Solution manager 4.0and Netweaver 2004s - same "SAP system ID???
Hi,
Can we install <b>solution manager 4.0</b> and <b>Netweaver 2004s</b> on same <b><u>AIX</u></b> machine with same <b>"SAP system ID"</b> ?
Thanks
No, that's not a good idea because the system ID is part of the file system. And the system ID is used to mark your systems unique.
Best regards
Rainer
Similar Messages
-
How to install both solution manager and ECC Development on same server
Hi All,
Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
Pls let me know.
Regards,
KarthikHi Karthik,
I try to answer you message, my answer may not be sufficient for you.
Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
Verify sizing of both systems.
SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
Best regards,
Ruediger Stoecker -
Difference Between SAP Netweaver 2004 and SAP Netweaver 2004s (7.0)
Dear All,
Could you please list out the differences between SAP Netweaver 2004 and SAP Netweaver 2004s (7.0)?
Thanks,
Rahul BhatHi Rahul,
These threads can give you some insight:
What's it gonna be: NW2004S?
NW2004 vs. NW2004s
Need help on Netweaver 2004 and Netweaver 2004s
/thread/196931 [original link is broken]
difference between 2004 and 2004s?
NetWeaver version question
Bye
Ankur -
Solution Manager EWA - cannot create session in satellite system
"Hi,
I want to configure EWA self service using Solman 4.0. I succesfully did the following :
a. Maintained SMSY and create the required trusted RFC connections from SM to satellite system. All connection and authorization passed in SM59. I used SAP_ALL/SDCCN_ALL role and assigned objects S_RFC*.
b. Assigned the system to a logical system.
c. Created the a new solution and activate "Solutions Monitoring > Earlywatch Alert"
d. Activated and maintained required RFC in SDCCN in satallite system.
My problem is that the create EWA alert request (Red Flag with a specific session number ) coulnd be pass to the satelitte system even though all the trusted RFC and authorization is set. When i execute the SESSION_REFRESH in the satellite system, the session is not created.
Did I miss out any steps. Can any one share any help ?
FYI, there is no connection to SAPOSS yet, so i did not manage to run RTCCTOOL completed, but i doubt this is required for EWA self service."
I have the same problem as Solution Manager EWA - cannot create session in satellite system
tried all of solutions, but it does not help... Created the CM (high) for SAP, but get 1 response for 1 week from them:(Dear Sapbcer,
Have you tried the following option :
Execute SMSY and from the Server entry Execute the "Read System Data Remote" option in change mode.
Save the data captured and then try using Refresh Session Task from SDCCN of the satellite system. Do select the RFC for Solution Manager while performing this task.
Hope this helps.
Regards
Amit -
Two different company in same SAP system ?
Dear Gurus,
I came across a requirement from Client
There is a company A which is having own business . This company A operates/manage company B (all panning/execution/sales purchase/inventory etc) but not in Books of account. From legal point of view company A is funding company B & generates profit/loss.
But practically company A manages all Business of Company B like a group company but from legal point of view it is a Third party in which company A has Investment . In management reporting they shows all the details of company B.
The reason of this kind of arrangement is govt licence.
In there current situation they have there own legacy system on which they manages this all things ( 2 different Data base ) & its legal .
Can this be mapped in same SAP System ( say as different company code or any other way ) ? ? How ?
Regards,
IshwarDear Christian,
Actually I feel that may be that is possible by creating a new company code but i am more concern from Audit point of view
Auditor might have problem : why i am mapping some other (legal point of view ) company Transaction in my system ?
if anybudy has came across similar situation please guide
Ishwar -
Solution Manager 4.0 is compatible for SAP 4.7 ?
Hi,
We are currently upgrading from R/3 4.6B to 4.7. The database is Oracle 9.2.0.7 and O/S is AIX 5.3
When I looked at platform matrix for Solution Manager 4.0 , it says compatible with Netweaver 2004s and Oracle 10g.
Is it possible to use Solution Manager 4.0 to the above configurations?
Thanks,
SamHello Sam,
Yes it is very much compatibale... i adid not check any documents but my systems are the very much same.
My satellite systems have been upgarded form 4.0B to 4.7 in the start of this year and the solman system from 3.2 to 4.0 in the last month.
We have been running the EWA configs, support desk and other functionalities very successfully.
hope this answers the Question.
Award points accordingly.
Br,
Sri
Let me know ur queries if any specific. -
Is Solution Manager mandatory for getting support for SAP 4.7?
Hi,
We received a letter from SAP regarding Solution Manager which stated:
"Commencing on April 2, 2007, SAP Solution Manager will be the only source from which customers receive maintenance updates for SAP NetWeaver 2004s and beyond, as well as applications based upon it (including mySAP Business Suite 2005 applications)."
We are still using SAP 4.7. We do not use Solution Manager. Does this statement mean that for getting any updates / support patches on 4.7, we will need to implement Solution Manager?
Can anybody clarify your understanding or SAP's stand on this?
Regards,
AshishTo add to Dolores point, The link in market place...
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000689446&_SCENARIO=01100035870000000202&
The link also contains the SAP Tutor file explaining the process. Hope it helps you.
Br,
Sri
Award points for helpful answers -
Solution Manager trace file ? Details of all systems messages ?
Hi,
I had developed custom applications involving different systems like IDES, R/3, File system and web services and BPM scenarios.
These systems are integrated with XI, and now I want to monitor the message exchanges between these systems.
I need all information (in form of txt or log trace file) containing
which systems are involved. Parameters used during communications data exchanged between them or message header, content of the messages etc.
As far as I know log files contain lot of information about user activities like transactions executed, messages exchanged between systems etc......I already tried to monitor the log files at XI level, but it contain very less information about the executions.
Solution manager and remote systems configurations are already done.
I have the following questions.....
1) Will Solution manager be the right choice to monitor such information ? If yes, then where and how ?
2) Is there any combined log file in solution manager which contain all log information about the connected systems ?
3) Where I can find the log files of solution manager ? (Is there a single file which contains all information?)
4) How communication (message exchanges) between composite applications is monitored in SAP ?
How to switch on tracing for Log file (which trace level and what settings), offcourse it will generate lot of data
Regards,
hussaanHi,
Please download that attachment "scripts_1139623.sar" provided in SAP Note 1139623 - Using transaction RZ20 to monitor remote Oracle databases.
Upon extraction of scripts_1139623.sar the following files you will get.
rz20_nonabap.sql
dbcheckora10_oltp.sql
dbcheckora.sql
Then Perform the below mentioned Steps to resolve your issue.
Step 1: Create tables DBCHECKORA and DBMSGORA:
sqlplus SAPSR3DB/<pwd>
SQL> @rz20_nonabap.sql
Step 2: Fill the table DBCHECKORA:
sqlplus SAPSR3DB/<pwd>
SQL> @dbcheckora10_oltp
Step 3: Create the synonyms (as user ora<sid>):
brconnect -u / -c -f crsyn -o SAPSR3DB
sqlplus "/as sysdba"
CREATE PUBLIC SYNONYM SAP_DBSTATC FOR SAPSR3DB.DBSTATC;
CREATE PUBLIC SYNONYM SAP_DBCHECKORA FOR SAPSR3DB.DBCHECKORA;
CREATE PUBLIC SYNONYM SAP_DBMSGORA FOR SAPSR3DB.DBMSGORA;
Step 4: Grant Privileges for OPS$<SID>ADM User for the above created Tables
sqlplus "/as sysdba"
grant all on SAPSR3DB.DBSTATC to OPS$<SID>ADM;
grant all on SAPSR3DB.DBCHECKORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBMSGORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTAIHORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATHORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATIORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATTORA to OPS$<SID>ADM;
commit;
Step 5:
Now after successful execution of above mentioned Steps , in DBACOCKPIT (system configuration), try to save the Remote DB entry with "Collect Alert Data". It will be saved without any error.
If you find any errors, post the error contents as a reply of this thread message.
Regards,
Bhavik G. Shroff -
Can we have XI on Netweaver 2004 and SAP AII 5.1 on separate Netweaver 2004
HI,
I am very new to RFID(working in XI.)
we are planning to integrate SAPAII 5.1 with SAP XI -->R3.
1. Can we keep XI and SAP AII5,.0 same netwever stack ?
or do we need keep on 2 different stacks.Hi Yogesh,
Thanks for your reply.
can you please tell me the advantages if we keep both on same stack.
also what are the concerns if we kept both on different stacks. -
Post IDOC within same SAP system
Hi All,
I used IDOC to send data from SAP to XI in my previous assignments.
Now i have a requirement wherein i need to use an idoc to post data within SAP i.e in the same system. This is because incase the idoc fails the end user can correct the data and re-process the idoc and post it again. though its not so recommended its agreeded upon in the design phase.
now my doubt is in MASTER_IDOC_DISTRIBUTE should i set the control record so that it points to the same system which means the port i create which has an RFC which will point to the same system from where the report is run. is this the correct way.
thank you.
Regards,
Jayaram
Edited by: JAYARAM MAGANTI on Aug 19, 2009 2:55 PMJayaram,
Steps you mentioned are correct.
Pls maintain the values as I shown below , you will be able to post the idoc in the same system.
And one more suggestion , us fm 'IDOC_INBOUND_SYNCHRONOUS' as this will give you the idoc number in return. So that in the same program you can use it for any reporting purpose or you can show in the output screen the list of idocs generated etc.
DATA : lv_sysid LIKE sy-sysid.
gwa_edi_dc-tabnam = 'EDI_DC'.
gwa_edi_dc-mandt = sy-mandt.
gwa_edi_dc-docrel = sy-saprl.
gwa_edi_dc-status = '30'.
gwa_edi_dc-doctyp = 'ORDERS05'.
gwa_edi_dc-direct = '2'.
gwa_edi_dc-rcvpor = 'SAPxxx'.
REPLACE 'xxx' WITH sy-sysid INTO gwa_edi_dc-rcvpor.
gwa_edi_dc-rcvprt = 'LS'.
gwa_edi_dc-rcvprn = sy-sysid.
CONSTATNT : gc_clnt(4) TYPE c VALUE 'CLNT',
MOVE gc_clnt TO gwa_edi_dc-rcvprn+3.
MOVE sy-mandt(3) TO gwa_edi_dc-rcvprn+7.
gwa_edi_dc-sndpor = 'SAPxxx'.
CLEAR lv_sysid.
*Here you need to populate your sys id lv_sid
*example lv=sid = 'PDV'. "pdv is our producion system
REPLACE 'xxx' WITH lv_sysid INTO gwa_edi_dc-sndpor.
gwa_edi_dc-sndprt = 'LS'.
gwa_edi_dc-sndpfc = 'LS'.
gwa_edi_dc-sndprn = gc_sndprn."Comming as from Parameter.
gwa_edi_dc-credat = sy-datum.
gwa_edi_dc-cretim = sy-uzeit.
gwa_edi_dc-mestyp = 'ORDERS'.
gwa_edi_dc-exprss = 'X'.
CALL FUNCTION 'IDOC_INBOUND_SYNCHRONOUS'
EXPORTING
int_edidc = "control record ie gwa_edi_dc
online = 'O'
IMPORTING
docnum = lv_docnum " it gives idoc number
TABLES
int_edidd = "pass data record
EXCEPTIONS
idoc_not_saved = 1
OTHERS = 2.
Now you can use the idoc number anywhere you want .
wa_idoc-docnum = lv_docnum.
Best Regards,
Vvieks
"Grow and help others to grow" -
Post IDOC internally in same SAP system
Hi All,
I used IDOC to send data from SAP to XI in my previous assignments.
Now i have a requirement wherein i need to use an idoc to post data within SAP i.e in the same system. This is because incase the idoc fails the end user can correct the data and re-process the idoc and post it again. though its not so recommended its agreeded upon in the design phase.
now my doubt is in MASTER_IDOC_DISTRIBUTE should i set the control record so that it points to the same system which means the port i create which has an RFC which will point to the same system from where the report is run. is this the correct way.
thank you.
Regards,
JayaramHi,
You can test in the same system
But make sure that the using partner profile(WE21) is having Collect IDOC's option so that the IDOC are not transferred to the target system.
Hope this helps
Regards
Shiva -
Valuated and Non-valuated project stock in same SAP system
Dear All,
Can we operate with the system where projects are with valuated and non-valuated project stock at the same time. If yes, are there any precautions we need to take before doing this.
Currently we are changing to 'valuated project stock' from 'non-valuated project stock' due to advantages of 'valuated project stock'. But since we are implementing this change in already stable system where projects are running with 'non-valuated project stock'. Please suggest of there are any complication with this.
Thanks in advance !
RegardsHi Muralidhar Lanka,
Thanks for your time and efforts to share your thoughts with all of us. Hope you will not mind, did you done this kind of changes to profiles midst of the project in the past? or its your guess.
Because, many times these kind of questions comes from business to change, but we are not sure how it will affect the existing as well new projects. In such circumstances, normally we politely propose to go with two profiles rather changing the existing one since we are not sure of how it will affect.
It would be great help to all of us if you can share your experiences how the goods movement and value flows have taken in system for old projects and new projects. What kind of changes you could notice after changing profile in terms of .. a few of them
1. Goods movement
2. Consumption of production orders and internal order.
3. Settlement and RA (customer projects/ investment projects)
4. POC calcualtion of projects
I am sorry if you find my questions are silly and not worth to answer, please disregard.
Looking forward to hear from you at your convenient time.
Thanks,
PSR -
Changing Solution manager landscape and having a Virtual production system
We have a 2 line landscape like this
Line1: DEV1 - QAS1 - PROD1
Line2: DEV2 - QAS2 - VirtualPROD.
During our golive pahse the QAS1 in Line1 will be replaced by the QAS2 in Line2 and Lin 2 will be on hold for a while.
My questions,
1) does any one have any experience in topic?, on how to change the system landscape without closing any tasklist/maintenance cycle or project.
2) We have some problems with logging on to QAS system from the change request when having a virtual production system, it works fine from the tasklist.
Unfortunalty we can't see anything in the log.
3)When having multiple QAS systems in one Line , how can the import the change to the second QAS system be handled when using urgent correction since only one QAS is in the task list the one which feeds the production system. (Urgent correction always uses the shortest path to production)
Comments, references and all else is valuable.
br
patrikQuestion #2
Apperently does the system check for a connection to the production system and since it's virtual there is no rfc , so would it be possible to create an rfc to a virtual system? -
Error while installing solution manager 7.1
Hi All,
I am installing SAP Solution Manager 7.1 SR1 i am facing below issue ,any one please suggest me how to proceed further.I am new to sybase .
An error occurred while processing option SAP Solution Manager 7.1 Support Release 1 > SAP Systems > SAP ASE > Central System > Central System( Last error reported by the step: Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/SOLMAN71/SYSTEM/SYB/CENTRAL/AS.
import_monitor.java log:
java version "1.4.2_32"
Java(TM) 2 Runtime Environment, Standard Edition (build 4.1.016)
SAP Java Server VM (build 4.1.016 1.6-b03, Dec 31 2011 00:41:53 - 41_REL - optU - windows amd64 - 6 - bas2:164914 (mixed mode))
Import Monitor jobs: running 1, waiting 28, completed 0, failed 0, total 29.
Loading of 'SAPNTAB' import package: ERROR
Import Monitor jobs: running 0, waiting 28, completed 0, failed 1, total 29.
import_monitor Log:
INFO: 2014-07-01 10:49:48
Import Monitor is started.
CONFIG: 2014-07-01 10:49:48
Application options:
dbCodepage=4103
dbType=SYB
extFiles=no
importDirs=D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_1\DATA_UNITS\EXP1;D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_1\DATA_UNITS\EXP2;D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP3;D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4
installDir=C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\SYB\CENTRAL\AS
jobNum=8
loadArgs=-c 99000000 -loadprocedure fast
monitorTimeout=30
orderBy=
r3loadExe=D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2014-07-01 10:49:48
List of packages with table structure: 'SAP0000'.
CONFIG: 2014-07-01 10:49:48
List of packages with views: 'SAPVIEW'.
TRACE: 2014-07-01 10:49:48 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\SYB\CENTRAL\AS\DDLSYB.TPL' template file is started.
INFO: 2014-07-01 10:49:48 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\SYB\CENTRAL\AS\DDLSYB.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2014-07-01 10:49:48
Data codepage 1100 is determined using TOC file 'D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_1\DATA_UNITS\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2014-07-01 10:49:48
Version table 'SVERS' is found in STR file 'D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2014-07-01 10:49:48
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2014-07-01 10:49:48 com.sap.inst.migmon.LoadThreadDispatcher loadPackage_report
Monitor jobs: running 1, waiting 28, completed 0, failed 0, total 29 Package Group max threads: 1 current running threads : 0 processing package: SAPNTAB
TRACE: 2014-07-01 10:49:48 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is started.
TRACE: 2014-07-01 10:49:48 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPNTAB' import package into database:
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -c 99000000 -loadprocedure fast
INFO: 2014-07-01 10:49:59 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 0, waiting 28, completed 0, failed 1, total 29 error processing of package SAPNTAB
ERROR: 2014-07-01 10:49:59 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is interrupted with R3load error.
Process 'D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -c 99000000 -loadprocedure fast' exited with return code 2.
For mode details see 'SAPNTAB.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2014-07-01 10:50:18
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2014-07-01 10:50:18
1 error(s) during processing of packages.
INFO: 2014-07-01 10:50:18
Import Monitor is stopped.
INFO: 2014-07-01 11:09:16
Import Monitor is started.
CONFIG: 2014-07-01 11:09:16
Application options:
dbCodepage=4103
dbType=SYB
extFiles=no
importDirs=D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_1\DATA_UNITS\EXP1;D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_1\DATA_UNITS\EXP2;D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP3;D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4
installDir=C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\SYB\CENTRAL\AS
jobNum=8
loadArgs=-c 99000000 -loadprocedure fast
monitorTimeout=30
orderBy=
r3loadExe=D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2014-07-01 11:09:16
List of packages with table structure: 'SAP0000'.
CONFIG: 2014-07-01 11:09:16
List of packages with views: 'SAPVIEW'.
TRACE: 2014-07-01 11:09:16 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\SYB\CENTRAL\AS\DDLSYB.TPL' template file is started.
INFO: 2014-07-01 11:09:16 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\SYB\CENTRAL\AS\DDLSYB.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2014-07-01 11:09:16
Data codepage 1100 is determined using TOC file 'D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_1\DATA_UNITS\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2014-07-01 11:09:16
Version table 'SVERS' is found in STR file 'D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2014-07-01 11:09:16
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2014-07-01 11:09:16 com.sap.inst.migmon.LoadThreadDispatcher loadPackage_report
Monitor jobs: running 1, waiting 28, completed 0, failed 0, total 29 Package Group max threads: 1 current running threads : 0 processing package: SAPNTAB
TRACE: 2014-07-01 11:09:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is started.
TRACE: 2014-07-01 11:09:16 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPNTAB' import package into database:
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -c 99000000 -loadprocedure fast
INFO: 2014-07-01 11:09:27 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 0, waiting 28, completed 0, failed 1, total 29 error processing of package SAPNTAB
ERROR: 2014-07-01 11:09:27 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is interrupted with R3load error.
Process 'D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -c 99000000 -loadprocedure fast' exited with return code 2.
For mode details see 'SAPNTAB.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2014-07-01 11:09:46
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2014-07-01 11:09:46
1 error(s) during processing of packages.
INFO: 2014-07-01 11:09:46
Import Monitor is stopped.
NOTE:
The same issue has been solved in SCN Thread http://scn.sap.com/thread/3360385. As suggested in that note i am trying to look into the sap note
Note 1716201 - SYB:Update control.xml files for installation: Sybase ASE
in service market place but it is displaying as Document not released.
Kindly can any one help me in provind the above mentioned note or help me how to resolve this issue.
Regards,
SURYA.HI Divyanshu,
Below is the SAPNTAB.log:
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140630211543
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.4 [UNICODE]
Compiled Dec 2 2011 03:21:30
patchinfo (patches.h): (0.113) NewDB R3load better support (note 1564286)
process id 1680
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe -ctf I D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DATA\SAPNTAB.STR C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\SYB\CENTRAL\AS\DDLSYB.TPL SAPNTAB.TSK SYB -l SAPNTAB.log
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: job completed
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140630211543
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140630211543
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.4 [UNICODE]
Compiled Dec 2 2011 03:21:30
patchinfo (patches.h): (0.113) NewDB R3load better support (note 1564286)
process id 1904
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -c 99000000 -loadprocedure fast
(DB) INFO: connected to DB
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SQLFiles.LST
(SQL) INFO: D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file SDIC.SQL
(SQL) INFO: SDIC.SQL not found
(SQL) INFO: Searching for SQL file D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SYB/SDIC.SQL
(SQL) INFO: D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SYB/SDIC.SQL not found
(DB) INFO: SVERS created
(IMP) INFO: import of SVERS completed (1 rows) #20140630211544
(DB) INFO: SVERS~0 created
(DB) INFO: DDNTF created
(SYB_IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "DDNTF"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: DDNTF~0 created
(DB) INFO: DDNTF_CONV_UC created
(SYB_IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "DDNTF_CONV_UC"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: DDNTF_CONV_UC~0 created
(DB) INFO: DDNTT created
(SYB_IMP) ERROR: DbSlEndModify failed
rc = 99, table "DDNTT"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: EndFastload: rc = 2
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "DDNTT~0" ON "DDNTT" ( "TABNAME" ) )
DbSlExecute: rc = 99
(SQL error 1505)
error message returned by DbSl:
[ASE Error SQL1505][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Create unique index aborted on duplicate key. Primary key is '""'
(DB) INFO: DDNTT_CONV_UC created
(SYB_IMP) ERROR: DbSlEndModify failed
rc = 99, table "DDNTT_CONV_UC"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: EndFastload: rc = 2
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "DDNTT_CONV_UC~0" ON "DDNTT_CONV_UC" ( "TABNAME" ) )
DbSlExecute: rc = 99
(SQL error 1505)
error message returned by DbSl:
[ASE Error SQL1505][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Create unique index aborted on duplicate key. Primary key is '""'
(DB) INFO: disconnected from DB
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 6 error(s)
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140630211555
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140701104948
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.4 [UNICODE]
Compiled Dec 2 2011 03:21:30
patchinfo (patches.h): (0.113) NewDB R3load better support (note 1564286)
process id 2304
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -c 99000000 -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: DDNTF deleted/truncated
(SYB_IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "DDNTF"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: DDNTF_CONV_UC deleted/truncated
(SYB_IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "DDNTF_CONV_UC"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: DDNTT deleted/truncated
(SYB_IMP) ERROR: DbSlEndModify failed
rc = 99, table "DDNTT"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: EndFastload: rc = 2
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SQLFiles.LST
(SQL) INFO: D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file SDIC.SQL
(SQL) INFO: SDIC.SQL not found
(SQL) INFO: Searching for SQL file D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SYB/SDIC.SQL
(SQL) INFO: D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SYB/SDIC.SQL not found
(DB) ERROR: DDL statement failed
(DROP INDEX "DDNTT"."DDNTT~0")
DbSlExecute: rc = 103
(SQL error 3701)
error message returned by DbSl:
[ASE Error SQL3701][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Cannot drop the index 'DDNTT.DDNTT~0', because it doesn't exist in the system catalogs.
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "DDNTT~0" ON "DDNTT" ( "TABNAME" ) )
DbSlExecute: rc = 99
(SQL error 1505)
error message returned by DbSl:
[ASE Error SQL1505][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Create unique index aborted on duplicate key. Primary key is '""'
(DB) INFO: DDNTT_CONV_UC deleted/truncated
(SYB_IMP) ERROR: DbSlEndModify failed
rc = 99, table "DDNTT_CONV_UC"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: EndFastload: rc = 2
(DB) ERROR: DDL statement failed
(DROP INDEX "DDNTT_CONV_UC"."DDNTT_CONV_UC~0")
DbSlExecute: rc = 103
(SQL error 3701)
error message returned by DbSl:
[ASE Error SQL3701][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Cannot drop the index 'DDNTT_CONV_UC.DDNTT_CONV_UC~0', because it doesn't exist in the system catalogs.
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "DDNTT_CONV_UC~0" ON "DDNTT_CONV_UC" ( "TABNAME" ) )
DbSlExecute: rc = 99
(SQL error 1505)
error message returned by DbSl:
[ASE Error SQL1505][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Create unique index aborted on duplicate key. Primary key is '""'
(DB) INFO: disconnected from DB
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 6 error(s)
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140701104959
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140701110916
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.4 [UNICODE]
Compiled Dec 2 2011 03:21:30
patchinfo (patches.h): (0.113) NewDB R3load better support (note 1564286)
process id 2056
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -c 99000000 -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: DDNTF deleted/truncated
(SYB_IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "DDNTF"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: DDNTF_CONV_UC deleted/truncated
(SYB_IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "DDNTF_CONV_UC"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: DDNTT deleted/truncated
(SYB_IMP) ERROR: DbSlEndModify failed
rc = 99, table "DDNTT"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: EndFastload: rc = 2
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SQLFiles.LST
(SQL) INFO: D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file SDIC.SQL
(SQL) INFO: SDIC.SQL not found
(SQL) INFO: Searching for SQL file D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SYB/SDIC.SQL
(SQL) INFO: D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SYB/SDIC.SQL not found
(DB) ERROR: DDL statement failed
(DROP INDEX "DDNTT"."DDNTT~0")
DbSlExecute: rc = 103
(SQL error 3701)
error message returned by DbSl:
[ASE Error SQL3701][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Cannot drop the index 'DDNTT.DDNTT~0', because it doesn't exist in the system catalogs.
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "DDNTT~0" ON "DDNTT" ( "TABNAME" ) )
DbSlExecute: rc = 99
(SQL error 1505)
error message returned by DbSl:
[ASE Error SQL1505][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Create unique index aborted on duplicate key. Primary key is '""'
(DB) INFO: DDNTT_CONV_UC deleted/truncated
(SYB_IMP) ERROR: DbSlEndModify failed
rc = 99, table "DDNTT_CONV_UC"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: EndFastload: rc = 2
(DB) ERROR: DDL statement failed
(DROP INDEX "DDNTT_CONV_UC"."DDNTT_CONV_UC~0")
DbSlExecute: rc = 103
(SQL error 3701)
error message returned by DbSl:
[ASE Error SQL3701][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Cannot drop the index 'DDNTT_CONV_UC.DDNTT_CONV_UC~0', because it doesn't exist in the system catalogs.
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "DDNTT_CONV_UC~0" ON "DDNTT_CONV_UC" ( "TABNAME" ) )
DbSlExecute: rc = 99
(SQL error 1505)
error message returned by DbSl:
[ASE Error SQL1505][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Create unique index aborted on duplicate key. Primary key is '""'
(DB) INFO: disconnected from DB
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 6 error(s)
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140701110927
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140701120231
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.4 [UNICODE]
Compiled Dec 2 2011 03:21:30
patchinfo (patches.h): (0.113) NewDB R3load better support (note 1564286)
process id 2288
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -c 99000000 -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: DDNTF deleted/truncated
(SYB_IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "DDNTF"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: DDNTF_CONV_UC deleted/truncated
(SYB_IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "DDNTF_CONV_UC"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: DDNTT deleted/truncated
(SYB_IMP) ERROR: DbSlEndModify failed
rc = 99, table "DDNTT"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: EndFastload: rc = 2
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SQLFiles.LST
(SQL) INFO: D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file SDIC.SQL
(SQL) INFO: SDIC.SQL not found
(SQL) INFO: Searching for SQL file D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SYB/SDIC.SQL
(SQL) INFO: D:\SAP_DOWNLOADS\INSTALLATION_EXPORTS\EXTRACTED\51042607_2\DATA_UNITS\EXP4\DB/SYB/SDIC.SQL not found
(DB) ERROR: DDL statement failed
(DROP INDEX "DDNTT"."DDNTT~0")
DbSlExecute: rc = 103
(SQL error 3701)
error message returned by DbSl:
[ASE Error SQL3701][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Cannot drop the index 'DDNTT.DDNTT~0', because it doesn't exist in the system catalogs.
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "DDNTT~0" ON "DDNTT" ( "TABNAME" ) )
DbSlExecute: rc = 99
(SQL error 1505)
error message returned by DbSl:
[ASE Error SQL1505][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Create unique index aborted on duplicate key. Primary key is '""'
(DB) INFO: DDNTT_CONV_UC deleted/truncated
(SYB_IMP) ERROR: DbSlEndModify failed
rc = 99, table "DDNTT_CONV_UC"
(SQL error 30128)
error message returned by DbSl:
[ASE Error SQL30128:HY000][SAP][ASE ODBC Driver]Data overflow. Increase specified column size or buffer size
(IMP) ERROR: EndFastload: rc = 2
(DB) ERROR: DDL statement failed
(DROP INDEX "DDNTT_CONV_UC"."DDNTT_CONV_UC~0")
DbSlExecute: rc = 103
(SQL error 3701)
error message returned by DbSl:
[ASE Error SQL3701][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Cannot drop the index 'DDNTT_CONV_UC.DDNTT_CONV_UC~0', because it doesn't exist in the system catalogs.
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "DDNTT_CONV_UC~0" ON "DDNTT_CONV_UC" ( "TABNAME" ) )
DbSlExecute: rc = 99
(SQL error 1505)
error message returned by DbSl:
[ASE Error SQL1505][SAP][ASE ODBC Driver][Adaptive Server Enterprise]Create unique index aborted on duplicate key. Primary key is '""'
(DB) INFO: disconnected from DB
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 6 error(s)
D:\usr\sap\MSM\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140701120242 -
Solution Manager Installation Fails at step Run ABAP Reports
I'm trying to install Solution Manager 4.0 on Windows 2003 using SQL 2005. The installation fails at the Run ABAP Reports step: Executing ABAP report RADDBDIF
I have logged in manually and run the RADDBDIF job in SE38 but I receive the same error message. My SAPTRANHOST is properly defined and so are the shares. Can anyone help? Thank!
Here's the sapinst_dev.log:
Calling function module: INST_RFC_GET_INTERFACE
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1065]
CAbRfcImpl::performFunctionCall
Function call was successful.
TRACE 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1066]
CAbRfcImpl::performFunctionCall
Function module call succesful: INST_RFC_GET_INTERFACE
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:924]
CAbRfcImpl::getRfcInterfaceSAP
Function interface generated successfully.
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:926]
CAbRfcImpl::getRfcInterfaceSAP
Technical properties of function set successfully.
INFO 2008-10-21 14:00:34.842 [iaxxrfcfls.cpp:107]
CRfcFuncRep::insFuncIf
Information for application function INST_EXECUTE_REPORT copied to local repository.
TRACE 2008-10-21 14:00:34.842 [iaxxrfcfls.cpp:108]
CRfcFuncRep::insFuncIf
Function interface entered into repository for INST_EXECUTE_REPORT
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:622]
CAbRfcImpl::setFunction
Function module INST_EXECUTE_REPORT set successfully.
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setFunction() done: true
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter(PARA, [])
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter() done: true
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter(PROGRAM, RADDBDIF)
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter() done: true
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.execute()
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1032]
CAbRfcImpl::callFunction
Executing function call INST_EXECUTE_REPORT.
TRACE 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1056]
CAbRfcImpl::performFunctionCall
Calling function module: INST_EXECUTE_REPORT
ERROR 2008-10-21 14:00:35.045 [iaxxrfcimp.cpp:1089]
CAbRfcImpl::performFunctionCall
FRF-00025 Unable to call function. Error message: Exception condition "WRITE_FAILED" raised. .
TRACE 2008-10-21 14:00:35.045 [iaxxrfcimp.cpp:1090]
CAbRfcImpl::performFunctionCall
RFC failure or system exception raised
TRACE 2008-10-21 14:00:35.045 [iaxxrfcimp.cpp:1091]
CAbRfcImpl::performFunctionCall
Exception condition "WRITE_FAILED" raised.
INFO 2008-10-21 14:00:35.045 [iaxxbjsco.cpp:561]
CIaJSCo::disconnect_nothrow(000:DDIC:EN:nath02:00::SOL:)
RFC connection closed.
TRACE 2008-10-21 14:00:35.45 [iaxxejsbas.hpp:408]
handleException<ERfcExcept>()
Converting exception into JS Exception ERfcException.
TRACE 2008-10-21 14:00:35.045
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException
ERROR 2008-10-21 14:00:35.045
CJSlibModule::writeError_impl()
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
TRACE 2008-10-21 14:00:35.45 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-10-21 14:00:35.45 [sixxcstepexecute.cpp:951]
FCO-00011 The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR ( Last error reported by the step :Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..).
TRACE 2008-10-21 14:00:35.61 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP Solution Manager 4.0 Support Release 4 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step :Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..). You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS. </p> </body></html>
TRACE 2008-10-21 14:00:35.61 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUIHello Amélie,
Check the file systems if you're not ran out of disk space.
Second, check the database if you've enough storage space left.
Hope it helps.
Cheers,
Satish.
Maybe you are looking for
-
Imac G5 will not start up correctly? invalid directory count 52 instead of 53
Hi, i have a Imac G5. it had been working fine for many years untill a year or 2 ago when it stopped all of a sudden and just would not start up as it should. instead, it went to this grey screen with horizontal lines. eventually after trying just ab
-
Lion - can no longer connect to WD wireless network / hard drive.
I upgraded to Lion and now I am unable to connect to my WD wireless network hard drive. it tells me that the version of the server I am trying to connect to is not supported and to contact your system administrator to resolve the problem. Suggestio
-
I have a group and want the group name to show up in the "To" line of a new email rather than "undisclosed recipients" Is there a way to do that? Thanks!
-
Month End Closing Procedure.
Hi, Can some one send me month end closing activites carried out with T Code to my mail id is [email protected] Points will awarded. Regards, Kiran.
-
Is there a trial version for cs6?
I am a traditional artist and just got a computer. I am currently in High school and about to go to college. I have worked with Photoshop in school before but they use CS5 version. Also I want to buy the CS6 because I am going to use it in college w