Solution Manager 4.0 Presentation

I need to give a presentation on Solman 4.0.
Does anybody have any sort of multimedia presentation handy...or PDFs etc.
Please reply or point me to a link...preferrably a Powerpoint presentation.
Thanks
Pree

Hi Pree,
SAP Service Marketplace provides many presentations on SAP Solution Manager. File format is in general .pdf
http://www.service.sap.com/solutionmanager
-> Media Library
> Overview Presentations
.........SAP Solution Manager - Overview (.pdf)
.........SAP Solution Manager - Scenarios (.pdf)
> Use Case Presentations
.........detailed presentations on each use case
Best regards
Ruediger Stoecker

Similar Messages

  • SAP_APPL for solution manager

    Hi all,
    we tried for the integration of ECATT with QTP, and we used solution manager for ECATT execution.
    we found that QTP is not started from Solman as we miss the component SAP_APPL in solution manager but is present in ECC system.
    For this integration to happen, can we install SAP_APPL in solman.
    Kindly advice,
    Thanks,
    Subhashini.

    Hi all,
    The Automation is achieved...by making an entry in the SOLE transaction for the automation.
    there is no requirement for SAP_APPL component.
    I am closing the thread.
    Thanks,
    Subhashini.

  • Syncronizing two Solutions Manager with One SLD

    Hello Experts, we have this issue: I am having one Central SLD  in PI and one productive Solution Manager (new one) that is pointing to that SLD, for incidents we are managing another ¨productive¨Solution Manager (old one) . There is a new system that I need it in my SMSY in my old Solution Manager and the best way to do it would be to point that old Solman to the same SLD that the new one is pointing. my question is: I only have to set the SLD in the old solution manager in the RZ70 and add that Solution Manager in the Central SLD?, so I would end with two solution manager pointing the same Central SLD, it doesnt mess with my new productive Solution Manager SMSY?, I want to be sure that some trash data in the old Solution Manager wont be present in the new Solman that is pointing the Central SLD right now.
    Best Regards,
    Paul

    Dear Mr. Paul,
    There are few things to understand:
    1. RZ70 is used to feed SLD with system information.
    2. landscape fetch job need to be scheduled within Solution manager system to update SMSY with the latest information available in SLD which you have configured during SOLMAN_SETUP.
    Here with your description it is clear that you have central SLD at your PI system and your both Solution manager system ( New and Old) are connected to the central SLD.
    Here what I understand if you want to add a new system say X in SMSY of your old solution manager.
    In order to do so you need to configure your new system to the central SLD using RZ70. Once you did this, system details of your new system would be available with central SLD.
    Now in next step to make that system available to your old solution manager, you need to rerun the smsy_setup job. This will referesh your SMSY and new system would be available in SMSY of your OLD solution manager.
    In this case there is a catch. Since you have added the system to the central SLD, the new system X would also appears in the SMSY of your new Solution Manager as well once SMSY of new solman gets refreshed.
    So if you just want to add this new system X to SMSY of your old solution manager only and not to the new one, you can add this system to the local SLD of old solution manager only not to the central SLD.
    Also you need not to worry about the trash data available in your Old solution manager. It would not effect the central SLD if your local SLD of old solution manager is not synch with central SLD.
    Regards,
    Sachin

  • FREE SAP Solution Manager Simulations, eBooks and Presentations

    Learning on Demand by SAP ([LoD|https://lod.sdn.sap.com/]) has recently been updated with approximately 100 FREE Simulations and eBooks, some of which relate to SAP Solution Manager. SAP Simulations and eBooks are a convenient way of obtaining SAP training on new topics or updating your existing knowledge on new product releases.
    Examples of the free Solution Manager elearning resources available on LoD include:
    - SAP Solution Manager Use Cases
    - Global Roll-out
    - Sizing SAP Solution Manager
    Click [FREE SAP elearning content|https://cart.lod.sdn.sap.com/pages/FreeContent/lod_free_courses.htm] to review the new elearning content and start Learning Now!

    Hi Shane,
                      Thanx for sharing the information.
    Regards
    Spree

  • Service desk issue in Solution manager

    Dear Friend's
    I have configured Service desk in our Solution manager .
    Solution manager version is 7.0 , on windows 2003 & oracle 10.2.0.2.0.
    I am able create messages in our satilite systems . And sending to solution manager also.
    Here issue is , when I click on send button in created message box , then our satilite system will asking password of basis user , which is present in solution manager. If I entered that password then It shows successfully send message with number.
    I want's to skip the screen , where it's asking the basis user ,password.  
    So please give me solution , If you come across this problem.
    Thanks  in advance,
    R.k sindol
    Edited by: Raj kumar sindol on Jan 20, 2009 3:30 PM

    Hello Raj,
    see SAP Note [153743|https://service.sap.com/sap/support/notes/153743] chapter "In the R/3 system of the notifier (customer data entry systems).". Changing that RFC destination should be the solution for your case.
    Best regards,
      Andreas

  • The URL in Solution Manager for SRM Standard Configuration

    Hi Experts,
    We all know that after SRM 5.0, all standard configuration guid are presented as URL in SAP Solution Manager like below:
    http://help.sap.com/SCENARIOS_BUS2005/helpdata/EN/ac/136341acd3001de10000000a155106/frameset.htm
    My question is: is there any other way to find these configuration url? If I don't have solution manager enviroment, how can I find these urls? Many thanks.

    Hi Dinesh,
    Thank you for your reply.  I checked this site before(maybe one year ago). At that time, there was no configuration guide for 5.0. Now it's great...
    My question is there any place contained those urls in solution manager. I can't find those urls in any configuration guide. SAP make such a configuration online help, why it doesn't open for those peopel who don't use solution manager. It confused me...
    Anyway, thank you very much for your reply.

  • How to add enterprise Portal in Solution manager

    Hello,
    I wanted to add the enterprise Portal system in Solution manager ( for Service desk ) in SMSY.
    Can anybody guide me how can I add the EP( enterprise portal system) in Solution manager
    Regards,

    Hello,
    What is your SLD look like?
    You have to connect the EP to SLD and use the LANDSCAPE FETCH job to import to SMSY - Txn SMSY_SETUP - Source SLD.
    Now the non abap system data present in the SLD will be reflected in SMSY.
    Refer below threads:
    How to define an enterprise portal system(JAVA) in SMSY in solution manager
    Re: Creation of solution for J2EE system
    How insert Enterprise portal in Solution Manager
    Regards
    Vivek

  • New Partner Function in CRM (Solution Manager Service Desk)

    Hi CRM Gurus!,
      Even if this problem is present in my Solution Manager Service Desk I'm creating this thread here in CRM Forum because I thin'k I need the experience of one CRM Expert. Í´ve created this question in Solution Manager Forum also but I hadn´t solved my problem yet.
    We add the partner function called "Additional Partner", but I don't know why in the tab "Partners" in the CRM transaction we want to add a new partner but in the partners combo the new one does not appear in the list.
    The procedure that I did was: I created a new business partner function and I added this new function to my partner determination procedure, then in SPRO: "Define Partner Determination Procedures" -> I set the option "Only Functions Assigned in Procedure". 
    These are the values. fro my new function:
    Function: ZSLFN004
    Text: Additional Processor
    Abbrev.: ZAMS
    Function Cat.: 0008 Person Responsible
    Usage: CRM Customer Relationship Managem.
    Relatshp Cat: CRMH06 Is Responsible BP For
    The partner functions in my procedure are:
    00000001 Sold-To Party (CRM)
    00000046 Approved by (CRM)
    SLFN0001 System Administrator (CRM)
    SLFN0002 Reported by (CRM)
    SLFN0003 Support Team (CRM)
    SLFN0004 Message Processor (CRM)
    ZSLFN004 Additional Processor (CRM)
    But in the transactions when I try to add a new partner in the partners tab only the follow functions appears in the combo:
    00000001 Sold-To Party (CRM)
    00000046 Approved by (CRM)
    SLFN0001 System Administrator (CRM)
    SLFN0002 Reported by (CRM)
    SLFN0003 Support Team (CRM)
    SLFN0004 Message Processor (CRM)
    I don't know why my ZSLFN004 is not listed in the combo.
    By the way, my function was created as a copy of SLFN0004.
    Any help would be appreciated.
    Regards
    Gustavo Balboa

    Hi Vishant,
      Thanks for your answer, but some one in the Solution Manager forum gave me the answer few minutes ago :). The problem was that in some transaction types (I don't know wich ones or if it aplies to all) the category 0008 - Person Responsible can only appear once, my partner function was a copy of the function SLFN0004 - Message Processor and that function is defined with the category 0008, so I had 2 partner functions defined in the category 0008.
    To solve the problem I just adjust my Z function and put the category 0016 - Service Team and let the relationship empty. Then the partner function is now showing in the combo at partners tab.
    Again, thanks anyway for the time that you take to answer my question.
    Regards
    Gustavo Balboa

  • Solution Manager enterprise edition.

    Hi, all, How can I check if my version of solution manager is stardart or enterprise edition.
    I need that information  because in one of the presentation slides of the enterprise service "SAP Modification Justification Check"-
    The prerrequisites are.
    "Sap Solution Manager Enterprise Edition Must be available". Scope and Architecture of bussiness processes must be documented according to the Minimum Documentation standard.
    The solution manager enterprise edition have any special component in system -> status??? or how can i check if i have the enterprise edition of SOLMAN..
    Thanks.

    Thanks a lot, i realize the installation following the standard add-on installation procedure!
    Now i have the ST-ETP
    ST     400     0024     SAPKITL434     SAP Solution Manager Tool
    ST-A/PI     01M_CRM570     0000     -     Application Servicetools for CRM 500 - 7
    ST-ETP     100     0000     -     SAP Solution Manager Enterprise Edition
    ST-ICO     150_700     0025     SAPK-1507PINSTPL     SAP Solution Manager Implementation Cont
    ST-LV     100     0001     SAPK-10001INSTLV     SAP Landscape Verification Wizard
    ST-SER     701_2010_1     0002     SAPKITLOS2     SAP Solution Manager Service Tools
    Then don't forget to perform step 5. After the installation steps.
    Step 5 says this:
    5. After the installation
                  To activate SAP Solution Manager Enterprise Edition, the Enterprise Addon SM_APPLM has to be activated in the IMG of the Solution Manager System. This is done via IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate Solution Manager Enhancements.
                a) In the case of ST-400 SP15-SP17
                To use Extended Tracebility in Change Request Management activate BC-Set SOLMAN40_CHARM_CONTEXT_001 in transaction SCPR20
                b) In the case of ST-400 SP18 or higher
                The activation of BC-Set SOLMAN40_CHARM_CONTEXT_001 will be done automatically.
    In my spro i don't have this options->
    I see the route Activate Solution Manager Enhacements in  SPRO -> Cross Scenario Settings
    And in enterprise extension I only see ( SM_CRON, SM_QC_AD, SM_SSP,SM_SUPP_VAR)
    I guess that this in SP24 is done automatically, but you said, that don´t forget the step 5 after installation.
    update:I check for updates of SP and this add-on don´t have SP for now

  • SMD Configuration on MDM 7.1 with Solution Manager 7.01 SP19

    Hi,
    Kindly let me know if someone has faced issue with configuring SMD on SMD 7.1 with Solution Manager 7.01 SP19. Presently I have configured that and System is being shown in Wily Introscope Webview but Saposcol is greyed out in that.
    Also system is not showing any data in Introscope Dashboard. Any guess for this?
    Earlier while I was configuring SMD, error related to null installation directory (...Invalid root directory: /usr/sap/SID/null ) were occuring. After that when I created a softlink for saposcol service from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe.
    Still no data and still in SMD Agent logs saposcol service warning is there.
    Thanks & Regards,
    Manish Singh

    Hi Jansi,
    Thanks for the reply..
    Here is our scenario. SAPOSCOL was not there in /usr/sap/SMD/SMDA97/exe first place. So I made the softlink from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe and than re-ran setup again but still of no use.
    Our Soltuion Manager saposcol version and MDM saposcol version is same. Below is the SMD Agent log of MDM server:
    Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Error      com.sap.smd.wily.hostagent.config.AgentConfigVO - finalizeDestination(): Initialization failed
    [EXCEPTION]
    com.sap.smd.wily.hostagent.PermanentException: Error: cannot connect to destination SapHostControl_Default. Probably saphostctrl is not installed. This error can be ignored if saposcol is available.
    at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:98)
    at com.sap.smd.wily.hostagent.config.AgentConfigVO.finalizeDestination(AgentConfigVO.java:85)
    at com.sap.smd.wily.hostagent.config.AgentConfigXmlHandler.endElement(AgentConfigXmlHandler.java:174)
    at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:156)
    at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1953)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1846)
    at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2442)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1843)
    at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2845)
    at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:165)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
    at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:260)
    at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:271)
    at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
    at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
    at com.sap.smd.wily.hostagent.config.AgentConfigParser.parseXml(AgentConfigParser.java:59)
    at com.sap.smd.wily.hostagent.SapAgent.loadConfiguration(SapAgent.java:430)
    at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:93)
    at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
    at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
    at java.lang.Thread.run(Thread.java:664)
    Caused by: javax.xml.rpc.soap.SOAPFaultException: Method 'SOAP-ENV:Envelope' not implemented: method name or namespace not recognized
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.buildFaultException(MimeHttpBinding.java:747)
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.processDocumentFault(MimeHttpBinding.java:870)
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1451)
    at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:142)
    at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:157)
    at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:94)
    ... 25 more
    Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Warning    com.sap.smd.wily.hostagent.SapAgent - startActions(): Action SAPOsColWs
    [EXCEPTION]
    com.sap.smd.wily.hostagent.TransientException: Destination not available:SapHostControl_Default
    at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlAction.init(SapHostControlAction.java:74)
    at com.sap.smd.wily.hostagent.SapAgent.startActions(SapAgent.java:396)
    at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:94)
    at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
    at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
    at java.lang.Thread.run(Thread.java:664)
    Apr 20, 2011 2:36:20 PM [Thread[Thread-22,5,main]] Warning    com.sap.smd.wily.hostagent.action.SapOsColAction - launchDaemon(): saposcol exited with 255***********************************************************************
    This is Saposcol Version COLL 21.01 711 - AIX v12.01 5L-64 bit 090324
    Usage:  saposcol -l: Start OS Collector
            saposcol -k: Stop  OS Collector
            saposcol -d: OS Collector Dialog Mode
            saposcol -s: OS Collector Status
    The OS Collector (PID 1552388) is already running .....
    Apr 20, 2011 2:36:23 PM [Thread[SAPOsCol,5,main]] Error      com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action throws exception, will be terminated: SAPOsCol
    [EXCEPTION]
    java.lang.NullPointerException:
    at com.sap.smd.wily.hostagent.action.SapOsColAction.reportProperty(SapOsColAction.java:293)
    at com.sap.smd.wily.hostagent.action.SapOsColAction.dumpSection(SapOsColAction.java:239)
    at com.sap.smd.wily.hostagent.action.SapOsColAction.processXml(SapOsColAction.java:164)
    at com.sap.smd.wily.hostagent.action.SapOsColAction.doRun(SapOsColAction.java:417)
    at com.sap.smd.wily.hostagent.action.AbstractAction.run(AbstractAction.java:53)
    at com.wily.EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:728)
    at java.lang.Thread.run(Thread.java:664)
    Our MDM is 7.1 version and Solution Manager is 7.01 (EHP1) with SP19 so we should configure our MDM system as 7.1 version which we did but still data is not coming in Wily properly. Its not showing SID name under the hostname in Wily Introscope and neither is MDM Servers (Master Data Import Server, Master Data Server & Master Data Syndication Server under SID).
    Now the interesting thing is that if we configure our MDM server as 5.5 version with Solution Manager and do the configuration than its showing in Wily but in that case MDM Cockpit doesn't work.
    We want both to work Wily as welll as MDM Cockpit since our MDM and Solman version matches for both configuration.
    Any ides or help steps to do that?
    Thanks,
    Manish Singh

  • RFC problem (CTS with Solution Manager)

    Hi everybody,
    I'm configuring a transport landscape with Solman.
    For demo purpose I created 3 clients in a Sandbox system (SBX), which should function like a 3-system-landscape. I created a transport domain in Solman (SM1) and added SBX into the domain (SM1 and SBX are not in one transport directory). The transport routes are configured from SBX:810 - SBX:820 - SBX:830. After I distributed the configuration, I can also see routes in SBX.
    I also used SOLMAN_SETUP to generate the RFC connections to every client (READ and TMW), also to SBX:000 and SM1:000.
    Then I created a Solman Project and wanted to configure the IMG-Project in "System Landscape" tab (so that I can use this project for CTS). But as I tried to create the IMG, I got an error:
    S:No RFC authorization:000  function module SPROJECT_CREATE_NO_DIA_R.
    Message no. No RFC authorization000
    Can somebody give me a hint?
    Another problem is, I created a customizing request and a workbench request in SBX:810, I can see them in SE09 in SBX, but in SM1 I cannot see them! I also don't understand here...
    I'd preciate any help from you!

    Hello Charlie
    Seeing all the STMS queus in Solution Manager is no problem. The way we have set it up is that the Solution Manager is the TMS domain controller and all systems are included into the TMS domain of the Solution Manager.
    That makes the STMS queues of the managed SAP systems visible in transaction STMS.
    About two years ago SAP showed plans for a new layer for CTS called CCTS (central CTS) which would only be available on Solution Manager and it's purpose would be even more features and central transport request management. However CCTS has vanished from the radar. It's no longer mentioned and at SAP TechED 2011 it was nowhere to be found.
    Using CHARM the idea is also that person X creates a request which then a developer Y can use to insert objects into. Why? Segregation of duties is the answer. Creating a request is always done in the managed SAP system, using RFC you will jump to SE01 or another respective transaction to create the request.
    QGM and CHARM add another layer (control) on top of CTS, that's how you should visualize it. If you look up presentations on CCTS you will be able to visualy see that.
    You can read up on CHARM on https://service.sap.com/solutionmanager
    There are also interesting SAPPress books available
    The customizing option is to be found in SE09 I believe but I'll check tomorrow and update this reply because I'm on my iPad now without SAP system available.
    The obligation is then you must have an IMG_Project in your managed SAP system that has been CTS enabled. Creating such an img project is easy, transaction spro_admin, fill in title, save, go to tab transport request (or something) and enable the project for CTS.
    Kind regards
    Tom

  • System Monitoring with Solution Manager Ehp1

    Hi,
    I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
    Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
    Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
    when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
    <SID>_RZ20_COLLECT
    <SID>_RZ20_ANALYZE
    I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
    <SID>_RZ20_COLLECT_123539Error when opening an RFC connection
    Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
    Error during remote call of SALC function: Error when opening an RFC connection
    Error during remote call of RFC1 function: Error when opening an RFC connection
    I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
    Please, Could you help me?
    Thanks and regards,
    Tomas.

    Tomas,
    I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system).  I downloaded the lates ccmsagent file from the market place based my target system configurations.
    Herewith attaching the logs while I'm trying to check the profile parameter.
    tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    ================================================================================
    ==   Checking profile:     /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    ================================================================================
    ***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
    ***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
    ***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
    ***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
    ***WARNING: Unexpected parameter: dbs/io_buf_size =100000
    ***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
    ***WARNING: Unexpected parameter: rsau/selector1/class =35
    ***WARNING: Unexpected parameter: rsau/selector1/severity =2
    ***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
    ***ERROR: Size of shared memory pool 40 too small
    ================================================================
    SOLUTIONS: (1) Locate shared memory segments outside of pool 40
                   with parameters like: ipc/shm_psize_<key> =0
    SOLUTION: Increase size of shared memory pool 40
              with parameter: ipc/shm_psize_40 =1472000000
    Shared memory disposition overview
    ================================================================
    Shared memory pools
    Key:   10  Pool
                Size configured.....:   642000000 ( 612.3 MB)
                Size min. estimated.:   637597428 ( 608.1 MB)
                Advised Size........:   640000000 ( 610.4 MB)
    Key:   40  Pool for database buffers
                Size configured.....:  1048000000 ( 999.4 MB)
                Size min. estimated.:  1468229308 (1400.2 MB)
                Advised Size........:  1472000000 (1403.8 MB)
    Shared memories inside of pool 10
    Key:        1  Size:        2500 (   0.0 MB) System administration
    Key:        4  Size:      523648 (   0.5 MB) statistic area
    Key:        7  Size:       14838 (   0.0 MB) Update task administration
    Key:        8  Size:    67108964 (  64.0 MB) Paging buffer
    Key:        9  Size:   134217828 ( 128.0 MB) Roll buffer
    Key:       11  Size:      500000 (   0.5 MB) Factory calender buffer
    Key:       12  Size:     6000000 (   5.7 MB) TemSe Char-Code convert Buf.
    Key:       13  Size:   200500000 ( 191.2 MB) Alert Area
    Key:       16  Size:       22400 (   0.0 MB) Semaphore activity monitoring
    Key:       17  Size:     2672386 (   2.5 MB) Roll administration
    Key:       30  Size:       37888 (   0.0 MB) Taskhandler runtime admin.
    Key:       31  Size:     4806000 (   4.6 MB) Dispatcher request queue
    Key:       33  Size:    39936000 (  38.1 MB) Table buffer, part.buffering
    Key:       34  Size:    20480000 (  19.5 MB) Enqueue table
    Key:       51  Size:     3200000 (   3.1 MB) Extended memory admin.
    Key:       52  Size:       40000 (   0.0 MB) Message Server buffer
    Key:       54  Size:    20488192 (  19.5 MB) Export/Import buffer
    Key:       55  Size:        8192 (   0.0 MB) Spool local printer+joblist
    Key:       57  Size:     1048576 (   1.0 MB) Profilparameter in shared mem
    Key:       58  Size:        4096 (   0.0 MB) Enqueue ID for reset
    Key:       62  Size:    85983232 (  82.0 MB) Memory pipes
    Shared memories inside of pool 40
    Key:        2  Size:    31168040 (  29.7 MB) Disp. administration tables
    Key:        3  Size:   114048000 ( 108.8 MB) Disp. communication areas
    Key:        6  Size:  1064960000 (1015.6 MB) ABAP program buffer
    Key:       14  Size:    28600000 (  27.3 MB) Presentation buffer
    Key:       19  Size:    90000000 (  85.8 MB) Table-buffer
    Key:       42  Size:    13920992 (  13.3 MB) DB TTAB buffer
    Key:       43  Size:    43422392 (  41.4 MB) DB FTAB buffer
    Key:       44  Size:     8606392 (   8.2 MB) DB IREC buffer
    Key:       45  Size:     6558392 (   6.3 MB) DB short nametab buffer
    Key:       46  Size:       20480 (   0.0 MB) DB sync table
    Key:       47  Size:    13313024 (  12.7 MB) DB CUA buffer
    Key:       48  Size:      300000 (   0.3 MB) Number range buffer
    Key:       49  Size:     3309932 (   3.2 MB) Spool admin (SpoolWP+DiaWP)
    Shared memories outside of pools
    Key:       18  Size:     1792100 (   1.7 MB) Paging adminitration
    Key:       41  Size:    25010000 (  23.9 MB) DB statistics buffer
    Key:       63  Size:      409600 (   0.4 MB) ICMAN shared memory
    Key:       64  Size:     4202496 (   4.0 MB) Online Text Repository Buf.
    Key:       65  Size:     4202496 (   4.0 MB) Export/Import Shared Memory
    Key:     1002  Size:      400000 (   0.4 MB) Performance monitoring V01.0
    Key: 58900130  Size:        4096 (   0.0 MB) SCSA area
    Nr of operating system shared memory segments: 9
    Shared memory resource requirements estimated
    ================================================================
    Nr of shared memory descriptors required for
    Extended Memory Management (unnamed mapped file).: 64
    Total Nr of shared segments required.....:         73
    System-imposed number of shared memories.:       1000
    Shared memory segment size required min..: 1472000000 (1403.8 MB)
    System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
    Swap space requirements estimated
    ================================================
    Shared memory....................: 2050.4 MB
    ..in pool 10  608.1 MB,   99% used
    ..in pool 40  999.4 MB,  140% used !!
    ..not in pool:   34.4 MB
    Processes........................:  716.8 MB
    Extended Memory .................: 8192.0 MB
    Total, minimum requirement.......: 10959.2 MB
    Process local heaps, worst case..: 1907.3 MB
    Total, worst case requirement....: 12866.5 MB
    Errors detected..................:    1
    Warnings detected................:    9
    After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
    Pls have a look at these two and let me know what could I do to proceed further.
    tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
    INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
    INFO: Central Monitoring System is [SMP]. (found in config file)
          additional CENTRAL system y/[n] ?   :
    INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
    INFO:
          CCMS version  20040229, 64 bit, multithreaded, Non-Unicode
          compiled at   Jun 28 2010
          systemid      324 (IBM RS/6000 with AIX)
          relno         6400
          patch text    patch collection 2010/1, OSS note 1304480
          patchno       335
    INFO Runtime:
          running on    saptqa01 AIX 3 5 00069A8FD600
          running with profile   /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    INFO profile parameters:
          alert/MONI_SEGM_SIZE = 200000000
          alert/TRACE          = 1
          SAPSYSTEM            = 30
          SAPSYSTEMNAME        = TQA
          SAPLOCALHOST         = saptqa01
          DIR_CCMS             = /usr/sap/ccms
          DIR_LOGGING          = /usr/sap/TQA/DVEBMGS30/log
          DIR_PERF             = /usr/sap/tmp
    INFO:
          pid           4165682
    INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
    INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct  3 2008,  kernel 6400_20020600_254,  platform 324 (IBM RS/6000 with AIX)]
            segment status     ENABLED
            segment started at Tue Sep 14 09:35:56 2010
            segment version    20040229
    ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
           Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
           Please change configuration with profile parameters
               ipc/shm_psize_01 = -<different pool nr>
           xor
               ipc/shm_psize_13 = -<different pool nr>
    EXITING with code 1

  • Solution Manager "Solutions"

    Hello,
    I need some general guidelines about setting up Solutions inside of Solution Manager. I have gone through and created logical components for just about everything that we have installed in our landscape. At present, I created 4 "solutions":
    1. Sandbox
    2. Development
    3. QA
    4. Prod
    I then tried to assign the various logical components to 1 of my solutions, and I received the following error message:
    "You cannot use system XYZ twice in solution Development"
    You see, I have a logical component for SAP ECC SERVER and another one for SAP ERP ENHANCEMENT PACKAGE (plus several others). I have assigned the same system to each logical component because in my mind I would think that the system would show up once inside the Solution and then it would list all of the logical components assigned to that system, but that doesn't appear to be the case.
    So, how do you setup your "solutions" inside of Solution Manager? Do I need to create a separate solution for each logical component? Ultimately, I want to use this information inside the maintenance optimizer to list any Support Packs / Stacks that may be missing for a particular component.
    Any help / direction would be appreciated!
    Thanks,
    Jason

    Hey Michael,
    You are correct. I have 4 ECC instances in my landscape. 1 for Sandbox, 1 for Dev, 1 for QA, and 1 for Prod. Each instance has ECC and the ERP Enh. Pack installed along with other components. So, I can't have a solution called Development with both the logical components ECC and ERP Enh. Pack in the same solution because each component points to the same server for Sandbox, Dev, QA, and Prod.
    So I'm wondering, do I create a solution called Development - ECC and another solution called Development - ERP Enh. Pack and break out the logical components that way, or is there something else that I'm missing?
    Eventually I want to have all of my logical components defined so that when I go into the Maintenance Optimizer for a solution, that Solution Manager will tell me which components for that solution I need to update to the latest Support Pack / Stack.
    In my mind, it seems that I should have a single instance in a solution with all logical components installed in that instance available. Another words, it should look like:
    Solution = Development
    Instance = XYZ
    Logical Components for Instance XYZ = ECC, ERP Enh. Pack, etc., etc.
    Jason

  • Solution Manager 7.1 SP11  Functionality

    Dear SAP specialists;
    Our company is currently using Solution Manager for the following purposes:
    Solution Manager 7.0 - to be decommisioned soon
    Document repository for SAP systems.
    Solution Manager 7.1 SP6
    SAP Banking Services and SAP BW Upgrade Projects documentation.
    Business Process Monitoring (BPMon) or Banking End-of-day (EOD) jobs, PI/XI interface queues, tRFC queues, Banking Services PCO/ PPO/CpD worklists, DBA Backup monitoring.
    SAP Data Volume Management (DVM) for production systems.
    Technical SAP system monitoring.
    Non-SAP Technical system monitoring.
    Intake Request Tool (custom-developed tool to log the request tickets through froms in SAP Portal).
    SAP Maintenance (MOPZ).
    SAP Early Watch Alert / SAP Ad-Hoc Reporting.
    Root Cause Analysis.
    Change Request Management (ChaRM) - *Under Development*.
    We are planning to get Solution Manager 7.1 SP11 soon and I am wondering about the following:
    Is there a comprehesive source of functional and technical information (presentations, white papers, guides, overviews) about Solution Manager SP11?
    How much does the SP11 upgrade changes the Solution Manager usage for purposes listed above?
    As of SP10 there is a new experimental MAI Alert functionality for Business Process Monitoring and Technical Monitoring. It is limited and does not support most of BPMon tools we use. This includes Application log Monitors, Notification BADI's, Monitoring Objects Lists, BW storage and reporting, monitoring templates and migration of current solutions)    
    How does CO Wily Introscope work with Solution Manager SP11?

    Hi Viacheslav,
    Here is the location for the info you are asking; Changes and New Features in SAP Solution Manager 7.1 SP11 - SAP Solution Manager - SAP Library
    Regards,
    Vivek

  • Problem while adding SAP Netweaver 7.3 As Java in Solution Manager 7.1

    Hi All,
    We are facing strange problem while configuring managed system- SAP Netweaver 7.3 As Java in Solution manager 7.1 SP3. We added this system in SLD of solution manager and synchronized it with LMDB. As a result this As Java system is present under Technical systems in SMSY. Now we are assigning Product system to it with Landscape verification tool. But the problem is when we try to save after assigning Product version as SAP Netweaver and Product as SAP Netweaver 7.3. It always gives below error:
    Fatal error trying to update Technical System (UPDATE_TSYSTEMS). Update could not be executed. 
    Product instance 54 not found
    Product instance number error keep on changing depend upon what usage i select like ADS 7.3, Application Server Java 7.3 etc.
    Please suggest if someone has faced this issue.
    Thanks
    Sunny

    Hi Sunny,
    You can refer to my first blog on this topic:
    #sapadmin:: How to assign Product System in SOLMAN 7.1 & How LMDB, SLD, SMSY and Landscape Verification  work in SOLMAN7.1
    Try to select only one product instance in LMDB and saved. After that, you can add more product instance in SMSY.
    Hope it helps.
    Cheers,
    Nicholas Chang

Maybe you are looking for

  • Multiple Users setup question

    OK, It's been a while since I set up anything other than a basic profile in OS 9, but here is what I have. School situation with users with limited capabilities (Multiple Handicap class). Students just need access to basic applications that are insta

  • Between 31-180days  using Sysdate function -Help needed

    I am not getting any data in between 31 days and 180days in table Cust_lst_prch_dt : 02/19/2009 01/20/2009 My query : select CUST_LST_PRCH_DT from order_table where CUST_LST_PRCH_DT>=trunc(sysdate)-31 and CUST_LST_PRCH_DT<=trunc(sysdate)-180 Please h

  • What am I doing wrong? Dropped frames on a 1.4MB Quicktime file?

    I am new to all this and get more confused by the day. So, it looks like HD express runs and is supported on Macbook, so, why is just importing a 1.4MB quicktime file plays fine in preview, but drops frames in canvas? Having used PC programs I am not

  • Rscrm_bapi error

    Hi, i tried to execute a query using rscrm_bapi. After selecting a query, when i goto 'Query Definition' screen, i am getting warnings for some of the variables in the query. S:RSCRM:260 0SALEORG Message no. RSCRM260 I am getting this message for 5 o

  • Project Scheduling in Planning Board

    Dear Experts, When I am scheduling the project (all wbse and network) through planning board, after clicking the schedule icon a pop-up window is coming and in the pop-up window it is written Select set of dates . Any idea why this pop-up is coming.