Solution for error code: 4SNS/1/40000000/IBOR-9.426

My computer recently has been running at its best. I did a diagnostic and gave me an error code 4SNS/1/40000000/IBOR-9.426. I wanted to get an idea what this means and what is the solution?

That indicates an internal sensor failure. You will have to take your MBP to an Apple store genius bar for repairs.
Ciao.

Similar Messages

Extreme Fan Speed (Error Code: 4SNS/1/40000000:Tp0P-131.000)

My 20" 2.4GHz Intel Core 2 Duo Aluminum iMac was purchased on 3/21/08 and it was perfect up until about the end of November. Now upon immediate boot up the CPU fan runs up to 3500 rpm for no apparent reason. At first this problem would only happen every now and then, but now it does it every single time. I've tried several things like reseting the PRAM and the SMC and that would work at first, but that doesn't do anything now. I ran the Apple Hardware Test and I got an error code (4SNS/1/40000000:Tp0P-131.000) when the fan was running at 3500 rpm, but when I ran the Apple Hardware Test when the fan was running at normal speed no error code came up. I recently took my iMac to an Apple Store and they looked at it and kept it for about a week and they said they could not find anything wrong with it and told me it was "normal" for the fans to speed up every now and then when it needs to cool down, but why would it need to cool down when I just booted it up and have no applications running? They told me that it could be a logic board problem or fan problem and they ordered the parts, but did not replace anything due to them not being able to find a problem. This problem has become extremely annoying cause the fan is quite loud and I absolutely loved the silence of the iMac when it was brand new. I don't have AppleCare, but my iMac is still under the 1 year warranty and I'm starting to feel that the only way Apple will do anything about this problem is if I purchase AppleCare. So has anyone else encountered this problem and if you have were you able to get it taken care of cause I'm getting extremely tired of this fan noise and I'm in desperate need of a solution.
iStat Screencap
http://i34.tinypic.com/213oqx3.jpg

I gave them the error code when I took it in and they just kind of shrugged it off and days later they called saying they ran several extended tests and were not able to detect anything wrong or reproduce my problem, but I remember the guy at the Genius Bar was able to reproduce the problem.

Crash on start up. Ran hardwear test got error code: 4SNS/1/40000000:IC0C-65.828

Have Mac Pro 13" crash on start up. I ran hardwear test got error code: 4SNS/1/40000000:IC0C-65.828
Mac is only 1.5 yrs old and out of warranty. I searched the net and found code= CPU0 problem but don't know if accurate. If CPU problem I guess a new logic board? I am pretty shocked I have a hardwear prob like this. Any ideas?

no one knows exactly what those codes mean except Apple techs. A guide/key explaining those codes has not been made public. While others in here can make vague gueses as to what it may be, you really need to bring your mac to an Apple store or AASP for evaluation.

Error Code 4SNS/1/40000000: TOOP

Hello
everybody this is my fisrt time on the apple forum and i hope i have come to the right place to post this topic.
i have this problem with a 20" 2.4ghz 3gb ram 320gb hard drive.the optical drive fan started to run high a couple of months ago (approx 3000rpm) under heavy computer use (ie lots of apps running) Ran the Apple Hardware test and the error
message 4SNS/1/40000000: TOOP comes up.
does anybody know what the fault is and how to rectify it.
I replaced the optical drive thermal sensor cable and the problem still exists.
thank you
Darren

Welcome to Apple Discussions.
After Googling your error code it seems like it's related to the fans not operating correctly. You probably did not fix the problem and may have missed putting it back together correctly or damaged a connection. Either way it will need to be taken apart to see where the problem is. You can attempt doing a SMC and PRAM resets however I doubt they would help out.
If you can't figure it out take the machine into a AASP to be looked at by a professional.
Roger

What does AHT error code 4SNS/1/40000000:TB1T-128.000 mean?

My MacBook froze on me last night while running Firefox w/ 4 windows open, each with 6 or more tabs. Seemed partly due to using the instant message ap on Facebook. The machine forze with the beach ball spinning it's heart out. Shut it down, restarted, and got a freeze during start up. Tried again this morning and the machine seemed to run ok for a session, after which I closed the lid without shutting down. After opeing the lid, the machine ran ok, then slow, then froze. I eliminated peripheral problems, eliminated software problems, then ran an Apple Hardware Test.
It produced the code: 4SNS/1/40000000:TB1T-128.00
This code does not show up in Google or this forum. Any idea what it means or where I may find out what it means? It's a late 2008 MacBook, so no warranty whatsoever.
Thanks in advance for any help!
Kermit

I ran the hardware test on my MacBook unibody and got the same result. Did you ever get an answer as to what this code means? I haven't been able to Google it either.

Hardware Error Code 4SNS/1/40000000:Th 1 H-83.625

I have been having issues with my mid 2009 13" MacBook Pro since the day I bought it. When running games I have lag even though my system specs are above the games recommended requirements At first I thought is was not a big deal so I ignored it. Its been getting worse now games that used to run fine are slowing down. A firend of mine has the same exact computer and specifications as I have and has no issues what so ever running any games. I just ran a hardware test and received this error. 4SNS/1/40000000:Th 1 H-83.625
Can anyone help?

You mean aside from my typo?
There are several temperature sensors in the computer that monitor the GPU, CPU, hard drive, memory temperatures. They tie into the SMC chip that controls the fans. As temperatures rise internally the SMC will increase fan speeds to keep the computer cool. A failed sensor could result in allowing something to overheat without increasing fan speed or cause the SMC to run the fans at top speed continuously.
The error information tells the service tech what and where the problem is so they can repair it properly.

Hi, what does the Error Code 4sns/1/40000000:IDOR-6.188 mean?

hi to everyone
A friend of mine has a Mac Book pro. Several days ago it wouldn't start up any more. It just goes on, then clicks and goes off. The only possibility was to press and hold the Power Button. After this procedure the MacBook booted up but was very slow. The cursor hangs etc.
I was able to do an extended diagnostic test and got the following error:
4sns/1/40000000:IDOR-6.188
I found some messages regarding hdd via google but the hadn't any value for me.
Best regards,
Nico

I ran the hardware test on my MacBook unibody and got the same result. Did you ever get an answer as to what this code means? I haven't been able to Google it either.

MacBook Pro Random Shutdown with Error Code: 4SNS/1/40000000: TAOP

Hi All,
Hope you can help, I have a 1st gen, MBP which i've recently upgraded the HD to a 500gb. Has been working perfectly until today when it had a few instances of random shut downs and not being able to power up...
Got this error code while checking the Hardware test, but not sure what it actually means : 4SNS/1/40000000: TAOP
Anyone got any ideas?? The HD is fully compatible and has worked flawlessly since installation, but now wondering if it has something to do with that??!
Hope someone can shed some light,
Thanks!
Darren

I too have a MBP 15". After 3+ years of good operation, it's developed a sudden shutoff. It happens when the machine is hot. I can get it happen often if playing a web video in Safari.
I've also run AHT and got error 4SNS/1/40000000: TCOP
Troubleshooting:
I used the widget iStat and the utility smcFanControl to monitor the CPU temperature and fan speeds. I found a direct correlation between CPU temperature spikes, fan speed, and shutdowns. My machine shutdown/failed immediately if the CPU spiked for 2 seconds above 120 Celcius - that's a hot spike. I think it's a safety shutdown.
By using the smcFanControl, I could nearly eliminate the shutdown by forcing the CPU fans to run full speed (6,000 RPM). This way, I could keep the temperature between 68-100 Celsius. However, I could still create conditions using multiple web video playback in Safari & Firefox that could spike the temp above 120 C. I found that running fans at full speed were not enough. Something additional must be wrong regarding heat transfer or sensing. So, I'm guessing the thermal grease on the CPU heatsink is old/dry/cracked. Or, there is dust/link blocking the airflow. Or, there is a design flaw with the heatsink so that it is insufficient to cool or monitor the CPU temperature properly. Not sure yet.
I see on other forums that there is a new heatsink design and part number. The design has better thermocouple placement. And, if replaced, it will have new thermal grease.
My question is: How can I purchase a new replacement heatsink for my MBP? Anybody know part numbers or vendors?

Solution for Error Code 148:3

So had this error and been looking around to see if I could find a solution on the forums or the support section and could not find a concrete answer. However I did read (here http://forums.adobe.com/message/1659492#1659492) something which reminded me of changes I had made to my boot sequence recently that I decided to check up on.
I try to keep a lean system so I try and turn off services and programs from starting up when I dont need them.
This problem for me has been cause by turning off the "FLEXnet Licensing Service" through msconfig. When it was turned back on and I rebooted problem solved.
For those that are unsure if thats it and dont know what I am on about follow these instructions:
(Warning: If you dont know what your doing with the book sequence or msconfig, follow the instructions and leave everything else alone. Using this tool can cause untold problems if you dont know what your doing and you dont closely follow instructions)
1.- Press "Windows Key" + R on your keyboard or click the Start button (bottom left of screen) and then select Run.
2.- Type "msconfig" (without the quotes) and hit return.
3.- System configuration window will come up, select the Services tab.
4.- Select "Hide all Microsoft Services" and look for "FLEXnet Licensing Service".
5.- Ensure "FLEXnet Licensing Service" is selected
6.- Click Apply and then Close and choose to reboot your machine.
7.- When Windows starts up again there should be a window telling you a change has been made, tick the box so it does not come up again and click ok.
Your problem should be solved, I hope. Worked for me. I also tested it, any time I turn it off Dreamweaver stops working and when its turned back on its fine.
Hope this helps
Ethnod

wow...wssparky thanks a TON. I got the adobe error today and it was driving me INSANE. I *think* the problem had to do with my having to disable all my startup stuff in Windows7 to fix a problem I was having updating some other Microsoft software. Anyway MS said disable everything using the msconfig and it was after that when Adobe stopped functioning (my McAfee is having an issue as well) properly.
At any rate I got the adobe "fix" and it worked GREAT!
I was NOT having any luck to begin with by going to the support area at adobe.com (HEY ADOBE PEOPLE>> TAKE NOTE)
searching "support" for the error code tells me "Your search of Support for error 148:3 did not match any documents." which I find interesting
so I finally googled the error code and found this thread.
now a word to those who are less than kind in their posts and make people feel stupid for asking the question here...I would submit these forums are for us (the users) to help each other (read: be nice to each other) so we can USE the software we OWN.
I'm frankly disappointed that going to the Adobe "SUPPORT" was fruitless. MY problem was with the CS4 suite: I own the master collection which wasn't exactly cheap....it wold be nice if I, as a customer was able to at least FIND Adobe's OWN error code on their support section.
again... thanks to wssparky

I have a MacBook Pro that gave me a hardware error code 4SNS/1/40000000:Th 1H-81.000. What does this mean?

My USBs ports are charging all devices like my iPod and my back-up external Hard Drive but the Mac does not recognise any of them.
The Hardware Test showed the following error: 4SNS/1/40000000:Th 1H-81.000.
What does this mean?
Thanks!

Thanks for the prompt reply Kappy...
Does this mean I have to hand in my Mac for repair or is there a way to solve it independently?
Cheers!

Any solutions for error code r6034

anyone find a solution for fixing error code r6034?

Hi fcianci,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

What does error code: 4SNS/1/40000000: tm0p -61.000 mean?

I just dropped my MacBook Pro "17 i5 500GB 4G RAM (2010 Model) about 3 feet from a chair on to the floor of my house (hard wood flooring), unfortunately.
Everything seems to work well but I went and did a hardware check, but Pressing "D" at startup, I got this error:
4SNS/1/40000000: tm0p -61.000
What does this mean?

Thanks, I will try to take it to the Apple Genius Bar this week.
And I have 3 more questions:
How much will this sensor cost? is it expensive?
Is it a serious issue? Because when I run the hardware test, it only gives me this error in the short test NOT extended test.

Macbook Pro shutting down. Hardware error code 4MEM/62/40000000:0x7f537f90

Macbook Pro shutting down. Not the same action making it shutdown. Anywhere from being online to attaching a photo to an email to working in Word or Photoshop. Even after it's closed and not being used. I come back to it being shut off and saying it had to restart because of a problem. I ran the Hardware check and got the Hardware error code 4MEM/62/40000000:0x7f537f90.
I must say I am quite disappointed. I have used Mac for work but had a PC since day one, and I JUST got this Macbook Pro in Dec. I was delighted that Mac usually didn't have as many problems with viruses etc as PC. And now last couple days, constantly shutting itself down. The closest store to me is a few hrs away. I am in South Dakota, store is in Minnesota Any help would be appreciated.

Can you post a screen shot of About This Mac -> (More Info) -> System Report -> Memory and click on each DIMM and post the bottom right pane. You can also do the same without a screen shot using just text version using the following highlighted command in OSX Terminal. The output is also listed.
system_profiler SPMemoryDataType
Memory:
    Memory Slots:
      ECC: Disabled
      Upgradeable Memory: No
        BANK 0/DIMM0:
          Size: 8 GB
          Type: DDR3
          Speed: 1600 MHz
          Status: OK
          Manufacturer: 0x02FE
          Part Number: -
          Serial Number: -
        BANK 1/DIMM0:
          Size: 8 GB
          Type: DDR3
          Speed: 1600 MHz
          Status: OK
          Manufacturer: 0x02FE
          Part Number: -
          Serial Number: -

What is error code 4HDD/11/40000000

What is error code 4HDD/11/40000000;SATA(0,0)?
Is there something I can do on my own to fix the problem or does it need to be sent to an Apple Tech.

Hardware fault at SSD or logic board for same.
You cannot fix it no, indicates a bad connector or failing drives.
backup all data ASAP and contact Apple for free in shop diagnostics and possible logic board replacement.

Unknown reason for error code 36331 in DAC run

Hi,
While running full load i am getting following error
Can any one give me the solution
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_123 -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 01:41:19.126 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status.

HI Srini,
I had copied Src files from BIApps to informatica Src file
While running DAC11g full load, we are en counting some issues below is the error we are facing
ERROR CODE - Unknown reason for error code 36331
one more thing to consider, In DAC10g we give /Oracle/OBIAPPS/Informatica/9.1.0/server/infa_shared/SrcFiles as Informatica parameter path in DAC system properties but in DAC11g if i take same path no task is running, it is failing at first task only and no parameter file is generating.
But if i give dafault in that Informatica parameter path of DAC11g some tasks are running success and i am able to see some parameters generated in DAC PATH, but Default is taking
/Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters path for that location.
Informatica Server details are Success, Physical Data sorce are success.
I had copied SrcFiles and LkpFiles to informatica from BIApps.
ParameterDW and parameterOLTP are moved to /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters as well as Informatica Src folder
for one task below is the error
2013-02-07 21:50:17.515 Acquiring Resources
2013-02-07 21:50:17.517 Acquired Resources
2013-02-07 21:50:17.519 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has started.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 21:50:46.989 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status.

Solution for error code: 4SNS/1/40000000/IBOR-9.426

Similar Messages

Maybe you are looking for