Solution manager 7.1 sizing
Hi, Any one can point to SolMan 7.1 sizing tool kit ? so far have seen 7.0 ehp1 sizing tool kit, but not for 7.1 yet.
Hi Patrick,
You may find the sizing guide for Solman 7.1 [here|https://websmp109.sap-ag.de/~sapidb/011000358700000756332011E.ZIP].
Check note 1583348.
1583348 - Documentation: SAP Solution Manager 7.1
[Section from note avove]
The "Sizing Guide SAP Solution Manager" is available on the SAP Service Marketplace under the following quick link: instguides
(http://service.sap.com/instguides) -> SAP Components -> SAP Solution Manager <current release> -> 1 Planning
BR,
Allam
Similar Messages
-
Install solution Manager 3.2 on NW
we have recently installed NW 04 (ABAP+Java) - is it possible to install SOLMON 3.2 or 4.0 on it now. if yes were can i find guide or any link.
thanxHi Shaik,
you can use the hardware of your NW to add the SAP Solution Manager 4.0 as a separate installation.
Check, whether the existing NW hardware (CPU, Main memory, disk space) is able to handle to load by the SolMan 4.0 installation.
See the SAP Solution Manager 4.0 sizing guidelines in SAP Service Marketplace:
Path: http://service.sap.com/solutionmanager -> Media Library -> Technical Papers -> Sizing of SAP Solution Manager 4.0
URL: http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700003431482006E
http://service.sap.com/~sapdownload/011000358700003431482006E
It's not possible to add the SAP Solution Manager Add-On to your existing NW system. SAP Solution Manager runs always as a separate installation with it's own System Id.
Best regards
Ruediger Stoecker -
Steps for solution manager sizing
Hi,
I could not see sizing for SAP solution manager in Sizing tool.
Pls let me know of where i can find ithi,
taken from
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b442d4ea-0c01-0010-a8ad-a4c2eaaf6b76]
it is told :
Do you have a rule of thumb concerning sizing?
For small and medium sized companies, there is no need to set up a high-end server if it is only used for the SAP Solution Manager and its monitoring functions. A small/medium-sized server is sufficient. However, this is dependent on your needs and future plans. The following sizing proposal is based on a standalone server with SAP Solution Manager only.
- For basic setup: 1 CPU current standard (min. 1 GHz), 1GB RAM, 50 GB hard disk space
- For advanced setup: 2 CPUs current standard (min. 1 GHz), 2 GB RAM, 50 GB hard disk space
The basic setup of SAP Solution Manager is defined as only having SAP EarlyWatch Alert and service level reporting, configured on the satellite systems and up to 5 users working at the same time on the SAP Solution Manager.
The advanced setup of the SAP Solution Manager requires additional steps after the basic setup is complete. The advanced features cover the configuration of system monitoring and/or business process monitoring. For further information, please refer to the sizing proposals for SAP Solution Manager 3.1 on the SAP Service Marketplace.
hope it help you.
rgds,
Alfonsus Guritno -
Sizing of SAP Solution Manager
I would like to know the answers for the following questions regarding the Sizing of SAP Solution Manager:
What is the explanation/definition of the following terms?
Low activity users
Medium activity users (two dialog steps/min.)
High activity users (10 dialog steps/hour)
P.S. I would like to implement ChaRM functionality.
Thank you very much!
regards
Thomcheck
http://service.sap.com/solutionmanager
--> FAQ
check there the answer to the question
"7. How many satellite systems can be connected to the SAP Solution Manager at the same time? Are there any rules concerning sizing?"
Markus -
How to install the Solution Manager
Hi Gurus,
any one can help me out i want to install the Solution Manager 4 any one can help me out like what is the minimum HDD & RAM is required, and how many exports wil required this Solman. Can i download from Market place please gurus help me out.
CheersDownload Solution Manager from
http://service.sap.com/instguides
--> Technology Components
Find the installation guide at
http://service.sap.com/instguides
--> SAP Components
--> Solution Manager
For sizing and other questions see note
1088980 - Documentation: SAP Solution Manager 4.0
Markus -
CPS on Solution Manager EHP1?
Folks,
Any idea whether we can install CPS in Solution Manager EHP1 (7.01) system with Java EHP1 (SP4)?
The CPS software is available under NW 7.0.
Regards
ChanduHello Cheeti,
you can install SAP CPS on SAP Solution Manager and SAP CPS is actually quite independent on Java support package (but choose the right NW release 7.01), i.e. you do not always have to update you SolMan system if you install a new CPS release.
However, if you read through the SAP CPS Installation Guide (Scheduling) you will find the recommendation to install SAP CPS on a separate server. That might not necessarily be the case for test or demo installations and of course also depends on your utilization of SAP CPS.
Have you considered these things:
Sizing: How does the ressource consumption of SAP Solution Manager influence you SAP CPS scheduler? Will important jobs be delayed?
Are there sufficient RFC resources for all application? (SolMan, Wiley, CPS all these application need to communicate with the managed systems)
Do you want to entangle the lifecylce management of SAP CPS with SAP Solution Manager? Which production do you want to update more/less frequently? Can you accept additional down times?
Kind regards,
Martin -
How to add a system into Solution Manager directory.
Hi!
Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
Also,
How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
AM I right?
regards,
Pratip BhattacharyyaHi Bratip Bhattacharyya,
SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
Bye
Message was edited by: Riccardo Escher -
We are planning to install Solution Manager and have arrived on following configuration based on what we could understand from Sizing tool and guide;
Intel Xeon Quad core with 16 GB RAM, 500 GB HDD - Win 2008 Enterprise-64 bit 25 user and SQL 2008 5 user.
we have around 30 customers sending approx 50 msgs per month.
Can anyone advice us if this is ok. We are from BOBJ background and have no exposure to any other technology of SAP.
Thanks & RegardsDear Mayank.
Thanks for your reply. We arrived at this sizing only after referring to that sizing guide. Main problem is that everywhere all Solution Manager refer to ABAP, SAP modules, BW etc., but there is no reference to Business Objects.
We are basically from Business Objects background and SAP has asked us to install Solution Manager. Though we have raised the case with SAP, there is no help coming. Net Weaver and other SAP terminology used in Solution Manager document is new for us.
We have succeeded in doing Basic installation, we are lost in the post installation steps. Guides available on the portal are not much of help as they are cryptic and there are too many references than clear steps. When you reach the end of references one gets lost and is more confused.
Can you give some help based on your experience? first of all it is not clear to us as how Solution Manager works? SAP guys instead of giving a brief 3-4 sentence answer, send us the same solution manager documents links which we have referred before going to SAP.
Thanks & Regards
Piyush -
Solution Manager systems RAM requirements - problems with the Java Engine
Hello,
I am about to install SAP Solution Manager 7 on a WIndows 2003 Server x64 but I need to know what the RAM requirements are? I have been having problems with the Java Engine starting and it seems to time out, I have heard that this is a very RAM hungry process and it might be why?
Many thanks for your help in advance,
OmarHello Omar,
To size SAP Solution Manager 7.0 EHP1 we recommend to use the SAP Solution Manager Quicksizer Tool at:
http://service.sap.com/sizing-solman
Here you find information on how to use the tool, how to collect input data for E2E Scenario Sizing, on SAP E2E RCA Sizing, Introscope Tuning, Wily Enterprise Manager Cluster Setup for E2E RCA Scenario and BI Aggregation Strategy in E2E Scenario.
Please find more information about installing Solution Manager in:
http://service.sap.com/instguides -> SAP Solution Manager
I hope this information helps.
Thanks,
Mark -
How to install both solution manager and ECC Development on same server
Hi All,
Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
Pls let me know.
Regards,
KarthikHi Karthik,
I try to answer you message, my answer may not be sufficient for you.
Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
Verify sizing of both systems.
SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
Best regards,
Ruediger Stoecker -
Where has to be defined the SLD? PI/XI or Solution Manager?
Hello,
We have a PI production system, already configured and working. Now we are implementing the solution manager system. In both cases we only have productive systems. In which one should we define the SLD?
Thanks and kind regards,
AnaHi
Generally I would not recommend to have a Solution Manager Central SLD also used for Productive PI operations
although this is possible to do
We have seen situations whereby issues on the Solution Manager J2EE could affect PI operations generally the Solution Manager J2EE will be used for different purposes and may require different system administration. The dual purpose may also
have performance or sizing implications - technically any sizing done would have been for separate purposes.
The SLD for PI is needed for productive runtime (although there is a XI cache - even so I have seen situations whereby
this cache has limitations)
Customers often opt for the following
Central SLD running on the Solution Manager J2EE stack
Local PI SLD running on a PI J2EE stack
This is because the SLD service is available on any J2EE installation
You can then sync the local PI SLD to the Central SLD in order to build a full system list of all systems in the landscape
see the SLD planning guide at System Landscape Directory (SLD) for details
Best wishes
Stuart -
How to install both solution manager and ECC Development
Hi All,
Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
Pls let me know.
Regards,
KarthikHi Karthik,
I try to answer you message, my answer may not be sufficient for you.
Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
Verify sizing of both systems.
SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
Best regards,
Ruediger Stoecker -
FREE SAP Solution Manager Simulations, eBooks and Presentations
Learning on Demand by SAP ([LoD|https://lod.sdn.sap.com/]) has recently been updated with approximately 100 FREE Simulations and eBooks, some of which relate to SAP Solution Manager. SAP Simulations and eBooks are a convenient way of obtaining SAP training on new topics or updating your existing knowledge on new product releases.
Examples of the free Solution Manager elearning resources available on LoD include:
- SAP Solution Manager Use Cases
- Global Roll-out
- Sizing SAP Solution Manager
Click [FREE SAP elearning content|https://cart.lod.sdn.sap.com/pages/FreeContent/lod_free_courses.htm] to review the new elearning content and start Learning Now!Hi Shane,
Thanx for sharing the information.
Regards
Spree -
Hi, All:
My question is about the Solution Manager's Landscape. Normally, do we need 3-tier (DEV-QAS-PRD) landscape for Solution Manager implementation or only 1 Solution Manager to be installed is ok?
Any info will be highly appreciated!
Thanks!
Best Regards,
DavidHi David,
Thank you for the reward points.
Regarding the landscape - Have not come across any document of that sort. People suggest based on experience.
Sizing for solution manager - You can get the document from the below link in service market place.
<a>https://websmp102.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=501100035870000009816&_HIER_KEY=601100035870000192213&_HIER_KEY=701100035871000457214&_OBJECT=011000358700000255562007E&_SCENARIO=01100035870000000202&</a>
best regds,
Alagammai. -
Solution Manager Implementation
Hi All,
I am new to Solution manager,my company decided to implement Solution manager.Can anybody tell from where to start in implementing this.Is there any alternative for infopack.What is the best practice for implementing and what need to be considered.
Thanks in AdvanceHi,
Please check below links are very useful:
sap solution manager configuration setup:
http://wiki.sdn.sap.com/wiki/display/SMSETUP/Home
Change Request Management scenario:
/people/dolores.correa/blog/2009/08/27/change-request-management-scenario-retrofit-functionality
Service desk configuration guide:
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
How to Configure Solution Manager through maintanance optimizer:
How to Configure Solution Manager for 1.Download SuppPacks 2. Monitoring 3
System monitoring Configuration guide:
/people/federico.babelis2/blog/2006/04/25/system-monitoring-configuration-guide-for-dummies
CCMS Rule Based Monitors configuration guide:
/people/federico.babelis2/blog/2006/04/26/ccms-rule-based-monitors-configuration-guide-for-dummies
Service Data Control Center configuration guide
/people/federico.babelis2/blog/2006/04/23/sdcc--service-data-control-center-configuration-guide-for-dummies
Guides download link:
https://websmp102.sap-ag.de/sizing
https://websmp102.sap-ag.de/instguides
https://websmp102.sap-ag.de/solutionmanager
https://websmp102.sap-ag.de/EWA
https://websmp102.sap-ag.de/swdc
Regards,
kalees
Maybe you are looking for
-
I got the following issue after upgrade to 11.1.1.5 ####<May 21, 2011 12:33:01 PM ART> <Error> <Deployer> <wuhan.ar.most> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <df6f0ceab78a216
-
Panning and scaling inside a mask
I'm wondering if it's possible to animate a scale of a layer independent of it's mask so that the mask stays locked but the layer moves. Like in Photoshop you can unlink the mask from the layer. The only way I can see how to do this is to pre-comp th
-
Account Disabled by Apple Staff
My account was disabled by Apple Staff as they misunderstood my complaint. Now they are telling me they cannot enable it as ACCOUNT SECURITY can only do it. They have told me to call ACCOUNT SECURITY to get the account enabled again but the numbers t
-
PDFs not printing from Acrobat Reader 7.0.8
PDF don't print from Acrobat Reader 7.0.8. The same PDFs print from Preview. I've tried many PDF from various sources (over a dozen including those created on my Mac) in every case they print fro Preview and not from Reader. I'm currently on OS 10.4.
-
28 failed attempts for restricted password need help to get in my settings
Forgot my password in settings restricted failed 28 times how do I fix it