[SOLUTION] How to recover a Yoga tablet 2 with Windows 8.1

Moderator comment: Thread rearranged slightly to allow KalvinKlein's post to be marked as a solution. Regards.

How to : Recover a Yoga tablet 2 version with Windows 8.1 Bing
In case of emergency, if you need this option , or other circumstances ... last hope ..
..works without keyboard ...
Yoga tab 2 as tablet itself ...equipped with three manual function buttons ,means not so many possible options left ...
Front Yoga Tablet 2 10" version with Windows 8.1
Shows micro HDMI and headphone out Yoga Tablet 2 10" version with Windows 8.1
Shows volume rockers and thumb on/off button
first step keep in mind that your batteryis near fully charged, otherwise plug-in
save your personal data on a cloud or microsdhc card. ..thats for save...
Ok...lets go.... push the volume rocker up hold them and press the round button on three seconds.
the yoga tab 2 will start up and show the lenovo logo...
a few seconds later this should be shown ...
novo menu
Normal Startup
BIOS Setup
Boot Menu
System Recovery
simply touch System Recovery
that will load the recovery envirement after the break ...
a few seconds later the yoga screen turns into blue colour
Choose an option
Continue (Exit and continue to Windows 8.1)
Use a device (Use a USB drive , network connection or Windows recovery DVD)
Troubleshoot (Refresh or reset your PC , or use advanced tools)
Turn off your PC
the right way to go is Troubleshoot ... so give a big five to Troubleshoot... (a soft touch please )
...next screen is Troubleshoot...with these options
Troubleshoot
Refresh your PC
If your PC isnt running well, you can refresh it without loosing your files
Reset your PC
If you want to remove all of your files you can reset your PC completely
Advanced options
touch Reset your PC
will show this on your Yoga tab 2 ....
Here´s what will happen
* All your personal files and applications will be removed
* Your PC settings will be restored to their defaults
touch Next , after another start or cancel option... the recovery envirement need around an hour to recover ...
tip toe tip toe ... walking around the block with your pet ... talk with your neighbour ... or something else ..
Bing, Bong : time is up and your yoga is complete factory restored , so you can startin your yoga tab 2 from a scratch that welcomes you with windows welcome screen, touch it to set up your personal data and so on..

Similar Messages

How to recover a Yoga tablet 2 with Windows 8.1

How to : Recover a Yoga tablet 2 version with Windows 8.1 Bing
In case of emergency, if you need this option , or other circumstances ... last hope ..
..works without keyboard ...
Yoga tab 2 as tablet itself ...equipped with three manual function buttons ,means not so many possible options left ...
Front Yoga Tablet 2 10" version with Windows 8.1
Shows micro HDMI and headphone out Yoga Tablet 2 10" version with Windows 8.1
Shows volume rockers and thumb on/off button
first step keep in mind that your batteryis near fully charged, otherwise plug-in
save your personal data on a cloud or microsdhc card. ..thats for save...
Ok...lets go.... push the volume rocker up hold them and press the round button on three seconds.
the yoga tab 2 will start up and show the lenovo logo...
a few seconds later this should be shown ...
novo menu
Normal Startup
BIOS Setup
Boot Menu
System Recovery
simply touch System Recovery
that will load the recovery envirement after the break ...
a few seconds later the yoga screen turns into blue colour
Choose an option
Continue (Exit and continue to Windows 8.1)
Use a device (Use a USB drive , network connection or Windows recovery DVD)
Troubleshoot (Refresh or reset your PC , or use advanced tools)
Turn off your PC
the right way to go is Troubleshoot ... so give a big five to Troubleshoot... (a soft touch please )
...next screen is Troubleshoot...with these options
Troubleshoot
Refresh your PC
If your PC isnt running well, you can refresh it without loosing your files
Reset your PC
If you want to remove all of your files you can reset your PC completely
Advanced options
touch Reset your PC
will show this on your Yoga tab 2 ....
Here´s what will happen
* All your personal files and applications will be removed
* Your PC settings will be restored to their defaults
touch Next , after another start or cancel option... the recovery envirement need around an hour to recover ...
tip toe tip toe ... walking around the block with your pet ... talk with your neighbour ... or something else ..
Bing, Bong : time is up and your yoga is complete factory restored , so you can startin your yoga tab 2 from a scratch that welcomes you with windows welcome screen, touch it to set up your personal data and so on..
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Excellent tip, K!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to Recover a Dark Picture with a Heavy Color Cast

I just posted this article about how to recover a dark picture with a heavy
color cast using Lab Color mode in Photoshop. I hope it will be helpful to
others.
http://www.braintrove.com/article/58
Greg Collins
Microsoft MVP
Visit Braintrove at http://www.braintrove.com

None taken. I am unfamiliar with ACR and would love to see (compare) what it
could do with the sample PNG file in the article, and how much time it took.
The results I achieved in the article took only a few minutes to
complete--though as I mention below, it took more than a few minutes to get
to the point where I could do it in a few minutes.
I happened across a web site one day discussing the techniques in Margulis'
LAB Color book, which interested me enough to purchase it. I found the book
very enlightening and have seen incredible results using the techniques he
describes as applied to my various images. I've also ready his Professional
Photoshop book which focuses more on CMYK, and found many techniques in
there just as enlightening.
Ultimately the tools and techniques used are irrelevant if you get the
results you want... but if you find one that works faster, easier or better,
then certainly you should employ it.
I have no problem working in RGB, CMYK or LAB and find benefits from each.
The particular sample image I used in the article was one that I've spent
(too much) time cleaning up in various ways and in various color spaces (or
combinations thereof). It became my "poster child" image to work on as I
continue to build my Photoshop skills. The approach I used in the article
was the one I found most to be the fasted with the most effective results.
The original was a 6MP JPG file. I reduced it to the size in the article and
then worked on that size for the remaineder of the article. The resutls are
equivelant in the fullsize file.
Greg Collins
Microsoft MVP
Visit Braintrove at http://www.braintrove.com

Ideapad Yoga 11 with Windows RT - Issues

Got my orange Yoga 11 with Windows RT a few days ago here in the UK, and I have to say that initial impressions are very good. No fan at all, barely gets wam, switches on from connected standby almost instantly, and battery life is really impressive. Build quality seems solid - no peeling paintwork, and keyboard is securely fastened, screen is great quality, there's some backlight bleed on the right side, but only visible when at 100% against a black background (i.e. never). There's a bit more flex and 'give' in the screen than I expected, but nothing I can't live with. Wifi signal is also strong and connections don't drop like others are seeing with the Yoga 13.
So, Windows RT ... still getting used to it, but here are some initial niggles: there only appears to be one Lenovo RT settings app available in the Store, and it's fairly useless, since all it does is provide a switch to lock/unlock keyboard in different orientations (why?). No Lenovo drivers are available from here either, I guess these all come from Windows Update for the RT model instead?
The problems I'm having stem from not being able to tweak some system & hardware settings properly because of the above and the need to rely on stock driiver configs, specifically:
- Keyboard: it can be quite sluggish, and doesn't register repeat letters very well (like in 'tell' or 'soon') at my typing speed. I've never experienced this with any keyboard, nevermind a Lenovo one. The stock keyboard config under Control Panel does nothing to help this - changing the two options for Repeat delay/Repeat rate just make it worse. This is quite annoying, as I really have to slow down my typing speed to get any work done. It would currently be my no. 1 reason for returning it, depending on how I get on with it this week.
- Touchpad: no options are available to configure it that I can find. No tweaking multi-touch, like 2-finger scroll direction (which is reversed from the normal setting). It can also be very sluggish to respond sometimes, especially for pinch to zoom and similar gestures.
- Bluetooth: allthough I can pair with e.g. Jamboxes fine enough, the connection is dreadful - constantly skipping and dropping out with any audio source, basically unusable. The Jamboxes work fine with every other device I own. Again no settings I can tweak here beyond the installation options, and no way to debug the problem.
Any help or advice with these niggles would be much appreciated, especially the keyboard issue.

Just to add a few more passing thoughts to this monlogue for anyone who may be thinking of buying this model instead of the 13.
When it comes to Windows RT I'm finding myself more surprised every day by what I *can* rather than *can't* do with it. Partly this is because I thought it would be something closer to a gimped Android or iOS experience. Here are some things I didn't really expect to be available or usable, and that compare very well to those other OSes:
- Remote Desktop (& RemoteApps): this really works very nicely, so far if I need quick access to a non-RT app it's a doddle to remote login to a W7 machine. I was expecting this to be too slow to be practical, but actually it's very smooth, and no need to install a separate app (although the Store has a Metro version to complement the desktop UI).
- Windows Firewall with Advanced Security: I was expecting something dumbed-down, but this is the fully monty, completely configurable when you need it, otherwise less in your face than with W7. The same goes for Windows Defender, also included as standard.
- Local Group Policy: I'm still surprised this is included, given that it otherwise only comes with W8 Pro.
- Bitlocker: encrypts your drive by default OOB, no need to manage it at all.
- Network browsing & sharing: really it's just a doddle to set up, using HomeGroup or just browsing the local network, access to all your network files OOB without installing any apps.
- PlayTo: again, painless to set up and use, streaming all your media to DLNA devices.
- Flash support, works just fine, and easy enough to add 'supported' sites to the list.
- Explorer / File History / Disk management, really the whole suite is there without sandboxing or more apps needed for handling basic tasks. So refreshing after iOS especially.
- Admin tools / Powershell: the list of is impressive - full Task Manager, Event Viewer & Performance Monitor all included - and I was delighted to find Powershell in there too, especially since it's finally integrated into Explorer properly. Such a great, under-rated utility!
- Media support: although I do miss a desktop media player with previews in Explorer, and better codec management, I was surprised by how quickly devs are stepping up to support different media types. Free apps already support mkvs and the like, and a VLC port is planned. I'm optimistic that this will get better.
So basically, once you get past the point of accepting that you can't install legacy desktop programs or drivers, it's pretty much a solid Windows experience. I think the keyboard & typing speed is now my only major issue ... but I've almost convinced myself I can live with it so probably won't be returning it.
Thanks for listening.

How to make SAP B1 connection with Windows Sharepoint Service 3.0

how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
public bool ConnectToCompany()
            oCompany = new SAPbobsCOM.Company();
            oCompany.Server = "192.168.1.58";
            oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
            oCompany.CompanyDB = "SBODemoUS";
            oCompany.DbUserName = "sa";
            oCompany.DbPassword = "abc";
            //oCompany.UseTrusted = true;
            oCompany.UserName = "manager";
            oCompany.Password = "manager";
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
            oCompany.LicenseServer = "192.168.1.58:30000";
            int i = oCompany.Connect();
            if (i != 0)
                return false;
            return true;
protected override void RenderContents(HtmlTextWriter writer)
            if (conn.ConnectToCompany() == true)
                writer.Write("Hello" + this.Context.User.Identity.Name);
Edited by: bikalg on Nov 28, 2010 9:43 AM

Hi.......
Welcome to SAP Business One Forum.....
Unfortunately this is the wrong forum you posted here.
I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
Regards,
Rahul

Why ('ontouchstart' in window) is false on a touch tablet with Windows 8

I use Java Script to determine if my Web-Site is running on Tablet touch device
The device is Assus tablet with windows 8

Are you assuming that the return value is false because it is not true? According to [https://github.com/phoboslab/Ejecta/pull/173 this], null is sometimes returned instead of true. If false is actually returned, then I would think it is a fault with the tablet's browser. Either that or in the browser's settings there are options to pretend the device is something else (for testing purposes); there is no reason why these should be selected by default though.
If that's no help then please give us further details (such as the browser you are using).

How to defrag & cleanup Satellite C650 with Windows 7

How to defrag & cleanup Satellite C650 with Windows 7?

Hello,
Moreover I can suggest you to:
1) Perform a regular disk error-checking (check this as an instruction http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors)
2) Perform a virus scanning with an antivirus e.g. Microsoft Security Essentials
3) Check you computer for performance issues and resolve them (go to Start => type 'Performance Information and Tools' hit Enter, in a new window on the left side click 'Advanced tools' and review the performance issues enlisted (if any).
Good Luck!

I have take pictures from my ipad 4. How to download to my computer with windows operating system conneted through USB cable with out using internet

I have take pictures from my ipad 4. How to download to my computer with windows operating system conneted through USB cable with out using internet

Plug your iPad into your computer. THere may be a delay while it installs drivers but if you can see your iPad in windows explorer, use that to get to your photos.
Click on your iPad and you should see a DCIM folder. Click thorugh that to find your photos.
Windows explorer will see your iPad as nothing more than a digital camera, and that's the part you're trying to access.

Yoga tablet 2 windows 8.1 miracast issue

hi all, i seems unable to connect to my LG smartTV from the Yoga Tablet 2 Windows 8.1 by Miracast, it always prompt unable to connect... anyone have the same issue? many thanks. brgds/fred

Paputo- Running powercfg /a on my Yoga Tablet 2-1051 yields "The following sleeps states are available on this system: Standby (Connected)" which suggest to me that it is supported. It doesn't mention Hibernate and Fast Start being available though. Hope this helps.

How come iTunes is not compatable on my Surface tablet with windows 8?

I got this tablet and it wasmeant to replace my older laptop. But everytime i try downloading itunes for my phone, it says 'The app cant be run on my PC". This is a huge reason of why even got the tablet. As i talked to a technician for windows, they said it was up to apple to make it compatible. I was curious when this is going to happen because it not being compatable is a big pain considering how iTunes hold all the info that my iPhone holds.

Okay, here's what's going on:
1. The Windows 8 name is actually applied to two operating systems that are designed to look and feel the same- one for your standard "x86" processors like the ones made by Intel and AMD that power most PCs and laptops, and one for "ARM" (and ARM derivitative) processors, like the ones that frequently power tablets and phones.
2. The x86 Windows 8 devices are backwards compatible with stuff designed for Windows 7 (and Windows Vista, and some Windows XP stuff). So they'll run itunes, etc..
3. The ARM version of Windows 8 devices is only compatible with stuff designed for Windows 8 specifically, usually sold through the Windows 8 store and displayed as a tile on the main screen once purchased (The major exception being Microsoft Office, which can run in desktop mode). This is because stuff designed for Windows 7 and before was compiled for x86 processors, an ARM processor doesn't know what to do with it.
3. Your Surface RT device is powered by an ARM processor, so you have no backwards compatibility.
4. Itunes is right now compiled only for x86 processors, and those will only work with Windows 8 machines with x86 processors, which you don't.
5. Apple may or may not decide to release a version of itunes that's compatible with the ARM version of Windows 8 (frequently referred to as Windows 8 RT). We just don't know, because they haven't said that they will or they won't. Right now there is no compatible version.
6. So your options are to use music software that is compatible with Windows 8 RT (I am guessing it comes with some version of Windows Media Player), wait till Apple comes out with a version of Itunes for Windows RT (Which it may or may not do), or return your Surface RT and buy a more traditional laptop with an Intel or AMD processor instead (The version of Windows 8 that can run on those chips can do itunes in desktop mode).
Sorry to be the bearer of bad news. I can see where this would be a little confusing. Microsoft probably should have given it's ARM-based operating system a name other than "Windows".

How to root Lenovo Yoga Tablet 2 pro

I want to root my Lenovo Yoga Tablet 2 pro (android version 4.4.2), but I dont want a bricked device. So, can someone please help me? Send a tutorial, download link..? I would be so greatful, thanks.

just reflash with intel's phone flash tool, and all is getting back to stock. no need to clean or other stuff... just select the flash.xml (not others xml). if you peek inside the file you will see that he is creating and formatting the partitions again so whatever was on your emmc (tablet's equivalent hd) is gone. as long as you didnt mess around with bios reflashing with that xml will get you back in time to the place you were when you first started your tablet (assuming you are flashing the same rom)Lenovo implemented Secure Boot (or as we know it better as 'locked bootloader') so as long you didn't mess with bios (and i don't think you did) theres no way anyone could tell that the tablet was rooted sometime. the rooting method used now is "online" after the secure boot has done his job of starting the kernel.not my case coz i will sodomize my bios to bypass the secboot (i want to install linux and windows, just for fun, and this tablet would be fun for me running linux and a chroot with android, so that I WILL SECURE BOOT android ) and anyways i can get back anytime (worst case i have a flash burner)

How to recover passwords, and favorites from Windows.old

I had to install Windows 7 over Windows 7 due to an error I had. I need to recover my passwords/favorites in some way or another. The reason I had this put under Sync is because I had my computer synced to my phone.
First off is it possible to recover the data from the Windows.old file? (Any way how to)
-Ive tried the way I found on google that did not work.
Secondly, when I am in the process of syncing to my phone it gives 3 options on the advanced options, I obviously hit the "Replace all data on this computer with my Sync data".
It says I have 88 bookmarks, but it says that they are on the computer. So that obviously means that they should be able to be recovered without syncing. How would I go about recovering them without replacing everything on my computer with my phone.
Third off, if it is possible to recover my passwords from the Windows.old then please let me know. Thats the most important thing to me.

Hello! It would be nice to have a migration script in Bridge too...
In the past, there were folders you could copy, but given the database changes, I'm not sure, I need to check first with the team.
On a Mac, it is in the collections folders in ~Library/ApplicationSupport/Adobe/Bridge CS5/Collections/
PC(XP): C:Documents and Settings\user\Application Data\Adobe\Bridge CS5\collections
VIsta/7: user/app data/roaming/Adobe/Bridge CS5/Collections
Hope this helps

X61 Tablet with Windows 8 - no tablet function

Hi I have just updated an old laptop with Windows 8 (Microsoft has a great offer right now = it is only a great offer if it works ;-) )
The PC is a: Lenovo ThinkPad X61 tablet 7767.
But I am having issues with the tablet interface. Windows 8 has been designed to tablets...
With the virgin installation, the tablet interface does not respond.
The tablet is found in the Device Manager:
+ Human Interface Devices
HDI-compliant device (3 lines)
Wacom Penable Dual Touch
All control programs are in place, calibration program can be opened, but there is no response from the tablet (pen or touch). I have looked at the lenovo support site, and downloaded various drivers, most with no effect, others caused windows blue screen - which in windows 8 is more light-blue greenish.
I have also Installed ISD_DualTouch_710-9 from Wacom.eu, this gives the most positive result.
Both pen and touch works (no dual touch), but is unaligned (when in a corner, pointer is 2cm from corner x and y. center of screen is aligned)
I cannot calibrate, neither pen nor touch. Running tabcal (from control pannel or commandline) gives 4 popup windows with error messages:
1) Failet to enumerate the installed digitiser devices.
2) No suitable hardware was found to calibrate.\nWindows supports calibrating only integrated digitisers.
3) Invalid display was specified.The Device manager lists the tablet as working:
+ Human Interface Devices
HID-compliant device
Wacom Device
I have tried to find a file holding the calibration; I found a ISDTablet.xml, that looked right, but editing it has no effect and rebooting resets to original value. (The file has a calibration section with coordinates of 4 points)
Secondary, I can't get the buttons on the tablet to work (Ctrl-Alt-Del, Rotate, Toolbox, Esc and cursor joystick).
Any ideas are greatly apreciated ;-)
Casper
Solved!
Go to Solution.

check this topic

Video Format Total Solution: How to Convert and Edit Video on Windows/Mac

More and More video formats are coming out with different video encoders and it makes our spare time more and more colorful. However, it is not to say that there is no problems. Actually, different video formats make it difficult to share video with others, even your own camcorder and iPod. Is there an easy way to convert videos effectively. Yes, there is.
In this article, I will show you guys how to convert videos on windows and mac.
Part 1. How to Convert and Edit Videos on Windows
For Windows users, you need a Video Converter(http://www.aiseesoft.com/total-video-converter.html) to do that for you.
Here I use Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
Step 1: Download and install Aiseesoft Total Video Converter
After you download it to your computer, double click it and it is really easy to install.
You just need to click “next” and it will complete it in seconds. It will automatically run after installation.
http://www.aiseesoft.com/images/guide/total-video-converter/screen.jpg
Step 2: Load Video
Click “Add File” to find the video that you want to convert and click “open”. It will be loaded automatically.
Step 3: Select the target to decode
In the “Profile” drop download list you can find your target according the usage of your output video, such as if you want to put the video on your iPod touch, you can select the “iPod” in the first list and “iPod touch 2 MPEG-4 640*480(*.mp4)” in the second list.
Step 4: Set Advanced Parameters
After you select the right output profile, you can click “setting” button to set your advanced parameters. You can adjust video and audio settings separately. In video section, you can change “video encoder”, “resolution”, “frame rate”, “video bitrate”In audio section, you can change “audio encoder”, “sample rate”, “channel”, “audio bitrate”If you want to save this profile and settings and use it next time you can click “save as” button to give a name to it. And the next time you want to use it you can find it in the profile list named “user defined”.
Step 5: Choose a Destination
To browse and find a output folder for your output files or just the default one.
Finally, Click “Convert” button to begin your conversion, here in the converting
interface you can choose “shut down the computer when conversion complete” or “open output folder when conversion complete” or you just do not choose neither one.
Tips: How to Edit the Output Video
This video converter is also a video editor, you can use it to edit your output video as follows:
http://www.aiseesoft.com/images/guide/total-video-converter/effect.jpg
1. Effect:
You are allowed to adjust the “Brightness”, “Contrast”, “Saturation” and you can choose the “deinterlacing” to make the video more enjoyable.
2. Trim:
In “Trim” section you can pick up any part of the video to convert.
There are two ways to select the part of the video you want. One is set the start and end time in the box. The other one is to drag the start and end button in the processing bar.
3. Crop:
This function allows you to choose a certain play area to convert. That means you can choose a part of the screen you like to convert. For example, you just like the tv in the middle of the screen, then you can drag the frame around the preview window to select the tv and the output preview will show you the output video.In this section you can also choose the “zoom mode”, such as “keep original”, “full screen”, “16:9”, “4:3”.
4. Watermark
In the section, you can add a watermark on the output video to show people something, such as your name, website, studio name or other things. The watermark could be words and picture. You can adjust the transparent of the watermark easily to make it more beautiful.
Part 2. How to Convert Video on Mac
This time you need a Video Converter for Mac(http://www.aiseesoft.com/video-converter-for-mac.html)
Step 1: Add File
Click “Add File” button to load the video you want to converter
http://www.aiseesoft.com/images/guide/mac-video-converter/steps.jpg
Step 2: Choose profile and adjust settings
You can find your output video format from a drop-list called “Profile”You can also adjust the specific settings of the output video, such as “Resolution”, “Bitrate”, “Encoder” and so on.

@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How do i sync my ipod with windows media player?

how do i sync my ipod touch 4 generation 8gb with windows media player?

123abcshay wrote:
how do i sync my ipod touch 4 generation 8gb with windows media player?
An iPod Touch will require iTunes.
Stedman

[SOLUTION] How to recover a Yoga tablet 2 with Windows 8.1

Similar Messages

Maybe you are looking for