Solution Manager 4.0- Kernel Upgrade(disp+work stops)
Hi,
While doing Kernel Upgrade for Solution manger 4.0 , the disp+work stops.
I have taken the Packs as per my requisite for Windows server X64 bit - Unicode
The files that were taken are :
SAPEXEDB_102-20001356.SAR
SAPEXE_102-20001354.SAR
The services were stopped,the sap was stopped and the exe backup was taken.
Now after uncar of the SAR files,and while starting the services and SAP, the disp+work stops.
The trace file of disp+work has been shown below:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid CPS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 102
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 756
Fri Aug 10 11:14:07 2007
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 756) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 102 successfully loaded
shared lib "dw_xtc.dll" version 102 successfully loaded
shared lib "dw_stl.dll" version 102 successfully loaded
shared lib "dw_gui.dll" version 102 successfully loaded
shared lib "dw_mdm.dll" version 102 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Aug 10 11:14:11 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >solmgr_CPS_00 <
DpShMCreate: sizeof(wp_adm) 19136 (1472)
DpShMCreate: sizeof(tm_adm) 5584592 (27784)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1848)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F320050, size: 6274496)
DpShMCreate: allocated sys_adm at 000000000F320050
DpShMCreate: allocated wp_adm at 000000000F321F40
DpShMCreate: allocated tm_adm_list at 000000000F326A00
DpShMCreate: allocated tm_adm at 000000000F326A60
DpShMCreate: allocated wp_ca_adm at 000000000F87A130
DpShMCreate: allocated appc_ca_adm at 000000000F87FEF0
DpShMCreate: allocated comm_adm at 000000000F881E30
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F908AC0
DpShMCreate: allocated gw_adm at 000000000F908B40
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F908B70
DpShMCreate: allocated wall_adm at 000000000F908B80
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Aug 10 11:14:12 2007
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1904
argv[0] = D:\usr\sap\CPS\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\CPS\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\CPS\SYS\profile\CPS_DVEBMGS00_solmgr
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1061
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CPS
argv[7] = -DSAPMYNAME=solmgr_CPS_00
argv[8] = -DSAPPROFILE=D:\usr\sap\CPS\SYS\profile\CPS_DVEBMGS00_solmgr
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1626]
***LOG Q0K=> DpMsAttach, mscon ( solmgr) [dpxxdisp.c 11664]
DpStartStopMsg: send start message (myname is >solmgr_CPS_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Aug 10 11:14:13 2007
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Fri Aug 10 11:14:16 2007
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 384
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1067) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1904)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Aug 10 11:14:52 2007
ERROR => W0 (pid 1548) died [dpxxdisp.c 14319]
ERROR => W1 (pid 1516) died [dpxxdisp.c 14319]
ERROR => W2 (pid 1944) died [dpxxdisp.c 14319]
ERROR => W3 (pid 1496) died [dpxxdisp.c 14319]
ERROR => W4 (pid 1968) died [dpxxdisp.c 14319]
ERROR => W5 (pid 1964) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1980) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2560) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2548) died [dpxxdisp.c 14319]
ERROR => W9 (pid 3052) died [dpxxdisp.c 14319]
ERROR => W10 (pid 1808) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 980) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 1792) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:02 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Aug 10 05:45:02 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1548 Ended no 1 0 0
1 DIA 1516 Ended no 1 0 0
2 DIA 1944 Ended no 1 0 0
3 DIA 1496 Ended no 1 0 0
4 DIA 1968 Ended no 1 0 0
5 DIA 1964 Ended no 1 0 0
6 UPD 1980 Ended no 1 0 0
7 ENQ 2560 Ended no 1 0 0
8 BTC 2548 Ended no 1 0 0
9 BTC 3052 Ended no 1 0 0
10 BTC 1808 Ended no 1 0 0
11 SPO 980 Ended no 1 0 0
12 UP2 1792 Ended no 1 0 0
Dispatcher Queue Statistics Fri Aug 10 05:45:02 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Fri Aug 10 05:45:02 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Aug 10 05:45:02 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:07 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >solmgr_CPS_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1404) (SOFT_KILL)
Stop icman
killing process (848) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1404 HANDLE:488)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1404 HANDLE:488)
wait for end of icman
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:13 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:14 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:15 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:16 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:17 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:18 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:19 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:848 HANDLE:496)
[DpProcDied] Process died (PID:1904 HANDLE:472)
DpStartStopMsg: send stop message (myname is >solmgr_CPS_00 <)
NiIMyHostName: hostname = 'solmgr'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Fri Aug 10 11:15:20 2007
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11977]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 416 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 416 (pos=3)
SiSelNRemove: removed sock 416
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 416
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 756) [dpxxdisp.c 10334]
Good Bye .....
Could you please help me in resolving this issue ?...
Regards,
Radeesh V
Hi,
Below is the trace file of dev_ms
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2416] Sat Aug 11 15:23:23 2007
[Thr 2416] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 73
intno 20050900
make: multithreaded, Unicode, optimized
pid 1252
[Thr 2416] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 1252) [msxxserv.c 1824]
[Thr 2416] load acl file = D:\usr\sap\CPS\SYS\global\ms_acl_info.DAT
[Thr 2416] MsGetOwnIpAddr: my host addresses are :
[Thr 2416] 1 : [172.16.82.227] SOLMGR (HOSTNAME)
[Thr 2416] 2 : [127.0.0.1] solmgr (LOCALHOST)
[Thr 2416] Sat Aug 11 15:23:24 2007
[Thr 2416] MsHttpInit: full qualified hostname = solmgr
[Thr 2416] HTTP logging is switch off
[Thr 2416] set HTTP state to LISTEN
[Thr 2416] ms/icf_info_server : deleted
[Thr 2416] *** I listen to port sapmsCPS (3600) ***
[Thr 2416] *** I listen to internal port 3900 (3900) ***
[Thr 2416] *** HTTP port 8100 state LISTEN ***
[Thr 2416] CUSTOMER KEY: >C1198656006<
[Thr 2416] Sat Aug 11 15:23:51 2007
[Thr 2416] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
[Thr 2416] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
Similar Messages
-
Shadow instance disp+work stopped during PREPARE_JSPM_QUEUE
Hi Gurus,
I have started an upgrade EHP3 on ERP 6.0 using Ehpi tool. During the phase PREPARE_JSPM_QUEUE the tool starts the shadow instance and then disp+work stopped after a minute.
dbs_ora_schema is setup with SAPSR3.
whatever if the main instance is runing or not.
Here the dev_wo file:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Sep 03 01:04:10 2009
B create_con (con_name=R/3)
B Loading DB library 'C:\TEST\Download\EHPI\abap\exe\dboraslib.dll' ...
B Library 'C:\TEST\Download\EHPI\abap\exe\dboraslib.dll' loaded
B Version of 'C:\TEST\Download\EHPI\abap\exe\dboraslib.dll' is "700.08", patchlevel (0.201)
B New connection 0 created
M sysno 08
M sid MPI
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 201
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 5836
M
M kernel runs with dp version 242(ext=110) (@(#) DPLIB-INT-VERSION-242)
M length of sys_adm_ext is 364 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5836) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Thu Sep 03 01:04:11 2009
M DpShMCreate: sizeof(wp_adm) 13472 (1224)
M DpShMCreate: sizeof(tm_adm) 5283968 (26288)
M DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1616)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000FE40050, size: 5943632)
M DpShMCreate: allocated sys_adm at 000000000FE40050
M DpShMCreate: allocated wp_adm at 000000000FE41D00
M DpShMCreate: allocated tm_adm_list at 000000000FE451A0
M DpShMCreate: allocated tm_adm at 000000000FE45200
M DpShMCreate: allocated wp_ca_adm at 000000001034F280
M DpShMCreate: allocated appc_ca_adm at 0000000010353900
M DpShMCreate: allocated comm_adm at 0000000010355070
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 00000000103DBCF0
M DpShMCreate: allocated gw_adm at 00000000103DBD70
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 00000000103DBDA0
M DpShMCreate: allocated wall_adm at 00000000103DBDB0
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: running on host mpi-server
M
M Thu Sep 03 01:04:12 2009
M calling db_connect ...
C Prepending F:\oracle\product\10.2.0\db_1 to Path.
C Oracle Client Version: '10.2.0.4.0'
C application info callback registered
C Client NLS setting (OCINlsGetInfo): connection handle 0 -> 'AMERICAN_AMERICA.WE8DEC'
C Logon as OPS$-user to get SAPSR3SHD's password
C Connecting as /@MPI on connection 0 (nls_hdl 0) ... (dbsl 700 270309)
C Nls CharacterSet NationalCharSet EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 0000000009895CB0 000000000989DEE0 00000000098A1028
C Attaching to DB Server MPI (con_hdl=0,svchp=00000000098A0EE8,srvhp=00000000098A32F8)
C Starting user session: OCISessionBegin(con_hdl=0, usr='/',svchp=00000000098A0EE8, srvhp=00000000098A32F8, usrhp=00000000142BA8A0)
C CbApplInfoGet() failed (ignored 1).
C Now '/@MPI' is connected: con_hdl=0, nls_hdl=0, session_id=130.
C Got SAPSR3SHD's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=00000000098A0EE8,usrhp=00000000142BA8A0)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3SHD/<pwd>@MPI on connection 0 (nls_hdl 0) ... (dbsl 700 270309)
C Nls CharacterSet NationalCharSet EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 0000000009895CB0 000000000989DEE0 00000000098A1028
C Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3SHD/<pwd>, svchp=00000000098A0EE8, srvhp=00000000098A32F8, usrhp=00000000142BA8A0)
C Now 'SAPSR3SHD/<pwd>@MPI' is connected: con_hdl=0, nls_hdl=0, session_id=130.
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C DB instance MPI is running on MPI-SERVER with ORACLE version 10.2.0.4.0 since SEP 02, 2009, 23:52:22
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090903 010412 MPI-SERVER
C build_stmt: reallocating stmt buffer: 256 -> 2000 characters
C OCIStmtExecute() failed with -1=OCI_ERROR
C SQL error 942:
*B **LOG BZA=> table SVERS does not exist on database [dblink#7 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1451]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10561]
M
M Info for wp 0
M
M pid = 5836
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server mpi-server_MPI_08 on host mpi-server (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Sep 03 01:04:12 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10781
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5836) [dpnttool.c 333]> M make: multithreaded, ASCII, 64 bit, optimized
Just as additional information: Java systems connected to Non-Unicode ABAP systems is not supported:
Note 975768 - Deprecation of Java features with non-Unicode Backend
Consider migrating to Unicode to run a supported environment!
> C Prepending F:\oracle\product\10.2.0\db_1 to Path.
So you installed the database software using setup.exe instead of the "sapserver.cmd" file
> C SQL error 942:
> *B **LOG BZA=> table SVERS does not exist on database [dblink#7 @ 1299] [dblink 1299 ]
Check the ORA-00942 section in
Note 400241 - Problems with ops$ or sapr3 connect to Oracle
Markus -
Reg :SAP WEBDISPATCHER- disp+work stopped(turned from yellow to ash color)
Hi Experts,
When I started the SAP Instance , disp+work stopped in SAP MMC console.Hence I am not able to login to the SAP system(the error : sapdp00 broken).Database is MaxDB.Before adding DATA Volume,the server was working fine.Since the data area was full , I added a new volume and restarted the SAP server.From then on the error persist!..After starting SAP Instance,I also deleted the contents of dev_disp and dev_w0 file but faced the same error.I also executed the command load_systab for loading the system tables but then also the same error.
While starting SAP Instance I get the message as 'Database not available via R3trans'.
While executing the command R3trans -x or R3Trans -d: I get the following message::
This is R3trans version 6.19 (release 711 - 22.01.09 - 11:27:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"
R3trans finished (0012).
Please help to resolve the issue.Hi Siva,
Below are details of trans.log::
4 ETW000 R3trans version 6.19 (release 711 - 22.01.09 - 11:27:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 12.01.2012 - 12:21:46
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu Jan 12 12:21:46 2012 81 0.000081
4 ETW000 [dev trc ,00000] db_con_init called 21 0.000102
4 ETW000 [dev trc ,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 39 0.000141
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 23 0.000164
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so' ...
4 ETW000 37 0.000201
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so), hdl 0
4 ETW000 3775 0.003976
4 ETW000 [dev trc ,00000] Library '/usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so' loaded
4 ETW000 29 0.004005
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so
4 ETW000 25 0.004030
4 ETW000 [dev trc ,00000] Version of '/usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so' is "710.21", patchlevel (0.21)
4 ETW000 80 0.004110
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so
4 ETW000 23 0.004133
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so
4 ETW000 28 0.004161
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 33 0.004194
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=(nil))
4 ETW000 27 0.004221
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.004238
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=7fff64a3e720)
4 ETW000 24 0.004262
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.004279
4 ETW000 [dev trc ,00000] New connection 0 created 17 0.004296
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 34 0.004330
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=2aa9150)
4 ETW000 32 0.004362
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 18 0.004380
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 14 0.004394
4 ETW000 [dev trc ,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 19 0.004413
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection:
4 ETW000 28 0.004441
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 31 0.004472
4 ETW000 [dev trc ,00000] { DbSlSdbConnect(con_info_p=(nil)) 38 0.004510
4 ETW000 [dev trc ,00000] DBSDBSLIB : version 710.21, patch 0.021 (Make PL 0.21)
4 ETW000 31 0.004541
4 ETW000 [dev trc ,00000] MAXDB shared library (dbsdbslib) patchlevels (last 10)
4 ETW000 23 0.004564
4 ETW000 [dev trc ,00000] (0.021) NUMC conversion corrected (note 1288313)
4 ETW000 27 0.004591
4 ETW000 [dev trc ,00000] (0.021) Write the action LOB_GET_LENGTH into ST05 trace (note 1288056)
4 ETW000 25 0.004616
4 ETW000 [dev trc ,00000] (0.021) Default value for max. input variables is 2000 (note 655018)
4 ETW000 25 0.004641
4 ETW000 [dev trc ,00000] (0.021) Profile parameter to define max. input variables (note 655018)
4 ETW000 25 0.004666
4 ETW000 [dev trc ,00000] (0.021) Lob locator memory management optimized (note 1280771)
4 ETW000 27 0.004693
4 ETW000 [dev trc ,00000] (0.021) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
4 ETW000 25 0.004718
4 ETW000 [dev trc ,00000] (0.021) Input parameters for SQL statements increased (note 655018)
4 ETW000 26 0.004744
4 ETW000 [dev trc ,00000] (0.015) R3trans export aborts with signal 6 (note 1262245)
4 ETW000 27 0.004771
4 ETW000 [dev trc ,00000] (0.013) Call dbprocedures from a different schema (note 1256862)
4 ETW000 26 0.004797
4 ETW000 [dev trc ,00000] (0.010) Stream compression not switchable (note 1245770)
4 ETW000 24 0.004821
4 ETW000 [dev trc ,00000] 12 0.004833
4 ETW000 [dev trc ,00000] -> init() 21 0.004854
4 ETW000 [dev trc ,00000] STATEMENT_CACHE_SIZE = 1000 40 0.004894
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=152000) : 2b573315c010 (152016 bytes allocated)
4 ETW000 38 0.004932
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=2088000) : 2b5733182010 (2240032 bytes allocated)
4 ETW000 30 0.004962
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=304000) : 2b5733380010 (2544048 bytes allocated)
4 ETW000 33 0.004995
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=16144) : 16a14540 (2560208 bytes allocated)
4 ETW000 30 0.005025
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=32048) : 16a18680 (2592272 bytes allocated)
4 ETW000 27 0.005052
4 ETW000 [dev trc ,00000] -> loadClientRuntime() 1433 0.006485
4 ETW000 [dev trc ,00000] Loading SQLDBC client runtime ... 22 0.006507
4 ETW000 [dev trc ,00000] SQLDBC SDK Version : SQLDBC.H 7.7.4 BUILD 009-123-173-450
4 ETW000 4381 0.010888
4 ETW000 [dev trc ,00000] SQLDBC Library Version : libSQLDBC 7.7.6 BUILD 007-123-197-046
4 ETW000 26 0.010914
4 ETW000 [dev trc ,00000] SQLDBC client runtime is MaxDB 7.7.6.007 CL 197046
4 ETW000 40 0.010954
4 ETW000 [dev trc ,00000] SQLDBC supports new DECIMAL interface : 1 20 0.010974
4 ETW000 [dev trc ,00000] SQLDBC supports VARIABLE INPUT data : 1 20 0.010994
4 ETW000 [dev trc ,00000] SQLDBC supports Multiple Streams : 1 19 0.011013
4 ETW000 [dev trc ,00000] SQLDBC supports LOB LOCATOR KEEPALIVE : 1 17 0.011030
4 ETW000 [dev trc ,00000] SQLDBC supports LOB LOCATOR COPY : 1 16 0.011046
4 ETW000 [dev trc ,00000] -> getNewConnection() 17 0.011063
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=1728) : 16a2fa60 (2594016 bytes allocated)
4 ETW000 32 0.011095
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=1168) : 16a30a50 (2595200 bytes allocated)
4 ETW000 103 0.011198
4 ETW000 [dev trc ,00000] <- getNewConnection(con_hdl=0) 99 0.011297
4 ETW000 [dev trc ,00000] -> checkEnvironment(con_hdl=0) 30 0.011327
4 ETW000 [dev trc ,00000] -> connect() 40 0.011367
4 ETW000 [dev trc ,00000] INFO : SQLOPT= -I 0 -t 0 -S SAPR3 25 0.011392
4 ETW000 [dev trc ,00000] Try to connect (DEFAULT) on connection 0 ... 76 0.011468
4 ETW000 [dev trc ,00000] Thu Jan 12 12:21:47 2012 1003812 1.015280
4 ETW000 [dbsdbsql ,00000] *** ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combination)
4 ETW000 33 1.015313
4 ETW000 [dev trc ,00000] -> SetSapdbCA(errcode=4294963288) 20 1.015333
4 ETW000 [dev trc ,00000] -> freeConnection(con_hdl=0) 27 1.015360
4 ETW000 [dev trc ,00000] -> sdb_free(p=16a30a50, size=1168 (2594016 bytes allocated))
4 ETW000 79 1.015439
4 ETW000 [dev trc ,00000] close all opened locators of connection 0 51 1.015490
4 ETW000 [dev trc ,00000] -> sdb_free(p=16a2fa60, size=1728 (2592272 bytes allocated))
4 ETW000 28 1.015518
4 ETW000 [dev trc ,00000] } DbSlSdbConnect(rc=99) 17 1.015535
4 ETW000 [dblink ,00000] ***LOG BY2=>sql error -4008 performing CON 57 1.015592
4 ETW000 [dblink ,00000] ***LOG BY0=>POS(1) Unknown user name/password combination
4 ETW000 27 1.015619
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=41,arg_p=b82ef8)
4 ETW000 31 1.015650
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 1.015667
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=14,arg_p=7fff64a355f0)
4 ETW000 25 1.015692
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 30 1.015722
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=50,arg_p=7fff64a35608)
4 ETW000 28 1.015750
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 19 1.015769
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=13,arg_p=7fff64a35560)
4 ETW000 25 1.015794
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 19 1.015813
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=52,arg_p=7fff64a355b0)
4 ETW000 25 1.015838
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 16 1.015854
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"
4 ETW000 [dev trc ,00000] release memory of the SIBU buffers 73 1.015927
4 ETW000 [dev trc ,00000] release memory of the STATEMENT CACHE 19 1.015946
4 ETW000 [dev trc ,00000] -> sdb_free(p=16a18680, size=32048 (2560208 bytes allocated))
4 ETW000 33 1.015979
4 ETW000 [dev trc ,00000] -> sdb_free(p=16a14540, size=16144 (2544048 bytes allocated))
4 ETW000 25 1.016004
4 ETW000 [dev trc ,00000] -> sdb_free(p=2b5733380010, size=304000 (2240032 bytes allocated))
4 ETW000 25 1.016029
4 ETW000 [dev trc ,00000] -> sdb_free(p=2b5733182010, size=2088000 (152016 bytes allocated))
4 ETW000 54 1.016083
4 ETW000 [dev trc ,00000] -> sdb_free(p=2b573315c010, size=152000 (0 bytes allocated))
4 ETW000 145 1.016228 -
Solution Manager key for ERP upgrade for the same system ID on a different
Hi there,
We have migrated our R/3 DEV system (4.7) running on Windows 2003 to 64 bit and copied existing system using system copy for testing ECC 6.0 upgrades. Both the DEV systems, with the same system id, will be available for a short period. However, the new system, which also has same system id i.e DEV is not created in the Solution Manager landscape, as the system id with the same name already exists. Both the systems are created in SLD.
Can anyone clarify whether i can create the license key from the existing DEV system and use the same key for upgrade of DEV system running on different server? If not I will have to delete the current DEV system and create new DEV system running on 64 bit.
Thanks in advance,
Regards
ChanduHi,
You cannot use the old solman key as systems are on different server.
I think you have to delete the old Dev system and then generate new solman key.
Thanks
Sunny -
Solution Manager ChaRM Issues when Upgrading Satellite System
When upgrading a satellite system that is connected to Solution Manager's Change Request Management, is there anything that we need to be aware of?
Will Change Documents still be able to go to completion (Production status) if we modify the landscape from the time the Change Document is In Development to the time it is moved to Production?
1. Normal Correction (In Development) Development (ECC 5.0) -> Quality (ECC 5.0) -> Production (ECC 5.0)
2. Landscape is changed to Development (ECC 6.0) -> Quality (ECC 6.0) -> Production (ECC 5.0)
3. Normal Correction moved to To Be Tested -> Consolidated -> Production
Will the Normal Correction be in error because the landscape changed for the iBASE?
Are there any other lessons learned that anyone has experienced with Change Request Management or Implementation during and after an upgrade?
Thank You,
Carlen
Edited by: Carlen Yuen on Jan 13, 2009 1:50 AM
Edited by: Carlen Yuen on Jan 13, 2009 1:51 AMThanks Subhashini!
We had issues updating the Task List in the past. After we update the landscape and refresh the project and update the Task List, do you foresee any other problems?
Are there any additional items we should look out for? For example, we understand it is a requirement to release all transports prior to beginning the upgrade. However, since the release of the transport locks the change into the cycle for the next production move, this will present a problem if the change is not yet ready to be moved into Production. Do you have any further insight to any additional issues such as this?
Thanks again!
Carlen -
Solution Manager 7.1 -SOLMAN_WORKCENTER is not working
Dear All,
Newly installed Solution Manager 7.1 System (ABAP+JAVA).
Created new client and new sap id solman_admin and assigned all SAP_SMWORK_BASIC* role to user id.
Activated the all relevant services by tcode SICF and set the parameter icm/host_name_full=FQDN
Where after executing the tcode solman_workcenter but its showing :-
This page can’t be displayed
Make sure the web address http://<hostname.xxxxxx.com:8000 is correct.
Look for the page with your search engine.
Refresh the page in a few minutes.
How to troubleshoot this issue please help
Regards,
AjayDear All,
Problem solved.
After done all above suggestion; add two more things :-
1. Go to RZ10 - Instance profile - set the parameter - icm/server_port_0 = PROT=HTTP,PORT=8000
Previous the vale was there 80$$ instead of 8000
2. add address of solman in local host file/ give permission in DNS system
Thanks !!
Regards,
Ajay -
DISP+WORK STOPPED-----------ORA::376 ERROR
hi all,
1) in my ides system, disp+work got stopped
2) when i check the syslog in mmc i came across ORA :: 00376 error occuring several times. file cannot be read at this time .ora-1110 error.
3) i went through the sap note::328785.
4)DBIF_REPO_SQL_ERROR
5) i am pasting the dev_disp trace file below.....
also what more i need to check......
DEV_DISP file :::::::;
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EC6
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 102
intno 20050900
make: multithreaded, Unicode, optimized
pid 3948
Tue Aug 12 11:41:41 2008
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3948) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 102 successfully loaded
shared lib "dw_xtc.dll" version 102 successfully loaded
shared lib "dw_stl.dll" version 102 successfully loaded
shared lib "dw_gui.dll" version 102 successfully loaded
shared lib "dw_mdm.dll" version 102 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Aug 12 11:41:46 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ecc6server_EC6_00 <
DpShMCreate: sizeof(wp_adm) 21480 (1432)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1520)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05EB0040, size: 4894592)
DpShMCreate: allocated sys_adm at 05EB0040
DpShMCreate: allocated wp_adm at 05EB1E80
DpShMCreate: allocated tm_adm_list at 05EB7268
DpShMCreate: allocated tm_adm at 05EB7298
DpShMCreate: allocated wp_ca_adm at 062C06D8
DpShMCreate: allocated appc_ca_adm at 062C6498
DpShMCreate: allocated comm_adm at 062C83D8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06349298
DpShMCreate: allocated gw_adm at 063492D8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06349308
DpShMCreate: allocated wall_adm at 06349310
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Aug 12 11:41:47 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Tue Aug 12 11:41:50 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1626]
***LOG Q0K=> DpMsAttach, mscon ( ecc6server) [dpxxdisp.c 11664]
DpStartStopMsg: send start message (myname is >ecc6server_EC6_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Tue Aug 12 11:41:51 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Tue Aug 12 11:42:30 2008
ERROR => W0 (pid 3496) died [dpxxdisp.c 14319]
ERROR => W1 (pid 3504) died [dpxxdisp.c 14319]
ERROR => W2 (pid 3512) died [dpxxdisp.c 14319]
ERROR => W3 (pid 3508) died [dpxxdisp.c 14319]
ERROR => W4 (pid 3516) died [dpxxdisp.c 14319]
ERROR => W5 (pid 3524) died [dpxxdisp.c 14319]
ERROR => W6 (pid 3532) died [dpxxdisp.c 14319]
ERROR => W7 (pid 3536) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W8 (pid 3540) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W9 (pid 3552) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W10 (pid 3560) died [dpxxdisp.c 14319]
ERROR => W11 (pid 3568) died [dpxxdisp.c 14319]
ERROR => W12 (pid 3452) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W13 (pid 1664) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W14 (pid 3604) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:40 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Aug 12 06:12:40 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3496 Ended no 1 0 0
1 DIA 3504 Ended no 1 0 0
2 DIA 3512 Ended no 1 0 0
3 DIA 3508 Ended no 1 0 0
4 DIA 3516 Ended no 1 0 0
5 DIA 3524 Ended no 1 0 0
6 DIA 3532 Ended no 1 0 0
7 DIA 3536 Ended no 1 0 0
8 UPD 3540 Ended no 1 0 0
9 ENQ 3552 Ended no 1 0 0
10 BTC 3560 Ended no 1 0 0
11 BTC 3568 Ended no 1 0 0
12 BTC 3452 Ended no 1 0 0
13 SPO 1664 Ended no 1 0 0
14 UP2 3604 Ended no 1 0 0
Dispatcher Queue Statistics Tue Aug 12 06:12:40 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Tue Aug 12 06:12:40 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Aug 12 06:12:40 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:45 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ecc6server_EC6_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3472) (SOFT_KILL)
Stop icman
killing process (3492) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3472 HANDLE:1584)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:46 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3472 HANDLE:1584)
wait for end of icman
[DpProcDied] Process lives (PID:3492 HANDLE:1592)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:47 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3492 HANDLE:1592)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:48 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3492 HANDLE:1592)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:49 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3492 HANDLE:1592)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:50 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3492 HANDLE:1592)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:51 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3492 HANDLE:1592)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:52 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3492 HANDLE:1592)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:53 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3492 HANDLE:1592)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:54 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3492 HANDLE:1592)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:55 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3492 HANDLE:1592)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:56 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3492 HANDLE:1592)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1613
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Aug 12 11:42:57 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3492 HANDLE:1592)
DpStartStopMsg: send stop message (myname is >ecc6server_EC6_00 <)
NiIMyHostName: hostname = 'ecc6server'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Aug 12 11:42:58 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11977]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1516 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1516 (pos=2)
SiSelNRemove: removed sock 1516
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/15
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1516
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3948) [dpxxdisp.c 10334]
Good Bye .....
regards,
bhupesh
Edited by: mudari bhupesh on Aug 13, 2008 11:06 AMhi saini,
the following are the steps what i did after reading the note 328785.
first i checked which datafiles are in recover status.
SELECT NAME FROM V$DATAFILE WHERE STATUS='RECOVER';
then i got some 11 datafiles which are in recover state.
when i tried to recover them i am getting sql error as invalid file name (even though everything is correct including the file name)
second i tried to check datafiles which are in offline state.
SELECT NAME FROM V$DATAFILE WHERE STATUS='OFFLINE';
the reply from sql screen was no rows selected.
but in sap note 328785 it has been given that if no rows are selected your problem is solved.(but the problem still persists).
this is what i did in the sql screen and got the following results:::
SQL> SELECT TABLESPACE_NAME FROM DBA_TABLESPACES WHERE STATUS='OFFLINE';
no rows selected
SQL> SELECT NAME FROM V$DATAFILE WHERE STATUS='RECOVER';
NAME
D:\ORACLE\EC6\SAPDATA1\SR3700_2\SR3700.DATA2
D:\ORACLE\EC6\SAPDATA1\SR3700_3\SR3700.DATA3
D:\ORACLE\EC6\SAPDATA1\SR3700_4\SR3700.DATA4
D:\ORACLE\EC6\SAPDATA1\SR3700_5\SR3700.DATA5
D:\ORACLE\EC6\SAPDATA1\SR3700_6\SR3700.DATA6
D:\ORACLE\EC6\SAPDATA1\SR3700_7\SR3700.DATA7
D:\ORACLE\EC6\SAPDATA1\SR3700_8\SR3700.DATA8
D:\ORACLE\EC6\SAPDATA1\SR3700_9\SR3700.DATA9
D:\ORACLE\EC6\SAPDATA1\SR3700_10\SR3700.DATA10
D:\ORACLE\EC6\SAPDATA1\SR3700_11\SR3700.DATA11
D:\ORACLE\EC6\SAPDATA1\SR3700_12\SR3700.DATA12
NAME
D:\ORACLE\EC6\SAPDATA1\SR3700_13\SR3700.DATA13
D:\ORACLE\EC6\SAPDATA1\SR3700_14\SR3700.DATA14
D:\ORACLE\EC6\SAPDATA1\SR3700_15\SR3700.DATA15
D:\ORACLE\EC6\SAPDATA1\SR3700_16\SR3700.DATA16
D:\ORACLE\EC6\SAPDATA1\SR3700_17\SR3700.DATA17
D:\ORACLE\EC6\SAPDATA1\SR3700_18\SR3700.DATA18
17 rows selected.
SQL> RECOVER DATAFILE D:\ORACLE\EC6\SAPDATA1\SR3700_2\SR3700.DATA2;
ORA-02236: invalid file name
SQL> RECOVER DATAFILE D:\ORACLE\EC6\SAPDATA1\SR3700_3\SR3700.DATA3;
ORA-02236: invalid file name
SQL> SELECT NAME FROM V$DATAFILE WHERE STATUS='OFFLINE';
no rows selected
regards,
bhupesh -
Hi all,
In my MMC disp+work showing stopped.
here i am giving my dev_disp trace file.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Mar 26 18:05:32 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII
pid 1796
***LOG Q00=> DpSapEnvInit, DPStart (00 1796) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Mon Mar 26 18:05:37 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 6624 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04970040, size: 2505416)
DpShMCreate: allocated sys_adm at 04970040
DpShMCreate: allocated wp_adm at 049717A8
DpShMCreate: allocated tm_adm_list at 04973188
DpShMCreate: allocated tm_adm at 049731B0
DpShMCreate: allocated wp_ca_adm at 04B910F8
DpShMCreate: allocated appc_ca_adm at 04B95748
DpShMCreate: allocated comm_adm_list at 04B96EB8
DpShMCreate: allocated comm_adm at 04B96ED0
DpShMCreate: allocated vmc_adm_list at 04BC5CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04BC5CF8
DpShMCreate: allocated wall_adm at 04BC5D00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 502 blocks reserved for free list.
ES initialized.
Mon Mar 26 18:05:38 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( IHGWTM1078A) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Mon Mar 26 18:05:39 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Mon Mar 26 18:06:18 2007
ERROR => W0 (pid 3440) died [dpxxdisp.c 12187]
ERROR => W1 (pid 3556) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 2300) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 2892) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 1092) died [dpxxdisp.c 12187]
ERROR => W5 (pid 2640) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2100) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 2400) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3440 (SIGUSR2)
ERROR => DpWpKill(3440, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3556 (SIGUSR2)
ERROR => DpWpKill(3556, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-2300 (SIGUSR2)
ERROR => DpWpKill(2300, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-2892 (SIGUSR2)
ERROR => DpWpKill(2892, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-1092 (SIGUSR2)
ERROR => DpWpKill(1092, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2640 (SIGUSR2)
ERROR => DpWpKill(2640, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2100 (SIGUSR2)
ERROR => DpWpKill(2100, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-2400 (SIGUSR2)
ERROR => DpWpKill(2400, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 26 18:06:28 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Mar 26 12:36:28 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3440 Ended no 1 0 0
1 DIA 3556 Ended no 1 0 0
2 UPD 2300 Ended no 1 0 0
3 ENQ 2892 Ended no 1 0 0
4 BTC 1092 Ended no 1 0 0
5 BTC 2640 Ended no 1 0 0
6 SPO 2100 Ended no 1 0 0
7 UP2 2400 Ended no 1 0 0
Dispatcher Queue Statistics Mon Mar 26 12:36:28 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Mon Mar 26 12:36:28 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Mar 26 12:36:28 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 26 18:06:33 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3612) (SOFT_KILL)
Stop icman
killing process (1756) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3612 HANDLE:1612)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 26 18:06:34 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3612 HANDLE:1612)
[DpProcDied] Process died (PID:1756 HANDLE:1608)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'IHGWTM1078A'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1620
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 1796) [dpxxdisp.c 8495]
please give some idea,
thx in advance.
regards
vinnu.Hi Vinay,
Is the problem with the IDES version in your Home PC? If it so, please also confirm what is the status of the Work Processes when the disp+work is showing stopped. IF the workprocesses are coming to an ENDED state, then the problem is with the Kernal. Some of the kernal files may be missing.
The work process might be comming to end due to some discrepencies in the disp+work.exe file which would be in the Kernel folder
/sapmnt/exe or /usr/sap/<SID>/<DVEBMGS<NR>>/exe
log on to the SYSTEM as administrator and
go to CMD
go to the above mentioned directory where the disp+work.exe is there.
run disp+work -v there and see what is the result.
This also happens due to some oracle db errors. So, first you search whether the exe file is there or not in the path mentioned. If the exe file is empty, just copy the exe file in to that from the sap kernal software. Or else, replace the entire kernal folder in your pc with new one.
Hope this works.
regards,
rajsekhar -
Hi,
We installed SAP Ecc6 + oracle 10g on windows 2003
After we restart the server SAP mmc Disp+work process to be stopped.
dev_w0 log file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Dec 10 06:38:15 2009
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\DVEBMGS03\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\DEV\DVEBMGS03\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\DEV\DVEBMGS03\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno 03
M sid DEV
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 114
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 5572
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5572) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 15800 (1436)
M DpShMCreate: sizeof(tm_adm) 4232256 (21056)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1536)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06A40040, size: 4889440)
M DpShMCreate: allocated sys_adm at 06A40040
M DpShMCreate: allocated wp_adm at 06A42090
M DpShMCreate: allocated tm_adm_list at 06A45E48
M DpShMCreate: allocated tm_adm at 06A45E78
M DpShMCreate: allocated wp_ca_adm at 06E4F2B8
M DpShMCreate: allocated appc_ca_adm at 06E55078
M DpShMCreate: allocated comm_adm at 06E56FB8
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06ED7E78
M DpShMCreate: allocated gw_adm at 06ED7EB8
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06ED7EE8
M DpShMCreate: allocated wall_adm at 06ED7EF0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 10 06:38:16 2009
M ThInit: running on host sapdev
M calling db_connect ...
C Prepending D:\usr\sap\DEV\DVEBMGS03\exe to Path.
C
C Thu Dec 10 06:38:17 2009
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 067755A8 0677AB44 0677A3CC
C Attaching to DB Server DEV (con_hdl=0,svchp=0677A318,srvhp=0678BF04)
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12518
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 11042]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 067755A8 0677AB44 0677A3CC
C Detaching from DB Server (con_hdl=0,svchp=0677A318,srvhp=0678BF04)
C Attaching to DB Server DEV (con_hdl=0,svchp=0677A318,srvhp=0678BF04)
C
C Thu Dec 10 06:38:18 2009
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12518
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 11042]
B ***LOG BY2=> sql error 12518 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 12518 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapdev_DEV_03 on host sapdev (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Dec 10 06:38:18 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10486
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5572) [dpnttool.c 327]
R3trans -x
C:\Documents and Settings\devadm.SAPDEV>R3trans -x
This is R3trans version 6.14 (release 700 - 29.05.07 - 13:40:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_o
ra_tnsname = 'DEV'"
R3trans finished (0012).
C:\Documents and Settings\devadm.SAPDEV>
Please help me how to resolve my issue.
Thanks for your helptrans.log file
4 ETW000 R3trans version 6.14 (release 700 - 29.05.07 - 13:40:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 10.12.2009 - 06:56:46
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu Dec 10 06:56:46 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 7667 0.007667
4 ETW000 [dev trc ,00000] using "D:\usr\sap\DEV\DVEBMGS03\exe\dboraslib.dll"
4 ETW000 35 0.007702
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 16 0.007718
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 25 0.007743
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.107)
4 ETW000 112 0.007855
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 24 0.007879
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 34 0.007913
4 ETW000 [dev trc ,00000] New connection 0 created 30 0.007943
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 34 0.007977
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 21 0.007998
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 23 0.008021
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.008053
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 572 0.008625
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.1.0' 22719 0.031344
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 36 0.031380
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 5815 0.037195
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPDEV's password 34 0.037229
4 ETW000 [dev trc ,00000] Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 35 0.037264
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 31 0.037295
4 ETW000 [dev trc ,00000] 0 UTF8 1 03573F00 00339B64 003393EC
4 ETW000 109 0.037404
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 9649 0.047053
4 ETW000 [dev trc ,00000] Allocating server context handle 37 0.047090
4 ETW000 [dev trc ,00000] Attaching to DB Server DEV (con_hdl=0,svchp=00339338,srvhp=0358749C)
4 ETW000 56 0.047146
4 ETW000 [dev trc ,00000] Thu Dec 10 06:56:47 2009 57660 0.104806
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12518
4 ETW000 32 0.104838
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12518'
4 ETW000 26 0.104864
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12518 17783 0.122647
4 ETW000 [dev trc ,00000] Try to connect with default password 105 0.122752
4 ETW000 [dev trc ,00000] Connecting as SAPDEV/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 28 0.122780
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 30 0.122810
4 ETW000 [dev trc ,00000] 0 UTF8 1 03573F00 00339B64 003393EC
4 ETW000 30 0.122840
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0358749C) 17 0.122857
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=00339338,srvhp=0358749C)
4 ETW000 25 0.122882
4 ETW000 [dev trc ,00000] Deallocating server context handle 0358749C 22 0.122904
4 ETW000 [dev trc ,00000] Allocating server context handle 19 0.122923
4 ETW000 [dev trc ,00000] Attaching to DB Server DEV (con_hdl=0,svchp=00339338,srvhp=0358749C)
4 ETW000 35 0.122958
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12518
4 ETW000 9351 0.132309
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12518'
4 ETW000 26 0.132335
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12518 16 0.132351
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12518 performing CON [dblink#3 @ 431]
4 ETW000 1695 0.134046
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12518: TNS:listener could not hand off client connection [dblink#3 @ 431]
4 ETW000 27 0.134073
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'" -
Disp+work stopped in sql database windowsNT 5.2 Service pack1 server
Hello Gurus,
in my windows XI Server im facing a problem ,the disp+work is not starting (stopped),remaining all services are started .while i tried to execute r3trans -d its giving the following error:
4 ETW000 r3trans version 6.13 (release 640 - 27.03.07 - 11:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 27.08.2010 - 11:27:43
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Aug 27 11:27:46 2010 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0.000000
4 ETW000 [dbcon.c ,00000] *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
4 ETW000 0.000000
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
.and i checked the dev_disp,dev_msg,dev_w0 logs also
dev_w0 logs as follows
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Aug 27 13:19:02 2010
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DXI\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\DXI\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\DXI\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.182)
B New connection 0 created
M sysno 00
M sid DXI
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 182
M intno 20020600
M make: multithreaded, Unicode
M pid 5916
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5916) [dpxxdisp.c 1162]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 33000 (1320)
M DpShMCreate: sizeof(tm_adm) 2969176 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 077B0040, size: 3404152)
M DpShMCreate: allocated sys_adm at 077B0040
M DpShMCreate: allocated wp_adm at 077B1B88
M DpShMCreate: allocated tm_adm_list at 077B9C70
M DpShMCreate: allocated tm_adm at 077B9C98
M DpShMCreate: allocated wp_ca_adm at 07A8EAF0
M DpShMCreate: allocated appc_ca_adm at 07A948B0
M DpShMCreate: allocated comm_adm_list at 07A967F0
M DpShMCreate: allocated comm_adm at 07A96808
M DpShMCreate: allocated vmc_adm_list at 07ADD4D8
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 07ADD500
M DpShMCreate: allocated wall_adm at 07ADD508
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Aug 27 13:19:03 2010
M calling db_connect ...
C Thread ID:3088
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\DXI\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 182
C patchcomment MSSQL: MSSTATS dual clock (1048180)
C np:(local) connection used on SAPXIDEV
C CopyLocalParameters: dbuser is 'dxi'
C
C Fri Aug 27 13:19:04 2010
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C
C Fri Aug 27 13:19:05 2010
C Provider Release:08.10.1830
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C Cache sizes: header 68 bytes, 20000 names (31680000 bytes), 1000 dynamic statements (5696000 bytes), total 37376068 bytes
C Using shared procedure name cache SAPXIDEV_DXIDXI_DXI_MEM initialized by another process.
C Connected to db server : [SAPXIDEV] server_used : [np:(local)], dbname: DXI, dbuser: dxi
C pn_id:SAPXIDEV_DXIDXI_DXI
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100827 131903 SAPXIDEV
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Fri Aug 27 13:19:09 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0BDD0040, size: 4400000)
M SHM_ROLL_AREA (addr: 86D00040, size: 268435456)
M SHM_PAGING_AREA (addr: 104F0040, size: 134217728)
M SHM_ROLL_ADM (addr: 0C210040, size: 2678942)
M SHM_PAGING_ADM (addr: 0C4A0040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0C530040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0C5C0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 25, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 185000C8, size: 30000000, end: 1A19C448)
B dbtbxbuf: Buffer TABLP (addr: 1A1A00C8, size: 10240000, end: 1AB640C8)
B dbexpbuf: Buffer EIBUF (addr: 0FBE00D0, size: 4194304, end: 0FFE00D0)
B dbexpbuf: Buffer ESM (addr: 1AB700D0, size: 4194304, end: 1AF700D0)
B dbexpbuf: Buffer CUA (addr: 1AF800D0, size: 3072000, end: 1B26E0D0)
B dbexpbuf: Buffer OTR (addr: 1B2700D0, size: 4194304, end: 1B6700D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
N SncInit(): Initializing Secure Network Communication (SNC)
N PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/32/32)
N SncInit(): found snc/data_protection/max=3, using 3 (Privacy Level)
N SncInit(): found snc/data_protection/min=1, using 1 (Authentication Level)
N SncInit(): found snc/data_protection/use=9, using 3 (Privacy Level)
N SncInit(): found snc/gssapi_lib=c:\usr\sap\dxi\sys\exe\run\sapcrypto.dll
N File "c:\usr\sap\dxi\sys\exe\run\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
N The internal Adapter for the loaded GSS-API mechanism identifies as:
N Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
N *** ERROR => SncInit(): Missing profile paramter "snc/identity/as"
N [sncxxpar0614]<<- ERROR: SncInit()==SNCERR_INIT
N sec_avail = "false"
M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001) [thxxsnc.c 223]
M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT) [thxxsnc.c 225]
M in_ThErrHandle: 1
M *** ERROR => SncInitU (step 1, th_errno 44, action 3, level 1) [thxxhead.c 9613]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5916) [dpnttool.c 357]
please help me to solve this issue guyss,please help me ...........
Thanks&Regards,
Peervali=> Invalid profile parameter dbms/type (or environment variable dbms_type) = , cannot load DB library
You are getting the above error while R3trans -d because the required environment variables are not set properly. Are you using user <sid>adm to execute the command?
ERROR => SncInit(): Missing profile paramter "snc/identity/as" N [sncxxpar0614]
you have enabled SNC but not all profile parameters are properly set. This will prevent system to start.
you have to set this properly.
Provider SQLNCLI could not be initialized
SQLNCLI need to be installed for MSSSQL 2005. But this is just a warning -
Hi eveybody,
I'm using SAP R/3 4.6B with oracle 8.1.7 on windows server 2003, anda when a change NIC's IP address, disp+work turns yellow.
Can anyone help?
ThxCompletely agree with Markus.
But, for some odd reason if you must do this, then you might want to:
Run following at the command prompt.
ipconfig /flushdns
nbtstat -nR
Also, depending on speed of your network, number of domain controllers, and how your WINS/DNS is configured, you may experience blackout periods (minutes) when swapping IPs at the NIC level.
Lastly, SM51 > reset hostname buffer for entire system.
Once the black out and you can actually net view (from and to) the server where the NIC IP was just chaned, WP should start reconnecting fine.
But, again, you shouldn't be swapping IP on a running SAP system. It's just begging for bad things to happen. -
Hello,
We have Installed Solman 7.1 SP4 and now trying to upgrade to SP10.
kernel release 721
kernel make variant 721_EXT_REL
OS windows 2008 R2
DB: Oracle 11.2.0.3
This seems to be stuck in Preprocessing Phase.
SAPup LOg
CURRENTPHASE MAIN_SHDRUN/CMDFILE_UPG
...started at 20140507212957
...begin processing at 20140507212959
..finished at 20140507213914 with status SUCCEEDED.
CURRENTPHASE MAIN_SHDRUN/DDIC_UPG
...started at 20140507213914
...begin processing at 20140507213916
SAPup.ECO
### Phase MAIN_SHDRUN/DDIC_UPG:
SAPup> Starting subprocess in phase 'DDIC_UPG' at 20140507213929
ENV: DBMS_TYPE=ora
ENV: JAVA_HOME=H:\usr\sap\SOL\DVEBMGS00\exe\sapjvm_4
ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV: ORACLE_HOME=G:\oracle\SOL\11203
ENV: ORACLE_SID=SOL
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=H:\usr\sap\SOL\SUM\abap\exe;G:\oracle\SOL\11203\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;H:\usr\sap\SOL\SYS\exe\uc\NTAMD64
ENV: SAPDATA_HOME=G:\oracle\SOL
ENV: SAPSYSTEMNAME=SOL
ENV: auth_shadow_upgrade=1
ENV: dbs_ora_schema=SAPSR3
ENV: dbs_ora_tnsname=SOL
ENV: rsdb_ssfs_connect=0
EXECUTING H:\usr\sap\SOL\SUM\abap\exe\tp.EXE
"pf=H:\usr\sap\SOL\SUM\abap\var\DDICUPG.TPP" put SOL
"-Dmainimp_proc=1" "-Dparallel=3"
This is H:\usr\sap\SOL\SUM\abap\exe\tp.EXE version 380.13.51 (release
721, unicode enabled)
Looking for effective putsteps ... ... ready (looking for putsteps)
ULOG
### Phase MAIN_SHDRUN/DDIC_UPG:
soladm 20140507213919 : H:\usr\sap\SOL\SUM\abap\exe\tp.EXE
pf=H:\usr\sap\SOL\SUM\abap\var\SHADOW.TPP setstopmark buffer=SOL
before SAPK-70107INWEBCUIF (pid=9528)
soladm 20140507213929 : H:\usr\sap\SOL\SUM\abap\exe\tp.EXE
pf=H:\usr\sap\SOL\SUM\abap\var\DDICUPG.TPP put SOL -Dmainimp_proc=1
-Dparallel=3 (pid=14756)
Parameter Values
abap/heap_area_nondia 300000000
rsdb/obj/max_objects 20000
rsdb/obj/buffersize 50000
sap/bufdir_entries 10000
zcsa/presentation_buffer_area 20000000
zcsa/db_max_buftab 10000
zcsa/table_buffer_area 100000000
rsdb/cua/buffersize 10000
rtbb/buffer_length 60000
rsdb/ntab/irbdsize 15000
abap/shared_objects_size_MB 350
abap/buffersize 500000
rdisp/max_wprun_time 3600
ztta/roll_area 30000000
Please help.
RaghuI can see SAPupStat log as
2014/05/07 21:17:05: 39.08% LEFT: 258:43:48 END: 2014/05/18 16:00:53
2014/05/07 21:27:35: 39.14% LEFT: 258:23:47 END: 2014/05/18 15:51:22
2014/05/07 21:28:31: 39.64% LEFT: 253:02:17 END: 2014/05/18 10:30:48
2014/05/07 21:29:57: 39.81% LEFT: 251:18:37 END: 2014/05/18 08:48:34
2014/05/07 21:39:14: 39.87% LEFT: 250:57:32 END: 2014/05/18 08:36:46
Does it mean it will end on 2014/05/18 ? -
Hello,
phase "MAIN_SHDIMP/SUBMOD_SHDIMP/SHADOW_IMPORT_INC" looks like hanged. I tried restarting the SAP SUM and oracle but it get stopped at same stage. There is no log generating neither any change in tmp file for almost 10 hours.
Changed the Shadow system memory according to 1387739
set the Oracle initialization parameter " _use_zero_copy_io=false"
ULOG
### Phase MAIN_SHDIMP/SUBMOD_SHDIMP/SHADOW_IMPORT_INC:
soladm 20140511004744 : H:\usr\sap\SOL\SUM\abap\exe\tp.EXE pf=H:\usr\sap\SOL\SUM\abap\var\DEFAULT.TPP setstopmark buffer=SOL before SAPK-707BZINBICONT (pid=584)
soladm 20140511004745 : H:\usr\sap\SOL\SUM\abap\exe\tp.EXE pf=H:\usr\sap\SOL\SUM\abap\var\SHDALLIMP.TPP put SOL -Dmainimp_proc=1 -Dparallel=3 (pid=1076)
SHDALLIMP
SHADOW IMPORT ERRORS and RETURN CODE in SAPKB70210.SOL
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4 ETW000 [ dbtrtab ,00000] ***LOG BY4=>sql error 3113 performing SEL on table TRBAT3
4 ETW000 65 28272.089379
4 ETW000 [ dbtrtab ,00000] ***LOG BY0=>ORA-03113: end-of-file on communication channel 37 28272.089416
4 ETW000 Process ID: 7936
4 ETW000 Session ID: 239 Serial number: 47
2EETW000 sap_dext called with msgnr "1":
According toNote 1597414 I need to create TRBAT3 in source system , ie my main system. Is it ok to create now or do I need to restart Phase after the creating or do I need to start the SUM from scratch ?
Regards,
RaghuHi Vikram,
Sorry it was my mistake , I have set the parameter wrongly. Set it properly and it starts working.
Your note were relevant and useful.
Thanks,
Raghu -
Disp+work stop because of shared memory?
Hello Gurus, I have an SAP server that will not start. It was running previously, but after a parameter update and an instance restart, I cannot get the dispatcher running.
System is Windows 2012 Server, MSSQL 2008 R2, 16 Core 132 GB RAM.
I believe it is related to shared memory overlapping somehow, but I am not sure how to resolve or investigate. I have had issues previously with memory overlap halting SAP servers with Diagnostics Agents, but this server is not currently running any DAA. It is running SAPRouter and some SAP Web Dispatcher instances.
I will include my trace files below:
Please help!
DEV_W0:
trc file: "dev_w0", trc level: 1, release: "721"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid PRD
M systemid 562 (PC with Windows NT)
M relno 7210
M patchlevel 0
M patchno 100
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
M pid 7668
M
M kernel runs with dp version 137000(ext=119000) (@(#) DPLIB-INT-VERSION-137000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7668) [dpxxdisp.c 1376]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 42864 (2256)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
M DpShMCreate: sizeof(comm_adm) 1384080 (2744)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2160)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000000200050, size: 7174832)
M DpShMCreate: allocated sys_adm at 0000000000200060
M DpShMCreate: allocated wp_adm_list at 00000000002030B0
M DpShMCreate: allocated wp_adm at 00000000002032A0
M DpShMCreate: allocated tm_adm_list at 000000000020DA20
M DpShMCreate: allocated tm_adm at 000000000020DA70
M DpShMCreate: allocated wp_ca_adm at 0000000000750980
M DpShMCreate: allocated appc_ca_adm at 0000000000760390
M DpShMCreate: allocated comm_adm at 000000000076FDA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 00000000008C1C40
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 00000000008C1CF0
M DpShMCreate: allocated j2ee_adm at 00000000008C1D30
M DpShMCreate: allocated ca_info at 00000000008C2CB0
M DpShMCreate: allocated wall_adm at 00000000008C2D40
M DpCommAttachTable: attached comm table (header=000000000076FDA0/ft=000000000076FDB0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M
M Fri May 16 01:23:14 2014
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Fri May 16 01:23:15 2014
M ThInit: running on host SAPERP
M
M Fri May 16 01:23:16 2014
M calling db_connect ...
B Loading DB library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' is "721.02", patchlevel (0.44)
C Callback functions for dynamic profile parameter registered
C Thread ID:4168
C Thank You for using the SLODBC-interface
C Using dynamic link library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C SAP patchlevel 0
C SAP patchno 100
C Last MSSQL DBSL patchlevel 0
C Last MSSQL DBSL patchno 44
C Last MSSQL DBSL patchcomment DBSL support for Microsoft ODBC Driver 11 for SQL Server (1816426)
C ODBC Driver chosen: SQL Server Native Client 11.0 native
C lpc:(local) connection used on SAPERP
C lpc:(local) connection used on SAPERP
C Driver: sqlncli11.dll Driver release: 11.00.3000
C GetDbRelease: 11.00.3339.00
C GetDbRelease: Got DB release numbers (11,0,3339,0)
B Connection 0 opened (DBSL handle 0)
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
I
I Fri May 16 01:23:17 2014
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000018030050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFDDAB0050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000018470050, size: 134217728)
M SHM_ROLL_ADM (addr: 0000000020480050, size: 2767448)
M SHM_PAGING_ADM (addr: 0000000020730050, size: 787488)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000020800050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 31056 bytes (50 server) at 0000000000910050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
B
B Fri May 16 01:23:18 2014
B db_con_shm_ini: WP_ID = 0, WP_CNT = 19, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000027280160, size: 90000000, end: 000000002C854BE0)
B dbtbxbuf: Buffer TABLP (addr: 000000002C860160, size: 20480000, end: 000000002DBE8160)
B dbsync[db_syinit]: successfully attached to shared memory, sync_adm_p = 0000000011BE0050
B dbsync[db_syinit]: Buffer synchronisation started with
B sync_concept = SEQ_NR
B sendon = 1
B bufreftime = 120
B max_gap_wait_time = 60
B ddlog_del_time = 60
B last_counter = 702514
B oldest_gap = (2147483647,00000000000000)
B time_of_last_sync = 20140516012317
B MySysId = 'SAPERP 00'
B dbexpbuf[EXP_SHB]: buffer EIBUF installed with
B semkey = 35
B shmkey = 54
B wp_n = 19
B sclass = 0
B block_length = 256
B max_objects = 2000
B max_obj_size = 859872
B pref_obj_size = 0
B est_large_obj_size = 16384
B free_vec_lg = 65
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13438
B free_blocks = 13438
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_SHM]: buffer ESM installed with
B semkey = 56
B shmkey = 65
B wp_n = 19
B sclass = 0
B block_length = 256
B max_objects = 2000
B max_obj_size = 859872
B pref_obj_size = 0
B est_large_obj_size = 16384
B free_vec_lg = 65
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13438
B free_blocks = 13438
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_CUA]: buffer CUA installed with
B semkey = 30
B shmkey = 47
B wp_n = 19
B sclass = 10
B block_length = 512
B max_objects = 1500
B max_obj_size = 626016
B pref_obj_size = 0
B est_large_obj_size = 98304
B free_vec_lg = 193
B hash_vec_size = 3001
B buffer_l = 3072000
B max_blocks = 4892
B free_blocks = 4892
B mutex_n = 3001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_OTR]: buffer OTR installed with
B semkey = 55
B shmkey = 64
B wp_n = 19
B sclass = 13
B block_length = 256
B max_objects = 2000
B max_obj_size = 859872
B pref_obj_size = 0
B est_large_obj_size = 20480
B free_vec_lg = 81
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13438
B free_blocks = 13438
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M rdisp/thwpsf_critical_path : -1 -> 0
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
G RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 99, pEnforce = 1 )
G RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000034052380
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 00000000382B00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 00000000382B06A0
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 23104kb, dir_size: 22312kb.
A Attached to PXA (address 000007FFEDAE0050, size 300000K, 1 fragments of 276896K )
A PXA allocated (address 000007FFEDAE0050, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|272|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ATRA: pfclock execution time = 0
A abap/force_local_update_task=0
A ABAP ShmAdm attached (addr=000007DFDF142000 leng=20955136 end=000007DFE053E000)
A >> Shm MMADM area (addr=000007DFDF639B80 leng=242240 end=000007DFDF674DC0)
A >> Shm MMDAT area (addr=000007DFDF675000 leng=15503360 end=000007DFE053E000)
A RFC Destination> destination SAPERP_PRD_00 host SAPERP system PRD systnr 0 (SAPERP_PRD_00)
A RFC Options> H=SAPERP,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
H HTTP> Parameter icf/ssocookie_mandatory set to 0
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:721.02]):
B max_blocking_factor = 50, min_blocking_factor = 5,
B max_in_blocking_factor = 255, min_in_blocking_factor = 10,
B max_union_blocking_factor = 50, min_union_blocking_factor = 5,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0
M ThrCreateShObjects allocated 39514 bytes at 0000000011C00050
Y dyWpInit
Y ztta/dynpro_ara 800000
Y ztta/cua_ara 500000
Y ztta/diag_ara 250000
N SsfSapSecin: getenv(SECUDIR)=="E:\usr\sap\PRD\DVEBMGS00/sec"
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is E:\usr\sap\PRD\DVEBMGS00\exe\sapcrypto.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="E:\usr\sap\PRD\DVEBMGS00/sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPCRYPTOLIB 5.5.5C pl32 (Apr 2 2011) MT-safe
N =================================================
N
N Fri May 16 01:23:20 2014
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 721, [7210.0.100.20020600]
W ITS Plugin: Int.version, [34]
W ITS Plugin: Feature set: [31]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N SPNegoInit: SPNego disabled ("spnego/enable" not set to 1)
N VSI: WP init in ABAP VM completed with rc=0
E EnqLockTableSizeCalculate: session quota = 100%
E EnqLockTableAttach2: attach to lock table (size = 33554432)
E EnqLockTableMapToLocalContext: enque/use_pfclock2 = FALSE
E EnqId_Initialize: local EnqId initialization o.k.
M
M Fri May 16 01:23:40 2014
M *** ERROR => ThPlgConnectToIcm: IcmReadAck failed (-8, ni_rc=-6) [thxxplg.c 5172]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11348]
M
M Info for wp 0
M
M pid = 7668
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = 0
M req.rq_id = 65535
M req.rq_source =
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len 0 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7668) [dpnttool.c 339]
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "721"
sysno 00
sid PRD
systemid 562 (PC with Windows NT)
relno 7210
patchlevel 0
patchno 100
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
pid 4924
kernel runs with dp version 137000(ext=119000) (@(#) DPLIB-INT-VERSION-137000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4924) [dpxxdisp.c 1314]
shared lib "dw_xml.dll" version 100 successfully loaded
shared lib "dw_xtc.dll" version 100 successfully loaded
shared lib "dw_stl.dll" version 100 successfully loaded
shared lib "dw_gui.dll" version 100 successfully loaded
shared lib "dw_mdm.dll" version 100 successfully loaded
shared lib "dw_rndrt.dll" version 100 successfully loaded
shared lib "dw_abp.dll" version 100 successfully loaded
shared lib "dw_sym.dll" version 100 successfully loaded
shared lib "dw_aci.dll" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Fri May 16 01:23:12 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6438]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >SAPERP_PRD_00 <
DpShMCreate: sizeof(wp_adm) 42864 (2256)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
DpShMCreate: sizeof(comm_adm) 1384080 (2744)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2160)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000005460050, size: 7174832)
DpShMCreate: allocated sys_adm at 0000000005460060
DpShMCreate: allocated wp_adm_list at 00000000054630B0
DpShMCreate: allocated wp_adm at 00000000054632A0
DpShMCreate: allocated tm_adm_list at 000000000546DA20
DpShMCreate: allocated tm_adm at 000000000546DA70
DpShMCreate: allocated wp_ca_adm at 00000000059B0980
DpShMCreate: allocated appc_ca_adm at 00000000059C0390
DpShMCreate: allocated comm_adm at 00000000059CFDA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000005B21C40
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 0000000005B21CF0
DpShMCreate: allocated j2ee_adm at 0000000005B21D30
DpShMCreate: allocated ca_info at 0000000005B22CB0
DpShMCreate: allocated wall_adm at 0000000005B22D40
DpCommAttachTable: attached comm table (header=00000000059CFDA0/ft=00000000059CFDB0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
Fri May 16 01:23:13 2014
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 134981MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 134984MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 33745 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1700]
Fri May 16 01:23:40 2014
***LOG Q0K=> DpMsAttach, mscon ( SAPERP) [dpxxdisp.c 12667]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >SAPERP_PRD_00 <)
DpStartStopMsg: start msg sent
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
*** ERROR => DpIcmMsgProcess: IcmRecMsg (rc=-8,-6) [dpxxdisp.c 19121]
Fri May 16 01:24:20 2014
*** ERROR => DpHdlDeadWp: W0 (pid 7668) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W1 (pid 7456) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W2 (pid 8096) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W3 (pid 4376) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W4 (pid 3000) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W5 (pid 3520) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W6 (pid 7024) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W7 (pid 6172) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W8 (pid 6576) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W9 (pid 7756) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W10 (pid 624) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W11 (pid 7468) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W12 (pid 1176) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W13 (pid 6812) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W14 (pid 6968) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W15 (pid 5036) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W16 (pid 5576) died (severity=0, status=0) [dpxxwp.c 1729]
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:30 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri May 16 07:24:30 2014
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
0 DIA -1 Ended no no 1 0 0 NO_ACTION
1 DIA -1 Ended no no 1 0 0 NO_ACTION
2 DIA -1 Ended no no 1 0 0 NO_ACTION
3 DIA -1 Ended no no 1 0 0 NO_ACTION
4 DIA -1 Ended no no 1 0 0 NO_ACTION
5 DIA -1 Ended no no 1 0 0 NO_ACTION
6 DIA -1 Ended no no 1 0 0 NO_ACTION
7 DIA -1 Ended no no 1 0 0 NO_ACTION
8 DIA -1 Ended no no 1 0 0 NO_ACTION
9 DIA -1 Ended no no 1 0 0 NO_ACTION
10 UPD -1 Ended no no 1 0 0 NO_ACTION
11 ENQ -1 Ended no no 1 0 0 NO_ACTION
12 BTC -1 Ended no no 1 0 0 NO_ACTION
13 BTC -1 Ended no no 1 0 0 NO_ACTION
14 BTC -1 Ended no no 1 0 0 NO_ACTION
15 SPO -1 Ended no no 1 0 0 NO_ACTION
16 UP2 -1 Ended no no 1 0 0 NO_ACTION
Dispatcher Queue Statistics Fri May 16 07:24:30 2014
===========================
+------+--------+--------+--------+------------+------------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+------------+------------+
| NOWP | 1 | 33 | 2000 | 43 | 42 |
+------+--------+--------+--------+------------+------------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+------------+------------+
| UPD | 1 | 1 | 2000 | 1 | 0 |
+------+--------+--------+--------+------------+------------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
max_rq_id 40
wake_evt_udp_now 0
wake events total 40, udp 5 ( 12%), shm 35 ( 87%)
since last update total 40, udp 5 ( 12%), shm 35 ( 87%)
DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[1] = 0.055556 / -1.000000 %
Dispatcher Load Statistics
+------+---------+---------+---------+
| Typ | LA1 | LA5 | LA15 |
+------+---------+---------+---------+
| DIA | 0.000 | 0.000 | 0.056 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[2] = 0.011111 / -1.000000 %
| UPD | 0.000 | 0.000 | 0.011 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
| ENQ | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
| BTC | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
| SPO | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
| UP2 | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
Dump of tm_adm structure: Fri May 16 07:24:30 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T19, U20, , , 01:23:40, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Fri May 16 07:24:30 2014
=============================
Slots: 1000, Used: 2, Max: 46
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | 0xdeadbeef |
| 546 | DISPATCHER | -1 | 0xdeadbeef |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:35 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPERP_PRD_00 < (normal)
DpJ2eeDisableRestart
DpMBufRead: read server list from MBUF (1 entries)
DpMBufMod: name [SAPERP_PRD_00 ], types 191 state 3 (0x0 0x0 0x0 0x0)
DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqIPutIntoQ: put elem in queue DIA, elems=6
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 41)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (7752) (SOFT_KILL)
DpHalt: stop icman
killing process (5940) (SOFT_KILL)
DpHalt: terminate gui connections
send SHUTDOWN to REM TM 19
DpWpBlksLow: wp_blks_in_queue/limit/max = 3/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
return errno (-17) to T19
DpTmSend: errormsg without overhead: use mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
DpTmSend: try to send 14 bytes to T19/M0
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T19 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 25 in set0
SiSelNSet: set events of sock 1440 to: ---
NiBufISelRemove: remove hdl 25 from set0
SiSelNRemove: removed sock 1440 (pos=3)
SiSelNRemove: removed sock 1440
NiSelIRemove: removed hdl 25
DpDelSocketInfo: del info for nihdl 25 (pos/type=3/3)
NiICloseHandle: shutdown and close hdl 25/sock 1440
NiBufIClose: clear extension for hdl 25
dp_tm_adm[19].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1400225080/234000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 19
DpListRemove: remove elem 19 from tmadm_inuse_list
DpListRemove: 19 elems in tmadm_inuse_list
DpListInsert: insert elem 19 into tmadm_free_list (at begin)
DpListInsert: 182 elems in tmadm_free_list
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
[DpProcDied] Process lives (PID:7752 HANDLE:1300)
DpHalt: waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:36 2014
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:7752 HANDLE:1300 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:44 2014
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:5940 HANDLE:1296 rc:0x0) [dpnttool2.c 147]
DpStartStopMsg: send stop message (myname is >SAPERP_PRD_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=SAPERP_PRD_00 , sapsysnr= 0, hostname=SAPERP
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 4
AdCallRegisteredCvtToExt: opcode 4 call 000007F7B2BB1470
AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
DpConvertRequest: net size = 189 bytes
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
MsISnd2: send msg (ms hdr/msg 110/452 bytes) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 17
NiBufReceive starting
MsINiRead: received 274 bytes
MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIRead: read for hdl 17 timed out (0ms)
DpHalt: more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 17 (r)
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 17
NiBufReceive starting
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsISendKeepalive : keepalive sent to message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
Fri May 16 01:24:45 2014
NiIPeek: peek for hdl 17 timed out (r; 1000ms)
NiIRead: read for hdl 17 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 13064]
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server (SAPERP / 3900)
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 17 in set0
SiSelNSet: set events of sock 1400 to: ---
NiBufISelRemove: remove hdl 17 from set0
SiSelNRemove: removed sock 1400 (pos=2)
SiSelNRemove: removed sock 1400
NiSelIRemove: removed hdl 17
DpDelSocketInfo: del info for nihdl 17 (pos/type=2/4)
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 3/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqIPutIntoQ: put elem in queue DIA, elems=7
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 44)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 17/sock 1400
NiBufIClose: clear extension for hdl 17
MsIDetach: detach MS-system (SAPERP / 3900)
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4924) [dpxxdisp.c 11574]
DpHalt: Good Bye .....
SAPSTARTSRV
trc file: "sapstartsrv.log", trc level: 0, release: "721"
pid 6196
[Thr 6528] Fri May 16 00:38:09 2014
SAP HA Trace: SAP Microsoft Cluster library '721, patch 100, changelist 1397439' initialized
CCMS agent initialization for instance type ABAP: return code 0.
CCMS agent start: return code 0.
Initializing SAPControl Webservice
Starting AutoRestart thread
AutoRestart thread started, version check is enabled
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port \\.\pipe\sapcontrol_00
Webservice thread started, listening on port 50013
\sapadmin is starting SAP System at 2014/05/16 0:38:18
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\sapadmin is stopping SAP System at 2014/05/16 0:49:10
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\sapadmin is starting SAP System at 2014/05/16 0:50:47
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\sapadmin is stopping SAP System at 2014/05/16 1:21:22
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\prdadm is starting SAP System at 2014/05/16 1:23:04
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]Hi Alwina, here is the DEV_ICM trace:
From this trace, it appears that it is listening to 65000?
Netstat shows that the system is listening to 127.0.0.1:65000 .
Other SAP ports show listening on 0:0:0:0:xxxx , is ICM listening on 127 a problem?
trc file: "dev_icm", trc level: 1, release: "721"
sysno 00
sid PRD
systemid 562 (PC with Windows NT)
relno 7210
patchlevel 0
patchno 43
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
pid 5940
[Thr 1812] Fri May 16 01:23:13 2014
[Thr 1812] Parameter system/type has value: "ABAP"
[Thr 1812] started security log to file ./dev_icm_sec
[Thr 1812] ICM running on:
[Thr 1812] MtxInit: 30001 0 2
[Thr 1812] ***LOG IM1=> IcmInit, Startup (ICM&SAPERP.CORP.CANSEL.CA&5940&) [icxxman.c 1934]
[Thr 1812] IcmInit: listening to admin port: 65000
[Thr 1812] DpSysAdmExtCreate: ABAP is active
[Thr 1812] DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
[Thr 1812] DpIPCInit2: read dp-profile-values from sys_adm_ext
[Thr 1812] DpShMCreate: sizeof(wp_adm) 42864 (2256)
[Thr 1812] DpShMCreate: sizeof(tm_adm) 5517056 (27448)
[Thr 1812] DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
[Thr 1812] DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
[Thr 1812] DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
[Thr 1812] DpShMCreate: sizeof(comm_adm) 1384080 (2744)
[Thr 1812] DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
[Thr 1812] DpShMCreate: sizeof(slock_adm) 0 (296)
[Thr 1812] DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
[Thr 1812] DpShMCreate: sizeof(file_adm) 0 (80)
[Thr 1812] DpShMCreate: sizeof(vmc_adm) 0 (2160)
[Thr 1812] DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
[Thr 1812] DpShMCreate: sizeof(gw_adm) 48
[Thr 1812] DpShMCreate: sizeof(j2ee_adm) 3952
[Thr 1812] DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000022F0050, size: 7174832)
[Thr 1812] DpShMCreate: allocated sys_adm at 00000000022F0060
[Thr 1812] DpShMCreate: allocated wp_adm_list at 00000000022F30B0
[Thr 1812] DpShMCreate: allocated wp_adm at 00000000022F32A0
[Thr 1812] DpShMCreate: allocated tm_adm_list at 00000000022FDA20
[Thr 1812] DpShMCreate: allocated tm_adm at 00000000022FDA70
[Thr 1812] DpShMCreate: allocated wp_ca_adm at 0000000002840980
[Thr 1812] DpShMCreate: allocated appc_ca_adm at 0000000002850390
[Thr 1812] DpShMCreate: allocated comm_adm at 000000000285FDA0
[Thr 1812] DpShMCreate: system runs without slock table
[Thr 1812] DpShMCreate: system runs without file table
[Thr 1812] DpShMCreate: allocated vmc_adm_list at 00000000029B1C40
[Thr 1812] DpShMCreate: system runs without vmc_adm
[Thr 1812] DpShMCreate: allocated gw_adm at 00000000029B1CF0
[Thr 1812] DpShMCreate: allocated j2ee_adm at 00000000029B1D30
[Thr 1812] DpShMCreate: allocated ca_info at 00000000029B2CB0
[Thr 1812] DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
[Thr 1812] MPI: dynamic quotas disabled.
[Thr 1812] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
[Thr 1812] CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
[Thr 1812] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
[Thr 1812] Fri May 16 01:23:14 2014
[Thr 1812] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
[Thr 1812] IcmCreateWorkerThreads: created worker thread 0
[Thr 1812] IcmCreateWorkerThreads: created worker thread 1
[Thr 1812] IcmCreateWorkerThreads: created worker thread 2
[Thr 6912] IcmProxyWatchDog: proxy watchdog started
[Thr 1812] IcmCreateWorkerThreads: created worker thread 3
[Thr 1812] IcmCreateWorkerThreads: created worker thread 4
[Thr 1812] IcmCreateWorkerThreads: created worker thread 5
[Thr 1812] IcmCreateWorkerThreads: created worker thread 6
[Thr 1812] IcmCreateWorkerThreads: created worker thread 7
[Thr 1812] IcmCreateWorkerThreads: created worker thread 8
[Thr 1812] IcmCreateWorkerThreads: created worker thread 9
[Thr 4024] IcmMpiWatchDogThread: MPI watchdog started
[Thr 4400] IcmWatchDogThread: watchdog started
[Thr 6524] HttpISubHandlerAdd: Added handler HttpFileAccessHandler(000000000C2E2750), slot=0, flags=4098) for /sap/public/icmandir/, active: 1, table 000000000C2E24C0
[Thr 6524] ISC: created 400 MB disk cache.
[Thr 6524] ISC: created 50 MB memory cache.
[Thr 6524] HttpISubHandlerAdd: Added handler HttpCacheHandler(000000000C3EB4B0), slot=1, flags=12293) for /, active: 1, table 000000000C2E24C0
[Thr 6524] HttpExtractArchive: files from archive E:\usr\sap\PRD\DVEBMGS00\exe/icmadmin.SAR in directory E:/usr/sap/PRD/DVEBMGS00/data/icmandir are up to date
[Thr 6524] HttpISubHandlerAdd: Added handler HttpAdminHandler(000000000C461480), slot=2, flags=36869) for /sap/admin, active: 1, table 000000000C2E24C0
[Thr 6524] HttpISubHandlerAdd: Added handler HttpModHandler(000000000C461570), slot=3, flags=12293) for /, active: 1, table 000000000C2E24C0
[Thr 6524] CsiInit(): Initializing the Content Scan Interface
[Thr 6524] PC with Windows NT (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)
[Thr 6524] CsiInit(): CSA_LIB = "E:\usr\sap\PRD\DVEBMGS00\exe\sapcsa.dll"
[Thr 6524] HttpISubHandlerAdd: Added handler HttpAuthHandler(000000000C4615F0), slot=4, flags=12293) for /, active: 1, table 000000000C2E24C0
[Thr 6524] HttpISubHandlerAdd: Added handler HttpSAPR3Handler(000000000C4AFAE0), slot=5, flags=1052677) for /, active: 1, table 000000000C2E24C0
[Thr 6524] Started service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 6524] Started service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
[Thr 6524] Fri May 16 01:23:18 2014
[Thr 6524] IcmNetCheck: network check passed without detecting problems
[Thr 4268] Fri May 16 01:23:24 2014
[Thr 4268] HttpExtractArchive: files from archive E:\usr\sap\PRD\DVEBMGS00\exe/ITS.SAR in directory E:/usr/sap/PRD/DVEBMGS00/data/icmandir are up to date
[Thr 8156] Fri May 16 01:24:14 2014
[Thr 8156] *** WARNING => IcmCallAllSchedules: Schedule func 1 already running - avoid recursion [icxxsched.c 481]
[Thr 5948] Fri May 16 01:24:24 2014
[Thr 5948] *** WARNING => IcmJ2EEScheduleFunc: Cannot access "/sap/public/icman" (rc=500)- please check node in TA sicf [icxxman.c 2598]
[Thr 6912] Fri May 16 01:24:44 2014
[Thr 6912] IcmProxyWatchDog: Shutdown request received
[Thr 4400] IcmWatchDogThread: Shutdown request received
[Thr 6912] *** IcmProxyWatchDog: exit thread ***
[Thr 4024] *** IcmMpiWatchDogThread: exit thread ***
[Thr 4400] *** IcmWatchDogThread: exit thread ***
[Thr 1812] IcmLoop: Shutdown request received
[Thr 1812] Deactivated service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 1812] Deactivated service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
[Thr 1812] Removed service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 1812] Removed service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
[Thr 1812] *** ICM shutdown completed (pid: 5940) *** -
SAP Disp+work stop immediately after startup
I am using SAP ECC 6.0 on windows with DB2 9.5 database. it was working few days back but after restarting the SAP this problem started. Following is the dev_disp log:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid P01
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 4552
Sun Jul 13 13:57:27 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 4552) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun Jul 13 13:57:32 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >aemsergnprd_P01_01 <
DpShMCreate: sizeof(wp_adm) 19248 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE80050, size: 6342672)
DpShMCreate: allocated sys_adm at 000000000EE80050
DpShMCreate: allocated wp_adm at 000000000EE82150
DpShMCreate: allocated tm_adm_list at 000000000EE86C80
DpShMCreate: allocated tm_adm at 000000000EE86CE0
DpShMCreate: allocated wp_ca_adm at 000000000F3EAB80
DpShMCreate: allocated appc_ca_adm at 000000000F3F0940
DpShMCreate: allocated comm_adm at 000000000F3F2880
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F479510
DpShMCreate: allocated gw_adm at 000000000F479590
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F4795C0
DpShMCreate: allocated wall_adm at 000000000F4795D0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( aemsergnprd) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >aemsergnprd_P01_01 <)
DpStartStopMsg: start msg sent
Sun Jul 13 13:57:33 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Sun Jul 13 13:58:12 2008
ERROR => DpHdlDeadWp: W0 (pid 2456) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 740) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 1488) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 3960) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 4668) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 468) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W6 (pid 4560) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W7 (pid 720) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W8 (pid 4676) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 3208) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W10 (pid 1120) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W11 (pid 5100) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W12 (pid 3616) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:22 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sun Jul 13 05:58:22 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2456 Ended no 1 0 0
1 DIA 740 Ended no 1 0 0
2 DIA 1488 Ended no 1 0 0
3 DIA 3960 Ended no 1 0 0
4 DIA 4668 Ended no 1 0 0
5 DIA 468 Ended no 1 0 0
6 UPD 4560 Ended no 1 0 0
7 ENQ 720 Ended no 1 0 0
8 BTC 4676 Ended no 1 0 0
9 BTC 3208 Ended no 1 0 0
10 BTC 1120 Ended no 1 0 0
11 SPO 5100 Ended no 1 0 0
12 UP2 3616 Ended no 1 0 0
Dispatcher Queue Statistics Sun Jul 13 05:58:22 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Sun Jul 13 05:58:22 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sun Jul 13 05:58:22 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:27 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >aemsergnprd_P01_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2116) (SOFT_KILL)
Stop icman
killing process (916) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2116 HANDLE:420)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:28 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2116 HANDLE:420)
wait for end of icman
[DpProcDied] Process lives (PID:916 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:29 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:916 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:916 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:31 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:916 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:32 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:916 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:33 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:916 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:34 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:916 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:35 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:916 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:916 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:916 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:916 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 13:58:39 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:916 HANDLE:432)
DpStartStopMsg: send stop message (myname is >aemsergnprd_P01_01 <)
NiIMyHostName: hostname = 'aemsergnprd'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Sun Jul 13 13:58:40 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 356 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 356 (pos=2)
SiSelNRemove: removed sock 356
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 356
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4552) [dpxxdisp.c 10421]
Good Bye .....developer trace file:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid P01
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2432
Sun Jul 13 17:12:24 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2432) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun Jul 13 17:12:28 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >aemsergnprd_P01_01 <
DpShMCreate: sizeof(wp_adm) 19248 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE80050, size: 6342672)
DpShMCreate: allocated sys_adm at 000000000EE80050
DpShMCreate: allocated wp_adm at 000000000EE82150
DpShMCreate: allocated tm_adm_list at 000000000EE86C80
DpShMCreate: allocated tm_adm at 000000000EE86CE0
DpShMCreate: allocated wp_ca_adm at 000000000F3EAB80
DpShMCreate: allocated appc_ca_adm at 000000000F3F0940
DpShMCreate: allocated comm_adm at 000000000F3F2880
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F479510
DpShMCreate: allocated gw_adm at 000000000F479590
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F4795C0
DpShMCreate: allocated wall_adm at 000000000F4795D0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Sun Jul 13 17:12:29 2008
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( aemsergnprd) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >aemsergnprd_P01_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Sun Jul 13 17:12:30 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Sun Jul 13 17:13:09 2008
ERROR => DpHdlDeadWp: W0 (pid 900) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 2976) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 2980) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 2952) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 3040) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 3016) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W6 (pid 2788) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W7 (pid 740) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W8 (pid 2892) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 1676) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W10 (pid 428) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W11 (pid 1744) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W12 (pid 1824) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:19 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sun Jul 13 09:13:19 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 900 Ended no 1 0 0
1 DIA 2976 Ended no 1 0 0
2 DIA 2980 Ended no 1 0 0
3 DIA 2952 Ended no 1 0 0
4 DIA 3040 Ended no 1 0 0
5 DIA 3016 Ended no 1 0 0
6 UPD 2788 Ended no 1 0 0
7 ENQ 740 Ended no 1 0 0
8 BTC 2892 Ended no 1 0 0
9 BTC 1676 Ended no 1 0 0
10 BTC 428 Ended no 1 0 0
11 SPO 1744 Ended no 1 0 0
12 UP2 1824 Ended no 1 0 0
Dispatcher Queue Statistics Sun Jul 13 09:13:19 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Sun Jul 13 09:13:19 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sun Jul 13 09:13:19 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:24 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >aemsergnprd_P01_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2932) (SOFT_KILL)
Stop icman
killing process (2876) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2932 HANDLE:420)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:25 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2932 HANDLE:420)
wait for end of icman
[DpProcDied] Process lives (PID:2876 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:26 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2876 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:27 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2876 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:28 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2876 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:29 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2876 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2876 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:31 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2876 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:32 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2876 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:33 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2876 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:34 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2876 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:35 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2876 HANDLE:432)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=457
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 13 17:13:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2876 HANDLE:432)
DpStartStopMsg: send stop message (myname is >aemsergnprd_P01_01 <)
NiIMyHostName: hostname = 'aemsergnprd'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Sun Jul 13 17:13:37 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 356 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 356 (pos=2)
SiSelNRemove: removed sock 356
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 356
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2432) [dpxxdisp.c 10421]
Good Bye .....
Maybe you are looking for
-
Looking for a device. Need suggestions
Looking for a reasonably priced device that will allow me to plug in at least one usb mic, (ideally 2 in the future), and a headphone jack so two people can listen. I have headphone splitters. I'd like to record right into Garageband. Let me know. Th
-
New Yoga 13 owner - gaming info.
Hi all, Got my Yoga 13 in the week. After a lot of research and countless hours watching videos about the 2-3 hybrids I was interested in, I finally plumped for the Yoga. Haven't regretted my choice, absolute love it! I work as a web developer, so my
-
Why can't I import .jpg files into PRE 9 slideshow project?
I have a Windows 7 computer and use Photoshop Elements 9 and Premiere Elements 9. I recently completed a slideshow for my father's 90th birthday in Photoshop Elements that contains about 360 photos, 12 songs/partial songs, and lasts 24 minutes. My
-
Native library NOT thread safe - how to use it via JNI?
Hello, has anybody ever tried to use a native library from JNI, when the library is not thread safe? The library (Windows DLL) was up to now used in an MFC App and thus was only used by one user - that meant one thread - at a time. Now we would like
-
Hello everyone, Recently my installation of lightroom has stopped loading giving this error message: Adobe Photoshop Lightroom 5 cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop Lightroom 5 works with this