Solution Manager 7.1 Cannot Create Solution (No Business Partner)
Hello everybody,
I would like to ask your help about some issue in our Solution Manager (7.1 SP 10 VAR Scenario).
We need to create solutions but when we go Solution Manager Administration Workspace and we click on create we are prompted to select Business Partner, a field which gives no selection options (empty).
Has anybody here faced the same problem? Can you please provide some information how to tackle this or some kind of documentaion/link?
Kind Regards
Hi Lluis Salvador Suarez,
Thank you for your answer and explanation.
When I check in SE11, I see that SMSY_SHLP_BP_SPC_FOR_USER does not exist.
SMSY_BP_SPC_FOR_USER_OBJ_MAINT is active.
Do you have any idea about this?
Also, in SOLMAN_DIRECTORY I am not able to select any customer.
If you think this is about authorizations do you have some idea what it might be? I checked and it does not appear to have any problem with that in fact. I do not get any authorization failure.
Many thanks
Similar Messages
-
Using Solution Manager 7.0 to Generate Solution Key for SAP Netweaver 7.3 ?
Hi, SDN Gurus.
We are running Solution Manager 7.0.
I am trying to generate solution key for SAP Netweaver 7.3 system. When I was creating a new system (in TCode SMSY); I only see Newtweaver 7.1 is the latest version available in the SAP Netweaver product version drop down list.
Is that true that I always need to upgrade the latest/compatible version (SP & patches) of SAP Solution Manager to generate solution key for the latest released of SAP products?
If this is the case, what version of SAP Solution Manager I need to create new system and generate solution key for SAP Netweaver 7.3?
Thanks for advices,
KCHi,
Please follow the note [Note 1274430 - Installation of Solution Manager 7.0 Stack 18 and higher|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1274430]
and the discussions here [Direct Upgrade from Solution Manager SP16 to SP26|Direct Upgrade from Solution Manager SP16 to SP26]
Thanks,
Jansi -
I cannot create a new Business Catalyst site with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with server, try again later. In addition, I am also unable to load remotely a previously created Business Catalyst site as it says there is something wrong with my username or password. However when I put my password in and press test connection, it says it has connected successfully. What is going wrong and how can I fix this problem?
ThanksHi Ozy08,
Can you try the solutions mentioned in Re: Can't Login to Business Catalyst within Dreamweaver CS6?
If you still have problems, and you have a purchased version of DW CC, send me your Adobe ID, location, and contact details over a private message. Click my picture and use the message option.
Thanks,
Preran -
Create or Update Business Partner in CRM ?
Dear Folks ,
Scenario is to Create or update Business partner in CRM from thirdparty system via PI
It would be great if you could clarify the following
Hope we have BAPI to create and Update Business partner in CRM system but my question is
1. Can we use any predelivered PI content - Message Interfaces - as proxies ( Server proxies ) to create BP from system ?
2. Same interface will work for Update as well ?
IF so what is that content ? where to find for our PI System ?
3. Can we use the same way for Client proxies as well when we want to update the business partner ?
4. What are the inbound and outbound Message Interfaces are available ?
Any help will be highly appreciated
Thanks.,
ShivaHi Ravi ,
I think that i am not described my question properly , Say i have CRM system where i have to create BP for this input comes from external system (forget about the system ) , Here i want to use Proxy (Server proxy ) which helps me create Business partner in CRM system .
Here my question is If sap delivers the Inbound interface ( where server proxy already generated by SAP) , which i will use to create BP ?
Can we do in this way ?
Thanks
Shiva -
BP: How to hide "Validity Period" on screen Create a new Business Partner
Hi,
On screen Create a new Business Partner, I want to hide field Validity Period
-> Please tell me how to do in Customizing
Thanks and Best regards
Ms.MinhHi,
For each BP role, you can control the field status in configuration under BP-Role Settings. Please check whether validity period is available for field configuration or not.
Regards
Prasad AV -
How to create a new business partner for notification with function module?
Hello,
I got a problem when I want to create a new Notification with its businiss partner (BAPI_ALM_NOTIF_CREATE). I can't find the proper way to create the new business partner. Anyone offer some help?
Thanks a lot!
Morganwhen I look at the function you can transfer the partner in NOTIFPARTNR table.
You must already have defined the appropiate partnerroll in customizing for you're businesspartner
or do you have another problem with this function ? -
Link one solution manager word document into another solution manager HTML
Hi,
I have requirement in solution manager that there are two documents uploaded into solution manager.
1. One word document in one of the project folder
2. HTML page in another folder of same project
I have to set up a hyper link of word document in the HTML web page.
If anyone has gone through this type of requirement, please let me know the details of how did you set up the link between word and HTML document.
Appreciate the early response.
Thanks,
SivaGo to the properties of the file you want to link your word document to. (attributes icon)
There you will find a button "Generate Document URL (F9)". Clicking this button will buffer the URL into clipboard.
Then you open your Word document in edit mode and paste the URL there.
source: Inserting a document into another in Solution Manager -
Incident management error: You are not assigned a Business Partner
Hi
I am facing a problem while creating message as below
error: You are not assigned a Business Partner
I created the BP. which has clear identification too.
Even this BP is maintained as Employee too.
Expecting ur valuable suggestions.
Regards,
SivaHi
Was this issue ever resolved?
I have the same problem.
I have business partners, also created as employees with their user id held in the Identification tab of the employee view in BP.
In the business partner Identification tab, they have the system ID>Installation No>client>user id maintained
When I go into solman_workcenter I see the message 'you are not assigned a business partner' and I cannot see any of the tickets assigned to me.
Has anyone had the same issue and resolved it?
Thanks for your help.
Ashley -
SAP Treasury Management-How to Config Tax codes for Business Partner
Hi SAP Gurus,
Please suggest me how to configure specific Tax Code and Tax relevant data for Business Partner in SAP Treasury Management while posting transactions with reference to any specific GL A/c. Kindly help me .
Thanks and advance
Regards
ShivanHi Appalas,
Check this link
Re: Linking of default taxes and discounts to BP
Tax Code
/people/arshdeep.singh/blog/2008/10/20/defining-a-new-tax-code-in-sap-business-one-2005-b-and-2007-b
Regards
Jambulingam.P
Edited by: Jambulingam P on Jun 22, 2009 12:39 PM
Edited by: Jambulingam P on Jun 22, 2009 1:20 PM
Edited by: Jambulingam P on Jun 22, 2009 1:21 PM -
Managed File Transfer - Cannot create any artifacts
Hi
I have issues creating anything in MFT. When I am in the Design tab, the create icon is grey.
I have installed Fusion Middleware Infrastructure and Managed File Transfer and made alle necessary configurations.
Can anyone tell me what might be wrong?
Br
AndyOK, I've got everything to work - so long as I 'Print' docs to PDF rather than clicking on the PDF conversion icons (if I click on these icons, I just get an error).
But if I print to PDF, everything now works - I've even managed to solve the Word problem - I think it was a faulty Word doc for some reason. I found a useful document which told me how to set up all the settings for Acrobat Distiller (http://mydocs.epri.com/docs/CorporateDocuments/WorkingWithEPRI/CreatingAcrobatPDFs.pdf).
If you know how to make the PDF conversion icons work (it must be something simple) that'll save me having to print each time, it would be great, but I can survive without this. -
Create a new Business Partner with LSMW
Hello,
We want to create a new BP using LSMW. We chose IDoc basic type CRMXIF_PARTNER_SAVE_M03. We want to create it with internal number assignment (we don't have BP ID or BP GUID). Unfortunatelly, when we leave PARTNER_NO and PARTNER_GUID fields empty, we get an error message that we should supply at least BP ID or BP GUID. So what values should we enter in order to create a BP with internal number assignment?
Thanks in advance,
Sergey KozyrevHello Sam,
We don't want to enter any IDENTIFICATIONUMBER because we don't want to see it after in the identification table for the created BP that is presented in the user WebUI. We only want to create a BP with internal number assignment and have an ability to enter all BP data. If it is not possible with IDocs, maybe there is some FM that can perform it?
Thanks in advance,
Sergey -
Can Inbound IDOC create a BP(Business partner) In SAP CRM system
Hi
Req:
Contractor data is transfered from ERP system to CRM using Message type HRMD_ABA with ALE Distribution Model in place.
Inbound IDOC is Successfully Posted when checked in WE05 in SAP CRM System.
Question :
1. Can an INBOUND Idoc create BP automatically or is there need of Configuration or Any custom program .
Appreciate Your Response
Bhanu Polsani
Edited by: Bhanu Polsani on Oct 4, 2011 6:10 PM
Edited by: Bhanu Polsani on Oct 4, 2011 6:16 PMYou can maintain two different address for the business agreements (can be treated as mailing address for the printed invoice)but you can not maintain more than one standard address for BP as any given time.
Regards,
Sanjoy -
Creating a Customer/Business Partner using Function Module in Background.
Does anyone know how to use the function module BAPI_ISUPARTNER_CREATEFROMDATA? I am unable to pass parameters exactly to this FM and make it work.
Hi,
unfortunately my system does not have this BAPI. However, with other BAPIs I have tried to read the relevant data using the corresponding BAPI_xxx_GETDETAIL BAPI - there usually is a "GETDETAIL" BAPI for every "CREATE" BAPI.
Simply read all the data for an object in your SAP system that has been created using SAP transactions and use this information to fill the "CREATE" BAPI. With a bit of trial and error, you should soon be able to supply the correct data.
Btw: Be shure to call BAPI_TRANSACTION_COMMIT afterwards!
Hope that helps (please reward me if it does),
Joerg -
Dynpro not found when create or change business partner
Dear friends,
I try to do some maintenance of business partner using tcode BP. An error has occur as below:
Anyone can help me.
Thanks in advance.
Runtime Errors DYNPRO_NOT_FOUND
What happened?
Error in ABAP application program.
The current ABAP program "SAPLBUSS" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
The program had to be terminated.
Error analysis
Program "SAPLBUSS" tried to use screen 7015.
The screen does not exist.
Trigger Location of Runtime Error
Program SAPLBUSS
Include LBUSSO00
Row 1,543
Module type (MODULE PBO)
Module Name PBO_START_SUBSCREENHi,
Please check the screen 7015, is active or not.
Regards
HM -
Solution Manager 4.0 and SLD automatic population
Our Solution Manager 4.0 installation was failing repeatedly while importing the CIM objects into the SLD. So here is what we did:
1.During installation we pointed the Solution Manager data supplier to the production SLD. The production SLD is on 640 wheras this is on 700.
2.After installation we created the Solution Manager (Admin) SLD by creating all necessary roles, groups, users and started importing the CIM and the delta.
3.We setup the data supplier of the production SLD to populate the Solution Manager (Admin) SLD. It looks like it is not getting populated and we got the following error in the production SLD:
#73 01/09/2007 12:39:15.173 [Thread-124] WARNING com.sap.lcr.sagent.BuilderDirector: Warning: SLD target system http://host:50100/sld sld/active not available (incoming data will be ignored).
Thrown:
com.sap.lcr.api.cimclient.CIMClientException: Received response is not a CIM Operation Response! Check "http://host:50100/sld" is the correct URL for the SLD CIM Object Manager and that user "user" has access to the SLD via http.
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:434)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:581)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:195)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:147)
at com.sap.lcr.api.cimclient.CIMOMClient.getCIMClass(CIMOMClient.java:538)
at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1185)
at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1196)
at com.sap.lcr.api.cimclient.CIMClient.ping(CIMClient.java:290)
at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:621)
at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:545)
at com.sap.lcr.sagent.BuilderDirector.run(BuilderDirector.java:459)
But this is the URL we use to go to the Solution Manager SLD!!! and the user is also correct.
1.I want to setup a way where the Solution Manager (Admin) SLD is populated from the production SLD every so often thru SMSY_SETUP -> Expert Settings -> Write back into SLD.
2.I want to use this Solution Manager (SLD) as the Admin SLD for NWA.
3.How do I know that the Object Manager of is up/down in the Solution Manager(SLD) and maybe restart it, while I can see that the SLD server is up.
3.I Manually setup some of the technical systems in the Solution Manager SLD by logging onto it http://host:port/sld, but I cannot see those in System Landscape in Solution Manager.
Can somebody please tell me how I can proceed from here.
A quick response would be appreciated with points.Hi, we have server AIX and ORACLE for SAP BI7, we have SP12 in ABAP area and SP9 in J2EE area.
So i need same SPs in ABAP and JAVA for multiples notes recomending that, and fix the GIS Maps in Web.
So BASIS sayme SM is not compatible by Hardware, i not understand.
We only need Solution for download SP13 and packages the Java Stack.
Some guide for check Harware Requeriments the SM ?
Exist some new update to ASAP for BI, looking the new versions ?
Maybe you are looking for
-
Cannot print with Brother HL-2140 (CUPS does not complain) [SOLVED]
I've got a brother HL-2140 which I've installed according to these instructions: http://wiki.archlinux.org/index.php/Brother_HL-2040. I am using the 2040 driver instead of the 2140 as there are reported issues with the 2140 driver and the 2040 drive
-
Powershell CSOM Sharepoint online list permission
I've been writing a script to connect to SharePoint online, create a document library and add some AD accounts to the permission. I've written all the code using snippets I have found through many searches but am having an issue with the permissions
-
Re-configure the WRT54G2 to work with the EnGenius 5611P repeater?
I looked around the messages, but could not find anything on this topic. I need assistance with the CISCO WRT54G2 V1. I have an EnGenius EOC5611P (500mW) Repeater set up in my RV and it connects directly to the PC inside my RV using, a CAT 5 connecti
-
When trying to get email, says "cannot connect to server"
set up email at store, everything was fine. then clicked mail and says "cannot connect to server", yet I can use safari, etc. deleted and re-added the email account
-
HI experts various steps involved in LO cockpit extractions
Hi experts , can some one tell me various steps invoved in LO COCKPIT extraction cheers thanks.