Solution for Disappearing Apple TV in iTunes under Devices

I have stumbled accross a weird but real solution to all of you that keep haveing the Apple TV disappear after 15 seconds or so.
I have no idea why this works but it is obviously a bug.
Here you go.
Start iTunes and when you see Apple TV appear under Devices, click it to see it start uploading your content.
Then very quicly open Preferences off the top menu and to to the Apple TV tab. Leave that window open. If you do , the load and sync continues and really works.
Once you shut the window the Apple TV sync will stop and will disappear under devices. This is an obvisou bug, but it works.
Good luck!
Jim

Open the software and change your settings.
You were probably "warned" (loud noise and a window from NetBarrier) advising you that your computer was "under attack" and you blocked the connection when you put it on the "stop" list.

Similar Messages

  • Any solution for 4280 error when using Itunes to burn CDs?

    Any solution for 4280 error when using Itunes to burn CDs?

    http://support.apple.com/kb/TA38101?viewlocale=en_US

  • Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

  • I cannot find apple tv (1st generation) under devices after downloading the latest itunes version

    i cannot find apple tv (1st generation) under devices after downloading the latest itunes version.
    cannot stream any pictures or music
    any suggestions?

    Welcome to the Apple Community.
    If restarting everything including your router doesn't help......
    Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

  • TS1567 i just got a new iphone 5C and it wont show up on itunes under devices. my old iphone and my ipod nano both show up. help!

    i just got a new iphone 5C and it wont show up on itunes under devices. my old iphone and my ipod nano both show up. help! i tried all of the apple 'solutions' and none worked. the only thing i did not do was delete and reinstall itunes because i did not want to lose anything

    As you connect your ipod to iTunes, an option in the upper right of the screen will appear. When you click this, it will show the different menu for your ipod.

  • TS4436 hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

    hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

    If you are using the iPhone camera zoom then remember that this is a digital zoom not an optical zoom. The zoomed in area will have fewer pixels and not appear as clear. The more you zoom the worse it gets. It's like cropping a picture after it has been taken.

  • Can I pay for an Apple License using Itunes Card?

    I am developing an app and wish to release it to the public but my question is inorder to pay for the apple deveopers' license, can i do it using an Itunes card rather than a credit card?

    You have to use a credit card registered in your legal name at your home address.
    There is no other option.

  • Please help me! iPhone original is read by itunes under devices but when i click on it there is just a blank screen? Please help me!

    A few days ago i purchased an original iPhone from my friend that was broken. It would not load past the white apple logo when i turned it on. I put the iPhone in recovery mode and restored it to iOS 3.1.3 and assumed it would work after that. I however, was wrong! The iPhone is currently stuck on the slide for emergency and connect to itunes screen. When i plugged it into the computer and went to itunes, the phone was listed under devices. But when i clicked on it, it just came up with a blank white screen that said iphone in big gray letters. I live in Italy because my father is in the military so therefore i cannot take it to an apple store to ask someone smarter than me for one on one help with this problem. Any help at all would be greatly appreciated i just want to have this phone working again! lol

    Ok!!! I found the way how to do it and everything is fine now. If someone has got the same problem as me you just need to restart your iPad. You hold the Sleep/wake button till the red line comes out then you scrol your finger on it and then after a minute you hold the same button again till the apple sing come out.

  • I downloaded songs to my iPod but i can't see them in iTunes under devices?

    I created a playlist and transferred it to my iPod shuffle, but when I connect the shuffle to iTunes, I can't see the songs listed under Devices/iPod. The only i see is the Software License agreement but I've already agreed & saved this to my PC.

    Sounfs like they are corrupted
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • Looked on ITunes under devices preferences, IPhone shows locked, how can i unlock device backups?

    I have an  IPhone 5 & trying to get my info back that I just lost. Someone advised to look under ITunes Preferences, device backups, however mine is showing my IPhone backup is locked. How do I undo that?

    Hello Paredes-Power,
    Thank you for using Apple Support Communities!
    Here is more info on what you are seeing. It is called an Encrypted backup.
    iTunes: About iOS backups
    http://support.apple.com/kb/HT4946
    iTunes and encrypted backups
    In the iTunes Summary screen, select "Encrypt iPhone backup" if you want to encrypt the information stored on your computer when iTunes makes a backup. Encrypted backups are indicated by a padlock icon, and a password is required to restore the information to iPhone. You may want to write down the password for your backup and store it in a safe place. If you use a Mac, when you set a password you can select to store the password in the keychain. With iOS 4 and later, you can transfer the iOS keychain backup to a new device if you encrypt the backup.
    Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
    If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device
    All the best,
    Sterling

  • Iphone cant be picked up in itunes under devices

    my iphone cannot be picked up under devices on any computer . i have an almost new imac and it wont work on there i want to  pop my photos on the computer HELP

    If your iPhone is not recognised on your Mac follow the article below to try and resolve the issue:
    iOS: Device not recognized in iTunes for Mac OS X
    In terms of importing photos to your Mac the artile below will whos you how:
    iOS: Importing personal photos and videos from iOS devices

  • Why do I have both devices (ipad & iphone) simultaneausly showing up in itunes under "devices" when only the ipad is plugged in?

    WHen I plug my ipad in it will start to sunc and then after a few minutes my iphone will show up under devices. I then get all my iphone data on my ipad as well. Does anyone know how tocorrect this?

    You may have enabled wifi sync on your iPhone.

  • Possible solution for "iPhone not recognized by iTunes" issue (Vista/7)

    This solution is intended for those Vista/Windows 7 users:
    - whose iPhone will not show up as a device in iTunes (usually after upgrading to iTunes 10);
    - whose iPhone is successfully connected to the PC (appears as a device in Windows Explorer);
    - particularly those experiencing the issue where fully uninstalling/reinstalling iTunes will allow it to recognize the iPhone once -- and once only -- but disconnecting the iPhone will cause iTunes to ignore it again (until the next full uninstall/reinstall).
    I know there are plenty of people who fit those criteria, as I've been monitoring the forums for a fix for this for weeks.
    The solution's pretty straight forward:
    1. Disconnect all iPhone/iPod devices and close iTunes
    2. Open Windows Explorer
    3. Navigate to the folder: *C:\ProgramData\Apple Computer\iTunes*
    4. Delete the file: iPodDevices.xml +(I recommend you copy it to the Desktop first, for peace of mind)+
    5. Reconnect your iPhone to the PC and fire up iTunes
    Fingers crossed, your iPhone should now show up as a device in iTunes after a short pause.
    The XML file is recreated each time the iPhone is connected to the PC, so you will need to repeat the file deletion each time you want to sync your phone. So this isn't a permanent fix -- that's up to Apple to fix their buggy application -- only a workaround, but it's a **** sight faster than uninstalling every piece of iTunes-related software each time. (You could even set up a batch file to delete iPodDevices.xml automatically and save the folder navigation.)
    Windows XP users: unfortunately, the ProgramData folder only exists in Windows Vista/7. I don't have a copy of XP to hand to locate it myself, but it's a good bet that the same iPodDevices.xml file exists somewhere on your PC (most likely somewhere under Program Files or Local Settings) and is the culprit if you're experiencing the same problems under XP.
    So far, deleting that file before connecting my phone hasn't failed to work for me (iPhone 3GS, iOS4.1, iTunes 10.0.1.22). YMMV, but go ahead and reply if it works for you too -- it'll help me get a more detailed and coherent bug report to Apple.

    I should also mention: this solution should not be a first step in troubleshooting.
    If you haven't already, try the following steps first -- they're more basic and/or more likely to provide a permanent fix for you:
    1) Try a different USB port. (One on the PC itself; not on a USB hub.)
    2) Try a different USB cable.
    3) Reboot the PC. (Sure you've already tried this, but still...)
    4) Fully uninstall & reinstall iTunes and related software: http://support.apple.com/kb/HT1923
    5) Restart the Apple Mobile Device Service : http://support.apple.com/kb/TS1567
    6) Reinstall/update the Apple Mobile Device Driver: http://support.apple.com/kb/ts1538
    Reinstalling iTunes fully (4) works for many people so be sure to try that, following the sequence on the instruction page. If you're seeing the issue where reinstallation will allow you a one-time sync before iTunes screws up again, I'm pretty confident that following the solution in the first post will work for you.
    PS: Mac users... sorry, I know some of you are seeing the same issue but I don't have the first clue about how iTunes is structured on a Mac. Best case, iPodDevices.xml exists somewhere on your Mac and you can try the same fix... good luck!

  • List of solutions for airplay icon missing in iTunes 11 (windows)

    It seems like there are a lot of problems out there with airplay and iTunes 11.  I think it would be great if Apple or someone were to make some sort of diagnostic tool for airplay.
    I am starting this thread in an attempt to collect some of the various solutions to the airplay problems.  Hopefully, other members of the community will add other solutions that they are aware of.
    Problem: Can't find the airplay icon in iTunes 11 for windows
    1) make sure you are looking in the right place.  The icon will appear to the right of the volume slider in the normal iTunes view.  If iTunes can't find any airplay devices, this icon will not be present and the area will just be blank.
    2) For me (iTunes 11.0.5.5), I did some system work in Windows 8 64-bit, and installed AdAware, and uninstalled it.  I think this reset my firewall settings.  The airplay icon was missing from iTunes but I was able to do airplay from my iPad over the network.  I searched the start menu for "firewall", started "Windows Firewall with Advanced Security", and in the Inbound Rules list I saw that I had 5 entries that started with "Airport".  2 of them were disabled.  I double clicked on each disabled rule, and changed the action from "Block the connection" to "Allow the connection".  After hitting ok and doing this for both blocked rules, I restarted iTunes and the airplay icon appeared and everything works fine.
    3) A popular solution which has worked for me in the past has been to switch the program to miniplayer view.  There you will hopefully see an airplay icon.  Some people say you should select each of the entries in the airplay list here in order to get them to "stick."  When you switch back to normal view, the airplay icon should remain visible.
    4) I have seen someone update their dd wrt (open source based) router firmware and had the problem go away.
    5) Some have had luck unplugging their airplay device (ie: receiver) for a few minutes and then plugging it back in.
    Please add to this list if you can!

    Windows 7 64bit
    iTunes 11.1.2.32
    Apple TV (New Shape) / Airport Express 3rd Gen.
    I've had the issue of no Airplay button for the past few weeks. Strangely, it appeared randomly, but never stuck around for too long before disappearing. However, from reading this thread i uninstalled my wireless driver, and reinstalled from a generic windows search, and also installed Apple's Bonjour service (did this one after the other) and restarted my machine. All seems fine now, and the airplay button is there.
    Thank you all so much for your inputs in helping get a resolution. I hope this works for everyone else with the issue.
    Dan

  • My Solution for iPod Touch 3rdGen not recognized as device in iTunes

    Ok, I tried everything I could, all the recomended solutions including removing itunes completely and re-installing, and nothing worked.  My iPod is recognized on another computer so I figured it to be my computer's setup... or a problem with iTunes.  In desperation I searched on line (google) and found iTunes 9.0.  I removed iTunes completely, re-booted and installed 9.0 and suddenly it worked... sort of...  The iPod Touch needs 10.5 or greater to work... so INSTEAD of removing iTunes 9.0, I did an upgrade to 10.6.1 from within iTunes and when I plugged my iPod back in... IT WORKED !!!!  I figure there was something not quite right about the fresh install from the Apple website, but the upgrade went perfectly.  I can speculate on what it was... I think the upgrade does not remove all the older files but only installs some of the components since it did NOT need to be re-booted after the live upgrade to 10.6.1....  Anyway... After 3 days of pulling my hair out, I'm SOOOOOOOoooooooo happy!!!!!!!!

    So you tried eveything here:
    iOS: Device not recognized in iTunes for Windows
    Did yu already try:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Maybe you are looking for

  • Automatic creation of MS Word Documents within a Report

    Dear Experts, within my report which creates automatically activities in a background process I have to create MS Word Documents and attach this Word Documents to the Activity. The Word Document does have a Logo and the text is changing with every Ac

  • Re-sizing - advice please

    Hi http://www.maxelcat.co.uk/expt/correct_index.html I am re building this site after useful advice reveiced yesterday because I rather foolishly (!) built it using several absolute "layers" (yuk - hate that term). I have done the above with floats t

  • Copying standard DCs pcui_gp~xsfpm and pcui~xssfpm into the localdevelopmet

    Hi Experts, i am trying to develop an FPM application under, local development / Mcomponents. But i dont have the standard DCs pcui_gpxsfpm and pcuixssfpm underlocal development / Mcomponentsto to work on a FPM Application . i have copied the folder

  • Third Party Purchase

    Hi all , As a business requirement we have following process - Retailers raise indent for various products to our company - Our company consolidate all the indents and raise the PO to manufacturer ( vendor )- Vendor will send the delivery directly to

  • Can't delete or set delete flag on PP order

    I want to delete a PP order and it tells me that I cannot select selected assembly order xxxxxx for deletion. The status of the order is REL  MSPT PRT  PRC  RESA SETC.   The production order has no goods movements associated with it , yet I can not d