Solution Manager 7.1 SP4: Session Timeout during SOLMAN_SETUP

Hello Experts,
We recently installed Solution Manager 7.1 SP4 on Linux/Oracle. We also completed the System Preparation and Basic Configuration part of the SOLMAN_SETUP wizard as well (which includes applying the Central Correction Note and other steps).
During the Managed System Setup Part, as soon as we click on the Configure System for a managed system - a new window opens up and immediately we get the below timeout messages:
This session will terminate due to inactivity in 0:00 minutes
To continue working in this session, choose 'Continue Session'
The above is immediately followed by the actual session timeout message:
This session terminated due to inactivity.
Click Close Popup
or to start new session, press F5.
Now even if we press F5/Refresh, the same cycle repeats.
I already checked the ICM timeout parameters as mentioned in the Guide and further findings with regards to ITS update as in thread WEBGUI Timeout immediately after logging in
Applying the latest kernel patch also did not help. The strange issue is that the session timeout occurs only the LMDB related services, wherease normal services like WEBGUI etc work fine.
Please suggest if anyone came across this issue, especially after update to SP04.
Thanks and Regards,
Srikishan

Hi,
Thanks, I will check the note steps and close this thread accordingly.
Perhaps I need to hone my notes searching skills !
Regards,
Srikishan

Similar Messages

  • Solution Manager EWA - cannot create session in satellite system

    "Hi,
    I want to configure EWA self service using Solman 4.0. I succesfully did the following :
    a. Maintained SMSY and create the required trusted RFC connections from SM to satellite system. All connection and authorization passed in SM59. I used SAP_ALL/SDCCN_ALL role and assigned objects S_RFC*.
    b. Assigned the system to a logical system.
    c. Created the a new solution and activate "Solutions Monitoring > Earlywatch Alert"
    d. Activated and maintained required RFC in SDCCN in satallite system.
    My problem is that the create EWA alert request (Red Flag with a specific session number ) coulnd be pass to the satelitte system even though all the trusted RFC and authorization is set. When i execute the SESSION_REFRESH in the satellite system, the session is not created.
    Did I miss out any steps. Can any one share any help ?
    FYI, there is no connection to SAPOSS yet, so i did not manage to run RTCCTOOL completed, but i doubt this is required for EWA self service."
    I  have the same problem as Solution Manager EWA - cannot create session in satellite system
    tried all of solutions,  but it does not help... Created the CM (high) for SAP, but get 1 response for 1 week from them:(

    Dear Sapbcer,
    Have you tried the following option :
    Execute SMSY and from the Server entry Execute the "Read System Data Remote" option in change mode.
    Save the data captured and then try using Refresh Session Task from SDCCN of the satellite system. Do select the RFC for Solution Manager while performing this task.
    Hope this helps.
    Regards
    Amit

  • Manage Substitutes in Solution Manager 7.1 SP4

    Hello,
    I made configuration according to pdf:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a026ba4e-d5fa-2d10-4995-8e516dd372b0
    It works fine in tx. SOLMAN_WORKCENTER but it is possibility to working at web browser ITSM Solution Manager 7.1 SP4 ?.
    Please advise, if this functionality is possible at web browser.
    Further information [here|http://pokazywarka.pl/3k9td2/] and [here|http://pokazywarka.pl/e5bars/] .
    Thank you in advance.
    Best regards,
    SAPFan

    Hello
    How about asking Tammy Powlas, she is a SAP Mentor, volenteer for ASUG and highly active within the SAP community. I'm sure she wouldn't mind answering your question. You can even tweet iher this question url as she is also active on Twitter @tpowlas.
    I can't help you out though by giving a meaninful answer to the question since I'm not familiar with these settings.
    Best regards
    Tom
    PS: While SAPFan sounds cool I prefer writing a response to a person instead of an avatar, just a hint, if you use your real name people will take you more seriously on SCN.

  • Solution manager 7.1 sp4 , error @Bytecode adpater installation

    HI All,
        I am facing the below issue while executing the managed system wizard @ Bytecode adapter installation.
    Error @ Managed system
    Failed to create Introscope Agent Connector at: /usr/sap/SMD/SMDA98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/connectors: - java.io.IOException: Cannot run program "null/bin/java" (in directory "/usr/sap/SMD/SMDA98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/connectors"): java.io.IOException: error=2, No such file or directory.
    Error @ Diagnostic agent level
    Jun 6, 2014 10:52:31 AM [Thread[Thread-19,5,main]               
    ] Error
    Operation Failed :
    [EXCEPTION]
    com.sap.smdagent.vmmanager.VMManagerException: Failed to get Instance properties - 48161
    at com.sap.smdagent.vmmanager.impl700.VMManager._getSettings(VMManager.java:170)
    at com.sap.smdagent.vmmanager.impl700.VMManager.getSettings(VMManager.java:156)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.sap.smd.server.exec.asio.AsioInvocationHandler$1.call(AsioInvocationHandler.java:94)
    at com.sap.smd.server.util.concurrent.FutureResult$1.run(FutureResult.java:90)
    at com.sap.smd.server.exec.asio.AsioInvocationHandler$AsioRunner.run(AsioInvocationHandler.java:285)
    at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:46)
    at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:785)
    at java.lang.Thread.run(Thread.java:679)
    Caused by: java.lang.SecurityException: User is not authorized to access Configuration Manager.
    at com.sap.engine.services.configuration.ConfigurationRuntimeInterfaceImpl.checkAuthorization(ConfigurationRuntimeInterfaceImpl.java:62)
    at com.sap.engine.services.configuration.ConfigurationRuntimeInterfaceImpl.getConfigurationContext(ConfigurationRuntimeInterfaceImpl.java:48)
    at sun.reflect.GeneratedMethodAccessor392.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:331)
    at com.sap.engine.services.rmi_p4.P4DynamicSkeleton.dispatch(P4DynamicSkeleton.java:159)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:336)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    1. As per standard note , patch levels are on sap recommended level only.
    2. Created connector manually as per wily documentation , but still no use.
    3. Given the permissions for temp,<SID>cluster etc.. as per sap notes and restarted all the services including sapstartsrv
    4. Assigend SPML roles as suggested by note.
    5. checked java environment and umask  for diagnostic users , everything looks ok.
       Checked couple of notes related to the above issue ,
       1616058 - XSRF possible in SPML Services in AS Java
       1820230 - Byte Code Adapter Installation error in Solution Manager 7.1 Managed System Configuration step Configure Automatically
        1752441 - Introscope Agent Connector generation is done using JDK at: null

    I would like paste few more error lines,
    Jun 9, 2014 6:43:33 AM [Thread[FileSystemService_4cdecd7c,5,main]
    ] Error 
    [WHS] Failed to find javaPath for node 5818350
    [EXCEPTION]
    com.sap.smdagent.vmmanager.VMManagerException: Failed to get Instance properties - 58183
    at com.sap.smdagent.vmmanager.impl700.VMManager._getSettings(VMManager.java:170)
    at com.sap.smdagent.vmmanager.impl700.VMManager.getSettings(VMManager.java:156)
    at sun.reflect.GeneratedMethodAccessor298.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.sap.smd.server.exec.asio.AsioInvocationHandler$1.call(AsioInvocationHandler.java:94)
    at com.sap.smd.server.util.concurrent.FutureResult$1.run(FutureResult.java:90)
    at com.sap.smd.server.exec.asio.AsioInvocationHandler$AsioRunner.run(AsioInvocationHandler.java:285)
    at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:46)
    at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:785)
    at java.lang.Thread.run(Thread.java:679)
    Caused by: java.lang.SecurityException: User is not authorized to access Configuration Manager.

  • RFC connection results in "Timeout during connection setup"

    Hello Guys,
    The RFC ABAP connection to the Solution Manager encounters connection error: "/ CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242#Timeout during connection setup."
    The Solution Manager has following details:
    SAP Solution Manager (700 15)
    ORACLE 10.2.0.2.0
    HP-UX
    The R/3 QAS Customer 1 system has following details:
    SAP R/3 Enterprise (620 54)
    ORACLE 9.2.0.8.0
    HP-UX
    The R/3 QAS Customer 2 system has following details:
    SAP R/3 Enterprise (620 59)
    ORACLE 9.2.0.8.0
    HP-UX
    The RFC ABAP connection from <SID Solution Manager> -> <SID R/3 QAS Customer 1> is working correctly.
    The RFC ABAP connection from <SID R/3 QAS Customer 2> -> <SID Solution Manager> is working correctly.
    The RFC ABAP connection from <SID R/3 QAS Customer 1> -> <SID Solution Manager> encounters connection error:
    ERROR                timeout during allocate                       
    LOCATION             SAP-Gateway on host hemisrq.services.retail.tc.services.retail.tc / sapgw01
    DETAIL               no connect of TP sapdp02 from host conssmp.servom host <host name Solution Manager> after 22
    COMPONENT            SAP-Gateway                                   
    COUNTER              1152                                          
    MODULE               gwr3cpic.c                                    
    LINE                 1820                                          
    RETURN CODE          242                                           
    SUBRC                    0                                         
    RELEASE              640                                           
    TIME                 Thu Jun  5 10:55:15 2008                      
    VERSION              2                                             
    Here's the dev_rfc0 log file
    Trace file opened at 20080605 101956 METDST SAP-REL 640,0,235 RFC-VER 3 985555
    ======> CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242                               
    Timeout during connection setup. Please check partner availability                
    ABAP Programm: RSRFCPIN (Transaction: SM59)                                       
    Called function module: RFC_PING                                                  
    User: SAPBEHEER (Client: 000)                                                     
    Destination: <SID Solution Manager>CLNT010 (handle: 2, , {4846C6DC-14A2-0F1F-E100-0000AC1B29D8})     
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2277                                   
    CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242                                       
    Timeout during connection setup. Please check partner availability                
    HOST =<host name Solution Manager>                                                  
    SERV =sapdp02                                                                     
    Checked the error code 242 "GW_TIMEOUT" and found:
    Connection setup to the remote gateway has been closed because timeout has been exceeded.
    The time limit can be set in parameter gw/timeout.
    Changed parameter gw/timeout to value 10000, but still encounter same error message.
    From OS level <SID R/3 QAS Customer 1> i can ping the <host name Solution Manager>.
    fvb1:/home/stampg$>ping <host name Solution Manager>
    PING <host name Solution Manager>: 64 byte packets
    64 bytes from 172.27.68.239: icmp_seq=0. time=1. ms
    64 bytes from 172.27.68.239: icmp_seq=1. time=1. ms
    64 bytes from 172.27.68.239: icmp_seq=2. time=1. ms
    64 bytes from 172.27.68.239: icmp_seq=3. time=1. ms
    64 bytes from 172.27.68.239: icmp_seq=4. time=1. ms
    64 bytes from 172.27.68.239: icmp_seq=5. time=1. ms
    conssmp.services.retail.tc PING Statistics----
    6 packets transmitted, 6 packets received, 0% packet loss
    round-trip (ms)  min/avg/max = 1/1/1
    Any suggestions where to look ?
    Regards,
    Gidion

    Hello Gidion,
    can you please verify the hostnames/FQDN's? Because:
    LOCATION SAP-Gateway on host hemisrq.services.retail.tc.services.retail.tc / sapgw01
    host hemisrq.services.retail.tc.services.retail.tc
    It seems to me that somewhere the domain is double used.
    Additionally:
    Sometime there is sapgw 01, sometime sapdp 02. Can you please check the correct service numbers / system numbers?
    Regards
    Holger

  • Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'  (managment cockpit)

    Hi Friends,
    I'm getting following error, while accesing BI query data in management cockpit.
    ODBO Error:
    timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
    Pls suggest me steps to resolve issue.
    thanks,
    naresh

    Naresh,
       Couple  of  suggestions...If  this  thread is   still  relevant....or  please  close  this  thread...
    1)  Make sure  you are   not  having any  issues  with  running  the  query, try  running  it  directly  in BEX/RSRT.
    2)Once  we  know  that  there  is  no  issue  with  teh  query...try  running  the  Trace  on the  user (ST05)  to get further details  on  the error  by  trying  to  run  it  from  management  cockpit..
    3) Check    Note 1285242 - CPIC-CALL: 'ThSAPCMRCV' no data received.
    Hope this  helps..
    Vishal.

  • ODBO Error: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

    Hi Friends,
    I'm getting following error, while accesing BI query data in management cockpit.
    ODBO Error: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
    Pls suggest me steps to resolve issue.
    thanks,
    naresh

    hi,
    i have query data in BI report and that is released for external access. I want to show that data in frame of managment cockpit based on key figure and characterstic.  Simple query(region wise sales) with one char, two keyfigures & one time char and created mesure also. I want to show data in column chart.
    when i checked in frame, error log: system says:
    Error:  ODBO error
    Details:    Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
    ours is bi7 system.  issue not resolved ..pls suggest me steps to resolve this.
    thanks,.

  • Monitoring customer's systems in Solution Manager 7.1

    Hello gurus.
    I have successfully added our internal system to our Solution Manager 7.1 SP4 running on Oracle 11.2.0.2.
    And now I'm wondering is it possible to add customer's systems to our Solution manager? There are some unclear moments one of which SLD configuration (RZ70, SLDAPICUST).
    Does anyone have such an experience or maybe can help with links to documents or SAP notes.
    Thank you!

    Hi Alexey,
    everything you need to know is in the "SAP Solution Manager operations"
    document under
    http://service.sap.com/solutionmanager
    -> Media library
       -> Documentation
    if you have problems with the communication between the SLD and the SolMan
    check document SAP Solution Manager Landscape Setup Guide
    under  http://service.sap.com/diagnostics
    -> Media Library
    and note 1148028 - Setup SLD in the scope of Solution Manager 7.0
    If you are curious about the SLD architecture in general you can also have a look at
    http://service.sap.com/sld
    regards, Javier

  • Error in Phase during installation Solution Manager 7.1

    Dear all,
    when I want to install the Solution Manager 7.1 it comes an error during a installation phase.
    The log of the error (JAVA) is:
    ConfigMainExt state200
    TYPE=A<BR>STATE=<BR>INFO_SHORT=com.sap.security.core.server.destinations.api.DestinationException: com.sap.security.core.server.destinations.api.DestinationException: [destination_0000] No such destination of type WebService exists.
         at com.sap.security.core.server.destinations.service.DestinationServiceImpl.getDestinationNames(DestinationServiceImpl.java:278)
         at com.sap.ctc.util.DestinationConfig.maintainDestination(DestinationConfig.java:122)
         at com.sap.ctc.util.DestinationConfig.maintainWebServiceDestination(DestinationConfig.java:93)
         at com.sap.ctc.util.DestinationConfig.performFunction(DestinationConfig.java:50)
         at com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:74)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    //   => Maintaining Destination Service: sap.com/tcwdpdfobject/com.sap.tc.webdynpro.adsproxy.AdsProxy/ConfigPort_Document
    ERROR: Destination Service not available! // No such destination of type WebService exists.
    <BR>CONFIGURATION=
    Can anyone tell me what it is?

    Hello,
    What phase of the installation does this error occur?
    Is it failing to start the Java Engine?
    The reason I ask is the JVM will fail until you have set the java parameters, and you can't do that until the j2ee/configtools directory is created and you can run configtools, and that doesn't happen untilt eh start of the JVM phase, and then it always fails because the MAXHEAP is set too low by default and other parameters need setting. Then when the Install is re-started it can start the JVM and continue.
    This is not mentioned in the install guide. However if you are failing in another step, you would need to mention what step.
    You need to name the log you are showing the error, because it may or may not be the right log to look at, or it may be an error, but is not the cause. So if my guess is not right, please specify the phase name it fails and the log you reference, because there may be other logs that have better information as to why it failed. One you should check is dev_server0, in work.
    Regards,
    Paul

  • Error during Solution Manager Installation

    I'm trying to install Solution Manager on a Windows 2003 and MS SQL 2005 database and keep receiving the following error:
    WARNING[E] 2008-10-10 16:56:18.643
    CJS-30149  ABAP processes of instance SOL/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:30 minutes. Giving up.
    ERROR 2008-10-10 16:56:19.222
    FCO-00011  The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start was executed with status ERROR .
    Can anyone help?

    Hi Markus,
    I am getting the same erros during installation BI7.
    the server already running one BI7 instance on it as development serevr.
    & same server we are using for the PRD instance. which giving the error for the Phase 27 - start Instance.
    Installation for dev server we configured Local SLD. & for
    PRD used to register in exisitance SLD in which I use the HTTP Port 50000 may be it was the problem deu to this if the Port is wrong.
    see the trace file.
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      05
    sid        BIP
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    144
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        7968
    Sat Oct 25 11:50:40 2008
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (05 7968) [dpxxdisp.c   1243]
         shared lib "dw_xml.dll" version 144 successfully loaded
         shared lib "dw_xtc.dll" version 144 successfully loaded
         shared lib "dw_stl.dll" version 144 successfully loaded
         shared lib "dw_gui.dll" version 144 successfully loaded
         shared lib "dw_mdm.dll" version 144 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3905
    Sat Oct 25 11:50:51 2008
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0134.qqq.nxst) took 11 seconds
    Sat Oct 25 11:51:07 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >abgsapbi_BIP_05                         <
    DpShMCreate: sizeof(wp_adm)          25168     (1480)
    DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000EE70050, size: 6348592)
    DpShMCreate: allocated sys_adm at 000000000EE70050
    DpShMCreate: allocated wp_adm at 000000000EE72150
    DpShMCreate: allocated tm_adm_list at 000000000EE783A0
    DpShMCreate: allocated tm_adm at 000000000EE78400
    DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
    DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
    DpShMCreate: allocated comm_adm at 000000000F3E3FA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
    DpShMCreate: allocated gw_adm at 000000000F46ACB0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F46ACE0
    DpShMCreate: allocated wall_adm at 000000000F46ACF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    <ES> Info: em/initial_size_MB( 24573MB) not multiple of em/blocksize_KB( 4096KB)
    <ES> Info: em/initial_size_MB rounded up to 24576MB
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    ERROR => <EsNT> CreateFileMapping name=ES_SEG_05_006 error=1455 [esnti.c      1184]
    ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c      1186]
    Memory diagnostic                                 *
    Systeminformation
    Processor-Typ             : Processor-Count           : 8
    Operating System          : NT 5.2, Build 3790
    Service Pack              : Service Pack 2
    NT Pagefile Informations
    Config. minimum size      : 22016000 K
    Config. maximum size      : 28672000 K
    Avail.  maximum size      : 28672000 K
    Num
    Pagefile
    Min.Size
    Max.Size
    Avail.Max
    Curr.Size
    1
    c:\pagefile.sys
    6144000 K
    8192000 K
    8192000 K
    8192000 K
    2
    d:\pagefile.sys
    4608000 K
    6144000 K
    6144000 K
    6014664 K
    3
    e:\pagefile.sys
    6144000 K
    8192000 K
    8192000 K
    8115200 K
    4
    f:\pagefile.sys
    5120000 K
    6144000 K
    6144000 K
    6144000 K
    NT Task Manager Informations
    Total Handles             :        0
    Total Threads             :        0
    Total Processes           : 2010476683
    Commit Charge Total       :        0 K
    Commit Charge Limit       : 2143554319 K
    Commit Charge Peak        :     2047 K
    Phys.Memory Total         : 131657184 K
    Phys.Memory Available     :        0 K
    File Cache                : 2143594271 K
    Kernel Memory Total       :     2047 K
    Kernel Memory Paged       :   393225 K
    Kernel Memory Nonpaged    :     5894 K
    Memory usage of current process
    Total virt.address space  : 0000008589934464 K
    Avail.virt.address space  : 0000008589013404 K
    Private Pages             :        0 K
    Total heap size           :    23195 K
    Virtual memory regions    :        0 K
    Uncommitted heap memory   :    14544 K
    Allocated heap memory     :     7042 K
    Moveable heap memory      :     1137 K
    DDE shared heap memory    :        0 K
    Memory usage of all processes
    PID
    Image
    Instance
    Work.Set
    WS Peak
    Priv.Pages
    PP Peak
    Pg Fault
    7372
    sapstartsrv.exe
    19208 K
    19208 K
    21264 K
    21772 K
    6
    6744
    msg_server.EXE
    [MS] BIP_05
    10680 K
    10680 K
    14004 K
    14008 K
    2
    7968
    disp+work.EXE
    42124 K
    42276 K
    74364 K
    81588 K
    10
    8100
    igswd.EXE
    [**] BIP_05
    3924 K
    4204 K
    2892 K
    3252 K
    1
    7904
    igsmux.exe
    14484 K
    14484 K
    18080 K
    18084 K
    3
    7176
    igspw.exe
    3376 K
    3376 K
    3704 K
    3704 K
    0
    3596
    igspw.exe
    3376 K
    3376 K
    3704 K
    3704 K
    0
    Sum
    97172 K
    138012 K
    Error 11 while initializing OS dependent part.
    ERROR => DpEmInit: EmInit (1) [dpxxdisp.c   9634]
    ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c   9561]
    DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sat Oct 25 11:51:17 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Sat Oct 25 06:21:17 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    0 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    1 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    2 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    3 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    4 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    5 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    6 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    7 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    8 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    9 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    10 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    11 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    12 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    13 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    14 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    15 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    16 ?         -1 Free          no      0   0        0                                                                         
    Dispatcher Queue Statistics               Sat Oct 25 06:21:17 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    0
    2000
    0
    0
    --------++++--
    +
    DIA
    0
    0
    2000
    0
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          0
    wake_evt_udp_now     0
    wake events           total     0,  udp     0 (  0%),  shm     0 (  0%)
    since last update     total     0,  udp     0 (  0%),  shm     0 (  0%)
    Dump of tm_adm structure:               Sat Oct 25 06:21:17 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Sat Oct 25 06:21:17 2008
    =============================
    Slots: 300, Used: 0, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sat Oct 25 11:51:22 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >abgsapbi_BIP_05                         < (normal)
    DpJ2eeDisableRestart
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Terminate gui connections
    wait for end of work processes
    not attached to the message server
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 7968) [dpxxdisp.c   10421]
    Good Bye .....
    Thanks & Regards,
    Darshan...

  • What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

    Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

    Any call made from the API will automatically be set to the “Session Timeout” period, no matter
    what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
    Short Session Timeout and Session Timeout in Excel Services
    Short Session Timeout and Session Timeout in Excel Services - Part 2
    Sessions and session time-outs in Excel Services
    above links are from old version but still applies to all.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Problem during installation of Solution Manager

    Hi All,
    I am facing problem during the installation of solution manager. it shows following error during installation
    ERROR 2010-05-21 14:39:24
    FJS-00003  TypeError: this._name has no properties (in script NW_Doublestack_SCS|ind|ind|ind|ind, line 5140: ???)
    ERROR 2010-05-21 14:39:25
    FCO-00011  The step collect with step key |NW_Doublestack_SCS|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
    Please also let me konw how much space do we require for installating the Solution manager as a central system on one drive?

    Hi Chandan,
    Well may be below SDN thread will help you... out ! try out with Curd Abstoss Response !!
    Inst. SAP NW 2004s Java SP9 - Error FJS-00003 this._name has no properties
    Hope it will work for you..as well !

  • Errors during install of Solution Manager 7.0 w/MaxDB (central)

    Hi
    I am trying to install Solution Manager 7.0 w/MaxDB on a linux box. I have reached phase 47/50 and am running into errors that say:
    ERROR 2011-07-14 16:29:54.609
    CJS-30151  Java process server0 of instance OSM/DVEBMGS00 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 1:30 minutes. Giving up.
    ERROR 2011-07-14 16:29:54.757
    FCO-00011  The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|6|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|startJava was executed with status ERROR ( Last error reported by the step :Java process server0 of instance OSM/DVEBMGS00 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 1:30 minutes. Giving up.).
    Here is the java version I am using (JVM 4.1)
    atl-osm-01:osmadm 80> java -version
    java version "1.4.2_30"
    Java(TM) 2 Runtime Environment, Standard Edition (build 4.1.009)
    SAP Java Server VM (build 4.1.009 17.0-b16, May 27 2011 00:12:32 - 41_REL - optU - linux amd64 - 6 - bas2:154157 (mixed mode))
    in the dev_jcontrol log I see:
    -> lib path = LD_LIBRARY_PATH=/opt/java/sapjvm_4/jre/lib/amd64/server:/opt/java/sapjvm_4/jre/lib/amd64:/opt/java/sapjvm_4/jre/../lib/amd64:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/tmp/sapinst_exe.26924.1310559612:/usr/sap/OSM/SYS/exe/run:/sapdb/programs/lib:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib:/usr/sap/OSM/DVEBMGS00/j2ee/os_libs:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/SYS/exe/run:/sapdb/programs/lib
    -> exe path = PATH=/opt/java/java/bin:/usr/sap/OSM/DVEBMGS00/j2ee/os_libs:/sapdb/programs/bin:/opt/java/java/bin:.:/home/osmadm:/usr/sap/OSM/SYS/exe/run:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/opt/dell/srvadmin/bin
    [Thr 47171544096752] JStartupICreateProcess: fork process (pid 5857)
    [Thr 47171544096752] JControlICheckProcessList: process server0 started (PID:5857)
    [Thr 47171544096752] Thu Jul 14 16:29:19 2011
    [Thr 47171544096752] JControlICheckProcessList: process server0 (pid:5857) died (RUN-FLAG)
    [Thr 47171544096752] JControlIResetProcess: reset process server0
    [Thr 47171544096752] JControlIResetProcess: [server0] not running -> increase error count (4)
    [Thr 47171544096752] JControlICheckProcessList: running flight recorder:
            /opt/java/java/bin/java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID3888650 1310675354 -bz /usr/sap/OSM/SYS/global
    In the dev_w12 trace log I see:
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Gateway on host atl-osm-01 / sapgw00
    M  *  ERROR       program SLD_UC not registered
    M  *
    M  *  TIME        Thu Jul 14 16:25:52 2011
    M  *  RELEASE     700
    M  *  COMPONENT   SAP-Gateway
    M  *  VERSION     2
    M  *  RC          679
    M  *  MODULE      gwr3cpic.c
    M  *  LINE        1778
    M  *  DETAIL      TP SLD_UC not registered
    M  *  COUNTER     3
    M  *
    M  *****************************************************************************
    M
    A  RFC 1485  CONVID 80159271
    A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
    A  RFC> ABAP Programm: RSLDAGDS (Transaction: )
    A  RFC> User: DDIC (Client: 001)
    A  RFC> Destination: SLD_UC (handle: 1, , )
    A  *** ERROR => RFC ======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered
    [abrfcio.c    8141]
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
    CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered
    DEST =SLD_UC
    HOST =%%RFCSERVER%%
    PROG =SLD_UC
    GWHOST =atl-osm-01
    GWSERV =sapgw00
    [abrfcio.c    8141]
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE
    B  table logging switched off for all clients
    S  handle memory type is RSTSPROMMM
    Any ideas on how I can fix this? Anything else that I should post that will help with analyzing the issue?
    Thanks in advance!

    Hi Sunny -
    Thank you for your quick response. I will have to ask a beginner's question now, but how do I restart the system manually? Is that just the startsap/stopsap scripts that I need to run?
    How would I know if the server0 is actually up and running after restarting?
    Also, Here is the dev_server0 log (I am posting snippets of the logs as they repeat):
      1
       2 -
       3 trc file: "/usr/sap/OSM/DVEBMGS00/work/dev_server0", trc level: 1, release: "700"
       4 -
       5 node name   : ID3888650
       6 pid         : 5639
       7 system name : OSM
       8 system nr.  : 00
       9 started at  : Thu Jul 14 16:28:59 2011
      10 arguments         :
      11           arg[00] : /usr/sap/OSM/DVEBMGS00/exe/jlaunch
      12           arg[01] : pf=/usr/sap/OSM/SYS/profile/OSM_DVEBMGS00_atl-osm-01
      13           arg[02] : -DSAPINFO=OSM_00_server
      14           arg[03] : pf=/usr/sap/OSM/SYS/profile/OSM_DVEBMGS00_atl-osm-01
      15           arg[04] : -DSAPSTART=1
      16           arg[05] : -DCONNECT_PORT=60140
      17           arg[06] : -DSAPSYSTEM=00
      18           arg[07] : -DSAPSYSTEMNAME=OSM
      19           arg[08] : -DSAPMYNAME=atl-osm-01_OSM_00
      20           arg[09] : -DSAPPROFILE=/usr/sap/OSM/SYS/profile/OSM_DVEBMGS00_atl-osm-01
      21           arg[10] : -DFRFC_FALLBACK=ON
      22           arg[11] : -DFRFC_FALLBACK_HOST=localhost
      23
      24
      25 [Thr 47057802424304] Thu Jul 14 16:28:59 2011
      26 [Thr 47057802424304] *** WARNING => INFO: Unknown property [instance.box.number=OSMDVEBMGS00atl-osm-01] [jstartxx_mt. 841]
      27 [Thr 47057802424304] *** WARNING => INFO: Unknown property [instance.en.host=atl-osm-01] [jstartxx_mt. 841]
      28 [Thr 47057802424304] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx_mt. 841]
      29 [Thr 47057802424304] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx_mt. 841]
      30
      31 **********************************************************************
      32 JStartupReadInstanceProperties: read instance properties [/usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties]
      33 -> ms host    : atl-osm-01
      34 -> ms port    : 3901
      35 -> OS libs    : /usr/sap/OSM/DVEBMGS00/j2ee/os_libs
      36 -> Admin URL  :
      37 -> run mode   : NORMAL
      38 -> run action : NONE
      39 -> enabled    : yes
      40 **********************************************************************
      41
      42
      43 **********************************************************************
      44 Used property files
      45 -> files [00] : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties
      46 **********************************************************************
      46 **********************************************************************
      47
      48 **********************************************************************
      49 Instance properties
      50 -> ms host    : atl-osm-01
      51 -> ms port    : 3901
      52 -> os libs    : /usr/sap/OSM/DVEBMGS00/j2ee/os_libs
      53 -> admin URL  :
      54 -> run mode   : NORMAL
      55 -> run action : NONE
      56 -> enabled    : yes
      57 **********************************************************************
      58
      59 **********************************************************************
      60 Bootstrap nodes
      61 -> [00] bootstrap            : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties
      62 -> [01] bootstrap_ID3888600  : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties
      63 -> [02] bootstrap_ID3888650  : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties
      64 **********************************************************************
      65
      66 **********************************************************************
      67 Worker nodes
      68 -> [00] ID3888600            : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties
      69 -> [01] ID3888650            : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties
      70 **********************************************************************
      71
      72 [Thr 47057802424304] JLaunchRequestQueueInit: create named pipe for ipc
      73 [Thr 47057802424304] JLaunchRequestQueueInit: create pipe listener thread
      74 [Thr 1115011392] WaitSyncSemThread: Thread 1115011392 started as semaphore monitor thread.
      75 [Thr 1104521536] JLaunchRequestFunc: Thread 1104521536 started as listener thread for np messages.
      76 [Thr 47057802424304] SigISetDefaultAction : default handling for signal 17
      77
      78 [Thr 47057802424304] Thu Jul 14 16:29:00 2011
      79 [Thr 47057802424304] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
      80 [Thr 47057802424304] CPIC (version=700.2006.09.13)
      81 [Thr 47057802424304] [Node: server0] java home is set by profile parameter
      82         Java Home: /opt/java/java
      83 [Thr 47057802424304] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/OSM/DVEBMGS00/exe/jvmx.jar
      84
      85 **********************************************************************
      86 JStartupIReadSection: read node properties [ID3888650]
      87 -> node name          : server0
      88 -> node type          : server
      89 -> node execute       : yes
      90 -> jlaunch parameters :
      91 -> java path          : /opt/java/java
      92 -> java parameters    : -verbose:gc -Xtrace -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.     engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.eng     ine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Xmn400m -XX:PermSize=2048m -XX:MaxPermSize=2048m -Dorg.omg.PortableInterceptor.ORBInitializerClass.co     m.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
      93 -> java vm version    : 4.1.009 17.0-b16
      94 -> java vm vendor     : SAP Java Server VM (SAP AG)
      95 -> java vm type       : server
      96 -> java vm cpu        : amd64
      97 -> heap size          : 2048M
      98 -> init heap size     : 2048M
      99 -> root path          : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/server0
    100 -> class path         : ./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
    101 -> OS libs path       : /usr/sap/OSM/DVEBMGS00/j2ee/os_libs
    102 -> main class         : com.sap.engine.boot.Start
    103 -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    104 -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    105 -> framework path     : /usr/sap/OSM/DVEBMGS00/exe/jstartup.jar:/usr/sap/OSM/DVEBMGS00/exe/jvmx.jar
    106 -> shutdown class     : com.sap.engine.boot.Start
    107 -> parameters         :
    108 -> debuggable         : no
    109 -> debug mode         : no
    110 -> debug port         : 50021
    111 -> shutdown timeout   : 120000
    112 **********************************************************************
    113
    114 [Thr 47057802424304] JLaunchISetDebugMode: set debug mode [no]
    115 [Thr 1101179200] JLaunchIStartFunc: Thread 1101179200 started as Java VM thread.
    116
    117 **********************************************************************
    118 JHVM_LoadJavaVM: VM Arguments of node [server0]
    119 -> stack   : 1048576 Bytes
    120 -> arg[  0]: exit
    121 -> arg[  1]: abort
    122 -> arg[  2]: vfprintf
    123 -> arg[  3]: -verbose:gc
    124 -> arg[  4]: -Xtrace
    125 -> arg[  5]: -Djava.security.policy=./java.policy
    126 -> arg[  6]: -Djava.security.egd=file:/dev/urandom
    127 -> arg[  7]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    128 -> arg[  8]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    129 -> arg[  9]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    130 -> arg[ 10]: -Djco.jarm=1
    131 -> arg[ 11]: -Xmn400m
    132 -> arg[ 12]: -XX:PermSize=2048m
    133 -> arg[ 13]: -XX:MaxPermSize=2048m
    134 -> arg[ 14]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    135 -> arg[ 15]: -Dsys.global.dir=/usr/sap/OSM/SYS/global
    136 -> arg[ 16]: -Dapplication.home=/usr/sap/OSM/DVEBMGS00/exe
    137 -> arg[ 17]: -Djava.class.path=/usr/sap/OSM/DVEBMGS00/exe/jstartup.jar:/usr/sap/OSM/DVEBMGS00/exe/jvmx.jar:./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin     /system/bytecode.jar:.
    138 -> arg[ 18]: -Djava.library.path=/opt/java/sapjvm_4/jre/lib/amd64/server:/opt/java/sapjvm_4/jre/lib/amd64:/opt/java/sapjvm_4/jre/../lib/amd64:/usr/sap/O     SM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/tmp/sapinst_exe.26924.1310559612:/usr/sap/OSM/SYS/exe/run:/sapdb/programs/lib:/u     sr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib:/usr/sap/OSM/DVEBMGS00/j2ee/os_libs:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/us     r/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/SYS/exe/run:/sapdb/programs/lib
    139 -> arg[ 19]: -Dmemory.manager=2048M
    140 -> arg[ 20]: -Xmx2048M
    141 -> arg[ 21]: -Xms2048M
    142 -> arg[ 22]: -DLoadBalanceRestricted=no
    143 -> arg[ 23]: -Djstartup.mode=JCONTROL
    144 -> arg[ 24]: -Djstartup.ownProcessId=5639
    145 -> arg[ 25]: -Djstartup.ownHardwareId=H0868704103
    146 -> arg[ 26]: -Djstartup.whoami=server
    147 -> arg[ 27]: -Djstartup.debuggable=no
    148 -> arg[ 28]: -DSAPINFO=OSM_00_server
    149 -> arg[ 29]: -DSAPSTART=1
    150 -> arg[ 30]: -DCONNECT_PORT=60140
    151 -> arg[ 31]: -DSAPSYSTEM=00
    152 -> arg[ 32]: -DSAPSYSTEMNAME=OSM
    153 -> arg[ 33]: -DSAPMYNAME=atl-osm-01_OSM_00
    154 -> arg[ 34]: -DSAPPROFILE=/usr/sap/OSM/SYS/profile/OSM_DVEBMGS00_atl-osm-01
    155 -> arg[ 35]: -DFRFC_FALLBACK=ON
    156 -> arg[ 36]: -DFRFC_FALLBACK_HOST=localhost
    157 -> arg[ 37]: -DSAPSTARTUP=1
    158 -> arg[ 38]: -DSAPSYSTEM=00
    159 -> arg[ 39]: -DSAPSYSTEMNAME=OSM
    160 -> arg[ 40]: -DSAPMYNAME=atl-osm-01_OSM_00
    161 -> arg[ 41]: -DSAPDBHOST=atl-osm-01
    162 -> arg[ 42]: -Dj2ee.dbhost=atl-osm-01
    163 **********************************************************************

  • How to open multiple Sessions in Solution Manager

    Good Day Gurus,
    I am currently working on Solman 7.1 Sp12.My question is :Is it possible to open multiple sessions in Solution Manager? Here is the scenario: The client is working on multiple incidents and instead of logging on to the system again to access the 2nd incident he would like to open another session within the current call he is working on.
    Is this functionality possible in Solman? I have seen the functionality working before  in CRM interaction center not sure if it applies in Solman.
    Your help is highly appreciated.
    Thanks
    Maria

    Hi Maria,
    Options to Call a Function in an SAP System, by entering transaction codes in the command field, the transaction in bold is the one your want for opening multiple sessions.
    You can use the F1 key on the command field to display the following possible entries:
    /N to cancel the current transaction
    /NXXXX to call transaction XXXX directly from another transaction. Without the prefix, you can only call XXXX from the SAP Easy Access screen.
    /O to display the overview of the SAP GUI sessions on your computer
    /OXXXX to call transaction XXXX in a new window directly from another transaction
    /NEND to end the log on session with a confirmation dialog box
    /NEX to end the log on session without a confirmation dialog box
    /I to delete the window you are currently using
    Regards,
    Ruth

  • Java-Error during Solution Manager Installation

    During the Installation at point "Prepare to install minimal configuration" I'm getting the following error message:
    An error occurred while processing option <i>SAP Solution Manager 7.1 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step :Assertion failed: in
    function NW_Call_Offline_CTC_ind_ind_ind_ind_SubComponentContainer_callOfflineCTC() {
        var nw = NWInstall.getSystem(context.get("sid"));
        var ctcDirFs = nw.getCI().getInstanceDir().concat("j2ee", "ctc");
        var ctcExeFile = installer.onWindows() ? "LaunchOfflinectc.bat" : "LaunchOfflinectc.sh";
        var ctcCall = ctcDirFs.concat(ctcExeFile);
        installer.writeTrace("CTC is in" + ctcCall);
        ASSERT(arguments.callee, ctcCall.isExisting(), "CTC executable cannot be found in " + ctcCall.toString());
        var pmgt = new ProcessMgt();
        var app = pmgt.createChildApplication(ctcCall, []);
        var userData = nw.getUsers().getAccountData(NWUsers.roles.SIDAdm);
        var user = (new AccountMgt()).getUser(userData.name);
        var env = pmgt.getProcessEnvironment();
        if (installer.onUnix()) {
            env.setUser(user);
        } else {
            if (installer.onOS400()) {
                env.setUser(user);
                env.setGroup(user.getPrimaryGroup());
                env.setKernelLibrary(nw.getOS4_Krnlib());
        env.setWorkingDirectory(ctcDirFs.getNode());
        var javaHome = nw.getJavaHome().toString();
        env.setEnvironmentVariable(new Property("JAVA_HOME", javaHome));
        installer.writeTrace("For the Offline CTC Call, JAVA_HOME is set to " + env.getEnvironmentVariable("JAVA_HOME"));
        app.setEnvironment(env);
        var retval = app.run([], true);
        ASSERT(arguments.callee, retval == 0, "CTC retval is not 0 but " + retval);
        installer.writeTrace("CTC has been called in Offline Mode.");
    CTC retval is not 0 but 1)
    As a JVM I'm using the version provided by SAP on DVD, JDK is ver6_26-rev_b21, JCE_policy is version 6.
    Can anyone help me here?

    WARNING 2011-12-07 13:09:36.864
    Execution of the command "C:\usr\sap\DSM\DVEBMGS00\j2ee\ctc\LaunchOfflinectc.bat" finished with return code 1. Output:
            1 file(s) copied.
    java.io.BufferedInputStream@4a4e79f1
    Dec 7, 2011 1:09:34 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Start Execution of Offline CTC TemplatInstaller
    Dec 7, 2011 1:09:34 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Looking for initial Properties in file '../../../config/usagetypes.properties'
    Dec 7, 2011 1:09:34 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Loading of initial Properties-File successful
    Dec 7, 2011 1:09:34 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Selected Usages:SolManager:SolManager Java
    PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
    Dec 7, 2011 1:09:36 PM   ...ProviderFactory.initalize(Context)_1! [Thread[main,5,main]] Info:
    Dec 7, 2011 1:09:36 PM   ...rovider(ConfigurationProviderFactory) [Thread[main,5,main]] Info: !BrokerRegistry.register!ConfigManagerProvider
    Dec 7, 2011 1:09:36 PM   ...DataModelRepository.registerExtension [Thread[main,5,main]] Path: entering 'registerExtension'
    Dec 7, 2011 1:09:36 PM   ...DataModelRepository.registerExtension [Thread[main,5,main]] Info: registering extensions for 'http://www.sap.com/ctc/configurationmanager'
    Dec 7, 2011 1:09:36 PM   ...DataModelRepository.registerExtension [Thread[main,5,main]] Path: entering 'registerExtension'
    Dec 7, 2011 1:09:36 PM   ...DataModelRepository.registerExtension [Thread[main,5,main]] Info: registering extensions for 'http://www.sap.com/ctc/configurationmanager'
    Dec 7, 2011 1:09:36 PM   ...onControllerImpl.startUpProcessEngine [Thread[main,5,main]] Path: entering 'startUpProcessEngine'
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: The class XMLPathUtil_1_5 is not supported in 7.0
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: java.lang.IllegalStateException:The class XMLPathUtil_1_5 is not supported in 7.0
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.util.XMLPathUtil_1_5:getStringValue25
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.util.XMLPathUtil:getStringValue161
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2Action:transformInternal390
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2Action:transform118
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2Action:transform89
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2JavaProcessFactory:lightLoadProcessFromXML191
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessRegistry:loadProcess402
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessRegistry:getVisibleProcessesInternal350
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessRegistry:getVisibleRootProcesses222
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessEngine:getVisibleRootProcesses489
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:executeWizard121
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:main585
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: sun.reflect.NativeMethodAccessorImpl:invoke0-2
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: sun.reflect.NativeMethodAccessorImpl:invoke39
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: sun.reflect.DelegatingMethodAccessorImpl:invoke25
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: java.lang.reflect.Method:invoke597
    Dec 7, 2011 1:09:36 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.engine.offline.OfflineToolStart:main81
    Program terminated abnormally

Maybe you are looking for

  • Adobe Drive 3 CMIS work with SharePoint 2013? (Getting errors)

    Hello guys. I'm trying to use Adobe Drive 3 with SharePoint 2013 to sync a folder by CMIS without success. I get a "Drive already mounted" message with an "Invalid location" error. Already tried using rest and soap url's, and on the SharePoint, the C

  • Finger print reader - Windows 8 Consumer Preview

    I installed the consumer preview of Windows 8 on my Lenovo B570. The device manager shows theSecure biometrics device normal. Its a EgisTec ES603. Also the Bioexcess software on the Lenovo Security Suite runs fine. But when I start the enroll process

  • How do I get an audiobook purchase put into the iBooks instead

    I purchased an audiobook on iTunes and I wanted it to be an I book. How can I get help in changing this?

  • IPhone 4 - it begins?!? Not really ...

    It took Verizon 5 years (!) to finally get the iPhone to their customers. When they rolled it out to their long-suffering customers, it was heralded as the greatest innovation ever. It's true, it is one of the best phones there is. But its been aroun

  • Accessories from Apple store

    Hi all. Just a quick question. Can you buy the Miniot iWood from an Apple store rather than buying it online? Many thanks