Solution for waiting for changes to be applied for iphone

Hey I see that others are having same issue with waiting for step 7 of 7 waiting for changes to be applied. and good solution people have found or apple fixed? Thanks

What seems to work for me is to uncheck photos (then sync) and recheck photos (sync).
If the sync doesn't work I 'X' out to cancel the never ending sync, unplug then reconnect iPhone and try again.
My first iPhone, being the 4S and in my research it seems this issue goes back to early 2011. Apple c'mon.

Similar Messages

Hello everyone. I have my itunes account for some years, and i've purchased far too many apps and music. Now the company i work for, has to change my account in the iphone, in order to use the corporate mails and calendar. How can i keep my applications?

Hello everyone. I have my itunes account for some years, and i've purchased far too many apps and music. Now the company i work for, has to change my account in the iphone, in order to use the corporate mails and calendar. How can i keep my applications and music?

Read here:
http://support.apple.com/kb/ht5621
Changing your Apple ID to your current, working email address will not create another Apple ID, it will only change it to your working email address.

Whilst syncing "waiting for changes to be applied" error // iphone 4s

Hi Guys,
I am experiencing a "pause" in syncing when the iphone is connected resulting in a message "waiting for changes to be applied".......
Has anyone experienced the same problem?
Removing the iphone photo cache as suggested elsewhere has not solved the problem either, nor has restoring the iphone (twice).
Thanks

What seems to work for me is to uncheck photos (then sync) and recheck photos (sync).
If the sync doesn't work I 'X' out to cancel the never ending sync, unplug then reconnect iPhone and try again.
My first iPhone, being the 4S and in my research it seems this issue goes back to early 2011. Apple c'mon.

How can I change my security password because I can't rmember it and I've spoke to an apple person and when they tell me to go to Apple ID and then go to Manage My Account, theres nothing there for me to change. It asks for my answers, which I don't know.

I called the apple guy, he told me where to go. It was incorrect. I went to the FAQ and the answer was there, but on my computer it was still incorrect. I just don't know what to do. It wont let me download anything on my iphone now until i can answer the questions. i need serious help.

I would advise to call AppleCare and have them take a further look in to the matter.
The number is 1800-275-2273

Solution: Syncing with my iTunes library an endless headache: Songs don't transfer, or songs transfer and show up as "other," or I get double copies, or "Over Capacity," or stuck on "waiting for changes to be applied."

iPod Touch 5g, 64GB, iOS 7.1. After my iPod data began showing up "Other," after an abrupt disconnection from iTunes during a sync I've spent the last week trying to fix it only to be thwarted at every attempt. I've tried resetting and restoring 6 or 7 times now, and all goes well until it gets to copying my library of music over. What I finally figured out is that 8,000+ songs is too many for iTunes to process all at once for some reason.
After several nights of leaving it connected all night I would find that the songs had physically copied and were occupying the ~45 gb of space on my iPod's storage, but were not showing up on my local library, instead listed as "Other" in iTunes and otherwise unusuable, or they would show up, but I'd have ~45 gigs of "Other," 45 gigs of "Audio," and would be "Over Capacity," by 30 gigs or so. OR it would be "Waiting for Changes to be Applied," for 12+ hours.
My work around: In iTunes, under the "Music" / "Sync Music" tab, instead of syncing "Entire Music Library," select "Selected Playlists, Artists, Albums, and Genres." You will have to indivually select the playlists, artists, albums, or genres and kept each bulk tansfer to <2000 songs at a time. The easiest way for me to do this was by selecting one genre at a time and copying it over. I had already taken the time to organize my library into 10 genres, you probably have more than 10. This is irritating and time consuming, but it's better than resetting my iPod over and over and over again to no avail.
Waiting for Changes? What iTunes is actually doing when it says it is "Waiting for Changes," or "Waiting for Items to Copy." iTunes for whatever reason does not reveal the relevent data being processed during a sync (didn't it used to?), but there are a couple ways you can decipher what it is actually up to. The first option is on the iPod; under Settings>General>iTunes Wi-Fi Sync it will tell you what it is up to during syncing. The other way on the iPod; under Music>Songs, scroll all the way to the bottom to see where it is at in the process. What iTunes, iTunes Wi-Fi Sync, and the bottom of the Songs library report are not always in agreement, but seeing all three will give you a better approximation of where you are in the syncing process and whether or not it is hanging.
This for me was successful as a workaround, but this is not a solution. Apple needs to fix this crap. Maybe they just want to make it so difficult to have a physical library of music on the local storage of the iPod that we will just give up and sign up for their Match service.

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

Stuck 'Waiting for changes to be applied', takes 2 hours to START syncing

Every time I sync my iPhone 4S with iTunes, it goes fine up until 'Waiting for changes to be applied'. I dread having to update content on my iPhone on my computer because I know it will take ages. Every time I sync, it gets stuck on 'Waiting for changes to be applied' for about 2 hours, then it will START adding the new content I want (which is not a significant amount). I have tried restoring from backup, I even wiped the phone and started fresh, and still, to update my music library on my phone, it takes me a few hours. I am not talking updating hundreds of songs, I am talking a few dozen songs or maybe adding a few podcast episodes or audiobook chapters.
I have a large iTunes library so I have checked off genres and artists I want synced because there would be no room for the entire library.
What causes the sync to get stuck on 'Waiting for changes to be applied' for so long. What (if any) solution is there to this issue? Would really appreciate any tips.

Every time I sync my iPhone 4S with iTunes, it goes fine up until 'Waiting for changes to be applied'. I dread having to update content on my iPhone on my computer because I know it will take ages. Every time I sync, it gets stuck on 'Waiting for changes to be applied' for about 2 hours, then it will START adding the new content I want (which is not a significant amount). I have tried restoring from backup, I even wiped the phone and started fresh, and still, to update my music library on my phone, it takes me a few hours. I am not talking updating hundreds of songs, I am talking a few dozen songs or maybe adding a few podcast episodes or audiobook chapters.
I have a large iTunes library so I have checked off genres and artists I want synced because there would be no room for the entire library.
What causes the sync to get stuck on 'Waiting for changes to be applied' for so long. What (if any) solution is there to this issue? Would really appreciate any tips.

Changing the default view for Line Items in an Auction.

Hello All,
We have a version 5 client who is asking for us to change the default view for line items in an auction.
Currently, if you have an auction setup, and you go to the Line Items tab, the default view is the "Basic View". The client would like to change the Default from "basic view" to "price view".
Is there a way to change this default in the system? Can this be configured using query groups? Any information would be helpful.

Hi wood cloud,
This is not possible, bcz there is no VLV for that drop down and we cant set it to the price view.
Thanks,
Ankur Goyal

How to change the collecting interval for saposcol within the saphostexec

Hi,
we have installed the SAPHOSTAGENT package for 7.00 which includes also saposcol to start together with the saphostexec program. Now the collecting interval for saposcol is changed from 10s (default for saposcol) to now 60s.
How could we change this back to 10s ? Is there a parameter for the host_profile ?
I never found a list of available parameters for the saphostexec (host_profile).
Thank you for comments

Hello
> I never found a list of available parameters for the saphostexec (host_profile).
available parameters can be found in the Online documentation: "[Profile Parameters for Central Monitoring|http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/994d74018151d5e10000000a1553f7/frameset.htm]".
But the really ugly thing is that the neccessary parameter
> How could we change this back to 10s ? Is there a parameter for the host_profile ?
is not listed here
But you will find it in "[Controlling SAPOSCOL from the Operating System|http://help.sap.com/saphelp_nwpi71/helpdata/EN/49/99b6e09282423be10000000a421938/frameset.htm]": hostexec/oscol/arguments. Also have a look at the example that is mentioned at the end of the table.
Regards, Michael

NW7.1 - Change of Backend Destination for existing SWCV

Hi,
I have a question regarding the Backend Destination that one specifies while creating a SWCV. The scenario is as below -
1] I have created a SWCV which has my data objects & sub gens which uses Destination D1.
2] Now I want to make this SWCV connect to a different backend system. Hence I created a new RFC destination D2. Please note that the interfaces are the same - just the system is different.
3] I can switch the Backend Destination for the entire SWCV from D1 to D2 and save the change.
4] But if I see the Backend Adapters for individual data objects, I still see them pointing to D1. Also, this is non-editable.
My quesiton is - Is it possible for me to change the Backend Destination for generated data objects in an existing SWCV? Or do I need to re-import the data objects in a new SWCV for use with the new backend destination?
Thanks in advance!
Best regards,
Sandeep.

Hi Sandeep,
You can go to Configuration Tab in the administration console, then chose Backend Configuration-> Then select your SWCV and the data object for which you have to change the backend destination.
The only pain point here is you have to do individually for every dataobject in your SWCV.
Best Regards,
Siva.

Changing duration after applying motion properties?

I have a series of still images that I applied scaling and motion to and I now want to change their duration so I right-click, choose Speed/Duration and change the timecode for the duration to make the still image take less time on screen. After doing this the scaling and motion no longer work. Is there a way to change still image duration after applying scaling and motion to them?
Thanks.

Looking for some answers (Oh I realise this thread is 1 year old!) about clips duration I bumped into this one. I wonder if part of the above problem had something to do with pictures coming from different cameras - I seemed to notice that with the same preference choice some clips seem to interpret the duration differently? Probably when the aspect ratio is different from one camera to another, or if one has changed his or her aspect ratio on that camera in a shooting session.
I do remember that to change the duration default via preference it has to be done before importing photos in the project windows or has someone pointed out, re import them after changing the default.,
I also thought after changing the duration of clips that had key frame for various functions, the new duration may have excluded those key frames because the shortening had truncated the part where the end key frames were, thus making them void.
(I'm a little surprised to be in this thread as I had written in the "question" field "still images duration" and was in another thread with 5 entries, the last one from Anne Benz with a shot of a time line, also from Oct 2012! But some how when I tried to add to it, I could not and found for unknown reason I was not signed on! But now I come back signed on with the same question I'm in the different thread?)
Perhaps the following may be interesting and helpful for some. Changing duration of still in the time line can be quite useful when one needs to match the Video sequence with its added Audio. As you have a display of stills with transitions, animation etc. and you add some music to it. If they don't quite finish at the desire point. (usually with the end of the music, song). You can fine tune it (like within a few seconds) by shortening or lengthening the clip, clips duration. And if it's ok with what you have you can select the whole (video) time line and after deciding how much is the difference between your portion of music and your clips apply that time. Sometimes using only a few clips is enough other times the whole of it works better. I find it's ok only for a few seconds though as there are a couple of problem with this, The key frames may need to be readjusted and or even be out of action (as explained earlier) In that case it's probably better to have the video clips on a sequence of their own then add the music on a new sequence and match them this way on the same time line.
PS: Titles and anything relying in proper timing placement above this video display timeline needs to be checked, perhaps included or adjusted with clip or clips duration change.
I really was looking at ways of creating a sequence with a variety of animations that I could re used for other project with the "Copy" then "Paste Attributes" in the hope it would be quicker than going back to the "Contor Effect" function all the time. I remember using (MS Movie Maker) and it had a few icons for this purpose that one would apply for a clip. It was rigid but quite effective. This way even if I needed to adjust the key frames, they would already be in place. (I already use this technic with similar pics, I copy one animation I like and "paste attributes to a bunch of pics, sometimes reverse the key frames, "copy" then select alternate pics from the previous selection and paste the new attributes to them... May be not everyone's taste!
So if I could import such a sequence in my Projects and place it on Video 2 with each pic. labelled with its appropriate animation and obviously key-framed accordingly. (I would have created a photo folder and renamed each of its photos with one of the desired labels, ie Pan down, Pan left, Zoom in, Rotate %, etc) - But I thought I hit a snag with the duration....
I have actually gave this a quick try and it seems to have some value. I just found out that it's worthwhile to get the shortest but meaningful labeling for this "templates" in order to identify them easily in their smallest view (time line zoomed out) ie Pan Left = PL, PR, PU, Zi, Zo etc.

How to not have songs duplicates in app remote? I have playlists for my iphone and playlists for my pc. All songs of my iphone are also on my mac. When i use the remote app, it plays everything in double.

Dear all,
I am using itunes to control all my music and i like to use my iphone, or my ipad to control my music with the remote app.
But i have a problem: all the music i have in my iphone count as double play.
To explain everything since the beginning, i personally don't like and don't trust at all the music sync capability of itunes.
So i have my music on my pc, and i load every type of music as a single playlist (ex a Pop-Rock folder, with all artists folders and so on, makes me a Pop-Rock playlist).
For my iphone, i created a iphone music folder, with the same classification.
It means that i don't have all my Pop-Rock music, only a selection. But of course the selected music appears also in my complete music collection.
So in itunes i created a folder playlist named iphone music, with inside one playlist by type of music (exemple : Pop-Rock, which contains some files of my main Pop-Rock collection).
So i do have duplicates in my hard drive. But when i selected the playlists to be shared on home sharing in itunes, i selected only the main playlists, not my iphone playlists! But still, when i look for ACDC artist for example, i should see only what i have on my pc, not what i have also on my iphone.
The result is if i play an album for example Back In Black (i have it full on my hard drive, and full on my iphone too), then every song is displayed in remote app in double, and also played in double:
Here is how it is displayed:
Song 1
Song 1
Song 2
Song 2
So the remote app plays Song 1 one time, then Song 1 (the second Song 1) one time and continues like this to Song 2 etc...
I guess that if i put my selection of songs on my ipad, i will then have everything in triple....
It is very annoying. Is there a way for me to change that? Or for an update to be made (based on ID3 Tag) to not play everything twice or more? It would have an ID3 Tag No Double toggle button.
I don't want to select from my main music to send elements to my iphone as doing that i lost a lot of music multiple times. This way of doing is not safe at all (at least for me).
What is possible to do? Is there room for improvement here (i believe so). Is there a way for me to avoir this very annoying effect?
I would really like to put my music to my iPad2 also, but after i'll have triple play....
Thank you for your help.

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

IPhone 4 w/iOS 5 stuck on "waiting for changes to be applied" any solutions?

So far I'm loving iOS 5 on my iPhone 4. Most everything is working great except for the fact that when I sync my phone it gets stuck on the final part of the sync (which was never part of the sync steps in the past) "waiting for changes to be applied." It happens anytime I make the iPhone sync: Transferring purchases, backing up, or making new changes like adding songs or apps.
So far I've just cancelled out of it and it's usually put everything I had synced onto it. But why does it get stuck on this? Has anyone else noticed this on their iOS devices?

I had the same problem. I updated yesterday, and ended up leaving the phone plugged in overnight, only to wake up in the morning and find it still "waiting for changes to be applied." One website suggested doing this inside the phone:
(Settings>General>iTunes Wi-Fi Sync), and CANCEL/TURN OFF the sync.
I found that for the first sync, or reboot of your iPhone after the iOS 5 and iTunes 5 updates, it's better to do that straight through USB and not over WiFi at all.
I was trying to do it that way, BUT even though I did indicate that on iTunes, the phone was still set to sync over WiFi until I disabled it as described above. My thought is that it was trying to do both, or something like that and could get past it. I hope this helps some of you. After you've done that, it would make sense to sync again straight through USB. Now, my sync takes a minute or two.

Iphone 4s not syncing to iTunes *waiting for changes to be applied*

I have a brand new iphone 4s that wouldnt sync with my pc desktop and i recently got a new mbp and the same thing is happening an error keeps popping up in Itunes after the 2nd step of syncing and it says waiting for changes to be applied. Its really frustrating i restored my phone and it did nothing for the syncing just deleted all my apps...and ive researched these problem before and its obvioius a big occurance with other users and apple has done nothing?!?! wth !! and i have no voice memos on my phone so there is nothing to delete for those that have solved their issue that way....So if someone has a solution to help me sync my iphone 4s to my mbp i would greatly appreciate since obviously apple does not care to fix this issue!!!! terrible..

also tried to wifi sync and nothing ...

When syncing after recent update, sync is stuck at "Step 4 of 4" "Waiting for changes to be applied" and will not complete, even after hours. How can this be fixed?

I completed the most recent software update for both iTunes and iPhone recently. I am now trying to sync my iPhone to add newly purchased audiobooks and the sync remains stuck at "Step 4 of 4" with the message "Waiting for changes to be applied" I have tried everything to correct this. When sync is cancelled a failure to sync message is generated. Any ideas????

Alright, so I reset my computer and suddenly it then recovered. Other times it wouldn't recover after resetting the computer, so I have no idea how it happened. I just restarted the computer lots of time and finally it worked.
Okay, back to square one. Now to transfer music, I tried my previous acknowledgable solutions but they didn't work. The iPod touch does not feature a hard-disk mode, and windows media player doesn't support iPods.
I've tried multiple programs to transfer music but none of them work properly and keep giving me error codes. So my iPod still gets stuck at Step 4: Waiting for changes to be applied or whatever it said.
Thanks in advance ._. (Please help)
p.s - Apple is useless. If I don't get steady answers tomorrow I'm going to end up calling them and get this problem fixed first hand. Second hand? I don't know, over the **** phone.
juiceb0xk signing out for the night. Bye. >:(

Itunes sync stuck on waiting for changes to be applied

I recently updated itunes to version 12.0.1.26. I have an Iphone 5 - with ios 8.1.1.
When I tried to sync my iphone to itunes, it constantly gets stuck on "step 6 of 6 - waiting for changes to be applied"
The only songs I now have access to on my iphone are songs I have downloaded through itunes - none of the music I previously had on my phone from CDs or other sources. It also made my videos unaccessable.
I am really frustrated as I have spent hours trying to fix this. Every time I update my itunes I have a different problem. I have read many other questions with the same issue over the years - but there never seems to be an answer or solution.
Thanks in advance for help!

I really don't appreciate the fact that no one from Apple seems to be dealing with the many, many threads that have started on this topic since iOS 7 came out. In any event, I seem to have solved my problem with a full software restoration -- that is, iOS software restoration.
I clicked on "Restore iPhone..." which does a complete reinstall of the iOS but also all apps, photos, songs, etc. Took about 45 minutes, but seems to have worked.
I had previously tried reverting to a backup of my iPhone, but that did not solve the problem. Only a full restore solved it.

Solution for waiting for changes to be applied for iphone

Similar Messages

Maybe you are looking for