Solution Landscape: why Request Check-out button could get greyed out ?

Hi,
We are on SolMan 7.0, SP15, including Ent. Edition add on.
In Solution Landscape maintenance, the Business Processes added to the solution (either directly or those borrowed from a Project) cannot be checked out to a maintenance project becasue the Request button is greyed out.
A simplistic SU53 check did not come up with any authorisation problems.
I am not able to switch on trace and take that route to detect now.
Can you please suggest as to what could be the possible reasons for this to be greyed out; also, have you used the 'Adjust to Original' button to bring latest changes in Project to Solution Landscape ?
Best regards,
Srini

Hi Rutger,
Thanks for your kind reply.
There is one problem - I am not able to see in my SolMan the 'tickbox' you have mentioned about.
The only sub-sections I see in the Tab there are:
(1) Monitoring
(2) Knowledge Warehouse Information
(3) Copy Criteria for Document
(4) Session Languages
(5) Assigned Maintenace Project
If it's feasible for you, can you please let me have a look at your screenshot as to how the sections look like. I wonder if there is any component missing to be installed.
Best wishes and thanks for your time.
Srini
Hi Rutger,
Thanks for your pointer again. I got a screenshot from a different friend (on another SolMan instance). Came to know of where these check boxes should occur.
Later, I found them in my instance too - the browsing scroll bar was the culprit. One had to go to the very bottom, move the scroll to the right extreme and then move further down. Really a silly mistake.
But, without your help, I wouldn't have know that there were such check boxes at the first place
Cheers,
Srini
Edited by: Srinivasan Radhakrishnan on Sep 17, 2008 11:47 AM

Similar Messages

Does Availability Checker mean I could get 1mbps d...

Here is stuff availabilty checker says
Your exchange is ADSL enabled, and our initial check on your address indicates that it is VERY UNLIKELY you will be able to receive fixed 512Kbps or 256Kbps broadband service due to the very long length of your telephone line. However, your order will be accepted if you still wish to order. An engineer may need to visit who will, where possible, supply the broadband service.
Our check also indicates that your line currently supports an estimated ADSL Max broadband line speed of 1Mbps; typically the line speed would range between 750Kbps and 2.5Mbps.
Our check also indicates that your line currently supports an estimated ADSL2+ broadband line speed of 1Mbps; typically the line speed would range between 1Mbps and 3.5Mbps.
The actual stable line speed supportable will be determined during the first 10 days of use. This speed may change over time, to ensure line stability is maintained.
Furthermore your exchange has been enabled for multicast services on fibre lines, please contact your provider for further details.
If you decide to place an order, a further test will be performed to confirm if your line is suitable for the service you wish to purchase.
Thank you for your interest.
Please note that postcode and address check results are indicative only. Most accurate results can be obtained from a telephone number check.
Note: Provision of some services may not be allowed due to product withdrawal, please contact your service provider for further details.
Does it mean that I should get around 1mbps down - I don't understand the bit about the fixed broadband service.
I do not yet live at this post code yet and am aware actual download speed could be lower than the 1mb indicated.
Presumably I would be put on ADSL2+.
Please don't ask for any futher technical data as I don't have any.
Solved!
Go to Solution.

I'm on a 5km+ line and get 0.8-1.2mb download with a syncrate of 1.2/1.5mb.
However no lines are the same.
You may want to have a look at the link below, it gives some helpful links that looks at providing FTTC/H to the Final Third and Rural Communities.
Link here: http://community.bt.com/t5/BT-Infinity/FTTC-H-to-Rural-Areas-and-the-Final-Third/m-p/592984/thread-i...
Hope that help.
Cheers
I'm no expert, so please correct me if I'm wrong

Deactivate check-out and check-in request

The SAP-delivered process for maintaining a solution via a maintenance project is the following:
1. In the Solution Directory, select process structure element (business or interface scenario, business process, or process step).
2. Click "Request" button to request check out.
3. Click "Check out" button to approve request and check out process structure element to the Maintenance Project associated with the solution.
4. Complete the updates in the Maintenance Project associated with the solution.
5. From the Maintenance Project, request check-in to the solution.
6. In the Solution Directory, click "Check in" to check the updated process structure element back into the Solution Directory
We require neither the check-out request nor the check-in request steps for our solution. Is there a way to deactivate these?
Thanks in advance for your input,
Lori

I'm sure whether this is what you mean, but if you open you Solution by means of TC:SOLMAN_DIRECTORY and press once on the solution of your choice, you will see an overview of the properties of your solution.
If you then pick the middle tab on the right, you can set/unset the option for:
"Enable Check-out/Check-in of Solution Structure Elements".
That's it.

Why can't I check out a project?

I've got TFS 2013 Express installed on my desktop PC (an older HP Pavilion Elite desktop running Windows 8.1 Pro). Sometimes when I get into Visual Studio 2013, open up a solution and try to check out a project within the solution, with less than 100 files
in it, TFS never finishes checking out the project/files.
Why is that? What's going on and what can I do about it?
Rod

Hi Rod,
It would be better to let us know the detailed scenario and reproduce steps. When you work with TFS, you can edit your source code by Visual Studio after connecting to the team project in TFS. And you can change the source files in source control explorer
and it will be checked out automatically.
You can create a new workspace and then do a workspace mapping to get the source files to a new local path. And then try with the new workspace. If the issue persists, please elaborate more details with screenshots.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Check-out button is not disable after the check out request from the same user

HI all,
I want to use check out/ in procedure in solution manager along with email notification. For that, I have maintained required settings and maintenance project for the intended solution. I want to implement a team leader- manger hiearchy for any changes to the solution. When a team member requests for the check out for any process scenario/ step, the status goes to check out requested. But, the problem is, check-out button is not disable and same user can do the check out which I want to restrict. The check out can be done only by the project manger. I guess, this is related to authorization roles for both team member and manger. But I am not able to find out. Please help me to have the authorization roles for this.
Thanks,
Rutvik Upadhyay.

Why not putting a af:fileDownloadActionListener inside the command button. In the bean you need an method like
public void exportExcel(FacesContext aFacesContext, OutputStream aOutputStream)
} You can use the output stream and when you finished just flush it. Don't close the stream and don't complete the response.
Timo

I have reached out to this community as my Iphone display gone black and got the solution to keep home and power button pressed. It worked but I would like to know why it went black

I have reached out to this community as my Iphone display gone black and got the solution to keep home and power button pressed. It worked but I would like to know
1. Why it went black and is there a permanent fix for this
2.Will the IOS gets automatically updated as I feel the IOS was 5 when I got the phone in 2012 december
3.Do you suggest 7.1 for Iphone 4

1. There is no way of knowing. These things happen.
2. The iOS only gets updated when you want it to be.
3. You should always update to the latest iOS your phone will support. Apple do not write the updates to make your experience worse.

Authorization: Can I check-out processes from Solution in Read mode?

Hi NG.
I am building a new set of user roles, but seems to get stuck with this one.
With T-code: SOLMAN_DIRECTORY I would like to issue read access to users, but still give them the possibility to check-out processes to the maintenance project.
So far - I have managed to get the read access right, but the check-out button is greyed out (Inactive).
My wish is to keep the users from changing the contents and set-up of the Solution, but still be able to go look for a process and request the check-out when found.
Any help would be greatly appreciated!
Best Regards
Per Hjorth Christiansen

Hi Per Hjorth,
when you activate the Check-out/Check-in functionality the complete process structure of the solution will only be available in display mode. So you don't need additional authority checks to pretend changes in the solution.
In general, the authority object AI_SOL_DIR is used in Solution Directory. The activities "02 Change" and "03 Display" are available for the solution structure. In addition, an extended maintenance activity is necessary to be able to activate/deactivate the check-out/check-in functionality for a solution this is "36 Extended Maintenance".
Best regards,
Michael

How to hide check-in, check-out and publish buttons

hi,
i am new here and hope someone can help me:
users of a community can edit some content items. they can open these items with this link (from administrators guide for al interaction publisher 6.5 p. 10-28):
</pcs:value>/published_tools/content_item.jsp?&view=submit&ciid=<pcs:value expr="pcs_id"></pcs:value>" target="_blank"></a>
the link works, users can edit the items.
problem is, that i do not want to show the "publish button" to the users. the content item should be published automaticaly after the user clicks on "save". i also do not want users to see the check-in, check-out and preview buttons. they should just open a content item (+ simultaneously check-out), edit it and save it (+ simultaneously check-in and publish and close the content editor).
i thought this can be done by the "view" parameter, but nothing happens if i use it. any ideas?
thx
volker
Edited by: vhspec on 03.06.2009 00:58

Hi vhspec,
This is a common problem. A creative way to solve the problem is to point yourself to the description field of each input on a data entry template. When you have the need to make any dynamic changes to the entry templates simply drop some javascript into the description field of an input and write the appropriate javascript code to either hide buttons, change behaviour etc. When the data entry template is displayed to a user the javascript in the description field will be executed by the browsing. Fortunately publisher does not check the description fields or encode them so you can get away with a lot.
The only problem with this approach is while you are altering the UI the underlying data model will still allow users to publish. So if an unauthorised user saw fit, they could publish content.
Have you considered creating a workflow so that users in specific groups cannot publish? that way only a controller down the line would be able to approve and publish.
Edited by: user8023716 on Jun 9, 2009 2:55 AM

"This document could not be checked out." SharePoint 2010 checkout action using IE8

I am setting up a two-server farm, and most everything works, except the checkout action for a document. This problem occurs in both site collections, one of which requires checkout, and the other does not.
Here are the options I've tried:
Snow Leopard, Firefox 3.0.1 - works
Snow Leopard, Safari - works
Win 2003, IE 7 - works
XP, Firefox - works
XP, IE 8 - "This document could not be checked out. You may not have permission to check out the document or it is already checked out or locked for editing by another user."
In IE8, I am able to open a document as read only then use the button presented by Word to check out the document. I cannot use that as a workaround, as not all users have a version of Office that will allow checkout in that way.
Checkin works fine. I need to resolve the checkout error.

I was having the same problem mentioned here. I noted that this problem only appears when I use the FQDN in the URL ex 'http://hostname.domain.com/default.aspx'. If I access the Sharepoint site using the URL 'http://hostname/default.aspx', then
I do not have any problems checking files in or out.
I ran into this same error pattern when trying to do a document edit (library is set to force a check out), or do a direct check out via the ribbon menu or item context menu. Oddly enough when we would use the 'Edit Properties' ribbon button (which forces
a check out) we did not get an error and the document's status would change to 'checked out'. Below are the two messages we would receive when trying to do a check out:
IE error message - "This document could not be checked out. You may not have permission to check out this document or it is already checked out or locked by another user." - Click OK
IE Error message - "The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document." - Click OK
After trying several different suggestions I realized that I wasn't having the problem when I was accessing the site locally via FQDN but only when I was using the Public Site URL (via https). Turns out we were getting the error because we did not have
an AAM currectly setup. Once I changed our AAM for the Internet zone with the Public URL value instead of the FQDN the error went away.
Hope this helps anyone else trying to track this down. Oh and this was SP2010 w/SP1 (Patch version 14.0.6106.5001) on Win2008 R2 with clients running both Win7 and WinXP using IE8.

Why can't I check out and down load LR5?

Why can't I check out and down load LR5? Are the servers overwhelmed? Very frustrating!!!!!!!

I had the same problem yesterday trying to upgrade 4 to 5 - I ended up doing the upgrade over the telephone, where the "nice lady" said they were having a few server problems. I say "nice" but she downright annoyed me by trying every angle she could think of to flog me a full cloud subscription

TS3992 Why did it say " Backup could not be completed"? Was it because it estimated it would take 3 hours to do the backup and it was timed out?

Why did it say "Backup could not be completed"? Was it because it estimated the backup would take 3 hours and it timed out?

Welcome to the Apple Community.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

Checking for updates an error has occurred the request timed out

Whenever I try to check for an update to my software on my computer I get this message: "an error has occurred, the request timed out."
I have not been able to have a software update in many months. Any suggestions on how to fix this?
Thanks,
David

Quit all applications
Hold option key down and click the "Go" menu in the menu bar.
Select "Library" from the dropdown.
Library > Preferences
Look for the file com.apple.appstore.plist and move it to Trash.
Restart the computer.
Source:https://discussions.apple.com/message/20445064#20445064

I downloaded new os for my daughter's ipod touch. I remember during setup after that I checked off my husband's email account and now she is receiving his texts. How do I fix this. The "icloud"/ "messages" buttons are both greyed out under settings

I downloaded new os for my daughter's ipod touch. I remember during setup after that I checked off my husband's email account and now she is receiving his texts. How do I fix this. The "icloud"/ "messages" buttons are both greyed out under settings

Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
- Restore to factory settings/new iPod.
- If you are up to file manipulation see:
How to reset forgotten Restrictions...: Apple Support Communities

I get a message that itunes has stopped working. When I check out why it is because of the dep security on my computer. When I try to find the program for itunes for the .exe file i cannot find it to turn off the dep for that file

I get a message that itunes has stopped working. When I check out why it is because of the dep security on my computer. When I try to find the program for itunes for the .exe file i cannot find it to turn off the dep for that file

I found the file but when I added it to the list for the Data Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

Solution Landscape: why Request Check-out button could get greyed out ?

Similar Messages

Maybe you are looking for