Solution:  How to find the phone signal in fringe areas

This is not so much a question but a solution I accidentally found.
If you are in a weak signal area and the phone is stuck on "searching" or says "no signal" and you need to get it to find that phone signal all you need to do is push the phone shut off button on the top of the phone by holding it down until the shut down screen appears, but don't move the slider to shut down the phone.
Next, wait a few seconds and the phone signal will show up. In really fringy areas you may need to try twice.
There is no question that this phone is much more able to get weak signals than my 3GS.

Hi, thanks for the information, but i have figured out the following additional settings that are required to be made :
1)  from upper menu, select the "Environment" to :- Business blueprint
2) then select any folder on the left-hand-side
3) Now, click on 'Structure' tab
....and now, follow the steps as answered by you.
Also, after you have opened up the "History" dialog box  ..... click on the "show scope info' ...... it will give you the entire change log.
Thanks,
PS : step no. 1) is very important.

Similar Messages

  • How to find the list of patches which are applicable to DS 5.2

    Hi;
    Is there any web page which lists the list of the patches which are released for Directory Server 5.2.
    I appreciate your assistance

    Read:
    http://docs.sun.com/source/817-7611/index.html#wp33336
    And also all the release notes.
    � SUN ONE Directory Server 5.2 release notes:
    http://docs.sun.com/source/816-6703-10/index.html
    � SUN Java System Directory Server 5.2 / 2005Q1 release notes:
    http://docs.sun.com/source/817-7611/index.html
    � SUN Java System/Directory Server 5.2 / 2005Q4 release notes
    http://docs.sun.com/source/819-2405/index.html
    � SUN Java System/Directory Server 5.2 / 2005Q1 release notes for Compressed Archive
    http://docs.sun.com/source/819-1815/index.html
    � SUN Java System/Directory Server 5.2 / 2005Q4 release notes for Patchzip
    http://docs.sun.com/source/819-4290/index.html
    You may find the following script useful.
    #! /bin/sh
    # chk_patches_sjes_ds52.sh
    # Gary Tay, 1-Apr-2005 written
    # Pls customize the patches you are checking, use blank to separate
    # multiple patch ids, eg: 5.9:112345 113456
    # Pls refer to:
    # http://docs.sun.com/source/817-7611/index.html#wp33336
    #114677-08 SunOS 5.9: International Components for Unicode Patch
    #117724-10 SunOS 5.8: NSPR 4.5.1 / NSS 3.9.5 / JSS 4.0
    #115342-01 SunOS 5.9: Simple Authentication and Security Layer (2.01)
    #115610-18 SunOS 5.9_sparc: Administration Server 5.2 patch
    #115614-20 SunOS 5.9: Directory Server 5.2 patch
    #117015-16 Patch for localized Solaris packages
    #116837-02 LDAP CSDK - SUNWldk, SUNWldkx
    # Solaris 8: (DS 5.2 Patch3 for the package version)
    #115610 SunOS 5.9 : Sun Java(TM) System Directory Server 5.2 patch 3 (Adminserv)
    #115614 SunOS 5.9 : Sun Java(TM) System Directory Server 5.2 patch 3 (DS)
    #117722 SunOS 5.8: NSPR 4.5.1 / NSS 3.9.5 / JSS 4.0...
    #118615 LDAP Java Development Kit 4.17 SunOS 5.8 5.9 _x86: genesis patch
    # Solaris 8: LDAP-Client
    #108993 LDAP-Client for Solaris 8 (phase II)
    #108808 LDAP-Client for Solaris 8 (man-pages)
    # And at your choice for for JES 114045
    cat >/tmp/chk_patches$$.tmp <<EOF
    5.8:108993 115610 115614 117722 118615 108808 114045
    5.9:114677 117724 115342 115610 115614 117015 116837
    EOF
    SOLARIS_VER=`uname -r`
    PATCH_IDS=`grep "$SOLARIS_VER" /tmp/chk_patches$$.tmp | cut -d: -f2`
    for i in `echo $PATCH_IDS`
    do
    RESULT=`showrev -p | grep "^Patch: $i-"`
    [ -n "$RESULT" ] && echo $RESULT
    [ -z "$RESULT" ] && echo PATCH $i not found...
    done
    /bin/rm -f /tmp/chk_patches$$.tmp
    Example of running chk_patches_sjes_ds52.sh:
    # ./chk_patches_sjes_ds52.sh
    Patch: 114677-08 Obsoletes: Requires: Incompatibles: Packages: SUNWicu, SUNWicux
    Patch: 117724-10 Obsoletes: 115926-10 Requires: Incompatibles: Packages: SUNWtls, SUNWtlsx, SUNWpr, SUNWjss, SUNWprx
    Patch: 115342-01 Obsoletes: Requires: Incompatibles: Packages: SUNWsasl, SUNWsaslx
    Patch: 115610-17 Obsoletes: Requires: Incompatibles: Packages: SUNWasvc, SUNWasvu, SUNWasvr, SUNWasvcp
    Patch: 115614-19 Obsoletes: 117907-02 Requires: 115610-17 Incompatibles: Packages: SUNWdsvr, SUNWdsvcp, SUNWdsvh, SUNWdsvhx, SUNWdsvu, SUNWdsvx, SUNWdsvpl
    PATCH 117015 not found...
    Patch: 116837-02 Obsoletes: Requires: Incompatibles: Packages: SUNWldk
    Gary

  • How to find the Source system table

    Hi Experts,
    How to find table name in SCM APO system, because I am getting error in process chain, the corresponding  table in the source system does contain any data. check the data basis in the source system.
    Please provide the solutions how to find the table in APO (DP scm bi).
    Thanks in advance.
    Bye,
    Bharathi.

    Hi
    I guess you knew that in APO, apart from APO tables.. it is Livecache where the actual transaction data is stored. 
    But, if you just want to find some of the existing table in APO.. simply go to se11 and in the table name put the pattern as /SAPAPO/* and press F4. It will give a list of tables with the descriptions. 
    You can find out yourself all APO tables application wise with the following steps:
    Use transaction SE11 or SE16
    - Press F4 in the selection field 
    - You will get popup... in the below line of the popup selection SAP Applications.
    Here you will get the Application list.  In that select your own application for which you want to get the table details
    e.g. SCM- Supply Chain Management --> SCM-APO --> Advanced Planning and Optimization --->SCM-APO-MD - Master Data --> /SAPAPO/00_PRODUCT 
    Here are some examples:
    /SAPAPO/v_matloc - material, material number location view
    /SAPAPO/TSAREAKO - Planning Area details
    /SAPAPO/TSAREATE - Planning Area technial fields
    Since there are thousands of tables, I cannot list them all here. 
    or
    You can use transaction ST05 (database trace) to help you find the tables you are looking for. You can turn on the trace function, run an APO transaction, and looks at the ST05 logs for the tables

  • How to find the Workbook statistics.

    Hi Experts,
    Can anyone please tell me how to find the Workbook statistics.
    There are more 20 workbooks created from a single query. I want to find out the top 3 workbooks accessed frequently for 1 year.
    Please provide your valuable inputs.
    Thanks

    Hi,
    if statistics cubes are installed and getting loaded every day you can check following reports
    0BWTC_C08_Q105
    Business Content workbooks
    0BWTC_C08_Q103
    Business Content DataSources
    0BWTC_C08_Q101
    Business Content InfoCubes
    0BWTC_C08_Q100
    Business Content InfoObjects
    0BWTC_C08_Q107
    Business Content InfoSet queries
    0BWTC_C08_Q106
    Business Content InfoSets
    0BWTC_C08_Q102
    Business Content InfoSources
    0BWTC_C08_Q104
    Business Content ODS
    0BWTC_C08_Q108
    Business Content Queries
    0BWTC_C10_Q014
    Query Runtime
    0BWTC_C10_Q251
    Deleting Data in InfoCubes
    0BWTC_C10_Q253
    Deleting Data in InfoCubes - Detail, Times
    0BWTC_C10_Q254
    Deleting Data in InfoCubes - Details, Records
    0BWTC_C10_Q252
    Deleting Data in InfoCubes - Overview
    0BWTC_C10_Q507
    Average Time per Query
    0BWTC_C10_Q021
    Average Time per Query
    Thanks and regards
    Kiran

  • How to find the reports/Txs that are affected by changes made in NA30

    Hi All,
    Does anyone know how to find the reports and transactions that are affected by ISH Billing (Interim Billing /Final billing) in hte Tx NA30. I need to modify the some functiionality of Interim billing at NA30 and still maintain the consitenecy of NA30.
    Many thanks & Regards,
    Vijaya

    No idea about any such report but from SAP help got following list of billing reports. It might be helpful
    RNAABGR0 IS-H: Revenue Accrual
    RNAABRKZ IS-H: Change Billing Indicator of a Case
    RNABD000  IS-H: Patient Billing
    RNABILB0   IS-H: Change Billing Block via Conditions
    RNABILB1   IS-H: Change Billing Block via Conditions (Outpatient Cases)
    RNADIN03   IS-H: Billing Document Mass Print Program
    RNAFSPER  IS-H: Change Billing Block
    RNANFAL0 IS-H: Set Cases Without Billable Services to "Final Billed"
    RNANFAL1 IS-H: Set Outpatient Cases Without Services to "Final Billed"
    RNANFAL2 IS-H: Set Fully Billed Cases to "Final Billed"
    RNASED00 IS-H: Delete Case Selections
    RNASEK00 IS-H: Copy Case Selection
    RNASELM0 IS-H: Billing - Process Messages
    RNASEL00 IS-H: Case Selection
    RNASEL01 IS-H: Case Selection via Outpatient Visits
    RNASTO01 IS-H: Cancel Billing Documents for Case [Live Mode]
    RNASTO02 IS-H: Cancel Billing Documents for Case: Mass Partial Cancellation [Live Mode]
    RNASTO03 IS-H: Cancel Invoice Items per Case (Partial Cancellation) [Live Mode]
    RNASTO04 IS-H: Cancel Provisional Invoice
    RNAPRV04 IS-H: Cost Reimbursement u2013 Direct Patient Billing
    RNAENT00 IS-H: Billing Status of Inpatient Cases
    RNA_CASCADE_BILLING IS-H: Cascade Bill Processing

  • How do I find the phone # associated with my dryloop account?

    Customer service said they would be open til midnight but they're closed at 11:20. How do I find the phone # associated with my dryloop account so that I can pay online.

        Hi, yogaonmain!
    I'm sorry we were not available to get that information to you. Your mobile telephone number will be listed on your paper statement. It is also typically listed inside your phone under the Settings/Phone info section.
    If you need this information immediately, please call our customer service line at 800-922-0204.
    Thank you,
    AdamE_VZW
    Follow us on Twitter @VZWSupport

  • I lost my iPhone, but it's been more than 24 hours so iCloud won't let me see the last known location of the device, and i need the map of it's last know location to find the phone, how do i get the map of it's last known location?

    I lost my iPhone, but it's been more than 24 hours so iCloud won't let me see the last known location of the device, and i need the map of it's last know location to find the phone, how do i get the map of it's last known location?

    It's not likely to re-connect to a network lying on the ground somewhere and getting rained on, it would be really great if I could see that map again so I could use it's last known location to find it.  Kind of pointless to have a 24 hr killswitch deadline.  If I had known I would have taken a screen-shot while I still had access to the information.  Since I lost the phone at Canada's Wonderland (which is now closed for the season) I don't have access to the location where I lost the phone (under a roller-coaster probably), and so I wanted to send the Lost And Found people a screen-shot of it's last known location, but I guess I can't do that now.  (Apple are big jerks)

  • How do you find the phone's mac address for Droid RAZR Maxx HD?

    how do you find the phone's mac address for Droid RAZR Maxx HD?

    Ann154 wrote:
    WalrusM wrote:
    how do you find the phone's mac address for Droid RAZR Maxx HD?
    It is listed under the advanced options for the WiFi settings or About Phone > Status within the phone's settings
    Motorolas list them under About Phone > Status.
    Edit:  Oh, snap!  It is listed in both places.     Nevermind!  Please excuse! 

  • HT1529 How do I find the phone number for my iPad 2 ? Says unknown :/

    Where can I find the phone number for my ipad2???

    You aren't running Mac OS X 10.3 if you have an iPad.  The oldest Mac OS X that will connect to an iPad from a Mac is Mac OS X 10.5.   The solution should be here.

  • How do I find the phone number to cancel?

    How do I find the phone number to cancel this thing? I was told I could also cancel by going to the subscription manager but I can't find that either.

    I would very much appreciate it as I've found no other way to do it as the website links just take us in circles and we can't find any other info as to contacts. Since the program does not work with our very old word version as far as I can tell, and we can't afford to update that, it really doesn't help us. We are a small animal rescue with limited resources so also can't afford to waste money on something that does not do us any good, so we were hoping to cancel fast enough to get our payment refunded as it states in the terms of agreement, within 30 days. If you could fix this we would be very grateful.

  • HT3939 how to find the owner of the phone number

    how to find the owner of the phone number
    <Phone Number Edited by Host>

    Look it up on Google. It may or may not work.

  • How to find the number of data items in a file written with ArryToFile function?

    I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
    If you are young work to Learn, not to earn.
    Solved!
    Go to Solution.

    What about:
    OpenFile ( your file );
    cnt = 0;
    while ((br = ReadLine ( ... )) != -2) {
    if (br == -1) {
    // I/O error: handle it!
    break;
    cnt++;
    CloseFile ( ... );
    There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
    After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • How to find the number of times method being called.....

    hi,
    can any one pls tell me how to find the number of times the method being called......herez the example....
    Refrence ref = new Refrence();
    for(int i = 0;i < arr.length; i++){
    if(somecondition){
    ref.getMethod();
    here i want to know how many times the getMethod() is calling...Is there any method to do this.. i have seen StrackTraceElement class..but not sure about that....pls tell me the solution....

    can any one pls tell me how to find the number of times the method being called......
    herez the example.... http://www.catb.org/~esr/faqs/smart-questions.html#writewell
    How To Ask Questions The Smart Way
    Eric Steven Raymond
    Rick Moen
    Write in clear, grammatical, correctly-spelled language
    We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
    So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
    Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
    More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

  • How to find the number of fetched lines from select statement

    Hi Experts,
    Can you tell me how to find the number of fetched lines from select statements..
    and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
    Thanks in advance
    santosh

    Hi,
    Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
    For ex:
    data: itab type mara occurs 0 with header line.
    Select * from mara into table itab.
    Write: Sy-tabix.
    This will give you the number of entries that has been selected.
    I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
    Hope this helps,
    Sudhi
    Message was edited by:
            Sudhindra Chandrashekar

  • How to Find the number of Databases in a server.

    HI,
    Please tell me how to find the number of Databases are in a server . when the DB is not up.
    ps -ef | grep ora_
    This i know whether our DB is up or not. But i want to know how many databases are in a server .If the database is down .
    Cheers,
    Gobi.

    Hi,
    [oracle@oralinux admin]$ lsnrctl status
    LSNRCTL for Linux: Version 9.2.0.4.0 - Production on 01-DEC-2006 16:25:41
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
    TNS-01169: The listener has not recognized the password
    [oracle@oralinux admin]$
    Plz give me the solution.
    Cheers ,
    Gobi.

Maybe you are looking for