Solution Manager 7 EHP1 - Implimentation Help

Dear All,
I am new to Solution Manager.
I have install Solution Manager 7 EHP1 (ABAP+JAVA) on windows 2003 and applied later SP stack 24 available at Market place.
We have SAP ECC 6, ABAP stack (we have not install JAVA stack for DEV/QAS or PRD Servers).
On ECC 6 out landscap is DEV->QAS->PRD.
Now after installing Solution Manager 7 EHP1, I have done automatic configuration using SOLMAN_SETUP i.e. upto BASIC CONFIGURATION successfully.
Initially I want to use solution manager for
1. Support Patch Approval
2. SAP Note download
3.Service Desk
Now where and what I need to configure my DEV/QAS/PRD system to use above solution
Thanks in advance,
Nirav

Hi,
Did you add your ECC landscape DEV/QAS/PRD in solution manager smsy?if not that would be first step to proceed.
1: Support patch approval check these links,you need to configure these in Solman system
https://websmp206.sap-ag.de/~sapidb/011000358700000086852008E.sim
www.alphasirius.com/Configuring_Using_MaintenanceOptimizer.ppt
/people/issacnolis.ohasi/blog/2008/01/04/upgrade-sessions-whats-sap-solution-manager-maitenance-optimizer
2. SAP Note download
These setting can be done in individual system by configuring OSS connection to SAP
3:3.Service Desk
/people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
Regards
Uday

Similar Messages

Solution Manager 7 EHP1 - Chage Host name and IP Address

Dear All,
I have installed Solution Manager 7 EHP1 (ABAP+JAVA Stack) on Windows 2003 64bit and working fine.
I need to change HOST name and IP Address of the machine.
In SAP where I need to change or reconfig ?
Thanks in advance,
Nirav

Hello Nirav,
first of all: welcome to a big adventure!
There are some configurations you should face and prepare yourself before you change the hostname, or IP-Adress.
1. Be aware of the SMD-Agents. You should activate the Maintenace Mode in Diagnostics just before changing the hostname.
2. Do the changes in ABAP (profile parameters, transport configurations, RFC-connection settings, reorganization of table entries). The systemcopy guide is a good place for informations. Don't forget to recreate the trusted connections to and from the connected managed systems.
3. Do the changes in Java (use system copy guide for informations).
4. Every SMD-Agent in your system landscape must be reconfigured after you change the hostname and did the adjustments in ABAP and Java. Have look into the Diagnostics setup Guide for a detailed information about changing the conection parameters
5. If you are using a central DBACOCKPIT management in SolMan and Oracle, the TNSNAMES entry should be changed.
6. SAP likes to connect to SolMan, so the SAPROUTER entries schould be changed also.
7. Perhaps you are monitoring your system landscape with SAPCCMS Agents, then all agents in your landscape have to be changed in their configurations.
8. I have BI installed within SolMan and got an error page after changeing the hostname. Try this URL to make some corrections:
http://<hostname>:<Port>/webdynpro/dispatcher/sap.com/tcsmde2ewa/E2ewaConfig
Changing the hostname of SolMan isn't a small job and done in 60s. I suggest a detailed planning and to make a roadmap of all doings.
Have a lot of fun!
Sascha

Solution Manager 7 EHP1 green/demo install

I am trying to set up a standalone SAP BI server with the demo content so I can test a product that queries InfoCubes. Windows 2003/SQL Server 2008 platform.
I am trying to follow the docs, but they assume some prerequites that are not clearly defined. I have a central system running with a license installed, but I cannot apply SNOTEs because I get an error in connection to destination SAPOSS.
Obviously I am missing something fundamental but I can't find a simple guide on what to do. The documentation seems to run in circles telling me to do things that don't work because I don't have the right SNOTEs installed.
Is there an easy way to get a SAPOSS connection for a non-production system?
Is there a guide that walks you through all the prerequisites for a Solution Manager 7 EHP1 install?

> Is there an easy way to get a SAPOSS connection for a non-production system?
In order to download the SAP Note via SNOTE, the SAP OSS RFC connection should work. If your SAP Router is working fine, then add necessary entries in Tcode OSS1>technical Parameters . Add the router in the system data of the particular system in service market place.
> Is there a guide that walks you through all the prerequisites for a Solution Manager 7 EHP1 install?
Refer the installation guide in service.sap.com/instguides > SAP components > Solution Manager EHP1 .
Regards,
Nibu Antony

Getting this error when trying to install solution manager...Please help!!!

ERROR 2010-06-01 11:59:43.214 [synxccuren.cpp:78]
 CSyCurrentProcessEnvironmentImpl::setUser()
FSL-00001 System call failed. Error 1326 (Logon failure: unknown user name or bad password.
) in execution of system call 'LogonUser' with parameter (ntadmin, wdflbmd0360, *******, LOGON32_LOGON_INTERACTIVE,LOGON32_PROVIDER_DEFAULT,&hUserToken), line (1015) in file (synxccuren.cpp).
TRACE 2010-06-01 11:59:43.479 [iaxxejsbas.hpp:408]
 handleException<ESyException>()
Converting exception into JS Exception ESyException.
TRACE 2010-06-01 11:59:43.479
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException
ERROR 2010-06-01 11:59:43.479
 CJSlibModule::writeError_impl()
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
TRACE 2010-06-01 11:59:43.479 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2010-06-01 11:59:43.542 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_Users_Create|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
TRACE 2010-06-01 11:59:43.557 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP Solution Manager 7.0 EhP1 > Software Life-Cycle Options > Additional Preparation Options > Operating System Users and Groups( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/LM/USR. </body></html>
TRACE 2010-06-01 11:59:43.557 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2010-06-01 12:00:05.386 [sixxcstepexecute.cpp:1003]
An error occured and the user decided to stop.\n Current step "|NW_Users_Create|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0|setUserEnvironment".

Hi, I am facing something like only.
I have windows 2008 Server 64 Bit/Oracle 11g 64 bit and trying to install SAP BI 7.0.
Please have a look at the log below:
WARNING[E] 2013-06-26 20:10:20.152
FSL-06002 Error 1722 (The RPC server is unavailable.
) in execution of a 'OpenSCManager' function, line (130), with parameter (ServicesActive).
WARNING[E] 2013-06-26 20:10:20.152
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2013-06-26 20:10:20.152
FCO-00011 The step setDefaults with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|NW_getDBInfo|ind|ind|ind|ind|2|0|NW_getDBInfoGeneric|ind|ind|ind|ind|2|0|setDefaults was executed with status ERROR .

Problem in "Diagnostic configuration" in Solution Manager 7 ehp1

Hi All
I try to execute "Diagnostic configuration" step in my solution manager 7.0 ehp1.
I have executed all the basic configuration in my SM.
I executed transaction solman_setup -> select step "Automatic
Configuration" -> "Diagnostic configuration" and appear this error
message:
Service cannot be reached
What has happened?
URL
http://<hostname>:8000/webdynpro/dispatcher/sap.com/tcsmdnavigation/StandaloneApp call was terminated because the corresponding
service is not available.
Must I activate any service from transaction sicf? if yes, which service must I activate?
Thanks in advance for collaboration.
best regards
giovanni

Hi!
We are facing the same problem.
http://xxxxxxxxxxxxx::8000/webdynpro/dispatcher/sap.com/tcsmdnavigation/StandaloneApp?APP_ID=ADMIN_INTROSCOPE_AGENT
500 Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
Did you find any solution to the issue? The note 1276263 is not availible.
/Anton Renberg

Ehp1:Solution Manager:Stuck at ddic activation

Hello All,
While upgrading the Solution Manager to Ehp1, import stuck at phase DDIC_ACTIVATION, reason for error is TP_STEP_FAILURE, the return code is 0012 and the error message: OCS Package ******** , tp step A, return code 0012.
I can see in the log of the import queue that the job RDDMASGL was terminated and I found the entry "ABAP / 4 processor: EXSORT_NOT_ENOUGH_MEMORY" in the log of that job.
My system is a 32 bit Windows operation system with 3GB physical Ram.
I have the following doubt
1.) If i keep on re-runing again will the already activated program will be skip or will be re-activated.
2.)How can i resolve this error.
Regards
Anthony

Hi
If i keep on re-runing again will the already activated program will be skip or will be re-activated.
It will be skiped and will proceed with rest of the object
How can i resolve this error.
You need to check import logs for better analysis
Rerun the import and see how the things go
Regards
Uday

Solution Manager Create remote monitoring entry

Hello,
I need some help or clarification please. We just upgraded our Solution Manager to EHP1 spk25 and I'm trying to setup Solman to support central system monitoring. I'm on the last step to enter the moitored ABAP system in CEN through RZ21 Techincal >Configure Central System>Create remote monitoring entry.
I can enter my own System ID but can't enter the RFC destination ? These default to *_RZ20_Collect and *_RZ20_Analyze. I want to use the RFC's already in place through Charm since these are already setup and working correctly. Can someone tell me how to change this or why we have to use the defaults.
Thanks in advance
Stephanie

Please disregard.
Thanks

Wily Introscope Version for Solution Manager 7 SPS 17

Hi
We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
Looking in the SWDC there are downloads in SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
Thanks for any help.
Paul.

Hi Bhudev
Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
the first 2 (of 23) setups are failing :
SSO The value of profile parameter login/accept_sso2_ticket could not be checked
BI Cannot invoke CCMSBISETUP on host localhost
Warning :
User(BI) Role SAP_BI_E2E does not exist
Then it says :
To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
I cannot find this Diagnostics Setup Guide for SP17 ?
The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
Thanks,
Paul.

EHP4 solution manager xml file not supporting

Hi Support Team,
Here we are in middle of installing ehp4 installtion struck with an
error : "Error reading stack info . freturn code=-1,Reason = "the stack
configuration is not valid for the system HDC,inst no. 0020592069."
Here our HDC is ERP system where the EHP4 installation is
undergoing.Please find the screenshot attached.
SApehpiconsole log : (last 200 lines)
A trouble ticket and an archive with all relevant log files have been
generated.
Trouble ticket: "/oracle/EHPI/abap/log/SAPehpi_troubleticket.log"
Log archive: "/oracle/EHPI/abap/log/SAPehpi_troubleticket_logs.sar"
01) * Repeat phase SPAM_CHK_INI to continue at the point it stopped
02) - Restart the current module from the beginning
03) - Exit this program
Choose action: Repeat phase SPAM_CHK_INI to continue at the point it stopped
>> 2010/03/15 11:45:53 START OF PHASE PREP_CONFIGURATION/SPAM_CHK_INI
>> 2010/03/15 11:45:56 END OF PHASE PREP_CONFIGURATION/SPAM_CHK_INI
>> 2010/03/15 11:45:56 START OF PHASE PREP_CONFIGURATION/RUN_RSUPGSLI
Starting of Configure selective-language-import option in batch (job RSUPGSLI)
working ...
>> 2010/03/15 11:46:00 END OF PHASE PREP_CONFIGURATION/RUN_RSUPGSLI
Execution of PREPARE module "Configuration and language selection" ends at 20100315114600
Execution of PREPARE module "Extension module for start release >= 40B" begins at 20100315114600
>> 2010/03/15 11:46:00 START OF PHASE PREP_EXTENSION/UPLOAD_REQUEST
Uploading data ...
>> 2010/03/15 11:46:07 END OF PHASE PREP_EXTENSION/UPLOAD_REQUEST
>> 2010/03/15 11:46:07 START OF PHASE PREP_EXTENSION/SELSTACKXML
>>>> Stack configuration <<<<
Please specify a valid Enhancement Package stack configuration. The ADD-ON and
Support Package selection in the BIND_PATCH phase is taken from there. For
more information, see SAP Note 1022704 .
You need to include an Enhancement Package into the procedure. Please refer to
the manual for further information.
01) * Provide stack configuration file in input field below
Select configuration:: Provide stack configuration file in input field below
STACKFILE: /sapcd/SMSDXML_HDC_20100308092914.238.xml
>>>> Stack configuration <<<<
Please specify a valid Enhancement Package stack configuration. The ADD-ON and
Support Package selection in the BIND_PATCH phase is taken from there. For
more information, see SAP Note 1022704 .
You need to include an Enhancement Package into the procedure. Please refer to
the manual for further information.
01) * Provide stack configuration file in input field below
Select configuration:: Provide stack configuration file in input field below
STACKFILE: /sapcd/SMSDXML_HDC_20100308092914.238.xml
>>>> Stack configuration <<<<
Please specify a valid Enhancement Package stack configuration. The ADD-ON and
Support Package selection in the BIND_PATCH phase is taken from there. For
more information, see SAP Note 1022704 .
You need to include an Enhancement Package into the procedure. Please refer to
the manual for further information.
01) * Provide stack configuration file in input field below
Select configuration:: Provide stack configuration file in input field below
STACKFILE: /opt/SMSDXML_HDC_20100315065507.342.xml
Please guide us accordingly.
Regards
sap123

Hi Gurus
I am facing the same issue in configuration phase.
The error is "Error reading stack info.
 Return Code = -1, Reason = "No vendor specified"
Our Solution manager is on EHP1 now and we are facing this error after ehp1 upgrade, earlier we did one ehp4 upgrade test successfully with solution manager 7.0 before. But after upgrading solution manager to EHP1 we are facing this issue.
Can anyone help me on this....
Waiting for your response.
Thanks
Khalid

Difference between Solution Manager and Enterprise Edition

Hi all,
Please can someone help define the key differences between the standard Solution Manager and the Enterprise Edition?
I have done my research but can only find the usual marketing material and benefits from SAP. Ideally, the key functionality and main benefits of Enterprise Edition would be appreciated.
Regards,
-Rohan

Hi, enterprise edition is the Solution manager with EHP1 or SOLMAN in SPS 18, we did the upgrade already and some SAP specialists came to do some initial configurations.
More workcenters are the key functionality in this version altough this was released in earlier SPS's, to be sincere with you, SAP specialists that came for the service told us that this new version is oriented to workcenters and some improvements but he did not know all the new functionalities besides workceneters.
Workcenters are a nice way of working and keeping the whole landscape at sight as far as my short experience.

The URL in Solution Manager for SRM Standard Configuration

Hi Experts,
We all know that after SRM 5.0, all standard configuration guid are presented as URL in SAP Solution Manager like below:
http://help.sap.com/SCENARIOS_BUS2005/helpdata/EN/ac/136341acd3001de10000000a155106/frameset.htm
My question is: is there any other way to find these configuration url? If I don't have solution manager enviroment, how can I find these urls? Many thanks.

Hi Dinesh,
Thank you for your reply. I checked this site before(maybe one year ago). At that time, there was no configuration guide for 5.0. Now it's great...
My question is there any place contained those urls in solution manager. I can't find those urls in any configuration guide. SAP make such a configuration online help, why it doesn't open for those peopel who don't use solution manager. It confused me...
Anyway, thank you very much for your reply.

Solution manager 7.1 installation in ECC 6.0 landscape

Dear All,
I am planning to install solman 7.1 SP04 in my landscape where the managed systems are running on ECC 6.0. SP 07(PRD, DEV,...).
Is it fine to start installation with current landscape or i need to upgrade the ECC version.
Any documents available regarding the technical system patch level requirements for Solution manager 7.1 installation.
Please suggest.

Hi Jithu,
Pls refer below links,
Solution Manager installation 7.1
SAP Solution Manager 7.1 – SAP Help Portal Page
Dia Agent Connect To system in solman 7.1 sp10
Regards
K.N

Solution Manager vs Enterprise Solution Manager

Dear All,
We already have solution manager installed in our SAP System landscape.
But a visiting consultant give a new word to managers about enterprise solution manager with following benefits.
1-If we have enterprise solution manager then SAP AG can access our system and inform us about system health.
2-If we have enterprise solution manager then SAP AG will react on our ticket not on what we send but on the the actual actual condition of system.
3-We can only utilize our support services in a right way if we have enterprise solution manager.
1- Now first where I can check that the installed solution manager is standard or enterprise?
2- The benefit which is listed above is really available in enterprise solution manager?
3- Any tutorial or link defining how to install and configure enterprise solution manager.
Any response will be highly appreciated
regards,
Syed Saifuddin
SAP BASIS Administrator

Dear Paul
Following is the current Status of our Solution Manager
S / W Comp / Rels           / Level           / Highest support Package / Short Desc of Software Component
SAP_BASIS     700     0011     SAPKB70011     SAP Basis Component
SAP_ABA     700     0011     SAPKA70011     Cross-Application Component
PI_BASIS     2005_1_700     0011     SAPKIPYJ7B     PI_BASIS 2005_1_700
ST-PI     2005_1_700     0006     SAPKITLQI6     SAP Solution Tools Plug-In
SAP_BW     700     0011     SAPKW70011     SAP NetWeaver BI 7.0
SAP_AP     700     0007     SAPKNA7007     SAP Application Platform
BBPCRM     500     0007     SAPKU50007     BBPCRM
CPRXRPM     400     0007     SAPK-40007INCPRXRPM     SAP xRPM/cProjects/cFolders 4.00 (ABAP)
ST     400     0010     SAPKITL420     SAP Solution Manager Tool
ST-A/PI     01J_CRM500     0000          -     Application Servicetools for CRM 500 / 5
ST-ICO     150_700     0005     SAPK-15075INSTPL     SAP Solution Manager Implementation Cont
ST-SER     700_2006_1     0003     SAPKITLOG3     SAP Solution Manager Service Tools
Bachup Solution I will manage with Tivoli Storage Manager.
But give me a path to upgrade my Solution Manager to EHP1 or Solution Manager Enterprise Edition.
regards
Syed Saifuddin

Error during installation of SAP solution manager netweaver 7.0

Hi,
I encounter the error message below when try to install the solution manager. Anyone pls help?
INFO 2011-08-26 12:54:59.763
Output of D:\usr\sap\TST\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\install\lib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\install\sharedlib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\install" -c sysnr=00 -c ashost=SWIFSTEST -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -user_type system -message_file UserCheck.message is written to the logfile C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/UserCheck.log.
WARNING 2011-08-26 12:55:02.059
Execution of the command "D:\usr\sap\TST\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\install\lib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\install\sharedlib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\install" -c sysnr=00 -c ashost=SWIFSTEST -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -user_type system -message_file UserCheck.message" finished with return code -3. Output:
Usage : D:\usr\sap\TST\DVEBMGS00\exe\jlaunch.exe [-options] <arg0> <arg1> ... <argn>
Launch the specified java program
options : [-file=<property file>] (default=jlaunch.properties)
 [-nodename=<node name>] (default=jlaunch)
 [-app=<application name>] Standalone application
 -> <property file> = <application name>.properties
 -> <SAP profile> = <application name>.pfl
 [pf=<SAP profile>] (default=jlaunch.pfl)
 [-parent=<pid of the parent process>] (default=0)
 [-tracefile=<filename>] (default=dev_jlaunch)
Critical Error
Can't read program properties
-> Internal program error (rc = -1)
INFO 2011-08-26 12:55:02.059
Removing file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\dev_UserCheck.
WARNING[E] 2011-08-26 12:55:02.122
CJS-30197 . DIAGNOSIS: For more details see output of log file:
ERROR 2011-08-26 12:55:02.309
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .

Following is log display in sapinst.log file
INFO 2009-12-09 16:11:37.46
Execute step setNWOption of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|1|0.
INFO 2009-12-09 16:11:37.593
Execute step collect of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0.
WARNING 2009-12-09 16:11:38.984
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (81), with parameter (SYSTEM\CurrentControlSet\Services\etqcdrk).
WARNING 2009-12-09 16:11:39.0
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\etqcdrk' does not exist on the 'localhost' host.
ERROR 2009-12-09 16:11:39.31
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\etqcdrk' does not exist on the 'localhost' host.
ERROR 2009-12-09 16:11:39.46
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
INFO 2009-12-09 16:18:05.562
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect".

Solution Manager - v3.2 - Fundamental Question

Hi
I have a fundamental SAP / SM question which I cant seem to actually clarify....
Do ALL SAP servers in a SAP Infrastructure have to have a servername of 13 Characters?...
When revieing the OSS it mentioned HOSTNAME...and it seems to use this interchangably with Computer Name...
So, for example...
Can I have a Solutions Manager server with a Netbios name of "SOLUTIONSMANAGE" - 15 CHARACTERS and a SAP ECC Server with a server name also with 15 Characters......?
The OSS and all the documentation refers to SAP Prereq of 13 Characters for the Host...but what is the host defininition in this case?..What does the 13 Character limit apply to? How do companies with Naming conventions longer than 13 Characters implement the landscape?
Many Thanks!
J

Hi Oliver,
Check out these URL's
Solution manager
http://help.sap.com/saphelp_sm32/helpdata/en/index.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.logon.redirect
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how to integrate bex web applications into sap solution manager.pdf
http://www.sap.com/services/pdf/BWP_SB_SAP_Solution_Manager.pdf
http://www.sapinfo.net/index.php4?ACTION=noframe&url=http://www.sapinfo.net/public/en/print.php4/article/Article-220903dbfa95a95bd1/en
https://service.sap.com/solutionmanager
http://www.sapinsideronline.com/spijsp/article.jsp?article_id=41229&volume_id=5577
http://service.sap.com/roasmaps
Regards,
RK

Solution Manager 7 EHP1 - Implimentation Help

Similar Messages

Maybe you are looking for