Solution for Yosemite 10.10.1 wifi that worked for me

I created a new location in System Preferences > Network and deleted the old one.
To explain this exactly:
System Preferences > Network > Location > Edit Locations... > [gear icon] > Rename Location > [I just called it 'corrupt'] > + (the plus icon for creating a new location) > [I called it 'Automatic' to replace what was there] > - (the minus icon to delete a location) > [delete 'corrupt' location I just created]. Then add your networks back in via the wifi icon menu bar in the top right.

Hi @ Smaak ,
I see that you are having issues printing after updating to 10.10.3. I would be happy to help you.
I have provided some steps to try to see if we can resolve this issue.
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer.
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
Let me know how you make out and if you would like some steps for setting up the printer over the wireless network.
Feel free to click the Thumbs up button below if this helps. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

Thinkpad yoga - limited connection - intel 7260AC (with solution that worked for me)

limited connection issue
i'm new to the forum, sorry for bad english
i've a brand new rhinkpad yoga, with win 8.1 and intel ac 7260 wifi card
first of all the solution that worked for me is moving from WEP to WPA2 protection with the router
the problem was that i wasn't able to connect to internet using wifi
i got "limited connection" and i wasn't able to access internet at all
windows validated the connection and obtained an ip, but it wasn't then unable to access internet at all, i also wasn't able to access or ping the router.
i also got an error stating the lack of the default gateway, but this one seems to be resolved by windows check and repair procedures
my router had wep protection, and i used it with no issues with 2 android smartphones, an android tablet, a mac and a linux system, and in the past with windows 7 and vista systems.
i've searched for solution all the night and checked everything
- system and driver update (via usb thetering)
- various command to reset network configuration
- unchecking selected check box in energy saving tab inside wireless property panel
but the only one solution that worked was the move from WEP to WPA2
hope this helps
my first post, be patient...

From what I gathered, about the Y2P Limited Wifi issue, this problem is solved by configurating a router to meet the computer needs. Once done, to fully implement this fix, it is adviced that you carry this configured router and use it every where you go, like a power cord. When you go to Statbuck in the monrining, be sure they hook up your router and return it when you leave. Alternitively, this can be done at other venues like the airport, hotel, school, work, etc.
I really don't know why people keep wasteing their time. Lenovo has chimed in and said this is a router issue. That said, the aformentioned advice is a formulated fix. Shall we put an end to thiese topics and get the forum moving again past the wifi issues? Like said many times, this issue has been fixed using the above reccomendation.

IPod classic error 50, 53, 69, etc solution that worked for me

Giving back to the community that I spent so long searching in for a solution to this problem--even though I ended up with my own solution that may or may not work for you.
I bought a 6th gen 160GB iPod classic and tried to sync it to my massive 14,000(+)-song library. The sucker would give me all sorts of errors (50, 53, 69) and never complete my sync. It said my files were corrupted or that an unknown error occurred yada yada. I looked on the forums for a solution and none of them worked. I sent that iPod back and got a 7th gen 160GB instead. SAME ISSUE. MY GOD. My only guess was that since both iPods came from a Mac computer there was some issue with it connecting to Windows--ever after reformatting it.
So, I knew about formatting my iPod and then restoring it to try and resolve the issue that turingtest2 often would point out in many threads similar to this: iPod Classic
What I never did was a full format. But more specifically, I never did a full format and waited for it to finish.
The fix that worked for me was this (and I'm giving my exact order, even if the steps were unnecessary--as the fact that it worked was like a dream come true):
1) Go to My Computer, right click on Computer in the sidebar and click on Manage.
2) After the window pops up, click on Device Manager and then Universal Serial Bus Controllers.
3) Make sure your iPod is plugged in, and right click Apple Mobile Device USB Driver and uninstall it.
4) Now go to Disk Management in the sidebar. Right click on the iPod and select Format
5) For format options, select file system as NTFS (I know, I know--but it worked for me), and UNCHECK Quick Format.
6) Format it, and WAIT for it to finish. It will take a really long time.
7) After formatting, plug the iPod back in and wait for the driver to install. Open iTunes and restore the iPod.
8) Wait for the iPod to restore and then sync the music!
If everything was done correctly it should work, possibly.
My hard drive specs before this were:
Retracts: 34
Reallocs: 9344
Pending Sectors: 0
So, the specs were pretty bad, but it still worked for me.
I actually just got done doing another sync and it still seems to be working fine.
Good luck!

I have had success with this method also, but it is not full-proof. Try the movie "The Incredibles". The audio will be about 10-seconds out-of-sync. (BTW, I own this movie).

KT6 Delta Rebooting Issues - Solution that Worked for me

Hi
Solution that worked for me: Enabled SATA Controller which takes a while for it to detect SATA Drive and giving time for the system to warm up. I don't get that annoying message asking to restart Windows in safe mode, normal, & etc.
I've been having this rebooting problem lately. I tried everything from BIOS settings, checking drivers for problems, checking Windows XP, Power Supply, Checking Motherboard,and etc. I installed a fresh copy of Windows but still had that rebooting problem. When I got this MB 3 months ago, it was working perfectly and had no rebooting problmes. But its now fall in my place and the temp a bit cold.
I read about the temperature issue (20C). I disbaled the SATA controller because i don't have a SATA Drive.
Hope this will help others as well and for MSI to Fix the Problem.
Barton 2500+
Ati Radeon 9000 Pro
Maxtor DiamondPlus9 80 gig
Western Digital WBC 120 gig
LiteON 52x24x52
360W PS

No, i`m sure that trick it`s not working for me and for rest of us.
I did try all trick in the bios, and...

Airtunes audio drop out solution that worked for me! :)

setup is DSL modem, AEBS main base station (software v5.6), AE (software v6.2), AE is in WDS mode as a remote base station. I am running OSX 10.4.3, and all software (itunes, etc) is updated current as of 6Nov2005.
using airport admin utility, i set both base stations to "g only" and still had audio drop outs. Then I left both of them on g only and set both of them on channel 5, (was on channel 10 before.) no airtunes drop outs!!
I have been audio drop-out free for a few days now and am cautiously optimistic- enough to post my solution. hope it works for you, too!

Thanks Bryan! Glad to hear you found a solution that works for you. Your suggestions are also among the many solutions previously posted in the mother of all discussions on this topic found at:
Muhannad Al-Khurafi, "Audio Drop while using airtunes", 10:38pm Jul 21, 2004 CDT

Solution that worked for iPad connection to "n" nework!

So, reading of the many wireless issues with the iPad, specifically connecting to, and maintaining a stable connection to an 802.11'n" network, I decided to do some research. Many solutions here, suggest altering the radio mode to "g" only, as this is what the Ipad seems consistently able to "talk" to.
After applying the steps below, my iPad now has a completely stable connection to my "n" network. I should mention that I have a dual-band network setup at home, one (b/g) via an older "domed" Airport Extreme Base Station; the other is via an original Time Capsule (circa 2008), which was set to an "802.11n only 5GHz" mode. Using Airport Utility, I could see that in the Wireless tab, the TC "channel" option, was set to "automatic." NOTE: this is BEFORE my modification that solved the issue.
After reading up on the subject, I learned that the5GHz range of a router can be significantly shorter compared to 2.4GHz; one can move a short distance away from the 5GHz router and your connection will dwindle or drop all together, whereas with a "g" radio mode, in the 2.4GHz mode, the distance allowed, seems far greater. Now, with the channel option of the TC set to "automatic",(under the "wireless" option in Airport Utility setup), it is quite possible that the device is selecting a lower channel, when none is specified. The lower the channel, the lower thepercentage of the transmission rate, which in turn drastically reduces the signal strength, leading to the endless loop of dropped connections, or even worse, the "n" network being invisible to the iPad altogether.
Here is what I did to produce a totally excellent connection to an 802.11n network, using an Apple Time Capsule (TC). The secret is in forcing the base station to operate ONLY on a higher channel!
1) Using Airport Utility, use the "manual setup" option to reconfigure the TC. Select the "Airport", then "Wireless" tab.
2) Select the "Radio Mode" to _802.11n only 5GHz_
3) Important step! Look at the "Channel" tab - if it is set to "Automatic", this is what needs to change! In the original TC, you will need to hold down the Option key to see the other available channel selections:
I selected 153, but anything over 149 (including), should produce the desired results. Remember, in the 5GHz range, the higher channel will produce a higher transmission rate.
4)Still in the Wireless tab, click "wireless options". Make sure that "Use wide channels" is checked.
5) After the above steps are completed, update your Time Capsule.
6) Now go to your iPad, open your Settings/Wi-Fi.
Select your "n" Nework, >configure> select to "Forget this Network".
Now connect to your "n" network again, you will be prompted for your password, enter it and voila! you should have stable connection "n", without having to resort to the "g" only regression!
Just for your info, my wireless encryption is set to WPA2 Personal.
I really hope this works for others as well as it has worked for me. This setup was done over 4 hours ago, and I have experienced consistently excellent range/signal all over my house (4,800 sq ft), through closed doors, on different floors, even the garage!
Message was edited by: Lauren R
Message was edited by: Lauren R

Thanks for the suggestion. I followed them to the letter. I have a time capsule and a base station. I switched the time capsule as you suggested. I got rid of the previous connection on the ipad and connected. At first when it started I had full bars. I walked to the opposite side of the house (2000 sq. ft house) was going strong and it dropped to one bar. If I turn the ipad off for awhile full strength comes back. Unfortunately, in my experience no joy.

Is there a documented solution for the FlashPlayer Metafile Download error that works?

Many people are experiencing problems when downloading the new FlashPlayer version 10.3.183.5 from the Adobe website. During the download process a "Metafile Download Error" occurs when performed from an office or client facing facility. This issue is not isolated to Win7, but is also an issue with Win XP and/or Vista. Is there a documented solution for the FlashPlayer Metafile Download error that works?

Use the download links in this post when that error occurs: http://forums.adobe.com/thread/889580

Looking for an iPad(iPad/Mac) app that allows for playlists to migrate to iPad

I am specifially and exclusively looking for recommendations for an iPad(iPad/Mac) app that allows for my playlists to be migrated to iPad intact and playable.
iTunes -> Podcast/Music/Videos does not support mixed (music/video/podcast) playlits or video playlist at all. The app(s) should be able to easily create these playlist on the Mac (and manage content) much like iTunes (10).
On the phone with tech support today and they agree this is missing functionality from Apple. They suggested I reach out on to other users that may have a thrid party solution.

Requires each device/user have an unique Apple ID(verifiable email address):
http://itunes.apple.com/us/app/find-my-friends/id466122094?mt=8
Otherwise you can use Find My Phone, but requires logging in for each separate user. Find My Friends(built by Apple) will show everyone's location on one device.

IWeb CPU usage, fix that worked for me

On my MacBook Pro having iWeb open and idling with my relatively simple site would cause my CPU usage to hover between 35% and 50%. Pretty disconcerting since I have a 2.66 i7 model and 8 gigs of RAM. Some pages on my blog have a decent amount of text and pictures and typing became a one letter at a time event since the program would just drag. Very annoying.
I did a lot of searching and finally found something today that worked for my situation. Since it took a bunch of time to locate a solution I figured I'd share it.
My problem ended up being a font issue. I opened up Font Book and saw several errors with duplicate fonts. Since there were a few I just did a select all and then selected resolve duplicates from the menu. To be safe I rebooted but that may not have been necessary.
Now iWeb idles between 5% and 10% which is much more reasonable. Not to mention now I can work on my site and have my battery last longer than an hour and a half!
Anyway, I hope this helps someone.

If doing so improved the situation, this confirms that one of Safari's database files has become corrupt and is causing the crashing, and this shows up in your crash log as Thread 3 having crashed.
The blacklists from Google’s Safe Browsing Initiative (where Safari checks for 'fraudulent websites') are contained in a database cache file called SafeBrowsing.db - the file was created when you first launched Safari 3.2, and if you have the browser open, the file is modified approximately every 30 minutes.
As an alternative to turning off 'Warn when visiting a fraudulent website', which will lose you that important security feature, you should delete that database file, (but first close Safari):
Home/Library/Caches/com.apple.Safari (this is a folder)/SafeBrowsing.db
It will be recreated next time you open Safari, and will then start again collecting details of dodgy websites.
If you are interested:
How the Anti-Phishing feature of Safari 3.2 works:
http://www.macworld.com/article/137094/2008/11/safarisafebrowsing.html

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works. I can CREATE the list but, the songs that I have played don't accumulate in the list. I haven't changed the steps that worked for me previous to the upgrade. I have no idea

Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.
I can CREATE the list but, the songs that I have played don't accumulate in the list.
I haven't changed the steps that worked for me previous to the upgrade.
I have no idea how to fix this and can't find mention of anyone else having a similar problem.
Any suggestions?

Click on a station and drag to the left. The playlists sidebar will open up. Drop on the playlist you want to add to.
tt2

Is there anyone here that works for itunes support?

is there anyone here that works for itunes support?
I have waited for 39 hours for a response from support team with no reply. I can get any of my credit cards to be accepted with itunes. Somthing is wrong on apples side of things..been to apple store and they could not help either. this is crappy. I am one of the biggest apple fans but this is one side of apple that really *****. CAN'T TALK TO A LIVE HUMAN FROM ITUNES? Give me a break.

I agree completely endive! I've been fighting for days trying to get some help with a technical problem and apparently, you can't get help from Apple without paying out the nose. The problem I'm having is due to an update they recommended which I installed and now have no sound in itunes!
I too love Apple products. I hate, hate, hate, hate, hate, their customer service after the sale! The are just as bad as Microsoft.

HT2589 My account is blocked out. I registered my account for Russia because there was no that option for Ukraine. And now I can't do any purchasing, because apple store want's another payment option. What should I do? Ps my friends here has such a proble

My account is blocked out. I registered my account for Russia because there was no that option for Ukraine. And now I can't do any purchasing, because apple store want's another payment option. What should I do? I have many apps on my account but I can't do even updating. Ps my friends here has such a problem too

Ukraine is there. It's been there for a while. I even see it now.

IOS 6 Wi-Fi fix that worked for me.

I just downloaded IOS 6 and my Wi-fi was not working correctly, everytime I tried to connect to Wi-Fi it took my to an apple page and never loaded wi-fi up. Here's what I did to fix it. Click on settings>Wi-Fi>Click blue arrow next to network trying to connect too>change auto-connect to on>scroll down and change HTTP Proxy to Auto.
That worked for me to connect to Wi-Fi. Hope this helps everyone, I know there's a lot of frustration out there

What iPad update through itunes are you referring to please? I just synched and it says 3.2 is the latest update software for the ipad.
Thanks
JW

HT1923 This article contains the only thing that worked for me. I also had to sign out of iCloud and uninstall it. Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, and Users.

This article contains the only thing that worked for me. I also had to sign out of iCloud and uninstall it. Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, Program Data and Users. My iPhone 4 will now sync with iTunes both in its USB-connected mini dock and over Wi-Fi. It's unfortunate (negligent programming on the part of Apple?) that the upgrade to iTunes 11 did not remove all of those files as part of the upgrade process.

I am having the same issue....Same address for years - same as USPS - I tried 5 times (3 macs and 2 iPhones) and now i have 5 CHARGES for 1.00 each on my credit card. I took the credit card info off so they don't charge me anymore. How can they charge me yet still not allow me to download free updates and say I have an invalid address? I'm sure I will spend weeks or months trying to get a credit out of these incompetent idiots.

Solution for Yosemite 10.10.1 wifi that worked for me

Similar Messages

Maybe you are looking for