Solution for some iPod/iTunes problems...

If you are having one or more of the following problems, Windows may be confusing iPod with a network drive or hard drive and may exhibit strange behavior, like:
-iPod does not show up in iTunes or as disk in Windows Explorer
-iPod does not show up as disk in Windows Explorer (even though disk mode in enabled ont he iPod).
-iTunes and Windows Explorer report the wrong amount of available space on the iPod.
-No songs appear on the iPod after an apprently successful update from iTunes.
-Music copied to mapped network drive instead of iPod.
-The iPod setup assistant appears in iTunes everytime the iPod is connected.
-iTunes displays the "iTunes has detected an iPod in recovery mode- use iTunes to restore" message even after the iPod has been restored.
-The wrong iPod name displays in the iTunes source list.
Please note*changing the iPod drive letter may not affect what letter theiPod uses on subsequent connections, so its not the best long-term solution unless you want to change this everytime you have issues.
To change the drive letter:
-Open Control Panel in Windows
-Go to Administrative Tools
-Go to Computer Management
-Go to Disk Management
-Locate theiPod and right click on it, then click Change drive letter and paths.
-Use the drop-down box to select a new drive letter. Make sure to use a drive letter that is not already assigned to a network drive. The drop-down menu will display all letters that are not assigned to a physical drive, but network drives will stil be listed so be careful. If you arent sure, add a new drive and pick your own letter, something way down the list is best since common drives are A, B, C, D, etc.
-click OK
-Click yes on the confirmation box
-Restart computer
Good luck!!! It worked for me!!!

Honestly, I don't know!! I searched ITunes and IE7 and saw that others were having the same problem I was and that if they stopped using IE7 Itunes started working again.
Basically, I was just proud of dumping Internet Explorer! See, I really love Macs. I had an ibook that finally conked out and i couldn't afford another mac.

Similar Messages

Problem is, when I plug my iPhone 5 into my computer, the computer recognizes the iPhone, but for some reason, iTunes doesn't realize it's there

Alright, I've had this problem for a while now, and I'm at my wit's end. Hope someone can help me.
First of all, I'm running Windows 8.0 on a Lenovo, using iTunes 11.1.5, and an iPhone on iOS 7.0.6.
Problem is, when I plug my iPhone 5 into my computer, the computer recognizes the iPhone, but for some reason, iTunes doesn't realize it's there. On top of that, every time I plug in, my phone gives me the same "Trust this computer?" prompt, like it doesnt recognize the computer I told it to trust 5 seconds ago. A couple times, I got lucky and iTunes dignified me with a "An iPhone has been detected, but could not be identified properly." prompt. I've tried uninstalling and reinstalling the mobile device driver, updating everything, uninstalling and reinstalling iTunes, resetting my iphone settings, but nothing works. Any ideas?

iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

[svn:fx-trunk] 10229: Fixes for some transform effects problems.

Revision: 10229
Author:   [email protected]
Date:     2009-09-14 08:43:43 -0700 (Mon, 14 Sep 2009)
Log Message:
Fixes for some transform effects problems.
- We were not animating the postLayout properties in some cases where we should have, effectively pinning the object in place. We now animate those properties whenever applyChangesPostLayout is true.
- A copy/paste error meant that we did not animate the scaleZ property in cases where we should have.
- A problem in the transform code means that using a null transform center is not the same as a transform center which uses the transformX/Y/Z properties of the target object. We now force the creation/use of a transform center in all cases to avoid that problem.
QE notes: This breaks about a dozen tests in the transform effects area, but I believe the new results are correct and the tests/bitmaps should be changed.
Doc notes: None
Bugs: sdk-23177
Reviewer: Hans
Tests run: checkintests, Mustella transform effects
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-23177
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/AnimateTransform.as

How do I get all of the music on my computer to transfer to my Iphone? For some reason, itunes has picked up some songs but not others. example, I have several CD's loaded in which only 1 or 2 songs from the CD shows up in itunes.

I have about 70 Cd's loaded on my computer as I had previously owned another MP3 device before I got enamored with the Ipad and Iphone. My problem is itunes will not recognize all of this music. To give a specific example, I have an old Bon Jovi Cd "crossroads" , itunes only recognizes 2 songs off the Cd. How can I get itunes to recognize these songs? They do not show up on itunes anywhere but if i go to my music folder I can locate the songs and it even shows the itunes logo but, the songs will not play with itunes. I've got a few hours of music i would like to have on my iphone. Can anyone please help me with this?

It has always been very basic to always maintain a backup copy of your computer for this very occasion.
Use your backup copy to put everything on the computer, then sync.
If for some reason you have failed to maintain a backup, not good, then you can transfer itunes purchases from your iphone to your computer - File>Devices>Transfer Purchases

Possible Solution to Frozen iPod, iTunes not responding and sad folder

There may be hope for frozen iPods, unresponsive iTunes and sad folders. This solution is totally anecdotal at this point as it only has worked on my iPod. However, try it you got nothing to lose. Our iPods broken right? It's a $300 paper weight right?
History
My iPod 4G 20GB started skipping songs then rebooted and gave me the sad folder. I reset and everything went downhill from there. I would:
- not be recognized in My Computer
-when I did get a drive on My Computer it would lock up My Computer
-reboot and either give me sad folder or Menu with no songs
-refuse to be updated
-be seen in Device Manager as ipod both with Firewire and USB connections
I read through the many threads here and tried all Apple's Solutions to no avail. I even called and they told me, very nicely and free of charge, that I would have to send it in and because the repair price was such to "look at the new models to see which one I wold like". I was totally bummed. I went and bought an new Nano 4GB (with warranty this time) swearing I would never buy another with a HDD again until they became more reliable. I even tried the smack it to get the disk head unstuck method. I figure my iPod was a paper weight at this point so what the ****.(Oddly this method works rather well with all sorts of broken electronics)
Solution
Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
- I tried the 5in1 test and got and error on Firewire.
- I did the HDD R/W and surprisingly it passed.
- I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
iPod 4G 20GB Windows XP
Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
hp a330n Windows XP

My ipod only gets the sad logo and whenever I try to start it up I can hear the hard drive trying to start and then failing and it does so like 3 or 4 times. After I read your post I wanted to try that diagnostic thing but I can't get it into that mode. How long should I have to hold select and back? After I reset the ipod, it goes to the sad face, the hard drive seems to fail a few times and then the screen goes blank and stays like that for as long as I hold those buttons. I'm so sick and tired of dealing with a broken ipod but I really want to get this thing working again so I can never buy another Apple product again. Thanks.

WRT610N V1 - Solution for not connecting iTunes to Apple TV

I have a solution for anyone with a WRT610N(V1)who is having problems (BTW this will work with V2 router also). I could not connect my iTunes to my apple TV, or it would appear fleetingly. Same problem using my iPad as a remote.
The issues you are having are to do with the firmware. Last year Cisco stopped performing firmware updates for version 1 (V1) of their router and fixed all your/my issues for their Version 2 router (V2) [Look on bottom of your router for version number - it is after the model number].
The fix, as obvious as it might be, is to load the V2 firmware on your V1 router.
Firstly go to the Cisco download page for the WRT610N router (http://homesupport.cisco.com/en-us/wireless/lbc/WRT610N/download)
Select Version 2.0 as your model (yes I know this is wrong and will make you sweat a little)
Download firmware upgrade to an easy to find location on your computer (I used desktop). You will now have downloaded file FWWRT610N_2.00.00.05_20090710code.bin.
Go to your router admin function (if you don't know, just type 192.168.1.1 into your browser) Default User ID is admin and leave password blank.
You will now see the Linksys router administrative application.
Click on "Administration"
After you have done that you should see "Firmware Upgrade"
Click on "Firmware Upgrade"
Select the file I mention earlier from the location to which you downloaded it.
Allow router to upgrade (you do not need to do anything to router once it is finished).
Go to apple TV and bask in the fact that you now have a fully functional apple TV with iTunes happily available.
I am sorry if these instructions are a little simplistic, but I wrote them trying to help anyone who is used to just opening a box and ignoring the manuals (like me!)
Good luck and Merry Christmas

Solution for people who have linksys WRT610N. I hope you find this and it helps!
The Grendel!

Laptop has been repaired and for some reason itunes library has been wiped. Ipad still has all the music on, is there a way i can repopulate itunes?

My laptop has been repaired and for some reason my library on itunes has been wiped. Didn't pay attention and synced my iphone so have lost all the tunes off that now too. Ipad still has all the music on, is there an easy and free way to repopulate itunes from the music on the ipad?

See Recover your iTunes library from your iPod or iOS device.
tt2

For some reason itunes will not even open It is asking me to reinstall? PLease advise. I do not want to loose all of my music, apps, video etc help!

Can someone help with itunes, for some reason all of a sudden my iteunes will not open. It wants me to reinstall.
I do not want to loose anything. My 2 children have itunes and they have a music list as well as many apps. please help???

Adobe is a company... do you mean Acrobat?
>subscription to Creative cloud cs6
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

HT4061 my iphone 4 battery went dead then when i went to charge it the plug into itunes came up as its gone into recovery for some reason, itunes is only giving me the option to restore which i dont want to do as i have photos of my babys !! help me !!

please help!! my iphone 4 battery died then when i tried to charge it the plug into itunes came up as my phone has gone into recovery mode for some stupid reason! i have tried tinyumbrella as itunes is giving me no other option but to restore, i dont want to restore as i have very important photos of my babies that i havnt backed up yet and CANT loose!! iv tried holding the 2 buttons intogether but that doesnt work either ! there is bound to be a way around this without loosing my photos. im tamping with apple, this shouldnt happen ! aswell as worring bout loosing all my photos and now i have no phone so am paying for a contract that doesnt even work . please please please helppppppp ! x

If your phone is in recovery mode, all the data on it, including those photos, is already lost. Leaving important photos on a phone for any length of time, such as baby pictures, as you've found out is a terrible idea.
You've no option but to restore your phone.

A solution for Secure Static Versioning problem in 1.5.0_10

Hi,
I have JRE 1.3.1_09 and 1.5.0_10 on my computer and I think I have solved static versioning problem.
My test computer:
- Windows XP sp2
- Internet Explorer 7 (on another computer also IE 6)
- Firefox 2.0.0.1
- JRE 1.3.1_09
- JRE 1.5.0_10
I. Solution for Internet Explorer 6 and Internet Explorer 7
1. Edit registry and add:
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Deployment\Policy
DWORD: EnableSecureStaticVersioning = 0 (Hex)
2. Restart browser if started.
3. Start web page with java applet.
II. Solution for Firefox 2.0.0.1:
1. Install 1.3 JRE in the same parent directory as 1.5 JRE.
Because default default installation path for 1.5 JRE is C:\Program Files\Java\jre1.5.0_10 you need to modify
1.3 installation path from default C:\Program Files\JavaSoft\JRE\1.3.1_09 to C:\Program Files\Java\jre1.3.1_09
After installation check out that "bin" directory is in the following path:
C:\Program Files\Java\jre1.3.1_09\bin
2. Install 1.5 JRE in default installation directory: C:\Program Files\Java\jre1.5.0_10.
After installation check out that "bin" directory is in the following path:
C:\Program Files\Java\jre1.3.1_09\bin
3. Restart browser if started.
4. Start web page with java applet.
Note: HTML page must use <object> tabs for Internet Explorer or <embed> tabs for any other browser (e.g. Firefox). You need to specify correct classid in object and/or embed tag.
P.S. If anyone would like to discuss with me send me an e-mail to [email protected], but please post question to forum and just mail me a link to forum. I will write my answer to forum.
Hope this helps,
Grofaty

I have been trying to find a solution for this issue at our organization for over 6 months. Finally, we have a work around to run multiple java versions for newer and aging java apps.
Thanks,
Adunlow

QuickTime Pro solution for my iPod conversions?

Hi!
I am looking for an application to convert video to iPod-readable format. 3 questions:
1. Would QuickTime Pro (QT Pro) be a solution for my needs?
2. What can QT Pro convert?
3. What QT pro cannot convert?
Thks.

Don't know about iPod. Still haven't got one. Can ya believe it!
As far as your import/export question...http://www.apple.com/quicktime/pro/specs.html
iMac G4 FCP4/FCE2.0.3 QTPro 7.0.3 Mac OS X (10.3.9)

Need Solution for iWeb/QuickTime viewing problem in IE 6 for Windows

When viewing an iWeb page in IE 6 for Windows with a background picture and a QuickTime movie embeded, the QT movie frame will "smear" when the page is scrolled. More specifically, The QT movie frame will not lock into its proper position as long as the page has a background picture selected in iWeb when viewing w/ IE 6 for Windows. Does anyone know of a solution for this? Does this problem still exist w/ later versions of IE for Windows?
By the way, if you don't already know this, changing the Page Background setting back to the default of 'Color Fill' in iWeb and republishing will not correct the problem once a background picture is selected for a page. You have to set the Page Background setting to 'None' and republish. The movie frame will then be locked into place when scrolling the page in IE 6 for Windows.
MBP 17in (1 GB RAM), PB G4 15in, PB G4 12in, iMac G3 Mac OS X (10.4.7) Loyal to Apple since the Apple ][+

Someone else posted that you may have to remove the image altogether, publish, then place the replacement image. The images for the background of my newest pages use this as a tiled background successfully.
http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Images/background.jpg
I'm not sure how well tiling would work on your page though since it would begin to repeat vertically when you don't want it to (for me, tiling is exactly what I needed).

Finally a SOLUTION for the black-screen problem!

It took me almost a MONTH to find a solution to this wide-spread problem - and I had to do it by myself.
I've got a Qosmio x300 (about 18 months old) and started having the black screen / lock-down problem about 6 months ago but it was sporadic. When it started getting worse, I took it in for repair, made sure it was cleaned religiously, had both a cooling pad and household fan directed at it to eliminate any possible overheating issue, made sure all of the *Toshiba* drivers were up to date according to their site, etc... The problem kept getting worse - to the point where I couldn't even open a browser without the dumb thing crashing. VERY frustrating to say the least.
Finally I gave up - I removed the nVidia driver that ran the GeForce 9700M GTS video card and used the standard VGA driver. No more lock downs, but it limited what I could do because the on-board memory wasn't being utilized. I re-installed the *Toshiba* drivers for the card and presto - lock-downs again.
Fed up, I went directly to the nVidia download page and chose to have it automatically detect my card. Now, granted, it says to try to use the OEM versions of graphics, but Toshiba's drivers are FLAWED! I installed the driver suggested directly from nVidia, and what do you know? Full use of the card again and not a single crash!
I hope all of my frustration, and the solution that resulted from it, can help someone else not have to waste time, money, and hair on their heads as it did with me. =) The sad part about it all - this is a TOSHIBA flaw that affects a wide range of systems and models - and nothing has or is being done about it.
Good luck! =)
Dave (Montreal, Canada)

Which version of the nVidia driver did you use?

Hi, I have updated my Itunes to 12.0.1.16 Before the update I had 10gb of free space on my Iphone 5S, now for some reason Itunes is saying im 26gb over capacity. I for some reason appaer to have gained over 40gb of Other space Any ideas

I had 10gb free space on my IPhone 5s
I have updated ITunes to the new version this evening
Now when syncing my phone it says I am 26gb over capacity and also OTHER has increased to over 40gb"
Any ideas anyone

I found the culprit in my case: after update to itunes 12 iPhone is X GB over the limit.
Check your sync settings for each type of content in the left sidebar. In my case I had sync turned off for everything but ringtones. After iTunes update for some reason the entire music library is set to sync with the phone. Turning it off reconciled the storage issue. Perhaps in your case it is some other new content marked for syncing.

Solution for 4g ipods which arent recognized by itunes

go buy a USB 2.0 hub, it costs around $6 here in Manila where im from. i used to use my pod with a firewire cable (the usb 2.0 card thats attached to my pc just wont work in my pod) but now, usb works with this new usb 2.0 HUB!!

I've now uninstalled the USB device driver but now my iPod listed as a "portable device" and no longer listed under Apple MobileDevice

Solution for some iPod/iTunes problems...

Similar Messages

Maybe you are looking for