey Solutions
    Blog : My Blog
    Email : Vinay Pugalia

    Hi vinaypugalia,
    According to your description, you want to grant permissions for users to access report server in a batch, right?
    In your scenario, you can use
    script files( AddItemSecurity.rss and ConfigureSystemProperties.rss )with the Reporting Services SOAP API to assign permissions. It’s better that you add those users to a user group then run those script.
    Similar thread for your reference:
    SQL script to grant user permissions for SQL Server Reporting Services
    Programmatically adding users to SSRS?
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

Maybe you are looking for

  • Is "diverging interaction" possible?

    I have started creating a presentation in Motion with the intention of taking into Flash for the interactive part, but it's taking a long time. Most of the presentation could be set out in Keynote, but there's a point where I want to offer 4 options,

  • COPA document with missing values

    Hi Experts, after posting in SD (debit memo rebilling) a CO-PA document is created, but with missing value for value field 'interest'. In transaction KE4I, there is correct assignment of SD condition to value field 'interest'. We use cost based CO-PA

  • OBIEE 11g RPD and case study document required for practice

    Hi OBIEE guru's, Could you please help me by posting OBIEE 11g sample RPD and case study document for creating Answers and Dashboards. I need to brushup my skills on creating Answers and Dashboards. Thanks in advance.

  • Symbol on Grid cells

    There is a symbol on the left side of a grid cell that I have ever seen before in 11.1.2.1. It appears to be blue on my screen and has a scroll shape to it from what I can make out. Any one know what that is.

  • W520 CRASHES SSDs WHEN WAKING UP FROM SLEEP MODE

    I bought a W520 about a year ago and have gone through 2 SSDs (new Crucial M4 256GB drives), each of which died when the machine was coming out of sleep mode.  I had problems with the W520 not coming out of sleep mode properly since I receive it, but