Solution for error: plugins required

Hi all,
I'm trying to help a new client who's current designer is going out of town. I have CS2 but I'm unable to open any of the files the client has forwarded. My guess is that the other designer has a newer version. (The error refers to plug-ins.) I never use plug-ins so - other than upgrading to CS3, 4 or 5, is there a way around this? I hoped she could save the files as InD interchange but that's not an option.
Any help is greatly appreciated.
thanks!
Sarah

I'm trying to help a new client who's current designer is going out of town. I have CS2 but I'm unable to open any of the files the client has forwarded. My guess is that the other designer has a newer version. (The error refers to plug-ins.) I never use plug-ins so - other than upgrading to CS3, 4 or 5, is there a way around this? I hoped she could save the files as InD interchange but that's not an option.
Basically, no. If your client is using CS3 and exports an INX file (which you say is not an option), it might work. If your client has CS4, then someone with CS3 needs to open up the INX from CS4 and export it again.
If you send me a private message, I'll tell you how to send me the file so I can save it down to CS2 for you, as a one-time way to get around your version problems. However, the only real solution is for you to upgrade.

Similar Messages

If am trying to open Indesign cs4 files am getting error plugins required

i have Adobe Indesign cs4, If am trying to open Indesign cs4 files am getting error plugins required, following plugins are required SCOTCH ROLES.RPLN, SANGAM SERVICER - MAPPER.RPLN, OTICAL KERING.RPLN etc
After pressing ok again am getting error

Go to Help > Configure Plugins... and make sure those listed in the first screen are listed and have a checkmark next to them to indicate they are active. That may fix the dictionary problem as well.
You may also need to reset the prefs. See Replace Your Preferences

Solution for Error Code 148:3

So had this error and been looking around to see if I could find a solution on the forums or the support section and could not find a concrete answer. However I did read (here http://forums.adobe.com/message/1659492#1659492) something which reminded me of changes I had made to my boot sequence recently that I decided to check up on.
I try to keep a lean system so I try and turn off services and programs from starting up when I dont need them.
This problem for me has been cause by turning off the "FLEXnet Licensing Service" through msconfig. When it was turned back on and I rebooted problem solved.
For those that are unsure if thats it and dont know what I am on about follow these instructions:
(Warning: If you dont know what your doing with the book sequence or msconfig, follow the instructions and leave everything else alone. Using this tool can cause untold problems if you dont know what your doing and you dont closely follow instructions)
1.- Press "Windows Key" + R on your keyboard or click the Start button (bottom left of screen) and then select Run.
2.- Type "msconfig" (without the quotes) and hit return.
3.- System configuration window will come up, select the Services tab.
4.- Select "Hide all Microsoft Services" and look for "FLEXnet Licensing Service".
5.- Ensure "FLEXnet Licensing Service" is selected
6.- Click Apply and then Close and choose to reboot your machine.
7.- When Windows starts up again there should be a window telling you a change has been made, tick the box so it does not come up again and click ok.
Your problem should be solved, I hope. Worked for me. I also tested it, any time I turn it off Dreamweaver stops working and when its turned back on its fine.
Hope this helps
Ethnod

wow...wssparky thanks a TON. I got the adobe error today and it was driving me INSANE. I *think* the problem had to do with my having to disable all my startup stuff in Windows7 to fix a problem I was having updating some other Microsoft software. Anyway MS said disable everything using the msconfig and it was after that when Adobe stopped functioning (my McAfee is having an issue as well) properly.
At any rate I got the adobe "fix" and it worked GREAT!
I was NOT having any luck to begin with by going to the support area at adobe.com (HEY ADOBE PEOPLE>> TAKE NOTE)
searching "support" for the error code tells me "Your search of Support for error 148:3 did not match any documents." which I find interesting
so I finally googled the error code and found this thread.
now a word to those who are less than kind in their posts and make people feel stupid for asking the question here...I would submit these forums are for us (the users) to help each other (read: be nice to each other) so we can USE the software we OWN.
I'm frankly disappointed that going to the Adobe "SUPPORT" was fruitless. MY problem was with the CS4 suite: I own the master collection which wasn't exactly cheap....it wold be nice if I, as a customer was able to at least FIND Adobe's OWN error code on their support section.
again... thanks to wssparky

Solution for error 2356

Hi, has anyone found a solution for iTunes installation error:2356?
I noticed a post since Dec last year, and no answers were found.
Still having trouble installing itunes... sigh

From http://support.apple.com/kb/TS3694#1669 :
Check for hardware issues
Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

Need solution for a Reporting Requirement

Hello Experts,
I need design a solution for Report, where in I need to show ageing of Invoice based of Due date of Invoice for last four weeks as explained below:
In cube i have records like this:
Industry       Invoice Number      Due Date      Amount
8111                   IV1                  13/04/2011 1000
8111                   IV2                  17/04/2011 1000
Say current week end date is 03/05/2011, now I need to show data for last 4 weeks in report, by calculting what is due at that weekend date e.g. there is no amount due on 12/04/2011, but next week on 19th amount due in 1000, then subsequent week there are 2 Inv. due, amount for 26th is 2000. Similarly there is additional invoice after 26th, so amount on 3rd remains the same i.e. 2000.
Industry    Week End date AR Amount due
8111     12/04/2010     0
8111     19/04/2010     1000
8111     26/04/2010     2000
8111     03/05/2010     2000
Please let me know what is the best solution to achive this, as data volume would be high i.e.
1. In Bex query, is this can be done, if yes how?
2. Or we need to do this in EDW, by having additonal cube, if yes how?
Please let me know if you have solution for this.
Regards,
Vipul

Hi All,
Thanks for the replies.
Please tell me if I can call a file sender communication channel from an UDF and pass the dinamic configuration values at runtime.
If this is possible, I think the above requirement is addressed.
Please tell me in case of any more solutions too.
Thanks once again.
Regards.

Does EchoSign have a solution for forms that require more than 1 signature?

We have a form that requires the employee to sign and the supervisor. The employee and the supervisor are often at 2 different locations. We want to use formscentral for the form. We would like the form to go to the supervisor for their signature before it comes to our department. Does echosign have a solution for form and signature process flow?

If you are sending a document to be signed by multiple signers you will want to define the Role for the various fields. The Role is who is allowed to interact with that field. By default the signers will sign in the order that their email addresses were entered into the To: field. It is important to keep this workflow in mind when setting up the signature fields.
When a signature field is placed you can set the Role for that field (who can click to sign). Right click on the signature field for the 1st signer and select edit. This will open a window where you can define the options for that field. Select the 1st signers email address in the drop down list for the Role: field.
Repeat this step to associate all the other signature fields for the other signers.
Please watch this short tutorial video to see how to author a multi-signer document:
https://www.echosign.adobe.com/en/misc/echosign-how-to-series-sending-to-multiple-signers. html

Any solutions for error code r6034

anyone find a solution for fixing error code r6034?

Hi fcianci,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

Solution for "Error while trying to synchronize Audio and MIDI" and "System Overload" messages

Article for those who hate Logic error windows
Seen in Logic Pro 9.1.7 on Mac OS X Lion 10.7.4
and Logic Pro 9.0.0 on Mac OS X Snow Leopard 10.6.5
Logic Pro:
System Overload.
The audio engine was not able to process all required data in time.
(-10011)
Error while trying to synchronize Audio and MIDI.
Sample Rate xxxxx recognized.
Check conflict between Logic Pro and external device.
The search in the help given as follows: overload occurs when you use a lot of tracks and a lot of effects on them, and the synchronization is lost when the selected MIDI track for recording or playback. Yes, this is all that is written in the resources. And here are useful tips that have been found:
The Bounce function allows the entire instrument track to be recorded as an audio file. This bounced audio file can then be used (as an audio region) on a standard audio track, allowing you to reassign the available processing power for further software instrument tracks. For more details, see "Bouncing Your Project."
You can also make use of the Freeze function to capture the output of a software instrument track, again saving processing power. For details, see "Freezing Tracks in the Arrange Area."
These tips - about the timing. About overload - there are no tips, except as "reducing the number of plug-ins" and "increasing latency". Zero useful tips - I got two errors in the test project with a blank audio track with no effects, MIDI drums and standard synthesizer, it was no aux buses, and the entire project was only a single plugin in the master track.
Here is the configuration of my computer:
iMac12, 2
CPU: Intel Core i5 3,1 GHz
Memory: 4 GB
And here's a project that almost immediately stops Logic, all instruments and plug-ins with the init-patch, ie not the most demanding settings:
It's sad.
When this happened the first time, I could start the project only if the empty audio track has been selected, a track specially designed so that you can at least start the project. Then, this problem has evaporated along with the changing conditions of work and I forgot about it until the last case.
I was looking for the cause of the problem in the console and the system monitor for two days, and finally I found that Logic ping to the network frequently. I remembered the exact time of occurrence of the problem, and system logs revealed that the problems began immediately, as soon as I deactivate the service of the Internet.
Solution: enable the Internet, or add a new network service on a computer with no Internet. I just created the Ethernet connection to the ip address 1.0.0.0
Logic immediately began to sing.

Hi gabaghoul
Yes, it worked for me on four different OS and Logic versions (10.6 - 10.8 and 9.0 - 9.1.6)
It does not work in some cases, hard enough to tell in which one, but you can try, it very easy: go to the net settings and create new Ethernet connection to the ip address 1.0.0.0 and connect LAN cable to the port.
Also you can try to figure out what happens in your system while Logic error occured - fot that you just start Console and search "logicpro"
Pay attention to repetitive events in a console and events with suitable timing, not so far from error
The problem may be related to the GUI or system memory, sometimes turning off Safari (or Chrome, others browsers) might help.
Message was edited by: spred

Need Urgent Solution for error in presence webservice

Hi Folks, I am new to ocsg , i got stuck with a serious problem
I am working with presence web service
As from documentation , i understood that watcher should subscribe with attrbiutes which he wants to look up for presence user's information , so i tried to give subscribe information, in that tab, i gave sip uri as tel:1234
and click on start button .Initially i got error that No plug in created
Then i tried to create the plug in from pluginmanager for presence webservice , but it is not allowing to create saying that "you cannot create plug for this service ( presence web service)"
then I started using the already existing
presenceservice = Plugin_px21_presence_sip and existing
================
presence instance = Plugin_px21_presence_sip#wlng_nt_presence_px21#4.1
then again i got error while I click on start button , saying that No Route Exists
then I added a route by taking Plugin_px21_presence_sip as input value and values given as tel:^.*
and I also set setrouteconfig as below values
================
Plugin_px21_presence_sip
================
<?xml version="1.0" encoding="UTF-8"?>
<route xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="route.xsd">
<destAddress defaultResult="true">tel:^.*</destAddress>
</route>
=================
it has accepted . then I again started the subscribe presence by clicking on start button .
14 Jul 2009 11:29:45,421 [ WARN com.bea.wlcp.wlng.util.EJBHelper - Failed to process request
com.bea.wlcp.wlng.api.plugin.NoRoutePluginException: Could not find a route for this message. address: tel:1234
at com.bea.wlcp.wlng.interceptor.RemoveInvalidRoute.invoke(RemoveInvalidRoute.java:49)
at com.bea.wlcp.wlng.interceptor.ContextImpl.invokeNext(ContextImpl.java:87)
at com.bea.wlcp.wlng.interceptor.CreatePolicyData.invoke(CreatePolicyData.java:25)
at com.bea.wlcp.wlng.interceptor.ContextImpl.invokeNext(ContextImpl.java:87)
at com.bea.wlcp.wlng.interceptor.RemoveInactivePlugin.invoke(RemoveInactivePlugin.java:39)
at com.bea.wlcp.wlng.interceptor.ContextImpl.invokeNext(ContextImpl.java:87)
at com.bea.wlcp.wlng.interceptor.CreatePluginList.invoke(CreatePluginList.java:59)
at com.bea.wlcp.wlng.interceptor.ContextImpl.invokeNext(ContextImpl.java:87)
at com.bea.wlcp.wlng.interceptor.ValidateRequestUsingRequestFactory.invoke(ValidateRequestUsingRequestFactory.java:41)
at com.bea.wlcp.wlng.interceptor.ContextImpl.invokeNext(ContextImpl.java:87)
at com.bea.wlcp.wlng.interceptor.EnforceSpAppBudget.invoke(EnforceSpAppBudget.java:70)
at com.bea.wlcp.wlng.interceptor.ContextImpl.invokeNext(ContextImpl.java:87)
at com.bea.wlcp.wlng.interceptor.EnforceApplicationState.invoke(EnforceApplicationState.java:71)
at com.bea.wlcp.wlng.plugin.PluginManagerImpl.invokeInterceptors(PluginManagerImpl.java:84)
at com.bea.wlcp.wlng.plugin.PluginManagerImpl.processRequest(PluginManagerImpl.java:58)
at com.bea.wlcp.wlng.util.EJBHelper.processRequest(EJBHelper.java:42)
at com.bea.wlcp.wlng.px21.ejb.PresenceConsumerEjbImpl.subscribePresence(PresenceConsumerEjbImpl.java:79)
at com.bea.wlcp.wlng.px21.ejb.PresenceConsumer_y33p2d_EOImpl.subscribePresence(PresenceConsumer_y33p2d_EOImpl.java:138)
at com.bea.wlcp.wlng.px21.ejb.PresenceConsumer_y33p2d_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at com.bea.wlcp.wlng.px21.ejb.PresenceConsumer_y33p2d_EOImpl_1030_WLStub.subscribePresence(Unknown Source)
at com.bea.wlcp.wlng.px21.jws.PresenceConsumerWsImpl.subscribePresence(Unknown Source)
at sun.reflect.GeneratedMethodAccessor376.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.component.pojo.JavaClassComponent.invoke(JavaClassComponent.java:112)
at weblogic.wsee.ws.dispatch.server.ComponentHandler.handleRequest(ComponentHandler.java:84)
at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.java:141)
at weblogic.wsee.ws.dispatch.server.ServerDispatcher.dispatch(ServerDispatcher.java:114)
at weblogic.wsee.ws.WsSkel.invoke(WsSkel.java:80)
at weblogic.wsee.server.servlet.SoapProcessor.handlePost(SoapProcessor.java:66)
at weblogic.wsee.server.servlet.SoapProcessor.process(SoapProcessor.java:44)
at weblogic.wsee.server.servlet.BaseWSServlet$AuthorizedInvoke.run(BaseWSServlet.java:285)
at weblogic.wsee.server.servlet.BaseWSServlet.service(BaseWSServlet.java:169)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3501)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2089)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
please guide me if my understanding is correct and my steps are correct or not, if all the above steps are fine, please tell why i am getting that error message
Really stuck with this problem from 1 week , please help me to move further.
Regards
Rajasekhar

Hi, if this is urgent I would suggest logging the issue on My Oracle Support in the Communications Service Delivery Community where Oracle and customer/partner/developer experts will advise whether this is a configuration issue or a bug that requires an SR to deliver a fix.
Regards
Graham

Solution for error code: 4SNS/1/40000000/IBOR-9.426

My computer recently has been running at its best. I did a diagnostic and gave me an error code 4SNS/1/40000000/IBOR-9.426. I wanted to get an idea what this means and what is the solution?

That indicates an internal sensor failure. You will have to take your MBP to an Apple store genius bar for repairs.
Ciao.

Solution for Error Message RSAODS015 during transport

RSAODS015 "No fields were supplied
No details are provided for this error message
This usually means that certain InfoObjects are missing and required for the Transported Object to be activated.
example: Transporting an InfoSource may be incorrectly reported as successful even though certain InfoObjects do not exist on the target system and are required by the InfoSource. Later on if you transport an InfoPackage requiring these missing InfoOjects you will receive this error. So basically Transporting an InfoSource does not correctly report that there are missing InfoObjects.
Hope this helps.

Hi Kenneth ,
Possible reasons for this error may be :
1. all the objects are not properly collected in transports .
2.The sequence of transports should be proper ex -> infoobjects,cubes,Multiprovider,Query .
3.It may happen that any one of the object is not yet transported so higher level requests are getting failed .
Please check the object and there dependency with other objects.
Regards,
Jaya

Need solution for material hierarchy requirement

Hi Gurus,
Our client wants that, when vendor selected for PO, material group choices display in PO based on the vendor category/commodity from classification. For example: if a facilities vendor is entered in the PO, then only the materials groups designated as facilities are displayed for choice when creating a PO. The material group choice must be able to overwrite what is in the purchase requisition which came from eBuyer.
Please help on this to get solution
Thank You
Natarajan

Hi All,
Thanks for the replies.
Please tell me if I can call a file sender communication channel from an UDF and pass the dinamic configuration values at runtime.
If this is possible, I think the above requirement is addressed.
Please tell me in case of any more solutions too.
Thanks once again.
Regards.

Solution for Error Message 2122!?

Hi everyone,
I've been reading all your posts about error message 2122 and so far nothing has worked. Someone mentioned looking at the compatability tab and after playing around with it, it worked! Here's what I did...
Right click on the iTunes logo on your desktop and choose the compatibility tab. I am running Windows XP, so in the first box, for compatibilty mode, I chose to run as Windows 2000.
Click OK
Cd burn worked fine!
Let me know if anyone else has success with this.
Emzy xx
Windows XP

Go to: http://club.aopen.com.tw/faq/
In the search field in the upper left hand corner of the page, type 2122 then click the magnifying glass (hitting Return may not work).
Click on the single result called 'My DVD ReWriter (model DUW1608/1616 ARR) wouldn't burn CDs with iTunes v6 and I received an message "unknown error occurred (2122)".'
This is what you get:
"Q7374: My DVD ReWriter (model DUW1608/1616 ARR) wouldn't burn CDs with iTunes v6 and I received an message "unknown error occurred (2122)".
We are sorry to inform you that currently iTune v6 doesn't support these two DVD ReWriters, DUW1608 ARR and DUW1616 ARR.
Last Updated : Jan. 16, 2006"
Sorry for the bad news.

More elegant solution for error "Current version of data in database..."

When two users try to manipulate the same record in a form, one of them gets the "Current version of data in database has changed since user initiated update process." when updating.
I'd like a more elegant solution (or prevention) of this situation by disabling the update button on the form of the second user who opens the record and display a message on the page that the record is currently opened by another user, so it is only available in "read-only mode" by the other user.
How can I do something like this? Or what are the multi user policies that other apex developers on the forum use and how are they implemented?

I don't think I would disable anything, as you need to consider the situation where someone opens a record, then goes to lunch.
You might update 2 columns such as "last_opened_on" and "last_opened_by" for the row. Then when the 2nd person opens it you could display a prominent indicator (red+bold) if it was opened by someone else in the last 10 min, as well as showing who opened it last. If it hasn't been opened in over 8 hours, you could basically de-emphasize that indicator by making it light gray or something. The goal is not to lock or disable anything, but warn a user when they open a record that was recently opened. If logistically possible, this gives them the opportunity to call / IM each other to coordinate.
Tyler Muth
http://tylermuth.wordpress.com
[Applied Oracle Security: Developing Secure Database and Middleware Environments|http://sn.im/aos.book]

Solution for Error

Hi to every body
Ifound an example on the internet when i compile it,it gives
me 2 errors:
Type was not found or was not a compile-time constant:
RemotingConnection. (17:-1)
Call to a possibly undefined method RemotingConnection.
(21:-1)
What should I do?

You have made a code error. Without the code, no-one can help
you.

Solution for error: plugins required

Similar Messages

Maybe you are looking for