Solution is not reflecting from SMSY to SMD

Hello Experts,
I have finished configuring SMD and now I am adding SMD agents in remote systems so that they can be seen in my SMD.
The problem which I am facing is that when I create a solution in Solution manager I cannot see that solution in my SMD.
Previously I had 3 solutions in Solution Manager and they are reflecting in my SMD.
But Now when I am adding new solutions to solution manager they are not shown in SMD.
Could you please let me know how I can update information from my solution landscape on to SMD.
Regards,
Gurudath Pai

Hello Pai,
I have the same problem, Could you tell me please how you fix it?
Iu2018m using SolMan with SPS 17 and smdiag_wizard is not used anymore (the landscape should be automatically replicated to the SMD)
Thank you,

Similar Messages

Net value is not reflecting from order to Invoice

Hi,
I need some clarification here: I can able to see the Net value in the sales order but the same thing is not reflecting in to the invoice.
What could be the reason and Error message is : Pricing error in ITEM 000010 in Invoice.
Your suggestions are most welcome.

Dear,
there may be the incomplete in the order. one condition is missing in the sales order.
This is because of condition record of particular condition is not maintained at the time of sales order.
you can update the pricing in the order if Invoice is not generated . If invoice is generated you can update in invoice itself.
If your query wiill be resolved then reward me.
Regards,
Narasimha

Delta data changes are not reflecting from ODS to another infocube

ODS1 --->Infocube1 - Field1,field2,field3
ODS2 -
> Infocube 2 -
Field 2-1,2-2,2-3,field2-4
Both datasource information are totally different.
Delta changes are captured in the field3 in ODS1 and Infocube 1 also.
Field3 and Field 2-3 is the same field .Infocube 2 - I have included infoobject and populating the value from ODS1-Field3.
The question is
Whenever I capture the changes from ODS1-field3 -the similar changes also needs to be updated here in infocube2 -field2- 3.
Start routine : I have created code like ,
SELECT field1 field2 field3
INTO CORRESPONDING FIELDS OF TABLE IT_field
FROM /BIC/aods1.
Update rule routine : Select the field2-3 in the characteristic- routine
READ TABLE IT_field INTO LS_field
WITH TABLE KEY
field1 = COMM_STRUCTURE-field2-1
Field 2 = COMM_STRUCTURE-field2-2.
Result = LS_field -field2-3.
If I load the full load to infocube 2 -no problem.
Is their any other way Can I capture the transactional data changes in infocube 2.
Advance thanks

Thanks for quick update. You are right.
There is no problem from ODS1 --->Infocube1 - Delta is working properly.
My question is ,
ODS1 has a field 3. Whenever new changes happen for this field3 - I have to capture the simialr changes in the Infocube 2 and the fieldis 2-3.
field3 and field 2-3 is the same field infoobject .
Whenever the changes occurs inthe tranasation - ODS1-field 3 will capture the changes. How can I capture the similar changes in Infocube 2 and the field 2-3.

Message sent from RWB but not reflected in SXMB_MONI

Hello Experts,
I have a SOAP - RFC synchronous scenario. I am sending a message from RWB to PI system.It shows message sent in RWB and the message details are reflected in the RWB->message monitoring ->Adapter Engine as 'Successfull'. But no in RWB->message monitoring->Integration Engine.
The message does not reflect in SXMB_MONI either. All other scenarios are working fine except this.
Also on checking the status of Sender communication channels in RWB it shows 'yellow' with reason channel may be inactive or unitialised. Whereas i have checked the communiaction channels in ID, their status is Active.
Kindly advice a solution.
Thanks in advance,
Elizabeth.

Hi,
Your message processed from sender adapter. But seems there is some problem in reaching IE. Check out your wsdl file. check when define a web service, have u given right url. Is it like this
http://[server]:[port]/XISOAPAdapter/MessageServlet?channel=:[sender communication channel service]:[sender communication channel name]
and also make sure whether you given the right http port name, sender business system name , sender message interface in the following step of define web service. and the port name is important you can fine http port for your PI server by going to SMICM tcode. in that press shift + F1
You altova xmlspy software for testing purpose. You can download free 30 day trial version from altova website. once you installed in it.
Go to xmlspy software. the menu you can find a "SOAP". underthis menu you can find create soap request. select that it will ask the wsdl file. give the wsdl file which you are created in define web service step. after that in xmlspy
menu->soap->send request to server. then it ill ask user name and password to connect with the PI server. then you will get the rfc response if u successfully connected with PI sever.
for more details,
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID1437447550DB12110496670821140257End?blog=/pub/wlg/4550
but in this website they didnt use xmlspy some other third party software. good luck
Regards,
Balaji

Free goods not reflecting in PO from Info Record

Hi,
My requirement is , when ever i order 100 qty from a vendor 10 qty should be delivered free of cost.
I am trying to maintain Info record for the same..
Now when i created PO for the same...I entered 100 qty..it is not reflecting 10 qty in another line in PO..
Where i am wrong?
Uts

HI,
Have maintained the values in
*Spro-Purchasing-Discount in kind-Define & assign discount in kind schema-Maintain free goods schema*
It will be available in standard SAP if not do the following configuration
Here
Usage -N
Application -M
create procedure NR0001
In control data
step-10
Cond Type-NR00
Then save.
Next
Define free good schema
Here assign ur schema grp of vendor
Then assign the procedure created previously (i-e) NR001 & THEN SAVE.
The above configuration is very important for the free goods scenario to work.
Then go to MM and in purchasing view and give the value 2.
Then in MBN1 create the condition record for the IR -0.
Then create the PO it will work definetly.
9884057038
murugan
Edited by: Murugan mgl on Jun 17, 2009 6:58 AM
Edited by: Murugan mgl on Jun 17, 2009 6:59 AM

DataGrid not reflecting changes after INSERT into Table. Delete from Table does.

Wow, it's been a while.
Hope you guys can help.
This is my DataGrid:
<DataGrid DataContext="{StaticResource TableAssetsViewSource}" ItemsSource="{Binding}" x:Name="TableAssetsDataGrid" AutoGenerateColumns="False" EnableRowVirtualization="True" Margin="15,10,10,10" RowDetailsVisibilityMode="VisibleWhenSelected" Grid.Column="1" HeadersVisibility="Column" CanUserResizeRows="False" IsReadOnly="True">
<DataGrid.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="BorderThickness" Value="0"/>
</Style>
</DataGrid.CellStyle>
<DataGrid.Columns>
<DataGridTextColumn x:Name="NodeColumn" Binding="{Binding node}" Header="VS Number" Width="*"/>
<DataGridTextColumn x:Name="SerialColumn" Binding="{Binding serial}" Header="Serial Number" Width="*"/>
<DataGridTextColumn x:Name="NameColumn" Binding="{Binding name}" Header="Asset Name" Width="*"/>
<DataGridTextColumn x:Name="TypeColumn" Binding="{Binding type}" Header="Asset Type" Width="*"/>
<DataGridTextColumn x:Name="_dateColumn" Binding="{Binding date}" Header="Date Allocated" Width="*"/>
<DataGridTextColumn x:Name="PoColumn" Binding="{Binding po}" Header="Purchase Order" Width="*"/>
</DataGrid.Columns>
</DataGrid>
This is where I add a new Row to the Table:
Private Sub Button_Click_1(sender As Object, e As RoutedEventArgs)
Dim cbblocation As ComboBox = Me.FindName("LocationComboBox")
Dim row As DataRowView = DirectCast(cbblocation.SelectedItem, DataRowView)
Dim cbbtext As String = row.Item("node")
Dim cbbtype As ComboBox = Me.FindName("comboBoxType")
Dim cbbtext2 As String = cbbtype.Text
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.AddNewAsset(cbbtext, txbSerial.Text, txbName.Text, cbbtext2, Date.Today, txbPO.Text)
node = cbbtext
Dim mp As New MainPage
mp.RefreshGrid(node)
Me.Close()
End Sub
The RefreshGrid method:
Public Sub RefreshGrid(node As String)
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.FillByNode(RETAILISOAMDDataSet.tableAssets, node)
Dim TableAssetsViewSource As System.Windows.Data.CollectionViewSource = CType(Me.FindResource("TableAssetsViewSource"), System.Windows.Data.CollectionViewSource)
Dim be As BindingExpression = BindingOperations.GetBindingExpression(TableAssetsViewSource, CollectionViewSource.SourceProperty)
be.UpdateTarget()
End Sub
And this is what I use to delete a row from the table (and without doing anything special, the DataGrid auto-updates with the changes):
Private Sub Button_Click_4(sender As Object, e As RoutedEventArgs)
If TableAssetsDataGrid.SelectedIndex = -1 Then
MsgBox("You have selected nothing to Delete!", MsgBoxStyle.OkOnly, "Nothing Selected")
Else
Dim dgv As DataGridTextColumn = Me.FindName("NodeColumn")
Dim row As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText As String = row.Item("node")
Dim dgv2 As DataGridTextColumn = Me.FindName("SerialColumn")
Dim row2 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText2 As String = row.Item("serial")
Dim dgv3 As DataGridTextColumn = Me.FindName("NameColumn")
Dim row3 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText3 As String = row.Item("name")
Dim dgv4 As DataGridTextColumn = Me.FindName("TypeColumn")
Dim row4 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText4 As String = row.Item("type")
Dim dgv5 As DataGridTextColumn = Me.FindName("_dateColumn")
Dim row5 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText5 As String = row.Item("date")
Dim dgv6 As DataGridTextColumn = Me.FindName("POColumn")
Dim row6 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText6 As String = row.Item("po")
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.RemoveAsset(dgvText, dgvText2, dgvText3, dgvText4, dgvText5, dgvText6)
Dim cbb As ComboBox = Me.FindName("cbbLocation")
Dim row7 As DataRowView = DirectCast(cbb.SelectedItem, DataRowView)
Dim cbbtext As String = row.Item("node")
RefreshGrid(cbbtext)
End If
End Sub
--------- End of Edit
It is bound to a Dataset which gets it's data from a SQL Database.
Loading the Data and Filtering the data based on certain conditions work 100%. The problem I am having is as follows:
I have a form on the Page that takes input and inserts a row into the Database. When this happens, the DataGrid won't automatically reflect the changes (even if I recall the Fill Method of the Dataset). No matter what I do, I have to refresh the entire page
and THEN Fill the Dataset to see any changes.
This is what strikes me as odd...
When I do a delete row operation on the Database (Custom Method on the Dataset with conditions), and just Fill the Dataset again (without doing anything special), the row deletes and the changes is reflected IMMEDIATELY.
What am I doing wrong here? Why would Delete Row reflect the changes on the DataGrid but no Insert Row?
Thanks in Advance.
(P.S. I am very rusty with my developing skills, I haven't done this in YEARS)

>>And what about the the most important question, how exactly is TableAssetsViewSource defined in the XAML markup and what is
its Source property set or bound to? And what about the reproducable sample...?
Here is the Markup of the TableAssetsViewSource:
<Page.Resources>
<local:RETAILISOAMDDataSet x:Key="RETAILISOAMDDataSet"/>
<CollectionViewSource x:Key="TableRegionsViewSource" Source="{Binding tableRegions, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableLocationsViewSource" Source="{Binding tableLocations, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableAssetsViewSource" Source="{Binding tableAssets, Source={StaticResource RETAILISOAMDDataSet}}"/>
</Page.Resources>
The ItemsSource of the DataGrid is bound to the TableAssetsViewSource:
<DataGrid DataContext="{StaticResource TableAssetsViewSource}" ItemsSource="{Binding}" x:Name="TableAssetsDataGrid" AutoGenerateColumns="False" EnableRowVirtualization="True" Margin="15,10,10,10" RowDetailsVisibilityMode="VisibleWhenSelected" Grid.Column="1" HeadersVisibility="Column" CanUserResizeRows="False" IsReadOnly="True">
Just remember, this code was auto-generated with the drag & drop onto the Page, so I did little in terms of setting the actual bindings.
All in all, what I have done so far works as intended, except that when I want to add a row to the table it does not reflect, and that it only shows after refreshing/restarting the application.
I will try and put together a reproducable sample.

"Error occurred in deployment step 'Retract Solution': The solution does not have a WSP file associated with it." occurs while deploying from Visual studio

HI,
I get this error "Error occurred in deployment step 'Retract Solution': The solution does not have a WSP file associated with it. " when deploying my project from visual studio 2010 to
SharePoint 2010 site. I tried restarting IIS, but it didn't help. This application used to work fine until the server crashed during the deployment process. All the other applications on the same server works fine also. Any ideas how to fix this issue?
Thanks in advance,
AM

Hi
AM ,
Thank you for your posting!
According to your error message, it says your solution does not have a WSP file associated with it. Take a look at the file system. After you Right Click -> Deploy Solution on the VS Solution, there
should be a .wsp file at <Solution Directory>\bin\<debug|release>.
Also the error can be occurring when the developer try to deploy solutions over pre-existing solutions with material changed in the solution. Go to your Central Administration Site and then
Operations and then Solution Management. Make sure that there not already a solution with the same name deployed or installed there. If there is, remove it and try deploying again.
And you could look in logs and find if there is a below error in ULS log (C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS).
Thank you for your understanding and support.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Changes are not reflecting while executing the SAP script from report

HI,
In SAP-script we are nmaking changes in form in client 130
it is showing the changes in 140 client but while excuting the report the same are not reflecting in the output.
Thanks in Advance
Naveen M

Hello.
Scripts are mandant depentant. So you must copy from 130 to 140 for changes take efect.
Do it in transaction SE71 in mandant 140, first screen, in the menu options.
And never forget to activate it in all mandants.
Best regards.
Valter Oliveira.

Changes are not reflected when objects transported from Quality to Productn

Hi
In case of moving some Transport requests from Quality to Production, some times the changes made to the selection screen of a report program doesn't reflect in Production. Also we don't see any Transport error while transporting. Moreover, we can see the changes by regenerating the Program in production.
Would any one help me out in this with the reason for this.
Pls suggest what needs to be done.
Satish.

HI,
Thanks for the reply.
- I have checked the respective transport too, and every thing seems to be fine.
- Recently we went to go live, for the next release, so earlier before go live, we didnt faced any proble.. Only now we are facing this problem, that we find the changes relating to selection screen are not reflected when the object / prog is moved from qty to Prd.
- Only problem is with the selection screen.(not getting reflected in PRD. In Qty we are able to see those changes.
- Then in order to reflect these changes in PRD, we have to re generate the object, then only it get s updated..
Satish.
Edited by: satish c on Sep 22, 2009 3:35 PM

Changes made from application are not reflecting in Database and vice versa

I am updating changes from my Application. However the data in not reflected in the DB. I logged in and can see no change. However, the changes are being reflected in the Application, even after a server restart. Any ideas on this ?? its wierd !!

SELECT   c.sql_text sqltext
    FROM v$session a, v$sqltext c
   WHERE a.SID = :session_id AND a.sql_address = c.address(+)
ORDER BY a.status, a.last_call_et, A.SID, A.username, C.pieceSQL_ADDRESS
SQL_HASH_VALUE
SQL_ID
SQL_CHILD_NUMBER
Check this to see the last executed sql in your database , make sure you connect to right database with right schema
Last executed sql

Solution Manager data upload/synchronize from SMSY to Marketplace

Hi Experts,
One of our SAP System data has got deleted from SAP Marketplace system data maintenance section. The data is available in SMSY transaction of our solution manager system.
I would like to know if there is any way that we can populate/synchronize the data available in SMSY to Marketplace System Data.
Please advice on this.
Rg,
Sandeep.

Hi Anil,
This issue is resolved now and i was able to populate data from SMSY to System data in marketplace.
using SMSY - select system - system data in support portal - synchronize.
It uploaded data from SMSY to OSS and all details are visible now.
Rg,
Sandeep.

WSP deployment to multyiple fronend server in sharepoint 2013 not reflecting the updated solution

Hi I have created a wsp package and deployed it to the multiple front end server. It was working fine on initial deployment. However after doing some change in JS file, I update the solution (through PowerShell update solution command) and found
it's not reflecting in Browser . Even if i have checked the file in both front end are updated (in 15 hive).
Thanks and Regards
Er.Pradipta Nayak
Visit my Blog
Xchanging

If the files are updating on the front end servers, but not showing changes in the browser then the problem is that the .JS files have been cached by the browser. You need to clear the Browser cache after this kind of change before the change will
be reflected in the browser. You can manually clear the browser cache in IE using the developer toolbar [F12].
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

When I add music from my CD onto my Macbook, the music will not transfer from iTunes on my Mac to my iPhone/iPad. I'm using iCloud, current software updates and Music Match. Any solutions?

When I add music from my CD onto my Macbook, the music will not transfer from iTunes on my Mac to my iPhone/iPad. I'm using iCloud, current software updates and Music Match. Any solutions?

I figured it out...user error

Is there a solution for graphs that do not translate from Excel to PDF?

We are working on an Excel Spreadsheet with graphs but when we create a PDF of the sheet the graph does not contain the ledger or values. Is there a solution to this problem. We have tried both printing to PDF and exporting to PDF.

Just a note: If you want to print the PDF to paper, it may still not print correctly even though it looks correct on the PDF document- the printed graph may flow off of the paper sheet. When you click Print, a print dialog box opens with some options and a preview. If the preview does not look correct, change the size option to "Shrink oversized pages".
Jeffry Calhoun
Workforce Analytics Manager
Ohio Department of Job & Family Services
P.O. Box 1618, Columbus, OH 43216-1618
InterAgency: F376, 4020 E. 5th Avenue
614-644-0564
Fax 614-728-5938
[email protected]
OhioMeansJobs.com -
The next best thing to having an HR department.
OhioMeansJobs.com -
Ohio's premier website for connecting businesses and job seekers - quickly, easily, and for free!
>>> alscud <[email protected]> 4/9/2012 9:34 PM >>>
Re: Is there a solution for graphs that do not translate from Excel to PDF? created by alscud ( http://forums.adobe.com/people/alscud ) in Creating, Editing & Exporting PDFs - View the full discussion ( http://forums.adobe.com/message/4323530#4323530 )
Thank you Lori for your help your suggestion works!
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4323530#4323530
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4323530#4323530. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email ( mailto:discussions-community-acrobat-creating__editing_%[email protected] ) or at Adobe Forums ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697 )
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Ohio Means Jobs
You're looking for something unique. Use more than an ordinary site.
http://www.ohiomeansjobs.com
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.

I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck!

Solution is not reflecting from SMSY to SMD

Similar Messages

Maybe you are looking for