Solution for Usage Monitoring ??

Hey All!
We are in need of a solution which can provide us with detailed analysis of SAP users performance in our Production system. The situation is that we need to have a control over our licensing cost and monitor the usage that our end users are performing on Production client.
So If anybody is aware of any such standard or third party solution then i would really like to know which one.
Regards
Bilal Nazir

I see a lot of problems with your idea.
1) Do you have a hub with 1 Gb ports???
2) You probably will create a loop conecting both switches
3) STP will be blocking the ports
4) Should be there a lot of collision
etc.
I suggest you use your sensor to monitor only one port.
Alberto Giorgi from Spain.

Similar Messages

Best solution for 2+ monitors CS6

After reading discussions about the flaws of external hardware (matrox, BM, AJA) - or at least the drivers needed, I want to find the right solution for using two computer monitors for my Workspaces and a third (HDMI or HD SDI) output for a 37-inch program monitor (not broadcast, but decent Panansonic LED). I have been reading tons of specs and posts... what is best? I am planning a new CS6 workstation
     1. Dual Quadro 4000s
     2. Dual GTX 570s or 680s
     3. some new idea??
Why can't Nvidia make all three ports active on the Quadros?
Wishing Adobe would post more than just minimum specs, but some kind of details on levels of workstations based on types of workflows...
Thanks,
Diane
PS I've been using a $50 HP USB signal splitter on CS5 for a couple of months - it's been great - allowing me to spread my Workspace across two monitors with HDMI to the panny monitor. But that can't really be The Solution, can it?!?

GTX 670/680 cards support up to 4 monitors. Dual cards are not supported, nor is there a need for with the Kepler range of cards. Well, a bit more detail, you can install two cards if they use the same driver, but only one will be used by PR and the other only for steering monitors and that is a bit expensive with Quadros or the GTX 570/580, when a single 670/680 does the same job at much lesser cost and with better performance on most systems.

Solution for port monitoring

hello everybody,
we have 2 core 3550 12-G switch. the desktop switch a connected via gigainterface to the core switches. so, i will monitoring all the traffic in the vlans, what can i do? i have only one monitoring port on my 4210 ips. its a good solution when i make one monitor session on the first core switch and one monitor session on the second core switch. the sourceports for example: range giga 0/1 to giga 0/8 the destinaton port giga 0/10. on the destination port i plug a cable to a hub. from the second destination port on the other core switch i plug the cable to the same hub, so i can take one cable to the monitor interface on the ips from the hub.
many thanks for an answer...

I see a lot of problems with your idea.
1) Do you have a hub with 1 Gb ports???
2) You probably will create a loop conecting both switches
3) STP will be blocking the ports
4) Should be there a lot of collision
etc.
I suggest you use your sensor to monitor only one port.
Alberto Giorgi from Spain.

Solution for multiple monitors

somebody ask how to connect multiple monitors to lenovo laptor.
here
http://www.ixbt.com/news/hard/index.shtml?15/28/50
(in russian language) is a solution to convert USB 3.0 port to HDMI.
Stas.

Hi,
    The underlying technology comes from Displaylink. Most, if not all, of the USB to video solutions are based on their chips. See:
Displaylink
    I have two different Displaylink based devices, both USB 2.0. They work great with the w520, even when running full screen video at 1920 x 1200.
    Perhaps I would prefer USB 3.0 which is coming out now. Of course the downside of USB 3 is that the mini-dock doesn't support it. I use my third monitor mostly for text, so USB 2 is just fine, and stays plugged in to the mini-dock always.
                                                                Best, ZZ

One more solution for Silent Monitoring Windows 7 64-Bit - ERROR VOIP2037 Unable to open the NIC adapter for sniffing.

Hi,
we are using UCCX 8.5 SU3.
After replacing the actual agent workstations with Windows 7 64-bit we had to face problems with the silent monitoring. (no sound at all and in the CSD the usual error popup "Silent Monitor-Session failed...").
In the CAD logfile I found the errorcode. "ERROR VOIP2037 Unable to open the NIC adapter for sniffing. Please reconfigure the installation."
After investigating the logfiles, starting postinstall.exe a hundred times and reading the Configuring and Troubleshooting VoIP Monitoring Guide.
I just learnt about the wonderful tool nicq.exe.
And so i found out that the driver spcd.sys wasn't installed.
Check in the registry for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SPCD"
It seems to me that the "Cisco Supervisor Desktop.msi" never installs the driver one a Windows 7 64-bit.
After starting the NICQ.EXE as administrator the driver is being installed.
Test 1: Check Driver Status
Driver not installed. Attempting to install it...
Driver has now been successfully installed.
SPCD Driver service is not running. Attempting to start it...
SPCD Driver service is now running.
Test 1: SUCCESS
And after that the silent monitoring works again like a charm.
Maybe that info help someone.
kind regards, sebastian

Excellent information, this has been driving me crazy for a while now. Once i saw this info I was able to get it resolved rather quickly.
+5 for you, (I tried to click it above but it would not let me.)

Most cost effective solution for HD monitoring

MXO box to display, Deck Link through HDMI or simple steal a professional HD monitor and face the consequences. Too many options? any suggestions?
Much Thanks, Matt

Practically in use everyday for the past 2 years with the MXO. I use an MXO2 for editing on the road with my Macbook Pro (producer makes sure I'm booked in hotels with HDMI Flatscreens).
I also use the Blackmagic Intensity Pro for inexpensive HD monitoring. The card is cheaper than the TV I use to monitor.
best to you
dj

Best Solution for 3 Monitors

I want to plug in an extra monitor to my 2 monitors.
I already have one Ati x1900.
Any configurations and video cards that you suggest?

You're spamming the forum with redundant threads.
We are just users and this is for trying to solve problems. Most people will bend over backwards here, if it is something like how to resolve or troubleshooting hardware and software.
Get 7300GT probably.
Run Apple Hardware Test to check out your system.
Make sure you have a 1500VA UPS and it is on a dedicate circuit (at least not shared with anything heavy).
AppleCare and Customer Service - can't help there. And Apple doesn't hang out here.

Solutions for previewing HDV via video monitors ?

I have recently been given the task of setting up a video editing suite combining:
FCP6
HVR-1500 decks
Panasonic BT-LH1700WE LCD video monitors
FX7E HDV cameras
I've read that it is not possible to preview HDV via firewire and this seems to be the case thus rendering the Video preview monitors useless via the decks at least.
My question is what would we need to get in order to get a live broadcast preview to the monitors ?
Many thanks in advance.
-matt

Ok so i've done a little research and it seems like The Matrox MXO would be the best solution for our needs.
Does anybody have any experiance with this or a similar output device ?

Solution manager for performance monitoring

Hi,
We have implemented solution manager in our project.Can anyone tell me how is this useful for performance monitoring and how can we check expensive sql statements using this.
It would be helpful if anyone can provide me some documentation on this.
Thanks

Hi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce89c290-0201-0010-5985-dd64605111fd
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/3f99cc89-0701-0010-9c86-eae847ae6cd2
refer above threads,
Thanks
Syf

BB usage monitor for 1 month ?

OK, just found the account linked usage monitor, and can see what has been recorded month to date.
Allowing for the fact it's a new tool, it would be nice to see previous months' data too, to assess trending vs. best service selection.
I can't see a way of selecting a date range, say from when the tool started until today though - is this available elsewhere? I presume the data is captured somehow by BT for quarterly billing support.

Numb3r6 wrote:
OK, just found the account linked usage monitor, and can see what has been recorded month to date.
Allowing for the fact it's a new tool, it would be nice to see previous months' data too, to assess trending vs. best service selection.
I can't see a way of selecting a date range, say from when the tool started until today though - is this available elsewhere? I presume the data is captured somehow by BT for quarterly billing support.
Hi.
A number of "us" have already pointed this out. You can keep your own figures of course, say in a spreadsheet. The only problem is the silly fault with the system (not yet acknowledged) in that the figures for last day of the month (and hence the overall previous month's figures) are not available.
The meter shows the usage up to midnight the previous day - but does not d this when the day is 1st of the month. At the beginning of November, the meter was reset and the figures for 31st October (and hence the whole month) were not available.
The meter was supposed to go live at the beggining of October, but was delayed until 4th. It's possible that the flaw as seen above may have caused a problem and delayed the implementation.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Internet / Data Usage Application for the z10? DATA MONITOR, DATA USAGE MONITOR, DATA ANALYSER, DATA USAGE APPLICATION

Please can RIM / Blackberry develope for the z10 an Internet Data Usage Tracker or Internet Data Usage Monitor for 4G / 3G / WiFi / Edge !
IF YOU AGREE, PLEASE LIKE THIS THREAD AND COMMENT "I agree if you like"

If you agree, click on like above..
-: DrewRead :-
Can't find an app on Blackberry World yet? Tweet the developer and ask when they will #GetWithBB10 !!
"Like it" if you like it.

CCMS is used for system monitoring , why should we use solution manage ?

CCMS is used for system monitoring , why should we use solution manage ?
Whats the relationship between CCMS system and SolMan?
Thank you .

hi,
I just want to ask a question. At our client we have solution manager and CCMS. There is data in CCMS I can extract, it is loading on BW side ok the same number of recs, but the problem on CCMS cubes says there are the same number of record in the cube and also showing as the data is ready for the reporting. But when I run the report and view the data as listcube it is empty.
ANy of you have the situation like this cube say it has the data but when do th BEX or infocube contents the cube is empty nothing in there. The same thing is happening with hourly, 15 minute and daily cubes.
Anyhelp on this matter is appreciated

Battery Solutions for iPhone 5 - From 4 to 12 hours Usage

Battery Solutions for iPhone 5 - From 4 to 12 hours Usage
First:
iCloud sync is a great battery consumer
1** iCloud: turn off mail, safari and reminders. Only keep contacts, notes, photo stream and documents data
2** Use cellular data for iCloud documents and reading list only.
3** Notes to save on iPhone, not on iCloud.
4* Avoid downloading new Apps or updates if not on power. It's better to download all updates on a computer and synchronise to update them.
5* Avoid looking at videos on line if not on power.
6* Games consume a lot
Second: if not enough
7* Brightness to bring on top of the letter "t" of Brightness. Sometimes the brightness goes automatically to 75%, too high. Put it back.
8* In mail, fetch new data, advanced, check that all accounts are fetch manual
Third: Additional Optional tips
9* Wifi ask to join networks off
10* Bluetooth off when no need, turn off WiFi if in an area with no WiFi, avoid Personal Hotspot: great battery consumer.
11* Turn off iPhone manually. Don't wait for iPhone to turn it off.
12* Let the battery exhaust totally until it turns off before to recharge it.
13 Kill The Apps unused from time to time, in case one application uses too much in back ground
14 The Reset All Settings solves nothing. It just creates problems to rekey in everything.

Just a followup:
To summarize: I upgraded to an iPhone 5 a few days ago and the first thing I did was restore from my iPhone 4 iCloud backup. After that I was experiencing the things some people here complain of: running hot and battery draining quickly.
But I then reset as a new iPhone and synced in all my apps, music, photos, etc. from iTunes and now it is running cool - even after using it continually for 90 minutes or 2 hours and the battery drain is acceptably within specs.
This screen shows
Usage: 4 Hours, 0 Minutes
Standby: 19 Hours, 28 Minutes
Battery at 44%.
That would "multiply out" to
Usage: 7 Hours, 14 Minutes
Standby: over 34 hours
when the battery is fully used up.
I believe that is pretty reasonable and within specs.
I will try an experiment after my next full charge of turning off cellular data though (except when absolutely needed) for comparison.
I'm not saying some people aren't having some power-draining issue due to their carrier. But even without 5 bars standing the issue for me seemed to have been the attempt to restore from my iPhone 4's iCloud backup instead of installing as a new iPhone and syncing.
Screenshot:https://www.dropbox.com/s/xnfkaw6525b4a02/Photo%20Oct%2029%2C%207%2038%2008%20AM .png
doug

Solution for monitor power supply and raid 5 on x4150 server

Hi everybody,
a simple question :
my compagny have some server SunFire x4150 in some Datacenter, and there is a thing that we cannot really monitored remotly : the status of the 2 power supply and the status of the raid 5 of the server.
(i want to know if a power is down or if a disk is "dead")
We are using Nagios, cacti and munin actually, so can we use these interfaces for that?
if the answer is no, a script can be developed , if only i knew the command that can be used to take informations from the state of the raid5, i'll comunicate later the type of the raid card.
what are the best solutions availables for monitor those things?
thanks by advance

We have some x4150s but they're running Linux. There are separate solutions for each of the 2 problems.
1. For the power supplies, you can use the ELOM/ILOM system management interface (also used for monitoring the fans and temperature). If you've got it configured and connected to the network, you can set it up to email you about any events. We have the older ELOM firmware running, which includes the ability to add some actions to take in response to specific events. The new and supposedly better ILOM firmware doesn't seem to include this. Since this is IPMI compatible you can probably also hook into this using ipmitool or SNMP tools.
2. For the RAID card, assuming it's the standard Adaptec (rebranded as StorageTek) controller, you can install and use StorMan software (it's on the tools & drivers CD if not pre-installed). Once again you can configure email notification from the StorMan GUI, but this time it relies on OS host services to do the mail forwarding via the host NIC.
I'm not familiar with the details of your network system admin tools, but hopefully these tips will provide pointers on what hooks are available for these tools to tie into. Presumably there's also Sun N1 management software which can probably do this in a more built-in way, but it sounds like you've already got more than enough management tools.

WHERE IS OUR USAGE MONITOR BT

Hi,
Now this is a COMPLETE RANT!
I am FED UP with my teeth seeing people talk about being threatened by increase of bills or changing contracts to the next product up because their usage is more than the product they have paid into.
For example, BT Bullies Granny , BT Charging for excessive use and wait for it, Went Over Option 1 FUP.....How To Upgrade? All of this when, NO USAGE MONITOR exists on the BT Website.
This really frustrates me because people are being pushed by upgrading to the next option where there could actually be better deals, lets face it, if a product does not work with the client, why continue with that product - move on! Im sure you would revert back to Heinz Beans compared to Tesco Value Beans a!
Another item that really frustrates me is how BT looks after it's customers, the lack of any compassion and bullying to make sure those who are struggling to pay bills on time get either cut off or phone numbers changed. Also, increasing direct debit payments which do not match the persons circumstances of calls and line rental, ok maybe one month you spent £2 more than normal,does not constitue an increase your DD from £30 to £75 pcm hay!
BT, you seem to be spitting in our faces, YOU are serving us as customers in a very bad way, WE are trying to advise YOU how YOU can help us, PLEASE LISTEN TO US, give us a USAGE MONITOR, GET RID of the term UNLIMITED, it is not an industry term which includes FUP, TELL US what we are paying for, something easy to understand with NO SMALL PRINT.
LISTEN so we can all be heard!
CG
CG Over An Out
Solved!
Go to Solution.

submarinex1 wrote:
Owlie wrote:
Think the way you wove the term Granny and blew her allowance should be classified as an offensive remark that sterotypes the older generation with limited resources as a legitimate target for ridicule.
Being old or elderly comes to us all eventually. . .
We all don't have the brain of our youths and this can be distressing. . . as can remarks from youths or the ill-mannered.
well i have a friend who is 73 who spends alot time downloading flightsim planes, and playing on his xbox and internet and mail and ive yet to hear him complain hes gone over his limit.
your age comments have no meaning, since for one its not even the woman used in the example who has posted, shes not technicaly a granny either since it was his mother and bt did not bully her. and where does it sterotype anyone. and what has limited resources have to do with anything, nice try on a posh sounding post though. what we really need to do now is find a 90 year old who downloads 100g xbox demos and music a month who keeps being told hes over his limit and ask him how he feels.
have a look at www.downloads.com they do free stuff for pc and mac and its cnet so its safe.
It is not the case of stereotyping or ageism that is the problem, the problem is BT a large worldwide organisation can not provide a utility to advise its customers there usage of broadband by day month or period, others can provide this, my mobile operator provides this so why not BT!
CG Over An Out

Solution for Usage Monitoring ??

Similar Messages

Maybe you are looking for