Solution Manager 4.0 and SAP R3 4.7E - Business Process Repository Question

When I am in solution manager setting up my business processes (solar01) to select my logical component with the drop-down I do not see my SAP R3 ERP 4.7 system available for selection. They do exist in my SLD (SMSY) and all the components with the 4.7 system. Does anyone know why they are not showing up in the drop-down for business process repository selection help?
Thanks
Skip Ford

Hi,
For how long the installation process has been running. Check the following.
1. The virtual memory page size that you have assigned.
2. The hard disk free space.
3. The Virtual memory should be optimized size, should not be larger than the free space available.
These are performance optimization settings.
I guess the installation would take around ten hours, I am not sure.
But one thing is sure <b>SAP</b> is not that bad to get aborted abruptly.
Keep Patience while installing. Before that take care that your system satisfies, requirements.
Hope I was clear. Feel free to get back, incase you face any problem.
--Thanks and Regards,
Ragu
ERP,
Suzlon Energy Limted, Pune
Extn: 2638
+919370675797
I have no limits for others sky is only a reason

Similar Messages

Solution Manager users consume a SAP Licence

Hello
I've been working with customers with Solution Manager and I got a very extrange question. A company has got a restriction about the numbers of users that can be created in Solution Manager. They were said that only users which have a SAP productive licence (ERP/CRM/SRM, etc.) are allowed to use Solution Manager. So, they deleted all users which do not have a productive user. So all the consultants now cannot use SolMan for the projects.
In my view, this totally wrong, since you want to have all your support team, and consultants working in projects, using Solution Manager as fundamental tool, an for sure, most of them will NOT have user in the productive system.
Do you have any clear statement somewhere in the Enterprise Support contract or somewhere else which clearly state that users in SolMan need to have a productive licence? Is there any note, mail from SAP that say so?
I appreciate your input.
Regards
Esteban Hartzstein
TeByon Consulting
Director

Hello,
I got an answer from some very knowledgeable person at SAP, responsible for Solution Manager:
Hi Everyone:
The SAP Solution Manager is covered under the customeru2019s support agreement, so normally we have the customers address this with their account team if they have any questions. There is more information in the solution manager homepage FAQ. Note that all use of SAP Solution Manager is u201Ccoveredu201D by the customer agreement, including users. The only exception is use of Service Desk for non-SAP components, in this case the account team can inquire if any additional licenses are required.
Back to Top
2. What is the cost of installing SAP Solution Manager?
The following items regarding SAP Solution Manager are covered:
The SAP Solution Manager Software.
The license for SAP Solution Manager Standard Edition.
The license for MaxDB (formerly known as SAP DB). If customers choose to use a different database, database license costs may apply depending on the customer's agreement with his database vendor.
Back to Top
3. Which licenses do customers need for SAP Solution Manager?
To run SAP Solution Manager, customers need the following licenses:
SAP Solution Manager
Database - The license for SAP DB is covered by the SAP maintenance agreement. If customers choose to use a different database, database license costs may apply depending on the customer's agreement with their database vendor.

How the solution manager is realated to SAP BW

Hi experts!
Well!! I have been given a task to work on solution manager 4.0 and make it useful for SAP BI.
so I have a few questions.
1) Does basis person look after the config and authorizations?
2) I have been told to include the system change request ( SCR), Help desk issues into the solution manager... so how can I get that.
3) where my role starts exactly, I mean after connecting SAP BI to Solution manager,I guess this is done by BASIS person.
Points will be rewarded to the helpful replies... thanks in advance.

Hi Abass,
To answer few of ur questions,
2) you need to configure the Solution manager tool with the BI system when a ticket is raised or a change is triggered. These things will be monitored by a help desk or service desk person or a BI expersie person.
I guess your role is to implement this in ur org that means you need to create from basics such as creating business partners etc
Regards
Srini

Which ver of J2SDK for Solution Manager 7.0 including SAP EHP1 on win:orc

Dear all,
I am in planing to install process to install
SAP Solution Manager 7.0 including SAP Enhancement Package 1 on Windows : Oracle
Which version J2SDK file is more recommended. what sap notes i have to refer to.
regards,
rahul

Hi
Check this out
Note 716604 - Access to Sun J2SE and recommended J2SE options
http://java.sun.com/products/archive/j2se/1.4.2_09/index.html
http://java.sun.com/j2se/1.4.2/SAPsite/download.html
Note 575774 - Installing new JDK
All in one
http://java.sun.com/products/archive/
Note 1172419 - Linux: Supported Java versions on the x86_64 platform
Regards
Uday

Ticket SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0

Hi,
I want to migrate all tickets from SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0 , please let me know the procedure how to migrate it.
DB Detail
SAP Solution Manager 7.0 - MSSQL( 9.00.4035)
SAP EHP 1 for SAP Solution Manager 7.0 - MSSQL(10.00.2531)
Thanks,
Kaleel

Dear Mohamed,
I was reading the post and the replies and while I think your question has been answered, I just want to make sure what you are trying to achieve. Is it a migration, where you have one Solution Manager system on SAP Solution Manager 7.0 and another
SAP Solution Manager EHP1 system and you were looking to migrate the Service Desk messages?
If you are "Upgrading" one system from Solution Manager 7.0 to EHP1 then all the messages are preserved.
If you are "Migrating" to a physically different system, then transfer of Service Desk Messages is not supported.
Please see the document [SAP Solution Manger- Conent Transfer|https://websmp204.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000608232009E]
Also Service Desk is a completely independent CRM Service, so the messages could always be archived, as has been suggested.
No depending on your scenario, is the EHP1 system brand new or is it already productive? If it was brand new, you might be able to do a homogenous system copy, and then upgrade the new system to EHP1. But if it is already productive, this would not be an option.
Hope this helps to clarify.
Regards,
Paul

How to downloadin Business Process Repository in Solution Manager?

Hello,
Does anybody know how to download whole Business Process Repository from solution manager?
I know how to download BPR, that are related to project, to excel file, but I want to download all the scenarios,processes are inbuilt to the Solution Manager business blueprint.
Can anybody help me?
Thanks,
Mahantesh

Hello Mahantesh,
I suppose that your idea behind this question is that you would like to browse the contents of the BPR. For this specific pupose, SAP will deliver a new web dynpro application with SAP Solution Manager 4.0 SP 12 and the respective stack coming out mid June 2007 which allows you to browse all BPR contents in your SAP Solution Manager system. So you no longer have to create a seperate project and select the contents via F4 value help in SOLAR01 in order to access the contents.
For further updates, please check the news mid June:
<a href="http://service.sap.com/solutionmanager">http://service.sap.com/solutionmanager</a>
Media Library -> Technical Papers. It will probably be called: "4.0 Support Package Stack <latest stack> [probably stack 12]"
However, please note that an individual download of the entire or partial BPR structures into MS Excel will not be possible.
Best regards,
Doreen Baseler

What is a Business Process Repository and where do we get it in SAP?

Hi,
What is a Business Process Repository and where do we get it in SAP?

Hi,
Here is an another way to look at the BPR-Business Process Repository delivered by SAP.
1. Add the Web Dynpro application Business Process Repository (BPR) to your Favorites:
2. Choose Favorites Add Other Objects Web Dynpro Application in the SAP initial screen.
3. Enter SM_BPR_OVERVIEW in the field Web Dynpro Application.
4. Enter a description like ex. SAP BPR
5. Save your changes.
6. Now Call the saved - Web Dynpro application SM_BPR_OVERVIEW
7. You can see the BPR in a new browser window.
This info is available in SAP Help on Solution Manager.
Hope this helps.
Kathir

Business Process Repository Server and Business Process Publisher

Hello,
How to install "Business Process Repository Server" and "Business Process Publisher"?
Tanks
Daniela

Hi,
Both business publisher and process repository are available in CD2 of BPA Suite complete (for windows OS).
Important step before installing the business process repository is that you must have installed the database. Or else you must have installed BPA with OracleLite or XE database. At the time Business process repository installation you need to choose the database option 1 if Oracle enterprise data base is installed, else you may choose option 2 which says you already have BPA installed with database.
regards,

FREE SAP Solution Manager Simulations, eBooks and Presentations

Learning on Demand by SAP ([LoD|https://lod.sdn.sap.com/]) has recently been updated with approximately 100 FREE Simulations and eBooks, some of which relate to SAP Solution Manager. SAP Simulations and eBooks are a convenient way of obtaining SAP training on new topics or updating your existing knowledge on new product releases.
Examples of the free Solution Manager elearning resources available on LoD include:
- SAP Solution Manager Use Cases
- Global Roll-out
- Sizing SAP Solution Manager
Click [FREE SAP elearning content|https://cart.lod.sdn.sap.com/pages/FreeContent/lod_free_courses.htm] to review the new elearning content and start Learning Now!

Hi Shane,
Thanx for sharing the information.
Regards
Spree

Solution manager 7.0 and Non-SAP Sys. for managing whole IT infrastructure

Hello Gurus,
ive tried to search the allmighty google and SDN network for an answer how can we use the SolMan 7.0 for external applications (non-SAP).
What is our concern is that basically the Sol Man is described for using with whole SAP product environment. project management, chagne management, support, updating and etc.
My idea is:
Can we use SolMan for describing our whole IT projects and processes?
What i mean is if for example we have a payroll system which is running in non-SAP environment, can we describe the project for it? track the changes to it? document everything and etc. Its like to use the SolMan for whole IT infrastructure no matter if the application is SAP or non-SAP environment.
Best regards
Laurynas Prikockis
Edited by: Laurynas Prikockis on Aug 18, 2010 6:50 AM

Hello there,
SAP Solution Manager contains some functionality to work with non SAP products. For example, in transaction SMSY (system landscape) you can define non SAP products and therefore non SAP systems, although the functionatlity that you get thus is somewhat limited (no automatic refresh, no logon from RFC destination, etc).
The same applies for the project (SOLAR_PROJECT_ADMIN) part of Solution Manager. It is possible to assign a logical component for a non SAP product to a project, then in the project it is possible to describe the process and document it but it will not be possible to use the more SAP oriented functionality like links to IMG projects, etc.
Best regards,
Miguel Ariñ

Solution Manager 4.0 and SLD automatic population

Our Solution Manager 4.0 installation was failing repeatedly while importing the CIM objects into the SLD. So here is what we did:
1.During installation we pointed the Solution Manager data supplier to the production SLD. The production SLD is on 640 wheras this is on 700.
2.After installation we created the Solution Manager (Admin) SLD by creating all necessary roles, groups, users and started importing the CIM and the delta.
3.We setup the data supplier of the production SLD to populate the Solution Manager (Admin) SLD. It looks like it is not getting populated and we got the following error in the production SLD:
#73 01/09/2007 12:39:15.173 [Thread-124] WARNING com.sap.lcr.sagent.BuilderDirector: Warning: SLD target system http://host:50100/sld sld/active not available (incoming data will be ignored).
Thrown:
com.sap.lcr.api.cimclient.CIMClientException: Received response is not a CIM Operation Response! Check "http://host:50100/sld" is the correct URL for the SLD CIM Object Manager and that user "user" has access to the SLD via http.
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:434)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:581)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:195)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:147)
at com.sap.lcr.api.cimclient.CIMOMClient.getCIMClass(CIMOMClient.java:538)
at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1185)
at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1196)
at com.sap.lcr.api.cimclient.CIMClient.ping(CIMClient.java:290)
at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:621)
at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:545)
at com.sap.lcr.sagent.BuilderDirector.run(BuilderDirector.java:459)
But this is the URL we use to go to the Solution Manager SLD!!! and the user is also correct.
1.I want to setup a way where the Solution Manager (Admin) SLD is populated from the production SLD every so often thru SMSY_SETUP -> Expert Settings -> Write back into SLD.
2.I want to use this Solution Manager (SLD) as the Admin SLD for NWA.
3.How do I know that the Object Manager of is up/down in the Solution Manager(SLD) and maybe restart it, while I can see that the SLD server is up.
3.I Manually setup some of the technical systems in the Solution Manager SLD by logging onto it http://host:port/sld, but I cannot see those in System Landscape in Solution Manager.
Can somebody please tell me how I can proceed from here.
A quick response would be appreciated with points.

Hi, we have server AIX and ORACLE for SAP BI7, we have SP12 in ABAP area and SP9 in J2EE area.
So i need same SPs in ABAP and JAVA for multiples notes recomending that, and fix the GIS Maps in Web.
So BASIS sayme SM is not compatible by Hardware, i not understand.
We only need Solution for download SP13 and packages the Java Stack.
Some guide for check Harware Requeriments the SM ?
Exist some new update to ASAP for BI, looking the new versions ?

Solution Manager 4.0 and Program Implementation

We are implementing an SAP Program over few years and intend to use SolMan 4.0. Can you please provide advice how to implement our scenario.
We have an SAP Program that consists of many projects. At the Program level we have a lot of common activities and documentation [e.g. Program Charter, Macro Blueprint (explained below) Change Management, Communication plan...]. Some of the projects have started in parallel, while others will follow,
All of the projects will share the information at the Program level.
What would be the right approach to implement such an SAP Program in SolMan?
Thank you.
In Macro Blueprint, we are looking at our business processes and links between them at a high level for several core areas (involving FI/CO, PS, HR, CRM...). After this exercise we will be doing Blueprint phases for individual projects.

Hi, we have server AIX and ORACLE for SAP BI7, we have SP12 in ABAP area and SP9 in J2EE area.
So i need same SPs in ABAP and JAVA for multiples notes recomending that, and fix the GIS Maps in Web.
So BASIS sayme SM is not compatible by Hardware, i not understand.
We only need Solution for download SP13 and packages the Java Stack.
Some guide for check Harware Requeriments the SM ?
Exist some new update to ASAP for BI, looking the new versions ?

Solution Manager - Logical Component for SAP Netweaver EHP2

Hello,
I installed the newest SAP Netweaver Ehp2 (with usage type AS ABAP only) for a future integrating with BI_CONT (SAP BI requirement). So... what I want to know is... I want to do an update of support packages to the latest Stack (SPS) and in this product version (NW EHP2) the latest stack is stack 06 !! But I ´m facing with a problem which is, because I have to maintain this system in Solution Manager (for Maintenance Optimizer activity)...so what I want is configure this new system on Solution Manager Ehp1 (with SPS 23) but in tcode SMSY I didn´t found this Product in Logical Components for I can apply this system to my Solution... I only see SAP Netweaver with EHP1 and not with EHP2 which is the version that I want to apply this new system. (This is mandatory task, because without it, I will not be able to download the support packages for NW 7.0 EHP2)
Tell me two things... first if this level version of Solution Manager that I have here (SPS 23) have this product in logical components, and two... if not it, is necessary to raise the level of Solution Manager support packages (to latest stack SPS 25) for I can see that logical component SAP Netweaver EHP2?!
Thank you very much
João Dimas - Portugal

Hi João,
You can verify if the EHP2 is available (if) in your system, this can be done once you are in SMSY -> Product Definitions -> SAP Netweaver where you should able to see the EHP2. If so, then it's a matter of marking the leading Product & Product Version under the Header Data ->Change Product Assignment where you can use the drop down arrow to select the Product and Product Version. If it's not available, then by checking the 'Free Product / Select Product Version' then use the drop down arrow to select the product & Product Version, once you selected that then click on copy and mark that as active and save.
Then you need to create a new logical component in System Group & logical Component under SAP Netweaver, then assign the system to the logical component. Once this is done you can use the logical component in a solution and create a maintenance transaction.
I hope this help you to proceed further, thanks.
Jay Soma.

Solution Manager as CEN and PI 7.1

Hi,
We have a PI 7.1 sytem that has a Message-Based Monitoring that is configured LOCALLY via Runtime Workbench -> Alert configuration (explained here : https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e05ad5a6-4b4f-2b10-df94-9b9e0392d306).
Also we have Solution Manager 4.0 SPS17 and is configured and a Central monitoring system (CEN). Soon, we are going to configure the ALM in the solution manager.
However, I need to know how the Message-Based Monitoring integrated the ALM mechanism of the CEN system ? did anyone implement it ? moreover, can we configure the Message-Based Monitoring via the solution manager to prevent any configuration being done locally ?
Please advice,
Dimitry Haritonov

You can also setup an Alert Management (ALM) either on Solution Manager or any Netweaver based system. ALM allows you control alerts more narrowly. You could have a rule for that specific system where no alerts are sent given a specific time window.
It's great for setting rules that say - send an email when XX system has an issue during these hours. Then after work or during the night shift, send an SMS text instead of an email. ALM is very powerful and can be used by all SAP solutions - ERP, SCM, Solution Manager, Portal - etc etc. It's basically a rules based system for routing alerts. Also allows you to do escalations and force people to confirm alerts when they have acknowledged them.
Hope this gives you another option.

Difference between Solution manager 3.2 and 4.0

Hi
Can anyone tell me about the solution manager functionalty differences between 3.2 version and 4.0 version
points will be rewarded
Dinaker vikas
Edited by: Dinaker Vikas Kommugury on Mar 26, 2008 12:16 PM

Hi Dinaker,
I have attached two helpful link below there you can assist your self .
http://www.saptechies.org/release-notes-sap-solution-manager-32/
http://www.saptechies.org/release-notes-sap-solution-manager-40/
thankssss

Solution Manager 4.0 and SAP R3 4.7E - Business Process Repository Question

Similar Messages

Maybe you are looking for