Solution .Itunes does not recognise your your burner

If itunes does not recognise your burner, look in (my computer) if you have more drive than you actually have.if this is the case, you have a logical drive. You must go in your control panel and disable it. When you will try to burn .Itunes is gonna see your burner and ask you if you want to use it .

I also have a similar problem.
I have an 80g. Library was in fine working order.
Now, I had my computer wiped out, with a new itunes library.
I want to transfer my ipod music to my itunes library, but all of the programs to help me do this will not recognize my ipod, even on disk use and manual settings.
What do I do without clearing my ipod music?

Similar Messages

  • Itunes does not recognise CDs................please help

    i've had my ipod for a few months now and it hasnt been a problem before as it has always imported CDs fine onto my ipod but recently whenever i insert a CD into the drive itunes does not recognise that i have put a CD in and it cant be the CDs that i put in as i have leant one of them to my friend and she said its worked fine on her itunes, when i insert the CD and go onto run CD diagnostics this comes up,
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    FUJITSU SIEMENS P5SD1-FM2
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce 6200SE TurboCache(TM)\GeForce 6200SE TurboCache(TM)
    IDE\DiskST3160023AS____________________________3.00___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STDVDRRW_GWA-4164B_______________1.03___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: HL-DT-ST DVDRRW GWA-4164B, Rev 1.03
    Drive is empty.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: HL-DT-ST DVDRRW GWA-4164B on -128(0xffffff80) media at speed 0X.
    i dont even understand what this means, please help!!!!!!!!!!!! thanx xxxx

    Well the report just tells basics of your setup and errors going on in short. Error -128 means either you or iTUnes cancelled the burn before it even started.
    Your issue tho is you have no lower filter. you should have 2, and upper filter and a lower filter. Now Im not that good with the filter thing just yet, but I think if you reinstall itunes it will install the lower filter you need.
    You will want to remove itunes AND quicktime in the control panel>Add/remove. Dis able any antivirus/security programs so they do not interferr with iTUnes and then download and install the latest iTunes from www.apple.com

  • HP dv7 notebook PC does not recognise the dvd burner.

     HP dv7 notebook with win7 64bit does not recognise the dvd burner.A diagnostic check says the dvd is working but it cannot play or burn CDs,DVDs as the DVD does not appear with the other HDs in the computer window.Can anyone help?

    Hi,
    It's possible that this is a hardware issue with the optical drive itself, but try running automated fixit from Microsoft on the link below.
    Windows 7
    Check if the drive is now working.
    If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter.
    sfc /scannow                 ( note that there is a space between sfc and the / )
    Let the process complete, then type exit and hit enter. 
    Next, click the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if it now works.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

    i changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

    In your case you can only restore from a backup that has been created with the same iOS version. An iPhone 4 can only run 7.1.2, and, unless your iPhone 5 did not run the same version, you can't use a newer iOS backup of the 5 on the iPhone 4

  • Itunes does not recognise ipad or iphone after window 8.1 patch May 2014

    Last week my laptop did a patch update to windows 8.1 and now  Itunes does not recognise  my ipad or iphone when i plug them into the USB ports.
    The devices do ask "to trust the computer" and Windows itself reconises the ipad and iphone and i can get to files on the apple products through windows but itunes doesnt see them and therefore doesnt sync  therefore i cant download music onto my phone etc.
    Ps i did uninstall itunes and reinstalled but this didnt work.  Although after reading about other people with similar  issues on past window updates I think  I may need to uninstall all apple software .
    I have an old Ipod 5G that works fine with Itunes.
    Anybody with similar issues and a plan to get this sorted ?...... as i need music on my phone for holiday !!

    Hello andyv,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue of your iPad not being recognized by iTunes on your Windows PC please follow the troubleshooting in the article below:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Take care,
    Alex H.

  • I have forgotten my pass code how can I unlock my iPhone 4 without using iTunes as my iTunes does not recognise my phone

    My iPhone 4 has not been working for the last 4months....I have just recently decided to give it another go and it seems to be working but I forgot my password. I would use iTunes to reset but my iTunes does not recognise my iPhone.... Is there anything that can be done

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • Itunes does not recognise the ipod after update to itunes 8.2.0.23

    Hi, Now find, after putting new songs in my play list, that when I plug in ipod to update songs on ipod itunes does not recognise the ipod.
    The version of iTunes I updated to was 8.2.0.23 - everything worked fine until then. I see there is a newer version 8.2.1 now available - do you think by installing this the "unable to recognise" problem would be fixed???
    Thanks for your thoughts!

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • HT1923 itunes does not recognise CD's uploaded ,    can't connect to server it states  ,

    itunes does not recognise CD's uploaded 
    can't connect to server it states
    although PC is connected to the internet itunes can't find the connection 
    have an ipod nano
    this is complicating things as I can't change what's on the ipod either

    Try a hard reset by pressing the Home button and Wake / Sleep button at the same time, keep them both pressed until the Apple Logo appears on the screen.
    This does not lose any data on your iPad.

  • Iphone has gone to a screen to plug in itunes, but itunes does not recognise it

    I updated the software on my iphone4 and after updating the iphone has gone to a screen to plug in itunes, but itunes does not recognise it. i have reloaded itunes, done a hard reset and still nothing. any ideas?

    Gotcha,
    If you have an iCloud account you might want to consider syncing that way so you won't have to use cables but that is certainly up to you.
    Try:
    1.) Backup all your data:
    Backup your iOS device: http://support.apple.com/kb/HT1414
    Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
    Backup iCal:  Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    2.) Reset the computer's sync services and then restart the computer: http://support.apple.com/kb/TS1627
    3.) Plug in the iOS device and attempt a sync.
    --- Check the Info tab in iTunes to make sure calendars are still set to sync.
    If that does not resolve the issue let me know and I'll give you a different route.

  • Mac itunes does not recognise iphone 4s

    mac itunes does not recognise iphone 4s

    Hi!
    This contribution (enbedded link) helped me:
    https://discussions.apple.com/message/18707806#18707806
    The Huntress God\'s Waiting Room, UK 
    ""You have already been given an alternative solution to the one posted above in a different post https://discussions.apple.com/thread/4046036?tstart=0  Have you tried it? Badgering for a response will not encourage people to help you.""
    georg171

  • Itunes does not recognise ipod touch

    i've reinstalled the latest version of itunes plus ios 6 and followed the troubleshooting sections for Windows 7 PC but itunes does not recognise the ipod touch.  the USB cable is ok (charges the ipod anyway) but when I run diagnostics it does not see an ipod.

    iOS: Device not recognized in iTunes for Windows
    Try another computer to help determine if you have an iPod or computer problem.

  • I synced by ipod touch with itunes and it wiped all my music.  Now itunes does not recognise my ipod.  How can i fix this?

    I synced by ipod touch with itunes and it wiped all my music.  Now itunes does not recognise my ipod.  How can i fix this?

    Here
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X
    Does the iP{od work OK
    Does it charge when connected?

  • I have a 6th gen nano and windows 8.1. Itunes does not recognise my nano anymore. I have tunes to download

    I have a 6th gen nano and windows 8.1. Itunes does not recognise my nano. I have tunes to download

    B noir
    Yes that is correct
    Okay. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • How can i connect my iphone 4 s with itunes? itune does not recognise the iphone when it is connected

    Hi, i have received an iphone 4s from japan! whwn i connect it to my pc, itunes does not recognise it. what can i do?

    For this issue you might try a couple things.
    First, try to restart the Apple Mobile Device service by clicking Start and searching for Services. Stop the service, then restart the service.
    If that doesn't work, you can remove and reinstall iTunes.
    http://support.apple.com/kb/HT1923
    This article will help with that process. Follow it exactly.

  • 4s stuck in recovery mode. try to restore apple icon comes up but goes itno recovery again. Itunes does not recognise. I wa trying to update software from laptop to phone and errored 4005.

    4s stuck in recovery mode. try to restore apple icon comes up but goes itno recovery again. Itunes does not recognise. I wa trying to update software from laptop to phone and errored 4005.

    Hi there Schusski,
    I would recommend taking a look at the troubleshooting steps for Error 4005 found in the article below. 
    iOS: Restore errors 4005, 4013, and 4014
    -Griff W. 

Maybe you are looking for

  • Deploying AAMEE 3.1 created MSI by double clicking it in UI mode

    With the release of AAMEE 3.1, AAMEE created MSI supports both silent and UI based installation. For UI based install of AAMEE 3.1 created packages, run the MSI as an administrator. If you are logged in as Admin user, you can double click it, otherwi

  • Install on Solaris 9 x86 error - help

    when i run the ./setup error show up # ./setup ./setup: syntax error at line 1: `(' unexpected please help thank a lot

  • BDC Recording For J1IG with Table Control Scroll bar

    Dear Friends, I am doing BDC program for J1IG Transaction after done recording. As you knows that, In J1IG transaction max. 11 materials are shows in table control at a time and if more records are there, then we have to scroll down manually so after

  • Solve the query

    Hi all, We r working on SQL queries unable to solve teh below query. "Display the names of the highest paid programmers for each language" The table relating to the query is given below. PNAME DOB DOJ S PROF1 PROF2 SALARY anand 21-APR-66 21-APR-92 m

  • Contact sheets - show version number or name in emailed images

    My goal is to email contact sheets of an assignment to clients. I think I have worked this out by using the contact sheet facility in the print menu then saving as a PDF. If there is a better way I'd love to know. What I need now is to have the versi