Solution for Error Code 148:3
So had this error and been looking around to see if I could find a solution on the forums or the support section and could not find a concrete answer. However I did read (here http://forums.adobe.com/message/1659492#1659492) something which reminded me of changes I had made to my boot sequence recently that I decided to check up on.
I try to keep a lean system so I try and turn off services and programs from starting up when I dont need them.
This problem for me has been cause by turning off the "FLEXnet Licensing Service" through msconfig. When it was turned back on and I rebooted problem solved.
For those that are unsure if thats it and dont know what I am on about follow these instructions:
(Warning: If you dont know what your doing with the book sequence or msconfig, follow the instructions and leave everything else alone. Using this tool can cause untold problems if you dont know what your doing and you dont closely follow instructions)
1.- Press "Windows Key" + R on your keyboard or click the Start button (bottom left of screen) and then select Run.
2.- Type "msconfig" (without the quotes) and hit return.
3.- System configuration window will come up, select the Services tab.
4.- Select "Hide all Microsoft Services" and look for "FLEXnet Licensing Service".
5.- Ensure "FLEXnet Licensing Service" is selected
6.- Click Apply and then Close and choose to reboot your machine.
7.- When Windows starts up again there should be a window telling you a change has been made, tick the box so it does not come up again and click ok.
Your problem should be solved, I hope. Worked for me. I also tested it, any time I turn it off Dreamweaver stops working and when its turned back on its fine.
Hope this helps
Ethnod
wow...wssparky thanks a TON. I got the adobe error today and it was driving me INSANE. I *think* the problem had to do with my having to disable all my startup stuff in Windows7 to fix a problem I was having updating some other Microsoft software. Anyway MS said disable everything using the msconfig and it was after that when Adobe stopped functioning (my McAfee is having an issue as well) properly.
At any rate I got the adobe "fix" and it worked GREAT!
I was NOT having any luck to begin with by going to the support area at adobe.com (HEY ADOBE PEOPLE>> TAKE NOTE)
searching "support" for the error code tells me "Your search of Support for error 148:3 did not match any documents." which I find interesting
so I finally googled the error code and found this thread.
now a word to those who are less than kind in their posts and make people feel stupid for asking the question here...I would submit these forums are for us (the users) to help each other (read: be nice to each other) so we can USE the software we OWN.
I'm frankly disappointed that going to the Adobe "SUPPORT" was fruitless. MY problem was with the CS4 suite: I own the master collection which wasn't exactly cheap....it wold be nice if I, as a customer was able to at least FIND Adobe's OWN error code on their support section.
again... thanks to wssparky
Similar Messages
-
Solution for error code: 4SNS/1/40000000/IBOR-9.426
My computer recently has been running at its best. I did a diagnostic and gave me an error code 4SNS/1/40000000/IBOR-9.426. I wanted to get an idea what this means and what is the solution?
That indicates an internal sensor failure. You will have to take your MBP to an Apple store genius bar for repairs.
Ciao. -
Any solutions for error code r6034
anyone find a solution for fixing error code r6034?
Hi fcianci,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
PC , Error code 148:3 " licensing for this product has stopped working"
PC , Error code 148:3 " licensing for this product has stopped working"
Error "Licensing has stopped working" | Windows
-
Error code 148:3 on attempt to open Photoshop
I am getting error code 148:3 on start-up. (So I can't use my program. It sure was expensive enough.)
This has happened before, on the same computer, and an adobe supporter supplied a download which got me working again. But only temporarily, I guess, since now I am getting it again! Arrgh.
This is so not satisfactory. Please let's find a permanent solution to this.
Kindly
MortenLindPlease refer:
http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
Regards,
Ashutosh -
RoboHlp 8. Error code 148:3
RoboHelp 8 has been installed on my computer for years, and I've been using it without problems during this period.
Today I went to use it but it would not start; a dialogue box came up saying 'Licence for product has stopped working' with error code 148:3 being quoted.
I've re-booted and re-tried to start RoboHelp, as recommedndd, but with the same result.
Does anyone know why this has happened, and why the licencing should stop working?It is a standalone licence - but problem now solved.
Seems like the Flexinet (????) service has stopped running.
Found the clue at the link given by:
Error "Licensing has stopped working" | Windows
Thanks for your help -
Unknown reason for error code 36331 in DAC run
Hi,
While running full load i am getting following error
Can any one give me the solution
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_123 -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 01:41:19.126 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status.HI Srini,
I had copied Src files from BIApps to informatica Src file
While running DAC11g full load, we are en counting some issues below is the error we are facing
ERROR CODE - Unknown reason for error code 36331
one more thing to consider, In DAC10g we give /Oracle/OBIAPPS/Informatica/9.1.0/server/infa_shared/SrcFiles as Informatica parameter path in DAC system properties but in DAC11g if i take same path no task is running, it is failing at first task only and no parameter file is generating.
But if i give dafault in that Informatica parameter path of DAC11g some tasks are running success and i am able to see some parameters generated in DAC PATH, but Default is taking
/Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters path for that location.
Informatica Server details are Success, Physical Data sorce are success.
I had copied SrcFiles and LkpFiles to informatica from BIApps.
ParameterDW and parameterOLTP are moved to /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters as well as Informatica Src folder
for one task below is the error
2013-02-07 21:50:17.515 Acquiring Resources
2013-02-07 21:50:17.517 Acquired Resources
2013-02-07 21:50:17.519 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has started.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 21:50:46.989 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status. -
I have Adobe Acrobat Pro and Windows Vista. I am unable to open my Photoshop CS4, error code 148.3. Can you help me resolve this problem?
Hi,
Please try the steps given in following article:
http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
Regards,
Anoop -
Pse8 getting error code 148.3. Why?
am getting error coder 148.3 when I launch editor, Whyband what do I do?
The Photoshop Elements forum is located elsewhere. They can probably better help you.
http://forums.adobe.com/community/photoshop_elements -
Illustrator CS4 - Error Code 148:3
Illustrator CS4 will not open Error Code 148:3 Need Help Please.
Reinstall the program to fix the licensing system.
Mylenium -
I have Illustrator CS4 and it is giving me the Error code: 148:3
I have Illustrator CS4 and it is giving me the Error code: 148:3. I bought it from Adobe several years ago but this is the first time it's given me trouble and I can't seem to find anywhere how to fix it.
vallie babe,
If you have registered the products with Adobe, they should be able to give you the missing (parts of) the registration numbers.
You may try Customer Care,
http://helpx.adobe.com/contact.html
or Adobe Support (phone),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html -
Why do I keep getting the error code 148:3 when I try to start Fireworks CS4?
Why do I keep getting the error code 148:3 when I try to start Fireworks CS4?
I just reinstalled Fireworks CS4 and it seems to be back to normal. Thanks
-
Trying to download free photoshop and received error code 148:3 can you help
Need help tying to download free photoshop and receiving error code 148:3
Something is preventing the licensing from working. Make sure to run with sufficient user privileges and file permissions.
Mylenium -
Oracle Form 9i - How to catch for error code and error message?
Hello:
I'd like to catch for error code such as ORA-20001, ORA-28007 if the form is not success. I tried TOOL_ERR.CODE and TOOL_ERR.MESSAGE, but it returns 0 and no message.
Thanks in advance,
TDI got it.
Thanks,
TD -
Blackberry 9300 solution for mep code (0 left)
Hi
Blackberry 9300 solution for mep code (0 left)
Help me please
Thanks...Hi and Welcome to the Forums!
With zero tries left, there is only one official solution -- sending your BB to the RIM factory to have it totally reset. Your methods of requesting this service are the same as for all BB service...via your wireless service provider. If they refuse or if you have no warranty (due to a variety of reasons, this can be the case), then you must request this via paid incident support:
http://us.blackberry.com/support/programs/technical/incident.jsp
Be advised that, while I have no personal experience with this, it is my opinion that the cost of having this done will exceed the cost of just buying a new BB.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
HTML Signature with logo does not display when read by clients
I have had this problem for a while now. I am using 10.5.6 and Apple Mail to send all of my emails. I have only one signature for my business email account which is a GoogleMail pro account. I have set up a signature to display my business logo which
-
Needs assistance guyz.. I tried so many tricks available in online but nothing works plz help me..
-
No contacts show up after setting up CardDav with gmail- any idea how to fix?
No contacts are showing up after setting up CardDav with gmail. Any idea why? Here is how i setup CardDav (with no success) 1. I removed my old gmail account that was setup with the Exchange protocol, checked that my Exchange-Gmail contacts were no l
-
Hi All , Could you please share documentation or pointer how session management is done in BO (for all the services).How the timeouts work here. & details on memory used per session etc (detailed analysis). Regards , Abhinav
-
UIX: How to build multiple form search result page?
I was wondering what UIX components I should use to build UIX search page that will return results in similar to Amazon.com-search-result-page? Currently UIX search page shows results in a read-only table. I need to display results in more user frien