Solution Manage Maintenance Optimizer Installation

Hi,
I am in the process of trying to configure maintenance optimizer for solution manager. I have performed the following pre-requisites as specified in the SAP documentation
1. Support Package 09 for Solution manager
2. Applied OSS Notes 1024932, 1008717, 0950974
3. Set up user with appropriate roles and authorizations SAP_MAINT_OPT_ADMIN
4. Activated BC Sets as dictated by OSS note 990534
5. Define a Solution
6. Assign S-user to MO user
7. Check RFC Destination and assign S-user Login details
When I enter the solution and attempt to configure MO via Change Management -> Support Package Stacks, I get as far as the screen where you select the appropriate product version. I select the product and click to continue however I receive the following message
'Condition REQUEST_IN_PROCESS is not checked without Change Management integration'
Can anyone give me any suggestions to resolve this error.

Hi Stoecker,
I am also getting same problem.i followed that note which you have mentioned.
but where do i deselet the "íntegr' field?i am not getting
can plz exploain me on this.
and also one thing i want to add SAP ECC under systems in smsy transaction.
when i am trying to add it is asking for Product key.
can u plz provide me the key?
Thanx in advance.
Thanks and Regards,
Vinnu.

Similar Messages

Solution manager "Maintenance Optimizer" System Logical Component

Hello friends!
I have some troubles with my Solution Manager!
After SPS17 installation I don't see any system in SOLUTION_MANAGER transaction.
Steps for reconstructions:
1) start tcode SOLUTION_MANAGER
2) select my solution from list (the same like in tcode dswp)
3) goto Change Management --> Support Package Stacks --> Maintenance Optimizer
4) chose product version SAP ERP 6.0 (it is assigned to my solution)
5) in appears grid I don't see system (see below)
I----II--
I
I_V_I_System_I_Logical Component_I
Before installation I can select my solution. Now it's not critical because I can confirm downloads...

Hi Luke!
I didn't solve this problem...
But I've only one system in my solution, and, as I understand, it may not be showed. But I may be wrong...

Solution manager maintenance optimizer

Hi all,
I have what I think is an issue, and hoping someone could possibly point me in the direction to correct. I have setup our solution manager system and trying to get the maintenance optimizer option working fully. I have a java system that I pull the information from SLD perfectly fine, and it lists all installed software components via SMSY>SYSTEMS perfectly. I have assigned logical components etc. I can create a new maintenance optimizer transaction, select the proper system with assigned components, but when it lists the files to be downloaded automatically I expect to see alot more files available for download than it lists for me. I assume I am missing something, but not sure where to look.
Would anyone be able to possibly point me in the right direction on what I might be missing?
Regards,
Chris

Hi Markus,
The system is SAP EHP1 for SAP Netweaver 7.0. It has the following components installed and specified in logical components:
Adobe Document services
Application server Java
EP Core
Enterprise Portal
Along with the kernel files I also get the following files available for download via maintenance optimizer (6 in total)
FORUMS06_0-10005892.SCA SP06 for FORUMS 7.01
BP_PROJ_PORT_DESIGNCOLL
BPPPMDC17_0-10003174.SCA BP PROJ., PORT. & DCOL. 4.0 SP17
BP ERP05 PROJ SELF-SERV
BPERP5PSS17_0-10003284.SCA BP ERP05 PROJ SELF-SERV 1.0 Support Package 17
BP ERP05 MAINTENANCE TECH
BPERP5MTC07_0-10004455.SCA SP07 for BP ERP05 MAINTENANCE TECH 1.2
BP ERP SITE TECHNICIAN
BPIS7TST07_0-10004458.SCA SP07 for BP ERP SITE TECHNICIAN 1.20
BP ERP ICM ANALYST
BPIS7ICMAL06_0-10006119.SCA SP06 for BP ERP ICM ANALYST 1.41
When I look at installed system components via SMSY it correctly shows everything installed which includes:
ADOBE DOCUMENT SERVICES 7.01 0006 SP006 ADOBE DOCUMENT SERVICES 7.00
BI BASE SERVICES 7.01 0006 SP006 BI BASE SERVICES 7.01
BI INFORM. BROADCASTING 7.01 0006 SP006 BI INFORM. BROADCASTING 7.00
BI META MODEL REPOSITORY 7.01 0006 SP006 BI META MODEL REPOSITORY 7.01
BI REPORTING AND PLANNING 7.01 0006 SP006 BI REPORTING AND PLANNING 7.01
BI UNIVERSAL DATA INTEGRATION 7.01 0006 SP006 BI UNIVERSAL DATA INTEGRATION BI UDI 7.01
BI WEB APPLICATIONS 7.01 0006 SP006 BI WEB APPLICATIONS 7.00
BI WEBDYNPRO ALV 7.01 0006 SP006 BI WEBDYNPRO ALV 7.01
BP ERP FIN MDM 1.40 0006 SP006 BP for Financial MDM 1.40
BP ERP HR EIC 1.40 0006 SP006 BP für HR Employee Interaction Center 1.40
BP ERP ICM ANALYST 1.41 0004 SP004 BP for ICM-Analyst 1.41
BP ERP RECRUITER 1.40 0006 SP006 BP for Recruiter 1.40
BP ERP RECRUITING ADMIN 1.40 0006 SP006 BP for E-Recruiting Administrator 1.40
BP ERP SITE TECHNICIAN 1.20 0006 SP006 BP for Site Technician (Telecommunications) 1.20
BP ERP UT XSS 1.40 0006 SP006 BP ERP UT Definition für Self Service BP 1.40
BP ERP05 BUS UNIT ANALYST 20 1.0 0017 SP017 BP for Business Unit Analyst (mySAP ERP) 1.0
BP ERP05 COMMON PARTS 1.41 0006 SP006 BP ERP05 COMMON PARTS 1.41
BP ERP05 ESS 1.41 0006 SP006 BP for Employee Self-Service 1.41
BP ERP05 HR ADMINISTRATOR 1.41 0006 SP006 BP for HR Administrator (mySAP ERP) 1.41
BP ERP05 MAINTENANCE TECH 1.2 0006 SP006 BP for Maintenance Technician 1.2
BP ERP05 MSS 1.41 0006 SP006 BP for Manager Self-Service 1.41
BP ERP05 PROJ SELF-SERV 1.0 0016 SP016 BP for Project Self-Service (mySAP ERP) 1.0
BP ERP05 SELF-SERV ADMIN 1.0 0017 SP017 BP for Self-Service Administrator (my SAP ERP) 1.0
BP ERP05 TALENT DEV 1.01 0010 SP010 BP for Talent Development Specialist 1.01
BP_PROJ_PORT_DESIGNCOLL 4.0 0015 SP015 BP for Project Portfolio Management and Design Collaboration 4.0
CAF EU 7.01 0006 SP006 SAP Net Weaver End User 7.01
DI BUILD TOOL 7.01 0000 SAP BUILD TOOL 7.01
DI CHANGE MANAGEMENT SERVER 7.01 0006 SP006 CHANGE MANAGEMENT SERVER and SXMAN 7.00 701
DI COMPONENT BUILD SERVER 7.01 0006 SP006 COMPONENT BUILD SERVER 7.01
DI DESIGN TIME REPOSITORY 7.01 0006 SP006 DESIGN TIME REPOSITORY 7.01
FORUMS 7.01 0005 SP005 FORUMS 7.01
J2EE ENGINE BASE TABLES 7.01 0006 SP006 BASETABLES
J2EE ENGINE CORE TOOLS 7.01 0006 SP006 CORE TOOLS J2EE ENGINE
JAVA LOG VIEWER 7.01 0006 SP006 SAP JAVA LOG VIEWER 7.01
JAVA SP MANAGER 7.01 0006 SP006 JAVA SP MANAGER 7.00
KMC BASE COMPONENTS 7.01 0006 SP006 KMC BASE COMPONENTS 7.01
KMC COLLABORATION 7.01 0006 SP006 KMC COLLABORATION 7.01
KMC CONTENT MANAGEMENT 7.01 0006 SP006 KMC CONTENT MANAGEMENT 7.01
KMC UI LAYER 7.01 0006 SP006 KMC UI LAYER 7.01
KMC WEB PAGE COMPOSER 7.01 0006 SP006 KMC WEB PAGE COMPOSER 7.01
LIFECYCLE MGMT PORTAL 7.01 0006 SP006 LIFECYCLE MGMT PORTAL 7.01
LIFECYCLE MGMT TOOLS 7.01 0006 SP006 LIFECYCLE MGMT TOOLS 7.01
MI ADMINISTRATION 7.01 0006 SP006 MI ADMINISTRATION 7.01
MI DRIVERS 7.01 0006 SP006 MI DRIVERS 7.00
MI WD LAPTOP 7.01 0006 SP006 Net Weaver Mobile Infrastructure Web Dynpro LAPTOP 7.00
PDK PORTAL SERVICES 7.01 0006 SP006 PDK PORTAL SERVICES 7.00
PORTAL CORE SERVICES 7.01 0006 SP006 EPBC 7.01
PORTAL FRAMEWORK 7.01 0006 SP006 EPBC2 7.01
PORTAL PLATFORM 7.01 0006 SP006 EP - Portal Server PORTAL 7.01
PORTAL WEB DYNPRO 7.01 0006 SP006 PORTAL WEB DYNPRO 7.01
RTC 7.01 0006 SP006 RTC 7.00
RTC-STREAM 7.01 0006 SP006 RTC-STREAM 7.00
SAP CAF 7.01 0006 SP006 SAP CAF 7.01
SAP CAF-KM 7.01 0006 SP006 SAP CAF-KM 7.01
SAP CAF-UM 7.01 0006 SP006 SAP CAF-UM 7.01
SAP CPS BASIC (SCHEDULER) 7.01 0004 SP004 Job scheduling capabilities of SAP NetWeaver 7.01
SAP ESS 603 0006 SP006 SAP ESS 603
SAP INTERNET KNOWLEDGE SERVLET 7.01 0006 SP006 SAP Internet Knowledge Servlet 7.00 (SAP J2EE IKS)
SAP J2EE ENGINE 7.01 0006 SP006 SAP J2EE Engine 7.01
SAP J2EE ENGINE CORE 7.01 0006 SP006 SAP J2EE ENGINE CORE 7.01
SAP JAVA TECHNOLOGY S OFFLINE 7.01 0006 SP006 SAP JAVA TECHNOLOGY S OFFLINE SAP TECH S OFFLINE 7.01
SAP JAVA TECHNOLOGY SERVICES 7.01 0006 SP006 SAP JAVA TECHNOLOGY SERVICES (Schicht 3 Dummy) SAP JAVA TECH SERVICES
SAP MI CLIENT 7.01 0006 SP006 SAP Mobile Infrastructure Client 7.0
SAP MSS 600 0017 SP017 SAP MSS 600 (Manager Self Services)
SAP PCUI_GP 603 0006 SP006 SAP PCUI_GP 603
SAP SOFTW. DELIV. MANAGER 7.01 0000 SAP JAVA SL 7.01
SOFTWARE LIFECYCLE MANAGEMENT 7.01 0006 SP006 SOFTWARE LIFECYCLE MANAGER 7.01
UME ADMINISTRATION 7.01 0006 SP006 UME ADMINISTRATION 7.01
UWL COLL PROCESS ENGINE 7.01 0006 SP006 UWL COLL PROCESS ENGINE 7.01
VISUAL COMPOSER BASE 7.01 0006 SP006 VISUAL COMPOSER BASE 7.00
VISUAL COMPOSER BI KITS 7.01 0006 SP006 VISUAL COMPOSER BI KITS 7.00
VISUAL COMPOSER FLEX 7.01 0006 SP006 VISUAL COMPOSER FLEX 7.00
VISUAL COMPOSER FRAMEWORK 7.01 0006 SP006 VISUAL COMPOSER FRAMEWORK 7.00
VISUAL COMPOSER GP KITS 7.01 0006 SP006 VISUAL COMPOSER GP KITS 7.00
VISUAL COMPOSER XX KITS 7.01 0006 SP006 VISUAL COMPOSER XX KITS 7.00
WEB DYNPRO EXTENSIONS 7.01 0006 SP006 WEB DYNPRO EXTENSIONS 7.01
I expect to see more than the 6 previously mentioned files available for download, also the option for EHP2 which I know is available, or am I wrong in expecting this.

Solution manager 7.1 installation in ECC 6.0 landscape

Dear All,
I am planning to install solman 7.1 SP04 in my landscape where the managed systems are running on ECC 6.0. SP 07(PRD, DEV,...).
Is it fine to start installation with current landscape or i need to upgrade the ECC version.
Any documents available regarding the technical system patch level requirements for Solution manager 7.1 installation.
Please suggest.

Hi Jithu,
Pls refer below links,
Solution Manager installation 7.1
SAP Solution Manager 7.1 – SAP Help Portal Page
Dia Agent Connect To system in solman 7.1 sp10
Regards
K.N

Solution Manager 4.0 Installation error on vmware

Hi guys,
I try to install the solution Manager 4.0 SR4 in a vmware server Win2003 64bit
and get the following error message in phase 17 (import ABAP)
Execution of the command "C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 2. Output:
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_17-b06, mixed mode)
Required system resources are missing or not available:
Import directory '
hyperv01\c$\SAPINSTALL\SAP SOLUTION MANAGER 7.0 Installation Export 1\EXP1' does not exist;
Import directory '
hyperv01\c$\SAPINSTALL\SAP SOLUTION MANAGER 7.0 Installation Export 1\EXP2' does not exist;
Import directory '
hyperv01\c$\SAPINSTALL\SAP SOLUTION MANAGER 7.0 Installation Export 2\EXP3' does not exist;
Import directory '
hyperv01\c$\SAPINSTALL\SAP SOLUTION MANAGER 7.0 Installation Export 2\EXP4' does not exist.
of course the path exists and the further dvd locations where also found?
is ther something wrong with the naming of the install dir?
must I have a character for the "harddrive"
Plse help
thank you and br
Wolfgang

Hello shareef,
there is no extra recommendation from SAP regarding SolMan on vmware.
SAP supports installations on vmware wheanwhile also for productive systems (plse check PAM).
The experience I have for my installation:
I works fine til now, no probs.
cu Wolfgang

Error during solution manager 3.2 installation.

Hi !
I am getting the error in solution manager 3.2 installation . I am doing installation using system copy / backup restore method .
Getting ther following error -
"CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: SP2-0310: unable to open file
"CONTROL.SQL"ORA-01012: not logged onORACLE instance started."
Kindly suggest the solution.
Regards-
sanjay

hi Markus!
The ora_sql_results.log file shows the following-
"2007-06-07, 18:32:21 SAPINST ORACLE start logging for
connect / as sysdba ;
CONNECT / AS SYSDBA
SHUTDOWN ABORT
@CONTROL.SQL
SHUTDOWN IMMEDIATE
STARTUP MOUNT
ALTER DATABASE ARCHIVELOG;
ALTER DATABASE OPEN;
EXIT
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.6.0 - Production on Thu Jun 7 18:32:21 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Connected.
ORACLE instance shut down.
SP2-0310: unable to open file "CONTROL.SQL"
ORA-01012: not logged on
ORACLE instance started.
Total System Global Area 546906764 bytes
Fixed Size               455308 bytes
Variable Size            293601280 bytes
Database Buffers       251658240 bytes
Redo Buffers              1191936 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
ALTER DATABASE ARCHIVELOG
ERROR at line 1:
ORA-01507: database not mounted
ALTER DATABASE OPEN
ERROR at line 1:
ORA-01507: database not mounted
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
SAPINST: End of output of SQL executing program E:\oracle\SMP\920/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2007-06-07, 18:32:28 SAPINST ORACLE stop logging"
What to follow... pls guide
Regards-
sanjay

Help about Solution Manager Maintanence Optimizer

Hi All,
I have a small confusion how to follow the configuration of Maintenance Optimizer in Solution manager.
Yesterday i installed the solution manager and assigned the ECC server to that solution manager using SMSY transaction.
Now i have to configure maintenance optimizer; what are the doubts i have:
1) I choose 001 client to configure; now i have to create any user with all roles or else can i use sap* ?
2) what are the roles i have to assign that new user?
3) Now what step i have to follow; it mean goto transaction SPRO and follow or any other configuration is required?
Please give me some suggestions...
Thanks & Regards,
Vivek N.

> 1) I choose 001 client to configure; now i have to create any user with all roles or else can i use sap* ?
just create user with profile SAP_ALL and sap_new
> 2) what are the roles i have to assign that new user?
give all authirisation sap_all
> 3) Now what step i have to follow; it mean goto transaction SPRO and follow or any other configuration is required?
check http://service.sap.com/solman-mopz and SAP Note: 1024932
Samrat

Solutions for Maintenance Optimizer via Tr. DSWP

Hi!
I have some simple question.
I have already installed Solution Manager and established all the steps for the Maintenance Optimizer.
I also created two systems via Tr. SMSY and have defined the logical components.
I also defined one solution via DSWP and would like to demonstrate that the maintenance functionality is working fine.
But I cannot see any systems, if I am clicking on "Maintenance Optimizer".
How can I do this step in order to show the maintenance optimizer functionality for some solution in the Tx. DSWP?
Thank you!
regards

Hi!
Thank you.
>Go to the solution settings and make right click over the system, select "put in solution"
Where can I find this issue or which TX. do you use?
The second problem is thet I cannot see some grafic elements if I am clicking ot the Servers (Tx. solution_directory) and I am getting the error "Could not initialize"
Thank you!
regards

Adding a system to Solution in Maintenance Optimizer

Dear All,
We have installed two NW systems. One is based upon NW 7.0 EHP 2 and the other is based on NW 7.4 SR1. On both of these, we intend to install Duet Enterprise 2.0 add-ons. I have been asked to calculate the SP stack for both NW releases. Based on my limited knowledge of Solution Manager, I have created a solution "Duet Enterprise" and added both systems info in SMSY (server, database etc.). Now, when I create a maintenance transaction in MOPZ, I am unable to see any system in product version in the operations tab as compared to another solution which shows a system SPR (please see attached screenshots).
Please advise the steps through which I can add a system so that it shows in the Duet Solution.
Greatly appreciate any help provided.
Kind regards,
Amer.

Hi Amer
Have you checked below links
Maintenance Optimizer - Solution Manager - SCN Wiki
Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
make sure you have lmdb entries properly reflected for these systems and above links gives more insights for mopz.
Thanks
Prakhar

Solution Manager 4.0 Installation Error

am doing the Solution Manager 40 installation on AIX as root.
FYI: We are using central SLD.
During the installation in phase 30 "check DDIC password"
Sapinst stops with the following error.
In sapinst.log the error is:
In the installation log it says ERROR 2006-09-01 16:53:47
FRF-00025 Unable to call function. Error message: Large time
difference between application server a .
INFO 2006-09-01 16:53:47
RFC connection closed.
In sapinst_dev.log the error is:
FCO-00011 The step runRUTTTYPSET with step key
|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_I
nstance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|1|0|runRUTTTYPSET
was executed with status ERROR .
I did tried retry,stopped exit out and stopsap and stared again.
Even I upgraded it to the latest kernel(75) and tried again but no luck.
I see the follwoing error in dev_w0:
A Large time difference between application server and database..
A
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13155]
A *** ERROR => zdate_gettime: Service for ABAP time in EMERGENCY
MODE. [zdate.c 1390].
Should I rollback to the old kernel which was 52, which came with
installation DVD's ?
The permissions of /usr/sap/trans and files and dir below is ok and owned by sidadm.
Does anyone has any idea ?
Thanks & Regards
Haq

Hi,
Could you please tell me what was the solution to this error. I am facing the similar issue.
Please help, thanks
Regards,
Nitin Nayyar

Solution Manager 4.0 Installation Error AIX 5.3 / Oracle 10.2.0.1

Hi All,
I am facing an error in the installation step of Solution Manager 4.0 on AIX 5.3 / Oracle 10.2.0.1
Hostname : INXXXXSAPIDES
The ABAP instance is not coming up and the Installation failed.I tried to bring up the instance manually.But was not successful.
Workprocess traces :
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x7000001732fa070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x7000001732fa470
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2176 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5720kb, dir_size: 5664kb.
A Attached to PXA (address 0x7000001e0000000, size 150000K)
A abap/pxa = shared unprotect gen_local
A PXA INITIALIZATION FINISHED
A -PXA--
A
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x0x113a1f5c0
=> Stack address = 0xfffffffffffded0
=> Stack low = 0xfffffffffffb5e0
=> Stack high = 0xffffffffffff810
=> Stack Trace:
 pthread_kill() at 0x900000000490650
 praise() at 0x900000000490070
 raise() at 0x900000000059624
 abort() at 0x900000000084a90
TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T0/M0 [thxxhead.c 10721]

DEV_DISP 
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Sat Jul 28 22:41:18 2007
ERROR => W0 (pid 442462) died [dpxxdisp.c 14319]
ERROR => W2 (pid 635048) died [dpxxdisp.c 14319]
ERROR => W3 (pid 598164) died [dpxxdisp.c 14319]
ERROR => W4 (pid 770084) died [dpxxdisp.c 14319]
ERROR => W5 (pid 815142) died [dpxxdisp.c 14319]
ERROR => W6 (pid 761862) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W7 (pid 671804) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbd --> 0xb9
ERROR => W8 (pid 630958) died [dpxxdisp.c 14319]
ERROR => W9 (pid 622786) died [dpxxdisp.c 14319]
ERROR => W10 (pid 549070) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb9 --> 0xb1
ERROR => W11 (pid 544802) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb1 --> 0xa1
ERROR => W12 (pid 508062) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xa1 --> 0x81
Sat Jul 28 22:41:55 2007
ERROR => W1 (pid 802934) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
stderr1
Command: dw.sapSM4_DVEBMGS10
 pf=/usr/sap/SM4/SYS/profile/SM4_DVEBMGS10_INSISCSAPIDES
ICM up and operational (pid: 675892) ***
timezone value meaningless. BSD libraries linked?
work process W1 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W2 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W12 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
.timezone value meaningless. BSD libraries linked?
work process W4 died => ThSigHandler: signal
work process W8 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
Can someone please help me in this.
Thanks
Siva
Message was edited by:
 siva sakthi

I found the solution..
There was a a problem in the timezone setting for the server.After changing it and rebooting it worked perfectely.

Solution Manager 4.0(Installation)

Hallo Everyone,
I'am trying for about four hours to install Solution Manager 4.0.
Without any progess.
I only reach Step 2 "Define Parameters, Media Browser > Software package"
At the End, I got this error and the Installation was aborded.
ERROR      2007-04-16 17:57:48 [iaxxinscbk.cpp:271]
           abortInstallation
CJS-00030 Assertion failed: in NW_ABAP_Import_Dialog.dialogPreconditions: Import directory 'D:\EXP1' must exist
ERROR      2007-04-16 17:57:48
           CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR      2007-04-16 17:57:48
FCO-00011 The step dialogPreconditions with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|dialogPreconditions was executed with status ERROR .
INFO       2007-04-16 17:58:08 [iaxxgenimp.cpp:779]
           showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|dialogPreconditions".
Exit status of child: 1
P.s. The installation is on a Virtual Machine(VMware) and the JDK is "j2sdk1.4.2_14"
Thanks for everyone's help,
Kais

Hi Kais,
Installation on VMWare instance is a little unstable as I too faced a lot of issues similar to that. To solve your issue, please do copy all the installation media to the local VMWare instance itself and then start the installation, it will go through. Moreoever, to be on the safer side, do install JDK 1.4.2_09 or 10. Coz I faced issues when I tried with 1.4.2_12 and 13.
Hope this would help. Please do revert if you would require further help.
Regards,
P. Kumaravel.
Ps: Award points for helpful answers.

Error in Solution Manager 4.0 Installation

When installing Solution Manager 4.0 on Windows server 2003 with Oracle 10g, Installation
failed at Import ABAP.
The Error message is :-
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log
file(s) import_monitor.java.log, import_monitor.log.
import_monitor.java.log
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 5, completed 12, failed 0, total 18.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 5, completed 12, failed 1, total 18.
Import Monitor jobs: running 1, waiting 4, completed 12, failed 1, total 18.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 12, failed 2, total 18.
Import Monitor jobs: running 1, waiting 3, completed 12, failed 2, total 18.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 0, waiting 3, completed 12, failed 3, total 18.
Import Monitor jobs: running 1, waiting 2, completed 12, failed 3, total 18.
Loading of 'SAPSDOCU' import package: ERROR
import_monitor.log
WARNING: 2006-07-27 09:47:26
Cannot start import of packages with views because not all import packages with tables are
loaded successfully.
WARNING: 2006-07-27 09:47:26
4 error(s) during processing of packages.
INFO: 2006-07-27 09:47:26
Import Monitor is stopped.
The Java version we are using is - j2sdk-1_4_2_12-windows-i586-p
Any guidance will be appreciated
Thanks
Gireesh

ganesh if solved ur problem plz help me
my solman 4 running since 3 days at import abap 16 phase of 42.
plz help me
following error in log
INFO: 2007-04-19 20:36:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is successfully completed.
INFO: 2007-04-19 21:40:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
WARNING: 2007-04-19 21:40:22
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2007-04-19 21:40:22
1 error(s) during processing of packages.
INFO: 2007-04-19 21:40:22
Import Monitor is stopped.
and
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Returncode of C:\j2sdk1.4.2_12\bin\jar.exe: 0
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Jar file local_policy.jar is not included in zip file F:\sldprofile.zip, returning false
TRACE [iaxxdlghnd.cpp:657]
CDialogHandler::doHandleDoc()

Error in Solution Manager 4.0 Installation u0096 Step 32 Create JAVE users

Hi All,
I am installing Solution Manager 4.0 on WIN server 2003 & Oracle10g. The installation has been successful so far but at Step 32 (Create JAVA users) the installation errors and the error log is as follows:
ERROR 2016-09-10 06:39:28
CJS-30197 . For more details see output of logfile:
ERROR 2016-09-10 06:39:28
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
Critical Error
Launching program failed
-> Invalid JDK (rc = -17)
Entries in the log file (UserCheck.log)
Critical Error
Launching program failed
-> Invalid JDK (rc = -17)
The Java version Im using is - j2re1.4.2_12 windows.
Any guidance will be appreciated
Thanks
Frank

Dear all
use j2re1.4.2_16 windows.
case1-if sapjsf user not craeted login to 001 clint with sap* delete
case2- if sapjsf user not craete a sapjsf user createand then delete
agin proceed
i am trouble this problem within week
but at last complte of the installation
thanks
regards
venkat

Oracle Errors while Solution Manager 4.0 installation on linux

While installing Oracle 10g instance for Solution Manager 4.0, The following popup message displayed. I checked the log file and not much information. Please tell me what shall I need to do.
Error message:
Error in invoking target 'ntcontab.o' of make file '/oracle/<sid>/102_32/network/lib/ins_net_client.mk'
see '/oracle/orainventory/logs/installActions2006-10-08_06-39-02PM.log' for details
Thanks in advance
Regards
Srinivas

Hello, have some one solved the problem ? I have the same problem on SLES9. I have fond note #499055. There are something about relinking files during Oracle installation on Linux. Please give an information did You soled a problem.
Best Regards
Marcin Sobolewski

Solution Manage Maintenance Optimizer Installation

Similar Messages

Maybe you are looking for