Solution for Privacy of message preview on lumia 5...
Are your looking for the solution or tip for the privacy of the message content shown on message preview on lumia screen? I have written blog on it, giving you a very easy tip and trick to avoid this problem, have a look, I am sure you would be thankful and happy to see this,
specially for lumia 520 users, forget the embarrassment by the message content shown to your friends and follow the steps to get rid of this: go to the blog below:
http://madihahshaid.blogspot.com/
You may add your vote HERE and hope MS comes out with a solution..
Similar Messages
-
Temporary solution for deleting text messages for the Droid X
For everyone trying to delete the message history:
I know this is a pain in the rear-end, but I found a way that works as a temporary fix.
~Write down the number of the contact you're trying to delete from the history (ex girl/boyfriend, secret lover, whom ever)
~Delete the contact
~Re-enter the contacts info
You'll notice the history for that contact is gone and even though this is a rather long route to take to delete the history it works.
Now lets just hope there's an update soon.Runnman,
I am not sure you if you know this or not but the Droid X stores text messages as well as phone call histories in two locations. One location for your text messages is at the location where you would normally send or receive messages, you can reply to them and if you'd like you can delete the conversation as well as the trend, however, there is a catch. Even though you have deleted the trend or conversation, if you go to your contacts and swip your finger to the left or right (I can't recall which way but you'll know when you see your message history) you'll see all you text messages. It's this location where the messages and call history can not be deleted and the only way I have found and so far the only technique that actually works, is to delete the entire contact, once the contact is deleted you will no longer have the history listed. Then you can readd the contact and repeat the process until an update is provided. I hope this doesn't confuse you too much.
Cheers -
Some solutions for screwy unread message counts
I've recently found solutions to two Mail.app (version 2.0.5) problems
I'd been having, and figured I'd share them. My apologies if these
duplicate things already said here by othersq; a quick Google didn't
turn these up for me.
Problem 1: Mail spontaneously becomes unread after reading it. In my
case, at least, this was directly correlated with installing the
GPGMail plugin, and went away when I removed the plugin. According to
http://www.sente.ch/Lists/gpgmail-users/Message/847.html you can solve
this problem by tweaking GPGMail's configuration; I haven't tried this
myself yet, but will soon.
Problem 2: Unread message counts are sometimes unreasonably high in
IMAP folders. In my case, I would receive one piece of email, and my
"Unread Messages" Smart Folder would report that I had 8 unread pieces
of email. When I would click on the folder, it would show me just the
one piece of mail, and the count next to the smart folder would go
away.
I should note here that I had configured Mail.app NOT to move deleted
messages to a Trash folder.
It turns out that when I selected View->View Deleted Messages, I could
see another 7 unread --- but deleted --- messages. (All were spam that
I had manually "moved" to another folder, which, when Mail.app is
configured not to move deleted messages to a Trash folder, leaves
behind a deleted copy in the original folder. Oddly, when Mail.app
is configured to move deleted messages to a Trash folder, moving a
message leaves no deleted body behind in either the source folder, or
in the Trash folder. This seems inconsistent to me, but that's
another matter entirely.)
Anyhow, the 8-or-0 count seems to be due to an inconsistency in how
Mail.app counts deleted-yet-unread messages: when a new message comes
in, it includes deleted, but unread, messages in its unread message
count; but after you've read that new message, it no longer includes
deleted, but unread, messages when it updates the count. So the count
goes from 8 to 0... until the next time you get mail.
Incidentally, another side-effect of this bug is that partial copies
of an email message saved in your Drafts folder, and then deleted when
you sent the mail, cause the Drafts folder to show a non-zero count
whenever you receive a new piece of mail --- even though clicking on
it will show it to be empty (until you start viewing deleted
messages.)
The workaround for all of this seems to be to configure Mail.app to
always move deleted messages to the Trash folder I think this is
probably the default configuration; I had changed it for reasons which
I no longer remember.
I am posting this information to the apple.com mail suport forum and
to the macintouch mail.app forum, and I am reporting the bug to Apple
via the ADC bugtracker.
Mac OS X (10.4.3)Sorry I am marking this solved, but it never was.
The best thing that could be done is to rely on Time Machine, or forward all of your incoming email to another address.
Apparently, there is no way to do what I asked. But there should be. So Apple, please fix this.
Again, sorry I am marking it as solved. -
How do I make my Windows computer Dell Latitude E7440 play the movies I just purchased? I am getting the message, "To play this movie in HD, your PC must have Windows 7 and a built-in display or a display that supports HDCP."
Is there a fix or solution ot this problem? Please help!Hello Mendeezee,
Depending on the age of the monitor, you may not be able to playback any HD content that is purchased in iTunes. One way to check is to download the SD version that comes with the HD version. Check out the articles below for more clarification.
iTunes for Windows: Unable to view or play HD video content that requires HDCP
http://support.apple.com/kb/ts3354
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/HT3209
In iTunes for Windows, in order to view HD content, both the display hardware (computer screen, LCD, external monitor, and so on) and video card driver must support HDCP.
Note: Depending on your computer's hardware limitations, you may be unable to purchase, rent, or view HD content from the iTunes Store. If you are trying to view HD video on an external display, the display must have a digital connection (DVI, DisplayPort, or HDMI) and support HDCP.
Regards,
-Norm G. -
Solution for VBScript error message on Vista systems
From what I can gather in the short time that I have searched on this topic, this is a common problem for most Vista users trying to install the latest iTunes. I tried the following and it worked great.
Start
All Programs
Accessories
Right click on Command Prompt and run as administrator, Enter
In the command prompt, type the following;
regsvr32 vbscript.dll
[Press Enter]
You get a pop-up stating that vbscript.dll was registered successfully.
I found this solution here in this discussion forum. I hope this helps others.
AMD Athlon Dual Core Windows Vista
AMD Athlon Dual Core Windows Vista
AMD Athlon Dual Core Windows VistaThis is not working for me. I do not know what else to do to try and correct this problem. I attempt to install, get the 2738 error code, and then enter regsvr32 vbscript.dll in the command prompt, and then get another error:
The module "vbscript.dll" was loaded but the call to DLLregisterserver failed error code 0x80004005.
For more information about this problem, search online using the error code as a search term.
Windows Vista -
What is the solution for this ERROR Message
Hi all,
In the morning hrs on every monday, we have following error's in out log files. Then we manually start the DB with SQL Scripts....any solution to this error.....
ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 2943
ORA-00604: error occurred at recursive SQL level 1
ORA-00980: synonym translation is no longer valid
Error 1519 happened during db open, shutting down databaseORA-01519: error while processing file 'string' near line string
Cause: CREATE DATABASE encountered a problem while processing specified file. The specified file is bad.
Action: Retry your system installation procedure or contact your customer support representative.
Don't understand, did you want to create a database or just start it ?
Please read the following :
http://www.dbasupport.com/forums/showthread.php?s=f1242106028c91c968eddb254dc8a423&p=232037
Nicolas. -
i got Mac originally version is 10.6 and have upgrate to 10.6.8 and than i continue updating to 10.8 and this kind of message always appear until i turn off and turn it on. what is the solution for this message
This message?
http://support.apple.com/kb/TA20920
is a difficult one to resolve.
There is an analysis and suggestions to this problem posted here.
http://www.thexlab.com/faqs/kernelpanics.html -
Subsequent documents already exist for item - information message
Hi All,
Once a sales order item is rejected post creation of subsequent document, the information message in quetion appears for every item repeatedly.
I have cases were there are thousands of items (in RRB billing drafts for instance), and the reason for rejection is set via the menu: Edit --> Fast Change Of --> Reason For Rejection. The problem is that the message pops-up for every item separately and the users are obliged to press Enter thousands of times.
Is there any solution for disabling this message under defined circumstances?
Appreciate your assistance.
AmitHello,
Once a sales order item is rejected post creation of subsequent document,
the information message in quetion appears for every item repeatedly. I have
cases were there are thousands of items (in RRB billing drafts for instance),
and the reason for rejection is set via the menu: Edit --> Fast Change Of -->
Reason For Rejection. The problem is that the message pops-up for every item
separately and the users are obliged to press Enter thousands of times.
My suggestion would be why not reject the Sales Order at Header Level. The second option will be try out the transaction code "MASS" and for any list of Sales Order, you can easily reject at a single shot !!
Regards,
Sarthak -
when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..
First thing i would try is to use another cable if available.
-
Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
"Blocked plug-in message" problem on my OS X 10.6.8 (Safari's 5.1.10). Any solutions for a non-techie (step 3 on Adobe Flash's instructions leads to dead end, i.e. product for sale). Thank you.
Prior to updating flash player, you must first uninstall all previous versions. Make sure you are downloading from the proper Adobe website = Adobe Flash Player Software
Flash Player Uninstaller
Repair permissions and restart your computer after the installations. -
Solutions for previewing HDV via video monitors ?
I have recently been given the task of setting up a video editing suite combining:
FCP6
HVR-1500 decks
Panasonic BT-LH1700WE LCD video monitors
FX7E HDV cameras
I've read that it is not possible to preview HDV via firewire and this seems to be the case thus rendering the Video preview monitors useless via the decks at least.
My question is what would we need to get in order to get a live broadcast preview to the monitors ?
Many thanks in advance.
-mattOk so i've done a little research and it seems like The Matrox MXO would be the best solution for our needs.
Does anybody have any experiance with this or a similar output device ? -
my txt message app constantly locks up requiring me to reboot the phone. Is there a solution for this ?
That's quite odd Rob8, but we can definitely get to the bottom of this. When did it start? Do you delete heavy and older threads? Please go to Settings>General>About. What is capacity? What's available?
AdaS_VZW
Follow us on Twitter at @VZWSupport -
Since I have connected my iPad with the MacBook through ICloud I have problems in Preview of opening PDF- and JPG-files. Does anyone have a solution for this?
I'm not sure I understand the connection between iCloud and this problem. Is it simply a problem of coincidental timing (ie, the problem happened after you set up iCloud)? If so, there's almost certainly no connection between these two events.
Where are you getting the files you're trying to open, and what specifically happens when you try to open them? -
i have upgrade os 6 on my iphone 4 but now in map application i cant found direction from location to location , message appear direction not found so please tell me solution for that
http://support.apple.com/kb/HT3743
Sorry discussing J/B is in breach of the terms and conditions of thi Apple hosted forum
Google is probably your best hope
Maybe you are looking for
-
HOW DO I INSTALL TWO DIFFERENT ITUNES ON ONE COMPUTER
how do i install two itunes accounts on one computer using windows 7
-
I attempted to update my iPhone 4 from ioS 5 to ioS 6 from iTunes on my laptop using Windows 7 OS, I had downloaded the new ioS 6 and started the update on the iPhone 4 and everything seemed to be going routine until the phone had been going thought
-
How to make proficiency rating and objective compulsory.
Hi gurus, Please I need your help, I need to make Proficiency Rating column of appraisal and appraisal objective to be required (i.e compulsory). That is, Appraiser will not be allow to move to step 3, if scores are not awarded to appraisee and objec
-
How do you update the location of linked smart objects?
The new linked smart object feature was a low-key feature but it's fundamentally changing our workflow for the better! Quick question, is there a way to update the paths to linked smart objects or will Photoshop work it out? I can't see a links panel
-
Hi, Could you please let me know whether the Sample CD for Oracle 10g database and application server are available. If yes, please provide me the link for order the CDs. I have forgotten the link. Thanks