Solution for Data transfer from Non-network location

If i  needed 10 non-networked locations around Australia to submit data (say text files ranging from 20 - 100 mb each) each day to my server, and the data loaded and manipulated into a database in a secure environment, would you be able to describe the key points and a possible solution to this problem ?

Hi Amar,
FTP [File Transfer Protocol] alone isnu2019t a viable option to give the insight, security, performance, and, ultimately, the risk mitigation necessary to responsibly conduct business.One of the solution to protecting and transferring sensitive or mission-critical data securely is Managed File Transfer (MFT). Managed File Transfer solutions provide a greater level of security, meet strict regulatory compliance standards and give you the reliability you need in a data transfer solution.
Points to look for in a solution:
a.  Providing file transfer transparency throughout your entire organization.
b. Solution should support the most modern security standards and methodology including SSL encryption, X.509 certificates and proxy certificates.
c. The solution should streamline the audit process while also being able to access that audit information from a central point, saving you time and money.
d. Solution should include functionality that allows data to be pre-and post-processed.
e.  Solutions should ensure that all interrupted file transfers resume where they left off after a connection failure without manual intervention.
f. Should tightly integrate with your existing job scheduling solution to issue alerts if connections are not re-established after an acceptable time interval.
g. Should adhere to current security and audit requirements including SOX, GLBA and HIPAA.
Hope this helps.
Regards,
Jimmy

Similar Messages

  • What movment types used for stock transfer from Non-WM sloc to WM sloc?

    Hello experts,
    Can some one tell me , what movment types used for stock transfer from Non-WM sloc to WM sloc in the same plant through MB1B?
    Thanks

    Hi
    When I try to use the Movement Type 311 with Tcode MB1B, in order to move the stock from IM storage Locations to WM storage Locations, I do create the Material Document Successfully, but when I try to convert the Material Document to Transfer Order, I get the message "select atleast one storage type first", but there is no storage type appearing on the screen.
    Can you please help me to resolve the above issue.
    Thanks.

  • Scenario for data transfer from CRM to BW

    Hi Guru's,
    Could any one tell me what kind of scenario (e.g. file to file, Idoc to file etc) is used to transfer the data between the following systems using XI interface:
    Also, tell me how we can do it......
    1. CRM to BW
    2. Informatica to BW
    3. R3 to BW
    4. Oracle to BW
    Thanks in advance.  I will assign you the points
    Regards,

    Hi Bharath,
    it mainly depends on:
    1) what you have to transfer, custom data, standard data (for SAP business logic e.g. customer/delivery)
    2) how you need the transfer mode to be (synch/asynch)
    3) the volume of data
    4) the frequency of data transfer
    Consider that a typical scenario for interfacing SAP systems like CRM/R3 with XI is mainly based on IDocs/RFCs/proxy,..
    In general when communicating from XI to BW you should prefer Proxy (the first link explains in details why).
    I suggest you to have a look at these links:
    How to Push Data into BW from XI
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
    How to do BW - XI scenario
    How to do BW - XI scenario.
    XI-BI Integration
    /people/kamaljeet.kharbanda/blog/2005/09/16/xi-bi-integration
    Re: SAP BI and SAP XI integration
    BI-XI Integration
    Informatica to BW
    http://www.informatica.com/FR/solutions/integration/sap/informatica_sap_bw.pdf
    Getting data from external system
    Getting data from external system
    Real World Scenarios of SAP XI
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e17fdb90-0201-0010-2cb6-fe937f3bfd97#search=%22CRM%20to%20XI%20scenario%20site%3Asdn.sap.com%22
    CRM - XI integration
    XI to CRM XIF Connection
    Kind Regards,
    Sergio

  • Using iPod for data transfer from windows to a Mac... is this possible?

    ok here's the situation.
    my room mate has a (video) iPod 30G colour screen and everything. she has downloaded a show (not from iTunes) on her laptop using windows. We want to use her iPod to transfer the data from that show onto my computer which is an iMac G5 Intel Core Duo.
    We connected the iPod to my computer but it was not recognized. Is this because her iPod is formatted for Windows or is there possibly another reason?
    if anyone could help that would be great.
    thanks

    From what I know, windows will not recognize the complicated data of a mac formatted device; hence not recognizing it. Macs can recognize a windows formated ipod though, so if you decide to reformat it on windows, then you can use it on both computers. If you dont though, looks like you are out of luck, sorry.
    Hope I helped.

  • Use of Shared Variables for data transfer from a RT traget to a desktop application

    Hi,
    I want to adopt the shared variables to share data in an existing distributed application comparable with the T3 Benchmark configuration in this document:
    [1] http://zone.ni.com/devzone/conceptd.nsf/webmain/5B4C3CC1B2AD10BA862570F2007569EF
    The current implementation uses a well tuned solution with RT FIFOs and TCP/IP communication with a desktop-PC which monitors and stores the data.
    The desktop application runs with a much slower execution rate than the TCL. So the TCP/IP packets are used to buffer the data with a package size dependent on the data send rate.
    To use the shared variables instead of this RT FIFO + TCP/IP implementation I need to read the shared vairable buffer at once each time the desktop application reads the shared variable.
    But according to this quotation from [1]:
    "With buffering, you can account for temporary fluctuations between read/write rates of a variable. Readers that occasionally read a variable slower than the writer can miss some updates."
    this seems to be impossible. Am I right?
    Are there any suggestions to circumvent this problem? Or are shared variables not made to share data between unsynchronized processes without data loss?
    Regards Till

    You can use the error-cluster to detect the end of your queue. The erroroutput of the shared variable will return a -2220 Warning, if it reads a value it has read already before. I attached a modified example and saved it for 8.2 I hope you can open it.
    Attachments:
    readbuffered82.zip ‏51 KB

  • TB/TB Cable for Data transfer from Mini to MBP

    I have a Mini w/ TB for display and am wondering if I should get the TB/TB cable so that data from mini can be transfered to new MBP?
    Would Air Drop, FW800, or Etheret cable, be faster?

    I believe TB is the fastest.

  • Error in RBDMIDOC report run in E-REC, for data transfer from HR to EREC system

    Hi,
    We are on EHP5, EREC 605, SP0007. EREC is on a standalone, separate instance. HR in a separate instance.
    We have created new org.units & positions, which we are trying to move from HR to EREC system for starting the EREC process.
    In the report message type, gave input "HRMD_ABA", The output throws this error. (Screenshot attached)
    Please provide your helps on the reasons for the error and corrective action to be taken.
    Regards,
    ER.

    Thank Nicole for the reply.
    Just extending my query,
    I have  created newly 2 org.units & 2 positions under the org.units in HR system.I
    If i want to create a requisition as a recruiter from EREC portal,  for that newly created vacant positions, what needs to be done?
    How  to move that new vacant org.unit with position to EREC system ?
    Should I run the org.unit with positions using PFAL (Insert/update mode) or use RBDMIDOC method ?
    Look for inputs.
    Regards,
    ER.

  • Help for data transfer from HCM to E-recruiting

    Hello,
    I have to set up integration of our e-recruiting system with SAP Organizational Management in HCM (we configured e-recruiting on a separate instance).
    As I am novice in the used technologies (RFC and ALE), I ask for your help. Points will be given for everyone who give me some help.
    <b>The first step is to create an RFC connection</b>.
    I am in transaction sm59 in the HCM system in order to create the RFC connection. Which kind of RFC connection I have to create? (ABAP connection, Internet  connection, Logical connection, TCP/IP connection or connection via abap driver ?)
    Thanks a lot for your help.
    Jerome.

    Checl this thread for information on ALE.
    Re: ALE
    Regards,
    Amit
    Reward all helpful replies.

  • Data transfer from sap r/3 into excel sheet for mi01

    hi gurus,
       as i  am a xi consultant i got requirement to write a program for data transfer from sap r/3 into excel sheet for MI01.can any body help me by giving sample code or example for this requirement.please help me.

    Hi Rohit,
    This is an upload program and it has used both function modules to upload from an excel to R3 and to download from R3 onto excel.
    GUI_UPLOAD
    GUI_DOWNLOAD
    are the function modules used.
    Hope this helps,
    *Output:        Downloads error records onto presentation server,
    *               Displays report with number of success and error records
    REPORT ZMCG047CONTR NO STANDARD PAGE HEADING
                                   LINE-SIZE 255
                                   MESSAGE-ID ZM.
    *&       Table declarations
    TABLES : T001W,     "Plants/Branches
             T024E,     "Purchasing Organizations
             T001.      "Company Codes
    *              TYPE-POOLS  DECLARATION
    TYPE-POOLS : SLIS.
    *                       Types  Declaration                            *
    TYPES: BEGIN OF T_RECORD,    "record storing contract info
            LIFNR(010),      "Vendor Number
            EVART(004),      "Agreement Type
            EKORG(004),      "Purchasing Organization
            EKGRP(003),      "Purchasing Group
            WERKS(004),      "Plant
            LGORT(004),      "Storage Location
            KDATB(010),      "Valid start Date
            KDATE(010),      "Valid End Date
            ZTERM(004),      "Payment Terms
            KTWRT(020),      "Target Value
            EPSTP(001),      "Item Category
            EMATN(018),      "Material Number
            KTMNG(017),      "Target Quantity
            NETPR(014),      "Net Price
            PEINH(006),      "Net Price Unit
            BPRME(003),      "Net Price Order Price Unit
            IDNLF(035),      "Vendor Material number
            WEBRE(001),      "GR Based-IV
            MEPRF(001),      "Pricing Date Category
            LTEX1(040),      "Info Text
            DATAB(010),      "Valid From
            DATBI(010),      "Valid To
            KSCHL(004),      "Condition Type
            KBETR(016),      "Condition Rate if scale is not given
            KONWA(005),      "Currency
            KPEIN(005),      "Condition Pricing Unit
            KMEIN(003),      "Condition Unit of Measure
            KSTBM(019),      "Scale
            KBETR_01(016),   "Scale Rate
            DEL_FLAG,        "Delete Flag Indicator
            ERR_MSG(100),    "Error Message
          END OF T_RECORD,
          BEGIN OF T_ERR_RECORD,   "to have error records stored
             LIFNR(010),      "Vendor Number
             EVART(004),      "Agreement Type
             EKORG(004),      "Purchasing Organization
             EKGRP(003),      "Purchasing Group
             WERKS(004),      "Plant
             LGORT(004),      "Storage Location
             KDATB(010),      "Valid start Date
             KDATE(010),      "Valid End Date
             ZTERM(004),      "Payment Terms
             KTWRT(020),      "Target Value
             EPSTP(001),      "Item Category
             EMATN(018),      "Material Number
             KTMNG(017),      "Target Quantity
             NETPR(014),      "Net Price
             PEINH(006),      "Net Price Unit
             BPRME(003),      "Net Price Order Price Unit
             IDNLF(035),      "Vendor Material number
             WEBRE(001),      "GR Based-IV
             MEPRF(001),      "Pricing Date Category
             LTEX1(040),      "Info Text
             DATAB(010),      "Valid From
             DATBI(010),      "Valid To
             KSCHL(004),      "Condition Type
             KBETR(016),      "Condition Rate if scale is not given
             KONWA(005),      "Currency
             KPEIN(005),      "Condition Pricing Unit
             KMEIN(003),      "Condition Unit of Measure
             KSTBM(019),      "Scale
             KBETR_01(016),   "Scale Rate
             DEL_FLAG,        "Delete Flag Indicator
             ERR_MSG(100),    "Error Message
          END OF T_ERR_RECORD,
          BEGIN OF T_LOEKZ,    "To have deletion indicators for materials
              LOEKZ(001),    "Deletion indicator in purchasing document
              EMATN(018),    "Material Number
              WERKS(004),    "Plant
              LGORT(004),    "Storage Location
              BSTYP(001),    "Purchasing document category
          END OF T_LOEKZ,
          BEGIN OF T_MATNR,  " Type definition to store details of materials
               MATNR(018),    "Material Number
          END OF T_MATNR,
          BEGIN OF T_T001,   " Type definition for company codes
              BUKRS(004),    " Company Code
          END OF T_T001,
          BEGIN OF T_ZMVXREF,   "Cross-Reference table type
              D_ALTKN(10),      "Legacy Vendor Number
              D_BUKRS(4),       "Legacy Company Code
              M_ALTKN(10),      "SAP Company Code
          END OF T_ZMVXREF,
          BEGIN OF T_LFA1,    "Master data of vendors
              LIFNR(10),      "Vendor Number
          END OF T_LFA1,
    *  Type Declaration for T024E (Company Codes)
           BEGIN OF T_T024E,
             EKORG   LIKE   T024E-EKORG,     "Purchasing organization
             BUKRS   LIKE   T024E-BUKRS,     "Company Code
           END OF T_T024E,
    *  Type Declaration for t001w (Plant)
           BEGIN OF T_T001W,
             WERKS  LIKE  T001W-WERKS,            "Plant
           END OF T_T001W,
    *  Type Declatation for String Line
           BEGIN OF T_STR1,                                     "#EC NEEDED
             SLINE(6000) TYPE C,
           END OF T_STR1.
    TYPES:  BEGIN OF T_BDCDATA.  "BDC Data
            INCLUDE STRUCTURE BDCDATA.
    TYPES:  END OF T_BDCDATA.
    *       Internal Tables  Declaration                                  *
    DATA:
    *      Internal table to store input file data
           I_RECORD TYPE STANDARD TABLE OF T_RECORD INITIAL SIZE 0,
    *      Internal table to capture errors
           I_ERR_REC TYPE STANDARD TABLE OF T_ERR_RECORD INITIAL SIZE 0,
    *      Internal table to check for deletion indicators
           I_LOEKZ TYPE STANDARD TABLE OF T_LOEKZ INITIAL SIZE 0,
    *      Internal table to check for material numbers
           I_MATNR TYPE STANDARD TABLE OF T_MATNR INITIAL SIZE 0,
    *      Internal table used for storing Cross-Reference data of Vendor
           I_ZMVXREF TYPE STANDARD TABLE OF T_ZMVXREF INITIAL SIZE 0,
    *      Internal table for holding Vendor Numbers from Master table
           I_LFA1 TYPE STANDARD TABLE OF T_LFA1 INITIAL SIZE 0,
    *      Internal table for holding Purchase Org and Company Codes
           I_T024E TYPE STANDARD TABLE OF T_T024E INITIAL SIZE 0,
    *      Internal table for holding Plants
           I_T001W TYPE STANDARD TABLE OF T_T001W INITIAL SIZE 0,
    *      Internal table for storing a list of Company Codes
           I_T001 TYPE STANDARD TABLE OF T_T001 INITIAL SIZE 0,
    *      Internal table used for ALV Reporting
           I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
    *      Internal table used for holding List Header
           I_LISTHEADER TYPE SLIS_T_LISTHEADER,    "EC NEEDED
    *      Internal table to hold ALV Event
           I_ALV_EVENT TYPE SLIS_T_EVENT,
    *      Internal table to hold Sort Info for ALV Report
           I_SORT TYPE SLIS_T_SORTINFO_ALV,
    *      Internal table for BDC Data
           I_BDCDATA TYPE STANDARD TABLE OF T_BDCDATA INITIAL SIZE 0,
    *      Internal table for messages
           I_MESSTAB TYPE TABLE OF BDCMSGCOLL,
    *      Internal table for String line
           I_STR1 TYPE STANDARD TABLE OF T_STR1 INITIAL SIZE 0.
    *       Work Area Declaration                                         *
    DATA:
    *  Work Area to hold data for the Open Contract
          WA_RECORD TYPE T_RECORD,
    *  Work Area to hold previous record data
          WA_RECORDPREV TYPE T_RECORD,
    *  Work Area to hold errors
          WA_ERR_REC TYPE T_ERR_RECORD,
    *  Work Area to hold the Deletion Indicator of materials
          WA_LOEKZ TYPE T_LOEKZ,
    *  Work Area to hold Material numbers of required materials
          WA_MATNR TYPE T_MATNR,      "EC NEEDED
    *  Work Area to hold errors occured while performing BDC
          WA_MESSTAB TYPE BDCMSGCOLL,
    *  Work Area to hold field catalog for ALV Reports
          WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
    *  Work Area to hold list header data for ALV reports
          WA_LISTHEADER TYPE SLIS_LISTHEADER,
    *  Work Area to hold ALV Event
          WA_ALV_EVENT LIKE LINE OF I_ALV_EVENT,  "EC NEEDED
    *  Work Area to hold Layout of ALV Report
          WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
    *  Work Area to hold Cross-Reference data of Vendor
          WA_ZMVXREF TYPE T_ZMVXREF,
    *  Work Area to hold Vendor Numbers from Master table
          WA_LFA1 TYPE T_LFA1,    "EC NEEDED
    *  Work Area to hold Purchase Org and Company Codes
          WA_T024E TYPE T_T024E,
    *  Work Area to hold Company Codes
          WA_T001 TYPE T_T001,
    *  Work Area to hold Plants
          WA_T001W TYPE T_T001W,
    *  Work Area to hold Sort Info for ALV Report
          WA_SORT TYPE SLIS_SORTINFO_ALV,
    *  Work Area to hold BDC Data
          WA_BDCDATA TYPE T_BDCDATA,
    *  Work Area for String line
          WA_STR1 TYPE T_STR1.
    *       Variables  Declaration                                        *
    DATA: V_ERRMSG(500),           "To temporarily store the error message
          V_CONV_DATE(10) TYPE C,  "To capture the converted date format
          V_DATE LIKE SY-DATUM,
          V_REPID LIKE SY-REPID,   "holds report id
          V_CROSS_REFERENCE_ERROR TYPE I,  " cross-reference error
          V_INPUTERROR_FLAG VALUE '',      " input error status
          V_FILENAME TYPE STRING,          " File Name
          VEN_FLAG(1),                       " at new status
          MAT_FLAG(1),                      " at new status
          V_IND(2) TYPE N,                 " index of table control
          V_IND2(2) TYPE N,                " index of table control
          V_IND3(2) TYPE N,                " index of table control
          V_EVRTP1(20),
          V_EPSTP1(20),
          V_EMATN1(20),
          V_KTMNG1(20),
          V_NETPR1(20),
          V_PEINH1(20),
          V_BPRME1(20),
          V_TCSELFLAG1(20),
          V_KSCHL2(20),
          V_KBETR2(20),
          V_KONWA2(20),
          V_KPEIN2(20),
          V_KMEIN2(20),
          V_SELKZ2(20),
          V_KBETR3(20),
          V_KSTBM3(20),
          V_LINE TYPE I,
          V_STR TYPE X VALUE '09',
          V_EXIST TYPE C,
          V_EXIST1 TYPE C,
          V_ISDIR TYPE C,
          V_ISDIR1 TYPE C.
    *       Constants  Declaration                                        *
    CONSTANTS: C_TCODE(5) VALUE 'ME31K', "Trx code - Open Contract Creation
               C_TRUE     VALUE 'X',       " Del_Flag indicator
               C_LOEKZ_MARKED VALUE 'X',   "Deletion indicator for material
               C_INPUTERROR_FLAG_YES VALUE 'X',  "Input File Indicator
               C_VEN_ERR1 VALUE 1,    "Error Indicator
               C_16(2)    VALUE '16',
               C_VEN_ERR2 VALUE 2,    "Error Indicator
               C_VEN_ERR3 VALUE 3,    "Error Indicator
               C_VEN_SUCS VALUE 0,    "Success Indicator
               C_SUCCESS  LIKE SY-SUBRC VALUE '0',
               C_STRUE    VALUE 'S',  "Del_flag for SAP Errors
               C_YTRUE    VALUE 'Y',  "Del_flag for Success Records
               C_MSGTYP_E VALUE 'E',  "holds error message type
               C_MSGTYP_S VALUE 'S',  "holds success message type
               C_BSTYP    VALUE 'K',  "Purchasing Document type is Contract
               C_BACKGROUND VALUE 'N', "Background mode
               C_FOREGROUND VALUE 'A', "All Screen mode
               C_ERRORS   VALUE 'E',   "Error screen mode
               C_WK(2)    VALUE 'WK'. "Value Contract
    *        Selection Screen                                             *
    SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-033.
    SELECTION-SCREEN SKIP.
    SELECT-OPTIONS:
    *              Plant
                   S_WERKS FOR T001W-WERKS OBLIGATORY,
    *              Purchase Organization
                   S_EKORG FOR T024E-EKORG OBLIGATORY.
    *              Company Code
    PARAMETER      P_BUKRS LIKE T001-BUKRS OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN ULINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN POSITION 3.
    PARAMETER RB_SERVE RADIOBUTTON GROUP RBX DEFAULT 'X' USER-COMMAND U1.
    SELECTION-SCREEN COMMENT 6(19)  TEXT-036.
    SELECTION-SCREEN POSITION 37.
    PARAMETER RB_LOCAL RADIOBUTTON GROUP RBX.
    SELECTION-SCREEN COMMENT 40(13) TEXT-035.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN SKIP.
    PARAMETERS:
    *    Parameter holding Input File name
              P_FILE LIKE RLGRAP-FILENAME
                     OBLIGATORY
                     LOWER CASE
                     DEFAULT 'C:\'
                     MODIF ID G1,
              P_FILE1 LIKE RLGRAP-FILENAME
                      OBLIGATORY
                      LOWER CASE
                      DEFAULT '/celestica/interface/corp/in/work/'
                      MODIF ID G2,
    *    Parameter specifying Mode of calling the Transaction.
              P_MODE DEFAULT 'N' OBLIGATORY,
    *    Check box used to test the input file.
              P_TEST AS CHECKBOX DEFAULT 'X',
    *    Parameter holding Filename for holding Input File Errors
              P_IPERR LIKE RLGRAP-FILENAME
                      OBLIGATORY
                      LOWER CASE
                      DEFAULT 'C:\'
                      MODIF ID G1,
              P_IPERR1 LIKE RLGRAP-FILENAME
                     OBLIGATORY
                     LOWER CASE
                     DEFAULT '/celestica/interface/corp/in/work/047_Err.txt'
                     MODIF ID G2.
    SELECTION-SCREEN END OF BLOCK B2.
    *        AT Selection Screen  Events                                  *
    *  Loop the screen to activate relative paths
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF RB_SERVE = C_TRUE AND SCREEN-GROUP1 = 'G1'.
          SCREEN-OUTPUT = 0.
          SCREEN-ACTIVE = 0.
          SCREEN-INPUT = 0.
        ELSEIF RB_LOCAL = C_TRUE AND SCREEN-GROUP1 = 'G2'.
          SCREEN-OUTPUT = 0.
          SCREEN-ACTIVE = 0.
          SCREEN-INPUT = 0.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    AT SELECTION-SCREEN ON BLOCK B2.
    *  Checking Access Authorization for the user
      CALL FUNCTION 'ZU_DATA_ACCESS_AUTH_CHECK'
           EXPORTING
                ACTVT        = C_16
                P_BUKRS      = P_BUKRS
           TABLES
                S_WERKS      = S_WERKS
                S_EKORG      = S_EKORG
           EXCEPTIONS
                BUKRS_FAILED = 1
                VKORG_FAILED = 2
                VTWEG_FAILED = 3
                EKORG_FAILED = 4
                WERKS_FAILED = 5
                LGNUM_FAILED = 6
                OTHERS       = 7.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    AT SELECTION-SCREEN ON P_BUKRS.
      IF NOT P_BUKRS IS INITIAL.
        SELECT SINGLE BUKRS INTO T001
                            FROM T001
                            WHERE BUKRS EQ P_BUKRS.
        IF SY-SUBRC NE 0.
          MESSAGE I000 WITH TEXT-089.
          STOP.
        ENDIF.
      ENDIF.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
    * Search Help to select Input File path.
      PERFORM GET_FILE_NAME USING P_FILE.
    * Check for the existence of the file.
      IF RB_LOCAL EQ C_TRUE.
        CALL FUNCTION 'TMP_GUI_GET_FILE_EXIST'
             EXPORTING
                  FNAME          = P_FILE
             IMPORTING
                  EXIST          = V_EXIST
                  ISDIR          = V_ISDIR
             EXCEPTIONS
                  FILEINFO_ERROR = 1
                  OTHERS         = 2.
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        IF V_ISDIR IS INITIAL.
          IF V_EXIST IS INITIAL.
            MESSAGE I000 WITH TEXT-018.
            STOP.
          ENDIF.
        ELSEIF V_ISDIR EQ C_TRUE.
          MESSAGE I000 WITH TEXT-068.
          STOP.
        ENDIF.
      ENDIF.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_IPERR.
    * Search Help to select Input Error File path.
      PERFORM GET_FILE_NAME USING P_IPERR.
    AT SELECTION-SCREEN.
    * Validate Transaction Mode
      IF  P_MODE <> C_BACKGROUND AND
          P_MODE <> C_FOREGROUND AND
          P_MODE <> C_ERRORS.
        MESSAGE I000 WITH TEXT-034.
        STOP.
      ENDIF.
    START-OF-SELECTION.
    * Get the Input File Data
      V_FILENAME = P_FILE.
      PERFORM UPLOAD_FLATFILE_DATA TABLES I_RECORD
                                   USING V_FILENAME.
    * Sorting the data by all fields
      SORT I_RECORD.
    * Ensuring the padding of the empty spaces before the vendor No
      CLEAR WA_RECORD.
      LOOP AT I_RECORD INTO WA_RECORD.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
                  INPUT  = WA_RECORD-LIFNR
             IMPORTING
                  OUTPUT = WA_RECORD-LIFNR.
        MODIFY I_RECORD FROM WA_RECORD
                        INDEX SY-TABIX
                        TRANSPORTING LIFNR.
        CLEAR WA_RECORD.
      ENDLOOP.
    * Input file validation
      PERFORM VALIDATE_FLATFILE_DATA.
      IF P_TEST = C_TRUE.
        IF I_ERR_REC[] IS INITIAL.
          MESSAGE I000 WITH TEXT-032.
          STOP.
        ELSE.
    *  Display all the error records at the input level.
          PERFORM DISPLAY_INPERR_RECORDS.
    *  Download Error File
          PERFORM DOWNLOAD_ERROR_FILE.
        ENDIF.
      ELSE.
    * Build BDC Data
        PERFORM BUILD_BDC_DATA.
    * Download Error File
        PERFORM DOWNLOAD_ERROR_FILE.
    * Display the status report.
        PERFORM DISPLAY_PROCESSED_RECORDS.
      ENDIF.
    END-OF-SELECTION.
      REFRESH:  I_RECORD,
                I_ERR_REC,
                I_LOEKZ,
                I_MATNR,
                I_ZMVXREF,
                I_LFA1,
                I_T024E,
                I_FIELDCAT,
                I_LISTHEADER,
                I_ALV_EVENT,
                I_SORT,
                I_BDCDATA,
                I_MESSTAB,
                I_STR1.
      FREE: I_RECORD,
            I_ERR_REC,
            I_LOEKZ,
            I_MATNR,
            I_ZMVXREF,
            I_LFA1,
            I_T024E,
            I_FIELDCAT,
            I_LISTHEADER,
            I_ALV_EVENT,
            I_SORT,
            I_BDCDATA,
            I_MESSTAB,
            I_STR1.
    *&      Form  GET_file_name
    *       Fetches the file and path from the presentation system
    *  -->  p1        Path along with the file name
    FORM GET_FILE_NAME USING L_FILE LIKE RLGRAP-FILENAME.
      CALL FUNCTION 'WS_FILENAME_GET'
           EXPORTING
                MASK             = ',*.TXT,*.txt.'
                MODE             = 'O'
                TITLE            = TEXT-011
           IMPORTING
                FILENAME         = L_FILE
           EXCEPTIONS
                INV_WINSYS       = 1
                NO_BATCH         = 2
                SELECTION_CANCEL = 3
                SELECTION_ERROR  = 4
                OTHERS           = 5.
      CASE SY-SUBRC.
        WHEN 1.
          MESSAGE I000 WITH TEXT-084.
          STOP.
        WHEN 2.
          MESSAGE I000 WITH TEXT-085.
          STOP.
        WHEN 3.
          MESSAGE I000 WITH TEXT-086.
          STOP.
        WHEN 4.
          MESSAGE I000 WITH TEXT-087.
          STOP.
      ENDCASE.
    ENDFORM.                    " GET_file_name
    *&      Form  upload_flatfile_data
    *       Uploading data from Flat File
    FORM UPLOAD_FLATFILE_DATA
                          TABLES I_L_RECORD STRUCTURE WA_RECORD
                          USING L_FILENAME TYPE STRING.
      DATA WA_L_RECORD TYPE T_RECORD.
    * Upload the Flat file data
      IF RB_LOCAL EQ C_TRUE. "File is on the Local System
        CALL FUNCTION 'GUI_UPLOAD'
             EXPORTING
                  FILENAME                = L_FILENAME
                  FILETYPE                = 'ASC'
                  HAS_FIELD_SEPARATOR     = 'X'
             TABLES
                  DATA_TAB                = I_L_RECORD
             EXCEPTIONS
                  FILE_OPEN_ERROR         = 1
                  FILE_READ_ERROR         = 2
                  NO_BATCH                = 3
                  GUI_REFUSE_FILETRANSFER = 4
                  INVALID_TYPE            = 5
                  NO_AUTHORITY            = 6
                  UNKNOWN_ERROR           = 7
                  BAD_DATA_FORMAT         = 8
                  HEADER_NOT_ALLOWED      = 9
                  SEPARATOR_NOT_ALLOWED   = 10
                  HEADER_TOO_LONG         = 11
                  UNKNOWN_DP_ERROR        = 12
                  ACCESS_DENIED           = 13
                  DP_OUT_OF_MEMORY        = 14
                  DISK_FULL               = 15
                  DP_TIMEOUT              = 16
                  OTHERS                  = 17.
        CASE SY-SUBRC.
          WHEN 0.
            DESCRIBE TABLE I_L_RECORD LINES V_LINE.
            IF V_LINE EQ 0.
              MESSAGE I000 WITH TEXT-065.
              STOP.
            ENDIF.
          WHEN 1.
            MESSAGE I000 WITH TEXT-068.
            STOP.
          WHEN 2.
            MESSAGE I000 WITH TEXT-069.
            STOP.
          WHEN 3.
            MESSAGE I000 WITH TEXT-070.
            STOP.
          WHEN 4.
            MESSAGE I000 WITH TEXT-071.
            STOP.
          WHEN 5.
            MESSAGE I000 WITH TEXT-072.
            STOP.
          WHEN 6.
            MESSAGE I000 WITH TEXT-073.
            STOP.
          WHEN 7.
            MESSAGE I000 WITH TEXT-074.
            STOP.
          WHEN 8.
            MESSAGE I000 WITH TEXT-075.
            STOP.
          WHEN 9.
            MESSAGE I000 WITH TEXT-076.
            STOP.
          WHEN 10.
            MESSAGE I000 WITH TEXT-077.
            STOP.
          WHEN 11.
            MESSAGE I000 WITH TEXT-078.
            STOP.
          WHEN 12.
            MESSAGE I000 WITH TEXT-079.
            STOP.
          WHEN 13.
            MESSAGE I000 WITH TEXT-080.
            STOP.
          WHEN 14.
            MESSAGE I000 WITH TEXT-081.
            STOP.
          WHEN 15.
            MESSAGE I000 WITH TEXT-082.
            STOP.
          WHEN 16.
            MESSAGE I000 WITH TEXT-083.
            STOP.
        ENDCASE.
        CLEAR V_LINE.
      ELSEIF RB_SERVE EQ C_TRUE. "File is on the Application Server
        P_MODE = C_BACKGROUND.
        OPEN DATASET P_FILE1 FOR INPUT IN TEXT MODE.
        CHECK SY-SUBRC EQ C_SUCCESS.
        CLEAR WA_STR1.
        DO.
          READ DATASET P_FILE1 INTO WA_STR1.
          IF SY-SUBRC <> 0.      " NE SUCCESS.
            EXIT.
          ELSEIF SY-SUBRC EQ C_SUCCESS.
            APPEND WA_STR1 TO I_STR1.
            CLEAR WA_STR1.
          ENDIF.                  " ENDIF on SY-SUBRC 0 Check.
        ENDDO.                    " ENDDO
        DELETE I_STR1 WHERE SLINE EQ ' '.
        DESCRIBE TABLE I_STR1 LINES V_LINE.
        IF V_LINE EQ 0.
          MESSAGE S000 WITH TEXT-065.
          STOP.
        ENDIF.
        LOOP AT I_STR1 INTO WA_STR1.
          CLEAR: WA_L_RECORD.
          SPLIT WA_STR1-SLINE AT V_STR
          INTO WA_L_RECORD-LIFNR
               WA_L_RECORD-EVART
               WA_L_RECORD-EKORG
               WA_L_RECORD-EKGRP
               WA_L_RECORD-WERKS
               WA_L_RECORD-LGORT
               WA_L_RECORD-KDATB
               WA_L_RECORD-KDATE
               WA_L_RECORD-ZTERM
               WA_L_RECORD-KTWRT
               WA_L_RECORD-EPSTP
               WA_L_RECORD-EMATN
               WA_L_RECORD-KTMNG
               WA_L_RECORD-NETPR
               WA_L_RECORD-PEINH
               WA_L_RECORD-BPRME
               WA_L_RECORD-IDNLF
               WA_L_RECORD-WEBRE
               WA_L_RECORD-MEPRF
               WA_L_RECORD-LTEX1
               WA_L_RECORD-DATAB
               WA_L_RECORD-DATBI
               WA_L_RECORD-KSCHL
               WA_L_RECORD-KBETR
               WA_L_RECORD-KONWA
               WA_L_RECORD-KPEIN
               WA_L_RECORD-KMEIN
               WA_L_RECORD-KSTBM
               WA_L_RECORD-KBETR_01
               WA_L_RECORD-DEL_FLAG
               WA_L_RECORD-ERR_MSG.
          APPEND WA_L_RECORD TO I_L_RECORD.
          CLEAR: WA_L_RECORD,
                  WA_STR1.
        ENDLOOP.
        REFRESH I_STR1.
        CLOSE DATASET P_FILE1.
      ENDIF.
    ENDFORM.
    *&      Form  BDC_DYNPRO
    *       Data populated into i_bdcdata table for program
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
      CLEAR WA_BDCDATA.
      WA_BDCDATA-PROGRAM  = PROGRAM.
      WA_BDCDATA-DYNPRO   = DYNPRO.
      WA_BDCDATA-DYNBEGIN = C_TRUE.
      APPEND WA_BDCDATA TO I_BDCDATA.
    ENDFORM.
    *&      Form  BDC_FIELD
    *       Data populated into i_bdcdata table for fields
    FORM BDC_FIELD USING FNAM FVAL.
      CLEAR WA_BDCDATA.
      WA_BDCDATA-FNAM = FNAM.
      WA_BDCDATA-FVAL = FVAL.
      APPEND WA_BDCDATA TO I_BDCDATA.
    ENDFORM.
    *&      Form  convert_date
    *       Converting the data from the file format to mm/dd/yyyy format
    *      <--P_wa_record_kdatb  Source Date
    *      <--p_l_conv_date      Target Date
    FORM CONVERT_DATE USING L_DATE
                            L_TAR_DATE.
      CONCATENATE L_DATE+0(2)
                  L_DATE+3(2)
                  L_DATE+6(4)
                  INTO L_TAR_DATE.
    ENDFORM.                    " convert_date
    *&      Form  validate_flatfile_data
    *       Validating the input file
    FORM VALIDATE_FLATFILE_DATA.
      DATA: L_TODAY LIKE SY-DATUM,
            L_STARTDATE_C LIKE SY-DATUM,
            L_ENDDATE_C LIKE SY-DATUM,
            L_ENDDATE_C1 LIKE SY-DATUM,
            L_STARTDATE_C1 LIKE SY-DATUM,
            L_STARTDATE(8),
            L_ENDDATE(8).
    * Fetch indicator for all records on the material, plant & storage
    * location combination.
      IF NOT I_RECORD[] IS INITIAL.
        REFRESH I_LOEKZ.
        SELECT EMATN            " Material Number
               WERKS            " Plant
               LGORT            " Storage Location
               BSTYP            " Purchasing Document Category
               LOEKZ            " Deletion indicator
          INTO TABLE I_LOEKZ
          FROM EKPO
          FOR ALL ENTRIES IN I_RECORD
          WHERE EMATN = I_RECORD-EMATN
            AND WERKS = I_RECORD-WERKS
            AND LGORT = I_RECORD-LGORT
            AND BSTYP = C_BSTYP
            AND LOEKZ = C_LOEKZ_MARKED.
        IF SY-SUBRC EQ 0.
          SORT I_LOEKZ BY EMATN WERKS LGORT BSTYP LOEKZ.
        ENDIF.
    * Fetching Plants for all entries in the selection screen
        REFRESH I_T001W.
        SELECT WERKS  "Plant
            INTO TABLE I_T001W
            FROM T001W
            WHERE WERKS IN S_WERKS.
        IF SY-SUBRC EQ 0.
          SORT I_T001W BY WERKS.
        ENDIF.
    * Fetching materials for the plants listed in flat file
        REFRESH I_MATNR.
        SELECT MATNR          " Material Number
          INTO TABLE I_MATNR
          FROM MARC
          FOR ALL ENTRIES IN I_RECORD
          WHERE WERKS = I_RECORD-WERKS.
        IF SY-SUBRC EQ 0.
          SORT I_MATNR BY MATNR.
        ENDIF.
    * Fetching Company Codes for repective Purchase Organizations
        REFRESH I_T024E.
        SELECT EKORG       "  Purchase Organization
               BUKRS       "  Company Code
            INTO TABLE I_T024E
            FROM T024E
            WHERE EKORG IN S_EKORG.
        IF SY-SUBRC EQ 0.
          SORT I_T024E BY EKORG.
        ENDIF.
    * Fetching SAP Data using Legacy Data.
        REFRESH I_ZMVXREF.
        SELECT D_ALTKN
               D_BUKRS
               M_ALTKN
            INTO TABLE I_ZMVXREF
            FROM ZMVXREF
            FOR ALL ENTRIES IN I_RECORD
            WHERE D_ALTKN = I_RECORD-LIFNR.
        IF SY-SUBRC EQ 0.
          SORT I_ZMVXREF BY D_ALTKN D_BUKRS.
        ENDIF.
    * Fetching Vendors from LFA1
        IF NOT I_ZMVXREF[] IS INITIAL.
          REFRESH I_LFA1.
          SELECT LIFNR
             INTO TABLE I_LFA1
             FROM LFA1
             FOR ALL ENTRIES IN I_ZMVXREF
             WHERE LIFNR = I_ZMVXREF-M_ALTKN.
          IF SY-SUBRC EQ 0.
            SORT I_LFA1 BY LIFNR.
          ENDIF.
        ENDIF.
    * Start Validating the flat file
        CLEAR: WA_RECORD,
               WA_T024E,
               WA_ZMVXREF,
               WA_LFA1,
               WA_LOEKZ,
               WA_MATNR.
        LOOP AT I_RECORD INTO WA_RECORD.
          L_TODAY = SY-DATUM.
          L_STARTDATE = WA_RECORD-KDATB.
          L_ENDDATE = WA_RECORD-KDATE.
          IF WA_RECORD-DEL_FLAG IS INITIAL.
            READ TABLE I_T001W INTO WA_T001W
                               WITH KEY WERKS = WA_RECORD-WERKS
                               BINARY SEARCH.
            IF SY-SUBRC EQ 0.
    *   Cross-Reference check performed for the given Vendors
              READ TABLE I_T024E INTO WA_T024E
                                 WITH KEY EKORG = WA_RECORD-EKORG
                                 BINARY SEARCH.
              IF SY-SUBRC NE 0.
                V_CROSS_REFERENCE_ERROR = C_VEN_ERR3.
              ELSE.
                READ TABLE I_ZMVXREF INTO WA_ZMVXREF
                            WITH KEY D_ALTKN = WA_RECORD-LIFNR
                                     D_BUKRS = P_BUKRS
                            BINARY SEARCH.
                IF SY-SUBRC EQ 0.
                  READ TABLE I_LFA1 INTO WA_LFA1
                             WITH KEY LIFNR = WA_ZMVXREF-M_ALTKN
                             BINARY SEARCH.
                  IF SY-SUBRC EQ 0.
                    V_CROSS_REFERENCE_ERROR = C_VEN_SUCS.
                  ELSE.
                    V_CROSS_REFERENCE_ERROR = C_VEN_ERR2.
                  ENDIF.
                ELSE.
                  V_CROSS_REFERENCE_ERROR = C_VEN_ERR1.
                ENDIF.
              ENDIF.
    * Legacy Vendor could not be mapped
              IF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR1.
            V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inp.file err. occurd
                WA_RECORD-DEL_FLAG = C_TRUE.
                WA_RECORD-ERR_MSG = TEXT-007.
                MODIFY I_RECORD FROM WA_RECORD
                                TRANSPORTING DEL_FLAG
                                             ERR_MSG
                                WHERE LIFNR = WA_RECORD-LIFNR.
    * Legacy Vendor is mapped but the obtained SAP vendor doesn't exist.
              ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR2.
    *           Inp.file err. occurd
                V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
                WA_RECORD-DEL_FLAG = C_TRUE.
                WA_RECORD-ERR_MSG = TEXT-008.
                MODIFY I_RECORD FROM WA_RECORD
                                TRANSPORTING DEL_FLAG
                                             ERR_MSG
                                WHERE LIFNR = WA_RECORD-LIFNR.
    * Purchase Organization doesn't exist in T024E.
              ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR3.
    *             Inp.file err. occurd
                V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
                WA_RECORD-DEL_FLAG = C_TRUE.
                WA_RECORD-ERR_MSG = TEXT-014.
                MODIFY I_RECORD FROM WA_RECORD
                                TRANSPORTING DEL_FLAG
                                             ERR_MSG
                                WHERE EKORG = WA_RECORD-EKORG.
    * Vendor is mapped and validated successfully
              ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_SUCS.
    * Checking for the deletion indicator for that record
                CONCATENATE WA_RECORD-KDATB+6(4)
                            WA_RECORD-KDATB+3(2)
                            WA_RECORD-KDATB+0(2)
                            INTO
                            L_STARTDATE.
                MOVE L_STARTDATE TO L_STARTDATE_C.
                CONCATENATE WA_RECORD-KDATB+6(4)
                            WA_RECORD-KDATB+0(2)
                            WA_RECORD-KDATB+3(2)
                            INTO
                            L_STARTDATE_C1.
                CONCATENATE WA_RECORD-KDATE+6(4)
                            WA_RECORD-KDATE+3(2)
                            WA_RECORD-KDATE+0(2)
                            INTO
                            L_ENDDATE.
                MOVE L_ENDDATE TO L_ENDDATE_C.
                CONCATENATE WA_RECORD-KDATE+6(4)
                            WA_RECORD-KDATE+0(2)
                            WA_RECORD-KDATE+3(2)
                            INTO
                            L_ENDDATE_C1.
                READ TABLE I_LOEKZ INTO WA_LOEKZ WITH KEY
                                                 EMATN = WA_RECORD-EMATN
                                                 WERKS = WA_RECORD-WERKS
                                                 LGORT = WA_RECORD-LGORT
                                                 BINARY SEARCH.
                IF SY-SUBRC EQ 0.
    *             Inpfle err.occured
                  V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
                  WA_RECORD-ERR_MSG = TEXT-003.
                  WA_RECORD-DEL_FLAG = C_TRUE.    "marking the record
                  MODIFY I_RECORD FROM WA_RECORD
                                  TRANSPORTING DEL_FLAG
                                                ERR_MSG
                                  WHERE LIFNR = WA_RECORD-LIFNR
                                    AND EVART = WA_RECORD-EVART
                                    AND EKORG = WA_RECORD-EKORG
                                    AND EKGRP = WA_RECORD-EKGRP
                                    AND WERKS = WA_RECORD-WERKS
                                    AND LGORT = WA_RECORD-LGORT
                                    AND KDATB = WA_RECORD-KDATB
                                    AND KDATE = WA_RECORD-KDATE
                                    AND ZTERM = WA_RECORD-ZTERM
                                    AND KTWRT = WA_RECORD-KTWRT
                                    AND EPSTP = WA_RECORD-EPSTP
                                    AND EMATN = WA_RECORD-EMATN.
    * Validating the Purchasing Organization for Blank/Null
                ELSEIF WA_RECORD-EKORG IS INITIAL.
    *             Inpfle err.occured
                  V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
                  WA_RECORD-ERR_MSG = TEXT-010.
                  WA_RECORD-DEL_FLAG = C_TRUE.
                  MODIFY I_RECORD FROM WA_RECORD
                                  TRANSPORTING DEL_FLAG
                                               ERR_MSG
                                  WHERE LIFNR = WA_RECORD-LIFNR
                                    AND EVART = WA_RECORD-EVART
                                    AND EKORG = WA_RECORD-EKORG
                                    AND EKGRP = WA_RECORD-EKGRP
                                    AND WERKS = WA_RECORD-WERKS
                                    AND LGORT = WA_RECORD-LGORT
                                    AND KDATB = WA_RECORD-KDATB
                                    AND KDATE = WA_RECORD-KDATE
                                    AND ZTERM = WA_RECORD-ZTERM
                                    AND KTWRT = WA_RECORD-KTWRT
                                    AND EPSTP = WA_RECORD-EPSTP
                                    AND EMATN = WA_RECORD-EMATN.
    * Validating the Plant for Blank/Null
                ELSEIF WA_RECORD-WERKS IS INITIAL.
    *             Inpfle err.occured
                  V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
                  WA_RECORD-ERR_MSG = TEXT-039.
                  WA_RECORD-DEL_FLAG = C_TRUE.
                  MODIFY I_RECORD FROM WA_RECORD
                                  TRANSPORTING DEL_FLAG
                                               ERR_MSG
                                  WHERE LIFNR = WA_RECORD-LIFNR
                                    AND EVART = WA_RECORD-EVART
                                    AND EKORG = WA_RECORD-EKORG
                                    AND EKGRP = WA_RECORD-EKGRP
                                    AND WERKS = WA_RECORD-WERKS
                                    AND LGORT = WA_RECORD-LGORT
                                    AND KDATB = WA_RECORD-KDATB
                                    AND KDATE = WA_RECORD-KDATE
                                    AND ZTERM = WA_RECORD-ZTERM
                                    AND KTWRT = WA_RECORD-KTWRT
                                    AND EPSTP = WA_RECORD-EPSTP
                                    AND EMATN = WA_RECORD-EMATN.
    * Validating the Contract Validity Start Date
                ELSEIF L_STARTDATE_C1 GT L_TODAY.             "#EC PORTABLE
    *             Inpfle err.occured
                  V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
                  WA_RECORD-ERR_MSG = TEXT-004.
                  WA_RECORD-DEL_FLAG = C_TRUE.      "marking the record
                  MODIFY I_RECORD FROM WA_RECORD
                                  TRANSPORTING DEL_FLAG
                                               ERR_MSG
                                  WHERE LIFNR = WA_RECORD-LIFNR
                                    AND EVART = WA_RECORD-EVART
                                    AND EKORG = WA_RECORD-EKORG
                                    AND EKGRP = WA_RECORD-EKGRP
                                    AND WERKS = WA_RECORD-WERKS
                                    AND LGORT = WA_RECORD-LGORT
                                    AND KDATB = WA_RECORD-KDATB.
    * Validating the Contract Validity End Date
                ELSEIF L_ENDDATE_C1 LE L_TODAY.               "#EC PORTABLE
    *             Inpfle err.ocrd
                  V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
                  WA_RECORD-ERR_MSG = TEXT-005.
                  WA_RECORD-DEL_FLAG = C_TRUE.    "marking the record
                  MODIFY I_RECORD FROM WA_RECORD
                                  TRANSPORTING DEL_FLAG
                                               ERR_MSG
                                  WHERE LIFNR = WA_RECORD-LIFNR
                                    AND EVART = WA_RECORD-EVART
                                    AND EKORG = WA_RECORD-EKORG
                                    AND EKGRP = WA_RECORD-EKGRP
                                    AND WERKS = WA_RECORD-WERKS
                                    AND LGORT = WA_RECORD-LGORT
                                    AND KDATB = WA_RECORD-KDATB
                                    AND KDATE = WA_RECORD-KDATE.
    * Checking for Material under the Plant for Agreement Type 'WK'
                ELSEIF WA_RECORD-EVART = C_WK.
                  READ TABLE I_MATNR INTO WA_MATNR
                                     WITH KEY MATNR = WA_RECORD-EMATN
                                     BINARY SEARCH.
                  IF SY-SUBRC NE 0.
                 V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inpfle err.ocrd
                    WA_RECORD-ERR_MSG = TEXT-006.
                    WA_RECORD-DEL_FLAG = C_TRUE.   "marking the record
                    MODIFY I_RECORD FROM WA_RECORD
                                    TRANSPORTING DEL_FLAG
                                                 ERR_MSG
                                    WHERE LIFNR = WA_RECORD-LIFNR
                                      AND EVART = WA_RECORD-EVART
                                      AND EKORG = WA_RECORD-EKORG
                                      AND EKGRP = WA_RECORD-EKGRP
                                      AND WERKS = WA_RECORD-WERKS
                                      AND LGORT = WA_RECORD-LGORT
                                      AND KDATB = WA_RECORD-KDATB
                                      AND KDATE = WA_RECORD-KDATE
                                      AND ZTERM = WA_RECORD-ZTERM
                                      AND KTWRT = WA_RECORD-KTWRT
                                      AND EPSTP = WA_RECORD-EPSTP
                                      AND EMATN = WA_RECORD-EMATN.
                  ENDIF.
                ENDIF.  " checking of deletion indicator
              ENDIF.   " checking for success of vendor cross reference
            ELSE.
              V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inpfle err.ocrd
              WA_RECORD-ERR_MSG = TEXT-041.
              WA_RECORD-DEL_FLAG = C_TRUE.   "marking the record
              MODIFY I_RECORD FROM WA_RECORD
                              TRANSPORTING DEL_FLAG
                                           ERR_MSG
                              WHERE WERKS = WA_RECORD-WERKS.
            ENDIF. " Plant checked to selection screen
          ENDIF.  " the records for which del_flag is initial
          CLEAR: WA_RECORD,
                 WA_T024E,
                 WA_ZMVXREF,
                 WA_LFA1,
                 WA_LOEKZ,
                 WA_MATNR,
                 L_TODAY,
                 L_STARTDATE_C,
                 L_ENDDATE_C,
                 L_STARTDATE,
                 L_ENDDATE.
        ENDLOOP.
        LOOP AT I_RECORD INTO WA_RECORD.
          IF WA_RECORD-DEL_FLAG = C_TRUE.
            APPEND WA_RECORD TO I_ERR_REC.
            CLEAR WA_RECORD.
          ENDIF.
        ENDLOOP.
      ELSE.
        MESSAGE E000 WITH TEXT-013.  " no records in the flat file
        STOP.
      ENDIF.
    ENDFORM.                    " validate_flatfile_data
    *&      Form  DOWNLOAD_ERROR_FILE
    *       Downloads all records along with the records encountering the
    *       input file validation error
    FORM DOWNLOAD_ERROR_FILE.
      DATA L_ISDIR TYPE C.
      IF V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
        V_FILENAME = P_IPERR.
    * Check for the existence of the file.
        IF RB_LOCAL EQ C_TRUE.
          CALL FUNCTION 'TMP_GUI_GET_FILE_EXIST'
               EXPORTING
                    FNAME          = P_IPERR
               IMPORTING
                    ISDIR          = L_ISDIR
               EXCEPTIONS
                    FILEINFO_ERROR = 1
                    OTHERS         = 2.
          IF SY-SUBRC <> 0.
            MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
          IF L_ISDIR EQ C_TRUE.
            MESSAGE I000 WITH TEXT-088.
            STOP.
          ENDIF.
        ENDIF.
        IF RB_LOCAL EQ C_TRUE.
    * Download the Input Error File.
          CALL FUNCTION 'GUI_DOWNLOAD'
               EXPORTING
                    FILENAME                = V_FILENAME
                    FILETYPE                = 'ASC'
                    WRITE_FIELD_SEPARATOR   = '#'
               TABLES
                    DATA_TAB                = I_ERR_REC
               EXCEPTIONS
                    FILE_WRITE_ERROR        = 1
                    NO_BATCH                = 2
                    GUI_REFUSE_FILETRANSFER = 3
                    INVALID_TYPE            = 4
                    NO_AUTHORITY            = 5
                    UNKNOWN_ERROR           = 6
                    HEADER_NOT_ALLOWED      = 7
                    SEPARATOR_NOT_ALLOWED   = 8
                    FILESIZE_NOT_ALLOWED    = 9
                    HEADER_TOO_LONG         = 10
                    DP_ERROR_CREATE         = 11
                    DP_ERROR_SEND           = 12
                    DP_ERROR_WRITE          = 13
                    UNKNOWN_DP_ERROR        = 14
                    ACCESS_DENIED           = 15
                    DP_OUT_OF_MEMORY        = 16
                    DISK_FULL               = 17
                    DP_TIMEOUT              = 18
                    FILE_NOT_FOUND          = 19
                    DATAPROVIDER_EXCEPTION  = 20
                    CONTROL_FLUSH_ERROR     = 21
                    OTHERS                  = 22.
          IF SY-SUBRC <> 0.
            MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
        ELSEIF RB_SERVE EQ C_TRUE.
          OPEN DATASET P_IPERR1 FOR OUTPUT IN TEXT MODE.
          CHECK SY-SUBRC EQ 0.
          CLEAR WA_ERR_REC.
          LOOP AT I_ERR_REC INTO WA_ERR_REC.
            IF WA_ERR_REC-DEL_FLAG = C_TRUE.
              TRANSFER WA_ERR_REC TO P_IPERR1.
            ENDIF.
            CLEAR WA_ERR_REC.
          ENDLOOP.
          CLOSE DATASET P_IPERR1.
        ENDIF.
      ENDIF.
    ENDFORM.                    " DOWNLOAD_ERROR_FILE
    *&      Form  BUILD_BDC_DATA
    * Populates BDC for all the fields neccessary for Open Contract Creation
    FORM BUILD_BDC_DATA.
      DATA: L_MAT_INDEX TYPE I,
            L_CON_INDEX TYPE I,
            L_SCA_INDEX TYPE I.
      CLEAR   WA_BDCDATA.
      REFRESH: I_BDCDATA,
               I_MESSTAB.
    * Processing the bdc
      CLEAR: WA_RECORD,
             WA_RECORDPREV,
             VEN_FLAG,
             MAT_FLAG.
      LOOP AT I_RECORD INTO WA_RECORD.
    *    Checks for the del_flag of the record.
        IF     WA_RECORD-DEL_FLAG EQ C_TRUE
            OR WA_RECORD-DEL_FLAG EQ C_STRUE.
          CLEAR WA_RECORD.
          CONTINUE.
        ELSE.
          IF  WA_RECORDPREV-LIFNR NE WA_RECORD-LIFNR
           OR WA_RECORDPREV-EVART NE WA_RECORD-EVART
           OR WA_RECORDPREV-EKORG NE WA_RECORD-EKORG
           OR WA_RECORDPREV-EKGRP NE WA_RECORD-EKGRP
           OR WA_RECORDPREV-WERKS NE WA_RECORD-WERKS
           OR WA_RECORDPREV-LGORT NE WA_RECORD-LGORT
           OR WA_RECORDPREV-KDATB NE WA_RECORD-KDATB
           OR WA_RECORDPREV-KDATE NE WA_RECORD-KDATE
           OR WA_RECORDPREV-ZTERM NE WA_RECORD-ZTERM
           OR WA_RECORDPREV-KTWRT NE WA_RECORD-KTWRT.
            PERFORM BDC_DYNPRO      USING 'SAPMM06E' '0200'.
            PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                          'RM06E-LGORT'.
            PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                          '/00'.
    *   Cross-Reference check performed for the given Vendors
            CLEAR WA_T024E.
            READ TABLE I_T024E INTO WA_T024E
                               WITH KEY EKORG = WA_RECORD-EKORG
                               BINARY SEARCH.
            IF SY-SUBRC EQ 0.
              CLEAR WA_ZMVXREF.
              READ TABLE I_ZMVXREF INTO WA_ZMVXREF
                          WITH KEY D_ALTKN = WA_RECORD-LIFNR
                                   D_BUKRS = P_BUKRS
                          BINARY SEARCH.
              IF SY-SUBRC EQ 0.
                PERFORM BDC_FIELD   USING 'EKKO-LIFNR'
                                           WA_ZMVXREF-M_ALTKN.
              ENDIF.
              CLEAR WA_ZMVXREF.
            ENDIF.
            CLEAR WA_T024E.
            PERFORM BDC_FIELD       USING 'RM06E-EVART'
                                          WA_RECORD-EVART.
            PERFORM BDC_FIELD       USING 'EKKO-EKORG'
                                          WA_RECORD-EKORG.
            PERFORM BDC_FIELD       USING 'EKKO-EKGRP'
                                          WA_RECORD-EKGRP.
            PERFORM BDC_FIELD       USING 'RM06E-WERKS'
                                          WA_RECORD-WERKS.
            PERFORM BDC_FIELD       USING 'RM06E-LGORT'
                                          WA_RECORD-LGORT.
            PERFORM BDC_DYNPRO      USING 'SAPMM06E' '0201'.
            PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                          'EKKO-KTWRT'.
            PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                          '=AB'.
            PERFORM CONVERT_DATE USING WA_RECORD-KDATB V_CONV_DATE.
            PERFORM BDC_FIELD       USING 'EKKO-KDATB'
                                          V_CONV_DATE.
            PERFORM CONVERT_DATE USING WA_RECORD-KDATE V_CONV_DATE.
            PERFORM BDC_FIELD       USING 'EKKO-KDATE'
                                          V_CONV_DATE.
            PERFORM BDC_FIELD       USING 'EKKO-ZTERM'
                                          WA_RECORD-ZTERM.
            PERFORM BDC_FIELD       USING 'EKKO-KTWRT'
                                            WA_RECORD-KTWRT.
            VEN_FLAG = 1.
            L_MAT_INDEX = 1. "index for table-control of material
          ENDIF.
    *          "first check for itemline
          IF  WA_RECORDPREV-EPSTP NE WA_RECORD-EPSTP
           OR WA_RECORDPREV-EMATN NE WA_RECORD-EMATN
           OR WA_RECORDPREV-KTMNG NE WA_RECORD-KTMNG
           OR WA_RECORDPREV-NETPR NE WA_RECORD-NETPR
           OR WA_RECORDPREV-PEINH NE WA_RECORD-PEINH
           OR WA_RECORDPREV-BPRME NE WA_RECORD-BPRME
           OR WA_RECORDPREV-IDNLF NE WA_RECORD-IDNLF
           OR WA_RECORDPREV-WEBRE NE WA_RECORD-WEBRE
           OR WA_RECORDPREV-MEPRF NE WA_RECORD-MEPRF
           OR WA_RECORDPREV-LTEX1 NE WA_RECORD-LTEX1
           OR VEN_FLAG EQ 1.
            V_IND = L_MAT_INDEX.
            IF V_IND GT 1.
              V_IND = 2.
            ENDIF.
            CONCATENATE 'RM06E-EVRTP(' V_IND ')' INTO V_EVRTP1.
            CONCATENATE 'RM06E-EPSTP(' V_IND ')' INTO V_EPSTP1.
            CONCATENATE 'EKPO-EMATN(' V_IND ')' INTO V_EMATN1.
            CONCATENATE 'EKPO-KTMNG(' V_IND ')' INTO V_KTMNG1.
            CONCATENATE 'EKPO-NETPR(' V_IND ')' INTO V_NETPR1.
            CONCATENATE 'EKPO-PEINH(' V_IND ')' INTO V_PEINH1.
            CONCATENATE 'EKPO-BPRME(' V_IND ')' INTO V_BPRME1.
            CONCATENATE 'RM06E-TCSELFLAG(' V_IND ')' INTO V_TCSELFLAG1.
            PERFORM BDC_DYNPRO      USING 'SAPMM06E' '0220'.
            PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                          '=NP'.
            PERFORM BDC_DYNPRO      USING 'SAPMM06E' '0220'.
            PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                          V_EVRTP1.
            PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                          '=DETA'.
            PERFORM BDC_FIELD       USING V_EPSTP1
                                          WA_RECORD-EPSTP.
            PERFORM BDC_FIELD       USING V_EMATN1
                                          WA_RECORD-EMATN.
            PERFORM BDC_FIELD       USING V_KTMNG1
                                          WA_RECORD-KTMNG.
            PERFORM BDC_FIELD       USING V_NETPR1
                                          WA_RECORD-NETPR.
            PERFORM BDC_FIELD       USING V_PEINH1
                                          WA_RECORD-PEINH.
            PERFORM BDC_FIELD       USING V_BPRME1
                                          WA_RECORD-BPRME.
            PERFORM BDC_DYNPRO      USING 'SAPMM06E' '0211'.
            PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                          'EKPO-WEBRE'.
            PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                          '=DETZ'.
            PERFORM BDC_FIELD       USING 'EKPO-IDNLF'
                                          WA_RECORD-IDNLF.
            TRANSLATE WA_RECORD-EVART TO UPPER CASE.
            IF WA_RECORD-EVART EQ C_WK.
              PERFORM BDC_FIELD       USING 'EKPO-WEBRE' 'X'.
            ENDIF.
            PERFORM BDC_DYNPRO      USING 'SAPMM06E' '0212'.
            PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                          'EKPO-MEPRF'.
            PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                          '=TXP'.
            PERFORM BDC_FIELD       USING 'EKPO-MEPRF'
                                          WA_RECORD-MEPRF.
            IF NOT WA_RECORD-LTEX1 IS INITIAL. "NE space.
              PERFORM BDC_DYNPRO      USING 'SAPMM06E' '0106'.
              PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                            'RM06E-SELKZ(02)'.
              PERFORM BDC_FIELD 

  • Candidate Data transfer from E-Recruiting System to HR system for New Hiring.

    Hi All,
    Hope everyone doing in good Spirit.
    We are implementing E-Recruiting as Standalone for one of our client.
    Can any please help me in regards with Data transfer from E-Rec System to HR System for hiring once the candidate has been successfully completed recruiting process.
    You inputs are highly appreciable.
    Thank you.
    Sekhar.

    Hello Sekhar,
    there are three different scenarios for transferring the data of an external candidate to the HR core for hiring.
    the easiest and most commonly used is the RFC connection. When creating an activity of category data transfer the data of the candidate is transferred from eRec to HR core. There it is stored in table T752F. Then you can run transaction PA48. There you can select the candidate and run a hiring action. This is the same action like in PA40 only the system will preset the fields with the values from eRec (similar to batch input).
    Instead of using the RFC solution you can transfer the data using PI (this can be activated using a switch in T77S0). To be honest none of my customers is using this. Either they had no PI server at all or they did not use it for eRec
    The third was delivered with a business function HCM_HIRE_INT_CI_1. This is based on HCM processes and forms and targeted towards customers using Talent Management Core (e.g. data for education and work experience is transferred into the TM Core infotypes 740X as contrary to the hr core standard infotypes 0022 and 0023 they are structured like the eRec ones). Of course as you can do a lot of customer enhancements to HCMP&F you can replace the behavior nearly completely. One or two of my clients discussed this solution but as far as I know none is actually using it.
    The simple truth is most customers seem to not use any integration at all. The first solution is easy to activate but only covers around 13 fields. Compared to a real full blow hiring action this is not even 10% of the fields which have to be entered. So the presetting this small number of fields is not a great help especially as you have to check every information anyways. Furthermore PA48 is not very nice and lacks functions to structure the incoming records which makes it difficult to handle in large distributed organizations.
    The other two options require a lot of infrastructure for small functionality. What we discussed with a client was using the new hire integration to preset a full hiring form with eRec data and then send to the candidate as offline form to gather all missing information and use this for hiring. But there were to many issues on data privacy aspects when sending a form with social security data, bank account data, etc. via email. Furthermore they required actual signatures.
    Kind regards
    Roman  

  • Requirement date in reservation for Stock transfer from one storage locatio

    Hi ALL,
    I have activated the resevration creation  by MRP for stock transfer from mail ware house to service storage location  by creating MRP area for service storage location  when there is requiremnt from service and when MRP is run on the MRP area the resevration in created and trasnfer order is created .but the requiremnt date in reservation is not the same asd of on service order.so kindly let me know why it is ahppening.

    Hi,
    check the GR processing time for the material . System may be adding GR processing time with reservation requirement to arrive at the service delivery date.
    Regards,
    Mrinal

  • Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

    Hi
    Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

    Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
    There are two situations where you can use this depending on the type of client:
    1. To keep inventory reports on a client (that is not an MP), create the following file:
    %systemroot%\ccm\inventory\temp\archive_reports.sms
    2. To keep inventory reports on a MP (that is also a client), create the following file:
    <x>:\sms_ccm\inventory\temp\archive_reports.sms
    The XML file will be saved in the inventory\temp folder.
    More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

  • Movement type for stock transfer from investment order to the regular stock

    Hi,
    Is there any movement type for the transfer from investment order to storage location stock? We have wrong created purchase orders, where the GR transferred the items to the investment orders. The problem is, that there already a lot of invoices posted on this items..
    Is there any clever solution?
    Points granted,
    Saso

    Hi
    In MTO scenario the stocks are manufactured for the particular sales order and in MMBE the stocks are managed as sales order stocks assigned to that particular sales order no
    This is due to the sales order item cat in MTO carrying specal stock indicator as E
    Opening these stocks to unrestricted is meaningless and not possible because costing and all would have been done according to the sales order
    Non MTO scenario
    +Note MTO stocks are different and sales order stocks are different+
    All MTO stocks are managed as sales order stocks
    But not all sales order stocks are MTO stocks
    But if you want move the stocks from a sales order to unrestricted then MB1B movement type 411 E
    Moving stocks from one sales order to another sales order  MB1B movement type 413 E
    Regards
    Raja

  • JPA - Best Practice For Data Transfer?

    I've been considering an alternative method for data transfer between applications, by using Serialized or Encoded to File JPA Entities. (either Binary or XML)
    I know this procedure may have several draw backs as compared to traditional exported SQL queries or data manipulation statements, however, I want to know if anyone has considered or used this process for data transfer?
    The process would be to
    - query the database and load the JPA Entities
    - Serialize or Encode them to file
    - zip up the entire folder with the JPA entities
    - transfer the data to destination machine
    - extract the data to a temp directory
    - reload the JPA entities by de-serializing and persisting them to the database
    The reason I'm considering this process, is basically because I have a desktop application (manages member records, names, dates, contributions, etc) used by different organisations in different locations (which are not related except by purpose ie clubs or churches) and would like to have a simple way of transporting all data associated with a single profile (information about a member of the organisation) from one location to another in a simple way, ie users interact only with the application without the need for any database management tool or such.
    I'm also considering this because it is not easy to generate an SQL Script file without using a dedicated Database Management Tool, which I do not want the application users to have to learn how to use.
    I would appreciate ANY suggestions and probable alternative solutions for this problem. FYI: I'm using a Java DB database.
    ICE

    jschell wrote:
    In summary you are moving data from one database to another. True
    You only discussed flow one way. Well the process is meant to be bi-directional. Basically what I envision would to have something like:
    - the user goes to File -> Export Profile...
    - then selects one or more profiles to export
    - the export process completes and the zip archive is created and transfered (copied, mailed, etc) to the destination location
    then on the destination pc
    - the user goes to File -> Import Profile
    - selects the profile package
    - the app extracts, processes and imports the data (JPA serialized for example)
    Flow both ways is significantly more complicated in general.Well if well done it shouldn't be
    And what does this have to do with users creating anything?Well as shown above the user would be generating the Zip Archive (assuming that is the final format)
    Does this make the problem clearer?
    ICE

  • Time Machine Data Transfer - From FireWire Drive to Time Capsule - HELP!

    Time Machine Data Transfer - From FireWire Drive to Time Capsule - HELP!
    I've been searching for weeks for a solution to my problem. Here's the story I've come across since I installed Leopard on Oct. 26, 2007.
    I first installed Leopard on my Early 2006 MacBook and set up Time Machine with a 200GB external FireWire drive. Since then, things have been fine, until Time Machine started deleting the oldest backups. I'm a pack-rat and hated this feeling of losing data. So, I now have a few months worth of backups on my 200GB FireWire drive.
    The Time Capsule is released, I finally talk myself into getting one and transferring my old data from the 200GB drive to my 1TB TC.
    I did some researching through forums about how to move data from one Time Machine drive to another, so I took the concept and wanted to apply it to my Time Capsule. I made a DMG image of my 200GB drive, in order to move the data. I figured if I can make an image, copy it, and open it on the Time Capsule - all will go smoothly - just as some had mentioned they've done with external drives.
    Now, I have a 164GB DMG image of my Time Machine, with no hope in sight of gaining it back. I've tried taking the image, using Disk Utility, and restoring my original 200GB external with the imaged Time Machine data, but whenever I do, I come across error messages.
    In Disk Utility, I've done the following steps:
    * Disk Image is found on Time Capsule
    * I select the 200GB drive and select 'Restore'
    * I drag and drop the Disk Image to the 'Image' field
    * I drag and drop the 200GB drive into the the 'Restore' field
    * Select 'Erase Destination'
    * Select 'Restore'
    * I get the warning message that I'll erase the drive - I proceed
    * I enter my password
    Error message pops up:
    "Restore Failure: Could not find any scan information. The source image needs to be imagescanned/scanned for restore."
    I select the image in Disk Utility, then proceed with the following steps:
    * Click on "Image" then down to "Scan Image for Restore"
    * I enter my password
    After hours of waiting, I get another error message:
    "Unable to scan. (Broken pipe)."
    I'm going to see, after transferring the DMG to the Time Capsule, if I can drag-and-drop the files from the Time Capsule drive onto the 200GB hard drive.
    IF anyone has any more suggestions, please let me know!

    32 updates on this Mac since December 2007 - Hardware, software, OS...
    They keep coming at about 6 or 7 a month. Some of them I don't care about, but several are essential. 10.5.3 has been seeded to the testers a couple of times and will probably show up in the next few weeks. Jaguar wasn't worth a d*mn until 10.2.6, Panther about 10.3.4, Tiger about 10.4.4 - I'd say we are ahead or on schedule Too bad I can't get Apple to fix Spaces. I wish they'd focus on what I want but I guess some take more time than others.
    2007-12-18 00:32:39 -0800: Installed "GarageBand Update" (4.1.1)
    2007-12-18 00:32:43 -0800: Installed "QuickTime Broadcaster" (1.5.2)
    2007-12-18 00:33:07 -0800: Installed "Security Update 2007-009" (1.0)
    2007-12-18 00:33:29 -0800: Installed "QuickTime" (7.3.1)
    2007-12-19 09:32:03 -0800: Installed "MacBook MacBook Pro Software Update" (1.1)
    2007-12-23 23:57:32 -0800: Installed "Security Update 2007-009" (1.1)
    2008-01-16 09:18:07 -0800: Installed "iMovie Update" (7.1.1)
    2008-01-16 09:18:14 -0800: Installed "Front Row Update" (2.1.2)
    2008-01-16 09:18:45 -0800: Installed "iTunes" (7.6)
    2008-01-16 09:19:31 -0800: Installed "QuickTime" (7.4)
    2008-01-29 21:33:14 -0800: Installed "Keynote Update" (4.0.2)
    2008-01-29 21:33:23 -0800: Installed "Pages Update" (3.0.2)
    2008-01-29 21:33:31 -0800: Installed "Numbers Update" (1.0.2)
    2008-02-02 01:18:43 -0800: Installed "iWeb Update" (2.0.3)
    2008-02-05 20:12:17 -0800: Installed "iPhoto Update" (7.1.2)
    2008-02-15 09:03:49 -0800: Installed "iLife Support" (8.2)
    2008-02-15 09:04:17 -0800: Installed "QuickTime" (7.4.1)
    2008-02-15 09:04:51 -0800: Installed "Leopard Graphics Update" (1.0)
    2008-02-19 23:44:37 -0800: Installed "Keyboard Firmware Update" (1.0)
    2008-02-25 19:24:33 -0800: Installed "iTunes" (7.6.1)
    2008-03-03 17:14:18 -0800: Installed "GarageBand Update" (4.1.2)
    2008-03-03 17:14:31 -0800: Installed "iPhoto Update" (7.1.3)
    2008-03-12 18:11:36 -0700: Installed "AirPort Utility" (5.3.1)
    2008-03-18 10:03:57 -0700: Installed "Safari" (3.1)
    2008-03-20 13:00:58 -0700: Installed "Security Update 2008-002" (1.0)
    2008-03-20 13:01:04 -0700: Installed "Time Machine and AirPort Updates" (1.0)
    2008-03-21 22:49:16 -0700: Installed "Digital Camera RAW Compatibility Update" (2.0)
    2008-04-03 00:50:22 -0700: Installed "Front Row Update" (2.1.3)
    2008-04-03 00:50:50 -0700: Installed "QuickTime" (7.4.5)
    2008-04-03 00:51:58 -0700: Installed "iTunes" (7.6.2)
    2008-04-08 17:16:02 -0700: Installed "Keynote Update" (4.0.3)
    2008-04-08 17:16:08 -0700: Installed "MacBook Pro EFI Firmware Update" (1.5)

Maybe you are looking for