Solution for Poor Apple TV Exports?

So I've been doing many export tests from FCP X. My main goal being for Apple TV 2 playback. I even used thed the Current choice from the basic Export Media option. I expected that to look like the original. I hardly looked better than the Apple TV 2 exports though. The I grabbed a Current Frame. It looked bad too. It made me think that FCP was grabbing from the proxy media. In prefs I went back to original media for playback and the frame grab was perfect. I then export again using Current and it was perfect. I thought I hit on something so I tried the Apple TV 2 export again. It looked bad again though. This really bothered me. For the heck of it, I took that Current export and used that to export from QuickTime instead using the Apple TV option. It was BEAUTIFUL - relatively speaking. Why though? NowI know I won't export from FCP like using those presets. I swear its using the proxy media. In fact, maybe I'll try again after deleteing the proxy media. Is Compressor worth the money for basic exports?

After many, many export tests, I believe I figured it out and it has to be a bug(s). And remember, as far as I can tell, I'm only having this issue when exporting to Apple Devices (specifically the Apple TV setting), not when using the Export Media option. This is not an issue with mixing file types in a project like I last thought was possible. This is an issue with proxy media. First, I was under the assumption that regardless of if you were using proxy media for your playback, your export would be created from your original media. To me that makes sense in a pro application. If I'm wrong about that, someone please chime in. It appears that if your playback is set to proxy media, your export is created from proxy media too. This is bug number one. If this is how it is meant to be though, there is still another bug. Lets say you've exported using proxy media and got a low res output. So you go to prefs and turn that option off so you're now using original media. Now you export again. Here's the next bug. Your output is still low res. The only way I found to correct this is to make a small change in the project while using original media. Once I do that, the project exports to the h264 720p Apple TV setting beautifully. When I get home, I'm going to use Provide Feedback in FCP to submit this issue.
Billy Gardner

Similar Messages

Solution for Poor signal in a wireless WDS network with two Airport Extreme

I have just bought my second Airport Extreme to create a wireless network with the best possible signal. I have one Airport Extreme in my office and the second one (supposedly the remote base) in the living room, two brick walls and 7 meters away. I have follow Apple instructions for the setup, main base "Create a Wifi Network" and Extend network option selected. The remote "join an existent network" and Allow wifi clients selected. According to Apple this is a WDS network between two Airport Extreme.
The network is working and the signal from my iMac is very good in my Office. In the living room the signal with my PC laptop is also very good.
Problem is that my iPod Touch OS 3.0 (I use it as a remote control in my living room with a twonky media server) gets now a very weak wifi signal in my living room, in many cases I lose the wifi sgnal although I sit two meters away from the remote Airport Extreme in the Living Room. If I go to my office with the iPod, then I get a good signal.
I think that only the first Airport Extreme in my Office (Main Base) is emitting a wifi signal and the second Airport Extreme (remote) is only receiving the wifi signal not making a repetition of the wifi signal. (Sorry for my explanation, I am not technical on this.)
I thought that, in a WDS configuration, the remote Airport Extreme WAS suppose to also replicate the wifi signal in my living room.
I have also tried a WDS manual setup with the two airport with the same results.
Is there a solution for this?. Do I have to connect the two Airport Extreme with a wire ethernet in order to be able to have a wifi signal strong enough in my living room for my iPod Touch?.
Thank you for your time.

Thank you Bob for your time.
I understand from your words that with a DHCP reservation I can force de Airport Extreme Main Base to assign an specific IP to a particular client in the network. Is that correct?. If that is the case, I will reserve the 10.0.1.3 to the Twonky Media Server (I need this to be fixed to this IP) and I will change the configuration of the remote Airport Extreme to DHCP automatic.
I will give it a try in a few days. I have spent so many hours with this set up that I am a bit terrified to start again today, to tired from work.
Just one last question. Setting up the remote Airport was very difficult with the Airport Utility. I had to reset and start many times as I always got two errors in the set up:
1.- Internet not connected.
After a minute or so, most of the time the problem was corrected automatically as the remote found the main base that is connected to the internet. I got a confirmation message for this.
2.- Second problem was that Airport Utility said that it could no connect the remote to the specified network. Sometimes (not always) the remote light turn green both in the Airport Extreme and in the Airport Utility, BUT I never got confirmation of a successful installation. Nevertheless, the connection was established because the wifi network exist.
Do I have to "disable the WAN port" during the installation of the remote Airport to avoid the problems?.
Best Regards,
Fernando

Is there any solution for poor image quality and l...

Hi! friends.I have bouht new E51.Its image quality taken from camera is poor.Although image resolution is high but low quality of camera is main problem.Is there any solution to improve image quality or any software to improve?
Also ringing tone is so much low.Is there bany solution to increase its ringing sound or ny software?

Never mind. After testing with my android tablet I found it was the headphones. They are Bose QC 15. The original battery was running down but work great yesterday. I suspected the battery and changed it but the problem persisted which led me to blame the upgrade. I should have known better. My apple devices have been flawless. Sorry for crying wolf...

Is there a solution for poor sound quality with ios7.03?

Hi all,
After waiting for a while and using 7.0.2 on my iPad I decided to upgrade my iPhone today. 7.0.3 was installed and while I am used to the general operation of the new iOS, I found that sound quality is terrible. The audio is extremely compressed. This was not an issue with 7.0.2. Unfortunately I also updated my 7.0.2 iPad to 7.0.3 and have confirmed that the latest iOS is at fault. Somebody really messed up.
Is it possible that I am missing a setting somewhere that was added with the latest update?

Never mind. After testing with my android tablet I found it was the headphones. They are Bose QC 15. The original battery was running down but work great yesterday. I suspected the battery and changed it but the problem persisted which led me to blame the upgrade. I should have known better. My apple devices have been flawless. Sorry for crying wolf...

Solution For Poor/Capped Uploads Lower Than Expect...

I have been trying to find out why my Windows 7 machine performed poorly compared to my Untangle Linux Box and Win2008 Server.
The uploads always seemed capped at 10Mbps or thereabouts. If I fired it through my Untangle Box I could get 18- 20Mbps.
A little more digging around it seemed a OS problem as I tried 2 different routers my ASUS N56U and a Dlink DIR655, and tried 3 different Network Cards.
So if you have a Windows 7 machine I suggest you try this, but of course at your own risk although I doubt whether you will really do much harm.
Anyways try this.
start, run, type REGEDIT and open it, then find this
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\AFD\Parameters
create a new dword 32bit string in Parameters and name it "DefaultSendWindow"
Exactly as sated here case sensitive without the quotes
then double click it, choose Decimal and type this number 1640960
exit regedit, reboot pc.
After reboot run speedtest and see the difference.
My speeds are as expected now on all my machines.
BEFORE
AFTER

Why 1640960?
According to this , the formula is (Upload Speed Kbps / 8 ) * 1024 = DefaultSendWindow
which I work out as 2560000 for 20Mbps
If you found this post helpful, please click on the star on the left
If not, I'll try again

Solution for Disappearing Apple TV in iTunes under Devices

I have stumbled accross a weird but real solution to all of you that keep haveing the Apple TV disappear after 15 seconds or so.
I have no idea why this works but it is obviously a bug.
Here you go.
Start iTunes and when you see Apple TV appear under Devices, click it to see it start uploading your content.
Then very quicly open Preferences off the top menu and to to the Apple TV tab. Leave that window open. If you do , the load and sync continues and really works.
Once you shut the window the Apple TV sync will stop and will disappear under devices. This is an obvisou bug, but it works.
Good luck!
Jim

Open the software and change your settings.
You were probably "warned" (loud noise and a window from NetBarrier) advising you that your computer was "under attack" and you blocked the connection when you put it on the "stop" list.

One solution for Apple TV losing connection to its iTunes Library

In 2012 I bought an Apple TV3 to let me use the AirPlay features of my New iPad with my HD TV. All worked fine and still does. Later in 2012 I subscribed to Netflix and enjoyed streaming movies to my HD TV via the Apple TV. Having had such a good experience with it so far I bought another for our bedroom TV and another for a relative, hoping they would have the same great experience with it.
Both of my Apple TV units at my house have worked flawlessly since installing them. We can start watching a Netflix movie downstairs then go upstairs and carry on where the movie left off.
At my relative's house the experience was not so flawless and has resulted in about 2 months of frustration but happily their AppleTV3 is now also working as expected. It has been quite a journey to get to this point and had a surprising solution.
I am the 'go-to' person in my family for these things so I installed the Apple TV for my relative.
My relative has a Windows XP (SP3) PC running the latest iTunes (11.0.2), a BTHomeHub 2 router, connected by WiFi to the Apple TV. The PC was connected by ethernet cable to the router. I installed the Apple TV, set up the hdmi connection to the HD TV, connected it to the WiFi network, upgraded to the latest iTunes on the PC, added the Apple ID for Home Sharing to iTunes and the Apple TV and could connect to the iTunes library on the PC, all good so far. I could play video or music or podcast or view photos from the iTunes library on the PC but after a short time (a few minutes or so), if I tried to play a different video or music track the I would get the familiar spinning icon and the Apple TV would not play the media file. Often the Apple TV would still show the contents of the iTunes library but would not play anything from it. When it was in this state it was still possible to play iTunes Trailers or Purchased content or a Youtube video or display photos from my library. This proved it was still connected to the internet and to some extent my library on the PC because it could display photos.
Initially I thought it was a WiFi problem as that was how the Apple TV was connected to the router. So as I already had a Powerline ethernet link running from the router to the TV for the Humax Freeview box for the BBC iPlayer, I ordered a small network switch to share the Powerline ethernet cable with the Apple TV. However the same drooping connection problems were apparent. I tried changing the QoS settings on the Powerline link, tried to prioritise TCP or UDP or both , but no improvement. I decided to abandon the Powerline link in case it was 'too slow', perhaps that was the issue.
I tried one of the Apple TV units from my house, where they were working fine and I got the same problem, at my relative's house it behaved like their unit, it would connect play a movie (all the way through if we let it) but after a few minutes if trying to play something else it would not play anything further. I tried their Apple TV at my house and it worked there, so the unit was not at fault.
At various times while troubleshooting these problems I have unistalled iTunes, reinstalled it, uninstalled Bonjour, reinstalled it (it comes with iTunes), searched the registry and cleaned it (Warning: do this at your own risk as you risk destabilising Windows), I have tried disabling my firewall on the PC and/or on the router, uninstalled the Antivirus / Firewall software (Norton) on the PC, I have added the Ports required for the Apple TV to my router and firewall software, I have read many, many forum posts about what has worked for other people and I tried them all in various combinations.
I decided having tried the above that the problem must be the Windows PC, so I swapped it for a few days with a laptop, connected wirelessly to the router. I had an iTunes library on the laptop so I shared it with the Apple TV and stopped iTunes running on my relative's PC. For a few days it actually worked, the Apple TV would play one movie/music track and I could select another and play it after a few minutes, a partial solution had been found except the laptop was needed elsewhere and I wanted the Windows PC to be the source for the iTunes library. I briefly considered suggesting they should buy a modern PC or Mac as their Windows PC was around 9 years old, may be that was the problem? This would have cost around £400+ and was out of the question. Fortunately I had a spare PC and I decided to swap it with the Windows PC, it was only a couple of years old and as such it must be 'better' I thought. Swapping one PC with another and transferring e-mails and documents etc. took quite a few hours but it was done. I uninstalled iTunes, reinstalled it and set up the home sharing again. This second Windows PC was running XP (SP3) and Norton 360 Firewall/Anitvirus software. I checked that after installing iTunes the Program rules in Norton were allowing the TCP and UDP communications expected by the Apple TV, I noted these were not specific ports but all TCP and all UDP communications were allowed. All of this met the recommendations that other posts had suggested. I tried it with the Apple TV but no, exactly the same problem, the iTunes library could not be found after a few minutes.
I found that if I restarted the Apple TV it would connect and play a file (movie/music etc) but if I played an iTunes trailer or just waited a minute or so then it would lose the connection. Another symptom would be when I landed on the 'Compters' icon it would tell me to 'enable home sharing on the PC with this Apple ID' , which I had already done.
If I tried playing via the Apple TV while selecting tracks from within iTunes on the PC, then sometimes the AirPlay icon was present or not present, sometimes worked and would then always not work until I restarted at least iTunes and the Apple TV, if not also the router or PC, whatever I tried it would not result in a connection between the Apple TV and the PC that would survive more than a few moniutes at a time.
Having swapped the Windows PC hosting the iTunes library with another I swapped the Apple TV again with one from my house, again same behaviour. So this suggested the problem was the BTHomeHub router as that was the only bit of hardware not exchanged. I compared its settings with the same unit at my house, I tried forwarding ports, I tried chaging the security from the default 'WPA & WPA2' to WPA or WPA2, still no solution. I tried reducing the default WiFi connection protocol from 802b/g/n to 802/b/g. I tried variations of all the other possible settings that could be changed but in the end set them to match the ones at my house. Still no solution. I considered buying an Airport Extreme or similar to link that via an ethernet cable to the router and enable it to be the WiFi access point for the Apple TV. This would have cost around £80 similar to the cost of the Apple TV itself, so was also dismissed as an idea.
I decided to restore the router to factory settings, this was done and I set up the WiFi connection again to the Apple TV, still no solution, same behaviour on the Apple TV. I decided it must be a problem with the WiFi so I tried a direct ethernet cable trailed through the house from the router to the Apple TV to eliminate the WiFi involvement, that would have to be the answer, wouldn't it? No, same problem.
I discovered some useful diagnostics along the way that are somewhat techie but worth persevering with as they could be useful for diagnosing what the problem could be. Find out on your router what the IP Address is for your computer that is hosting your iTunes library and the IP Address for your Apple TV. The IP address is essential for either device to connect with each other or the internet. The Apple TV IP address can be seen via Settings/General/Network, it has the form like '192.168.1.69' and for the PC it was '192.168.1.80', the values don't have a particular significance but the last digits after the 3rd dot will be different for each device.
On the PC (or Mac), open a Command (PC) or Terminal(Mac) prompt and try to 'ping' the Apple TV to see if you get a response
e.g.
c:\ping 192.168.1.69
or
c:\ping apple-tv
You should get a response indicating the number of milliseconds it takes for the 'ping' to be returned to the PC from the Apple TV , this will show that the PC can connect to the Apple TV, if it does not get a response then you should check that the PC and Apple TV are connected to the same network (either wired or wifi). You must be able to get a successful ping for the connection between the PC and the Apple TV to work at all.
Another diagnostic is to check the network status on the PC (or Mac)
e.g.
c:\netstat -an
This will show all the current TCP/UDP connections and also the local and remote IP addresses and ports. Look for the IP address of the Apple TV in the third column, there will be many rows returned so just concentrate on the rows with the IP addressses of the PC and the Apple TV
e.g. look for rows like the following:
TCP 192.169.1.80:3689 192.168.1.69:49123 ESTABLISHED
UDP 192.168.1.80:5353 *.*
UDP *.123 *.*
TCP Port 3689 is used by the Apple TV to communicate with iTunes for playing content. This connection is essential, there may be more than one 'established' connection to the remote Apple TV from the local PC.
UDP Port 5353 is used by the Apple Bonjour service to send multicast communications between iTunes and any iOS devices on the same network, such as the Apple TV, again it is essential.
Port 123 is used by Apple products to obtain the date and time, the UDP row above shows that any local IP Address can communicate with any remote IP address on the router's network and provide it with date and time information.
If your firewall software on the PC is blocking any of these ports then the 'netstat' command is useful to see if you need to unblock any. In my experience, this port unblocking was not necessary as when I installed iTunes, the Norton software automatically set up appropriate rules for the iTunes program, and opened the required TCP and UDP communications as iTunes needed.
Likewise, on the router itself, I have the UPnP setting enabled and this allows software like iTunes and Bonjour to traverse the router's firewall without it being necesssary to explicitly set the ports to be forwarded.
If I started the Apple TV, and ran the 'netstat -an' command over the next few minutes I could see the number of rows for the Apple TV diminish, and this was a symptom of the dropping connection problem.
Ultimately having replaced the Apple TV with another 'working' one , swapped the PC, restored the router to factory defaults, disabled the Windows or Norton firewall, tried ethernet and WiFi connection between the router and Apple TV it struck me that the only component I had not considered was the insignificant ethernet cable linking the PC to the router. This has been present since the router was installed for the original PC around 4 years ago. But surely this was how the original PC and the swapped in PC were getting to the internet quite normally and successfully? Also this was how the Apple TV was accessing the PC via WiFi then via the router through this ethernet cable, there was no way it could be the cable, cables don't allow a connection for a short time and then cause a timeout can they?. Thus, confused, and with all other avenues explored, I removed the cable between the PC and the router and enabled a WiFi connection from the PC to the router. After restarting the PC, Router and Apple TV, just to be sure, I tried the Apple TV again.
I could play some music on the Apple TV from the iTunes library, I could play it for a minute or so and then go to movies and play a movie from the iTunes library. I tried to play an iTunes trailer, some YouTube videos, these worked as usual. I then went back to the library and yes, I could play another music track or another movie. I forced the Apple TV to 'sleep' via Settings/General/Sleep Now and tried again, I woke it up and could play any music or movie from the library. Elated, I went out for meal with the family, nervously hoping throughout the meal that the solution had been found. After a couple of hours we returned, woke up the Apple TV and yes, oh yes!, it would connect with the library and play a succession of music or videos without seeing any dropped connections. Several hours later I could wake up the Apple TV again and select any content from the iTunes library on the PC and play it, finally the unit is behaving as I would expect.
This solution may not apply for all, but it worth following all of the components in the path between the Apple TV, router, computer (either PC or Mac) and the iTunes library and checking that each is able to commmunicate successfully and over a period of time reliably so that the Apple TV can perform as flawlessly as it is capable of.
Don't, as I did expect the solution to involve a complicated series of special settings of ports or communications protocol changes. Do perform a clean install of iTunes and keep it updated, do keep Firewall settings simple and let the settings be default settings, do rely on UPnP (Universal Plug and Play) on the router. Let the router select which channel it wants to use, it will select the channel with least interference...and check out that insignificant ethernet cable if you have one. It might work fine for general communications from the computer to router to the internet but it can be a source of connections dropping on the Apple TV!
My relative is now a happy Apple TV user too.

Useful to watch what is happening to the TCP/UDP connections when the Apple TV is connected to iTunes and when it is actually playing some media from iTunes and when it stops playing.
To see this, use the Network Statistics command 'netstat' from a Command prompt (Windows PC) / Terminal Window (Mac):
e.g. for Windows:
c:\netstat -an 5
This repeats the netstat command every 5 seconds, use Ctrl-C to quit the command. (Use 'netstat -h' for help with this command)
While iTunes is running there will be a number of TCP records displayed for the computer's IP address using port 3689, showing at least 3 ports in use for the Apple TV's IP address.
i.e.
TCP host_ip:3689 apple_tv_ip:49187 ESTABLISHED
TCP host_ip:3689 apple_tv_ip:49196 ESTABLISHED
TCP host_ip:3689 apple_tv_ip:49255 ESTABLISHED
When it is playing content there are more connections established, some of these rows will gradually disappear when the media file stops playing. These addional TCP records show iTunes using different ports from 3689, but only while media files are being played.
When a video file is played, (on this Windows PC at least) the iTunes host is using ports 4463 and 4464, with the Apple TV using port 7000. When playing a music track or podcast, the iTunes host is using port 4472 or 4489 and the Apple TV is using port 5000.
When the media is playing, the fourth column returned by the 'netstat -an 5' command : 'State' shows as 'ESTABLISHED' and shortly after the media file is stopped playing it shows as 'TIME_WAIT' until the record disappears after a minute or so.

WRT610N V1 - Solution for not connecting iTunes to Apple TV

I have a solution for anyone with a WRT610N(V1)who is having problems (BTW this will work with V2 router also). I could not connect my iTunes to my apple TV, or it would appear fleetingly. Same problem using my iPad as a remote.
The issues you are having are to do with the firmware. Last year Cisco stopped performing firmware updates for version 1 (V1) of their router and fixed all your/my issues for their Version 2 router (V2) [Look on bottom of your router for version number - it is after the model number].
The fix, as obvious as it might be, is to load the V2 firmware on your V1 router.
Firstly go to the Cisco download page for the WRT610N router (http://homesupport.cisco.com/en-us/wireless/lbc/WRT610N/download)
Select Version 2.0 as your model (yes I know this is wrong and will make you sweat a little)
Download firmware upgrade to an easy to find location on your computer (I used desktop). You will now have downloaded file FWWRT610N_2.00.00.05_20090710code.bin.
Go to your router admin function (if you don't know, just type 192.168.1.1 into your browser) Default User ID is admin and leave password blank.
You will now see the Linksys router administrative application.
Click on "Administration"
After you have done that you should see "Firmware Upgrade"
Click on "Firmware Upgrade"
Select the file I mention earlier from the location to which you downloaded it.
Allow router to upgrade (you do not need to do anything to router once it is finished).
Go to apple TV and bask in the fact that you now have a fully functional apple TV with iTunes happily available.
I am sorry if these instructions are a little simplistic, but I wrote them trying to help anyone who is used to just opening a box and ignoring the manuals (like me!)
Good luck and Merry Christmas

Solution for people who have linksys WRT610N. I hope you find this and it helps!
The Grendel!

After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for hel

After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for help from you I will make the iphone does not open e-mail address associated with it @hotmail.com mail to this address icloud iphone phone's password is forgotten, I want to thank you in advance for your help tell a method of opening up again.
<Email Edited by Host>

Welcome to the Apple Community.
I have asked for your email address to be edited out. Posting your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
If you want people to contact you, enable others to see your email address in your profile.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
Apple Topluluk hoş geldiniz.
Ben düzenlenebilir için e-posta adresi için istedi. Açık bir konu adres gönderme istenmeyen e-posta ile bombardıman bir emin yoludur, bulmak için otomatik algılama yazılımı için, size sorunu giderilmiştir sonra burada uzun olacak unutmayın.
Eğer insanlar sizinle iletişim istiyorsanız, başkalarının profilinizde e-posta adresinizi görmelerini sağlar.
Bu özellik onları çalıntı olduğunu bu işe yaramaz çalıntı telefonları için getirilmiştir.
Ancak aynı zamanda kullanıcı Apple ile Apple ID ayrıntıları değişti ve iCloud hesabı için aynı değişiklik yapmamış ortaya çıkar / iOS 7 yükseltmeden önce cihaz üzerinde My Phone bul olabilir.
Tek çözüm My Apple ID de Apple ile önceki durumuna geri Apple ID değiştirmek için, değişiklikleri doğrulamak cihazınızda talep olarak, şifreyi girin ve sonra kapatın "benim telefon bulmak".
Daha sonra tekrar bugünkü durumuna Apple ID değiştirmek gerekir, bir kez daha doğrulamak cihazınızdan iCloud hesabı silmek ve daha sonra mevcut Apple kimliği kullanarak oturum açın. Son olarak, geri bir kez daha üzerinde "benim telefon bulmak" açın.

Multiple Digital Optical Solution for Apple tv Gen 3

Since Apple tv generation 3 only connects w/digital optical and my Bose sound system has one digital output. I'm forced to choose between cable sat & aux for dolby digital sound. Is there a solution for this?

Marmac73 wrote:
Where (in sweden) do I find a micro-USB cable
At any store or website that sales microUSB cables.
There is no specific Apple cable.

My ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that

my ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that

Have you tried a reset first? If it works, you won't have to go through the restore process.
Hold down the sleep (upper right hand top) and the home button at the same time. A slider will appear. Ignore it and keep holding down the buttons. The Apple logo shoud appear. Then your ipad might work again. It takes a good 15 seconds. You will not lose anything on your ipad.
If you try it a couple of times and it doesn't work, you might have to go through the restore process as has been suggested above. But follow the steps so you don't lose your data.
Hope this helps.

I have noticed iOS6 slow down browser and email client, I really hope Apple will find solution for this. Junaid

I have noticed iOS6 slow down browser and email client, I really hope Apple will find solution for this. Junaid

We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.

I have iPhone 4 and I have purchased this from Dubai and now I am in India but now my phone didnot working here .so plz give me solution for this so I will use this in India.can I factory unlocked my iPhone by apple store at jaipur india

I have iPhone 4 and I have purchased this from Dubai and now I am in India but now my phone didnot working here .so plz give me solution for this so I will use this in India.can I factory unlocked my iPhone by apple store at jaipur india

ONLY the carrier it is locked to can authorize unlocking it. Most have restrictions in that you must be a current customer and have maintained service for a minimum period of time. Do yourself a favor, sell it and purchase a phone in India instead.

Apple could you please find a solution for flash videos on safari

dear apple,
apple i am really looking forward for looking up a solution for watching flash content on safari .
best wishes
TARIQ MOHAMED

You are not talking to Apple here, you need to send them feedback via the official channels.
http://www.apple.com/feedback
Also, Adobe just announced that they are ceasing development on mobile flash for all devices, so there is no chance Flash will ever come to iOS.
Mobile Flash is dead, it's all about HTML5.

Buy second hand iPhone ........... i have apple id of previous owner but no password ... now the phone is in icloud activation mode . any solution for this.

i buy second hand iPhone from Olx ........... i have apple id of previous owner but no password ...
now the phone is in icloud activation mode . any solution for this.
totally wastage of money , if there is no solution .
for security purpose this icloud activation is Good ............

Read this
http://support.apple.com/kb/TS4515?viewlocale=en_US&locale=en_US

Solution for Poor Apple TV Exports?

Similar Messages

Maybe you are looking for