Solution for Connecting iMac to Uverse Wireless Network?

Hi. I would like to upgrade my 2003-vintage iMac flatscreen (that is now my secondary computer) so that I can connect to my Uverse network at home. I am considering using a USB adapter such as the one in this link:
http://afterthemac.com/product.php?id=802.11nApple_Wireless_USBAdapter
Does anyone have any experience with this sort of solution? I would prefer to do this instead of installing an AirPort card. Any thoughts would be very much appreciated. Thank you.

As a group, the USB wireless adaptors have received mixed reviews, but largely because someone buys one that lacks Mac driver support. That seems to be covered in the model you've linked.
That leaves my only concern the statement:
...with optional-use Adapter Vertical Base Stand and 1 meter travel cable (two cables!) for up to 80% Increase in Signal Range
The bit about "two cables" makes me nervous. It's not clear if the adaptor takes up TWO of your USB ports. If you lost ports, that could be a problem. Also, bus-powered devices may not work from your keyboard ports. You may need to clarify what ports are recommended and whether the device has (or needs) a separate power supply.
I suspect a call to the vendor would sort this out.

Similar Messages

Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

Hi,
I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
Your help is really appreciated"

Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help

I currently have a WPN824 v3 Netgear router and I'm trying to set up my Apple TV. I'm able to connect it to my wireless network but my airplay feature is currently not working.

I currently have a WPN824 v3 Netgear router and I’m trying to set up my Apple TV. I am able to connect it to my wireless network but my airplay feature is currently not working. The icon does not appear on any of my devices. My ipad and ipones all are currently up to date and are all joined to the same network. Is it the way that my router is configured. Please help let me know what I need to change in my router settings or does my router not work with Airplay. Or is there a simple fix.

you don't mention which products you use
only ipad2 and up support mirror
and only iphone4s and up support mirror
other devices only use airplay for apps which support tvout options

Can't connect AE to existing wireless network

I can't get my AE to connect to my existing wireless network. I saw the other thread on this and followed those steps, but it didn't work. Here's what I did:
1. Connected the AE to my D-Link DIR-655 wireless router via ethernet cable.
2. Opened Airport Utility and established a connection to the AE.
3. Renamed the AE and entered a password.
4. In the "wireless" tab, I selected "join existing network", chose my wireless network, selected the security type (WPA Personal) and entered the password.
5. In the "music" tab, I named the speakers and entered a password.
So far so good. I clicked "update" and the AE restarted. After a while I received an error message informing me that the base station could no longer be detected. According to the directions posted in the other thread, this is actually supposed to be a sign that the AE is now in client mode and all is well.
I unplugged the ethernet cable from the AE and router and then went to the other room. I plugged the AE into the speakers and then plugged the AE into the wall.
However, instead of a green light all I have is a flashing amber light, even after several minutes. No connection.
I reset the AE and repeated the steps above, to no avail. Still a flashing amber light.
Any ideas?

I'm having a similar issue. My AE is connected directly to a Netgear WGR614v4 router, and I run through all the steps you mentioned. When I choose to update the settings to the AE, I get the same "error" you mentioned about the AE not being found, and I also took that as a sign that I'm in client mode. I moved the AE to the other room, connected my mini cable to the stereo, then plugged the AE back into the wall. The AE runs through its setup and eventually gets a solid green light, so I'm thinking all is well.
The problem is that I then log back into the AirPort Utility on my laptop and the AE is not shown in the top left like it should be. After doing a bit of reading, I've figured out that I can manually find it by going to File>Configure Other and entering the AE's IP address and password. Then I get a window showing the details of the AE, its name, network, encryption, etc. However, if I close this window, it still doesn't show up in the main AirPort Utility screen and I'm not sure how to configure it for AirTunes.
Hoping that's just a bug with the AirPort Utility software, I open up iTunes to see if I can locate it there. I know I should see a pulldown menu at the bottom of iTunes that gives me an option for AE as my audio output method, but the menu is not there. Now I'm completely stuck.
At this point I decide to start from scratch, so I do a Factory Default reset by pressing down the reset button on the AE as I plug it into the wall. Now it is supposedly reset, so I plug it back into my router, then it runs through a setup sequence and lights up solid green before I've even done anything. It shows up in AirPort Utility with a default base station ID, but my computer won't connect to it at all. I'm hoping I can try to reset it again this evening and at least get back to the normal setup screen, but I'm really not sure what I could do differently at this point.
This is frustrating and I'm on the verge of giving up, but I REALLY want this to work out.

I have an eMac which I want to connect to my home wireless network. My router is D-Link-601 tech 802.11n. My emac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

I have an eMac which I want to connect to my home wireless network. My router is D-Link - 601 tech. 802.11n. My eMac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

You need the Airport card OR Airport Express but not both. Considering the age of your machine, I recommend Airport Express as you will find other uses for it whenever you replace the eMac.
To set up the AE, you do need OSX 10.4 or higher.

HT4437 I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

Welcome to the Apple Community Willy.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

Need to configure Airport connection to access corporate wireless network

Need to configure Airport connection to access corporate wireless network.
Have imported my certificate from Windows XP machine into keychain and made Leopard always trust in order to authenticate automatically into my corporate wireless network. Also attempted to establish a new 802.1x connection via network preferences without any success. It keeps asking me for username and password even though we used self-generated certificates to log into corporate wireless network. Does anybody have any instructions on how to successfully configure certificates in Leopard?

Welcome to the discussion area, jackregan!
You'll need to "hard reset" the Time Capsule and then reconfigure it again. To do this, you will hold in the reset button until you see the amber light begin to blink more quickly, keep holding another second or two and then release.
The "hard reset" will not affect the data on your Time Capsule
Now you can open AirPort Utility and configure the Time Capsule using wireless (be sure to log on to the default network which will have a name like Apple Network xxxxxx), or you can connect an ethernet cable from your computer to one of the LAN <-> ports on the Time Capsule to have AirPort Utility communicate with it that way.
When you open AirPort Utility, click Continue to follow the guided setup to re-configure your Time Capsule. You would choose the option to "Create a wireless network" when you are given the configuration options.

After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks

After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks

Turn off your firewall and antivirus software.

Solutions for connecting dual screens to MacBook Pro?

Anyone have any solutions for connecting TWO (2) individual displays to a MacBook Pro? I am currently using "Matrox Power Desk" but this thing *****! I have two Apple 23" Displays (they're older, probably from 2006ish) and want a better method for connecting them both to my MacBook Pro.
Any suggestions are appreciated!

The Matrox MXO is a pretty good solution.
http://library.creativecow.net/articles/ross_shane/MXO.php
Shane

I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? No firewall involved.

I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? There is no firewall inbetween the two connections, as this is all on our internal network.
Both devices can connect to the network, but when they try to talk to each other they can't make the connection.
Thanks.

If anyone ever comes across this and has the same issue, here's what I did to fix it:
My Linksys router has a Network Mode setting, and I had to change it from "Mixed" to "Wireless-G only". (I would've used N but one of the NICs in my house is too old to support it.) Anyway, after making this change, Facetime works fine on the phone. Hope this helps someone else!

Vista connection problem to a wireless network with Linksys BEFW11S4 ver.4 router

I've purchased a laptop with Vista and can't get it to connect to my existing wireless network. I have a Linksys BEFW11SF ver.4 router. When I attempt, I get, "Wireless connection failed because the network denied the association request from this computer." Anyone? Thanks.

Not sure about the Error ....but you can change the wireless settings on the router & see if it connects or not ....

Solution for Poor signal in a wireless WDS network with two Airport Extreme

I have just bought my second Airport Extreme to create a wireless network with the best possible signal. I have one Airport Extreme in my office and the second one (supposedly the remote base) in the living room, two brick walls and 7 meters away. I have follow Apple instructions for the setup, main base "Create a Wifi Network" and Extend network option selected. The remote "join an existent network" and Allow wifi clients selected. According to Apple this is a WDS network between two Airport Extreme.
The network is working and the signal from my iMac is very good in my Office. In the living room the signal with my PC laptop is also very good.
Problem is that my iPod Touch OS 3.0 (I use it as a remote control in my living room with a twonky media server) gets now a very weak wifi signal in my living room, in many cases I lose the wifi sgnal although I sit two meters away from the remote Airport Extreme in the Living Room. If I go to my office with the iPod, then I get a good signal.
I think that only the first Airport Extreme in my Office (Main Base) is emitting a wifi signal and the second Airport Extreme (remote) is only receiving the wifi signal not making a repetition of the wifi signal. (Sorry for my explanation, I am not technical on this.)
I thought that, in a WDS configuration, the remote Airport Extreme WAS suppose to also replicate the wifi signal in my living room.
I have also tried a WDS manual setup with the two airport with the same results.
Is there a solution for this?. Do I have to connect the two Airport Extreme with a wire ethernet in order to be able to have a wifi signal strong enough in my living room for my iPod Touch?.
Thank you for your time.

Thank you Bob for your time.
I understand from your words that with a DHCP reservation I can force de Airport Extreme Main Base to assign an specific IP to a particular client in the network. Is that correct?. If that is the case, I will reserve the 10.0.1.3 to the Twonky Media Server (I need this to be fixed to this IP) and I will change the configuration of the remote Airport Extreme to DHCP automatic.
I will give it a try in a few days. I have spent so many hours with this set up that I am a bit terrified to start again today, to tired from work.
Just one last question. Setting up the remote Airport was very difficult with the Airport Utility. I had to reset and start many times as I always got two errors in the set up:
1.- Internet not connected.
After a minute or so, most of the time the problem was corrected automatically as the remote found the main base that is connected to the internet. I got a confirmation message for this.
2.- Second problem was that Airport Utility said that it could no connect the remote to the specified network. Sometimes (not always) the remote light turn green both in the Airport Extreme and in the Airport Utility, BUT I never got confirmation of a successful installation. Nevertheless, the connection was established because the wifi network exist.
Do I have to "disable the WAN port" during the installation of the remote Airport to avoid the problems?.
Best Regards,
Fernando

Airport express connection to existing DLink wireless network & old iMac

I have an old iMac (G4 800 mhz). I don't want to buy an old Airport card -- would rather connect to my existing wireless (DLink) network with an Airport Express. Is this possible? Can I go from my cable modem to my DLink wireless router to an Airport Express AND from the Airport Express to my old iMac with an 10/100 Base T Ethernet connection? Essentially will the Airport Express act like an external Airport card? Thanks for any help you can provide... gmosfd
iMac G4 800 mhz Mac OS X (10.4.3)

I bought the old version Airport on line -- the new one will not work with this model of iMac, bummer!

Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access? Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

Thanks for the help. Looked but not clear on what I am trying to do as being possible. Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it?
I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located. Would prefer to replace Linksys with all Apple, but just not possible financially yet. Thanks for the help.

If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

IMac will no longer connect to my Airport wireless network

I set up a wireless network at home using Airport Express some time ago, but as of yesterday my iMac will no longer connect to it. The name of the wireless network still appears in the list of visible networks but when I try to connect it just times out. The iMac is only about 12 feet away from the Airport Express access point, and both my MBP and my iPhone are both able to connect as normal without a problem, but the iMac will no longer connect. I have made no changes at all to the network, or the iMac - it just no longer connects. Any help would be much appreciated.
Jason.

If everything else is connecting with no issues, I would go into the wifi setting on the iPad and redo the info there, user, password and anything else related to your wifi at your house.
It is possible whatever he reset may have reset something to default setting which will not allow it to connect. If you need too then verify the wifi setting by comparing it with another device setting that works on your home network.
Good luck

Solution for Connecting iMac to Uverse Wireless Network?

Similar Messages

Maybe you are looking for