Solution Manager as a  source for Portal UME

Is it possible to  to configure in EP 7, that UME source is Solman Abap clietn? We are using Solman as central CUA client too. Can one ABAP system can be user source for several ABAP?
Thank You
Vladimit

Hi Vladimir
                               It is possible to use Sol Man as your User Data Source.
Also one ABAP system can act as a source for several other abap based systems.
Check this out:
http://help.sap.com/saphelp_nw2004s/helpdata/en/07/622441cd87a12be10000000a1550b0/frameset.htm
Cheers.

Similar Messages

  • CUA as data source for portal UME

    Hi all
    We want to use the CUA system as the data source for our EP6's UME.
    Obviously our end users do not login to the CUA system and therefore have no password to this system. It doesn't seem rational to provide them a password to this system, but then again which password will they use?
    I'm guessing that this is the case for most of the SAP customers.
    Does this mean that we can't use the CUA as the UME data source?
    If any of you use the CUA as the UME, we'd be very glad to hear your solution to this situation (we can't use one of the child systems as the UME).
    Thanks,
    Yeti

    Hi Yeti,
    My remarks below will not answer your question but it will help you with some decision on your UME data source.
    As far as I know, most Portal use LDAP as their main UME datasource. This is largely due to the fact that LDAP contains ALL the users that are "employee" of the company. As for CUA, it does not contain ALL your users which could pose a problem for you when you want to execute certain Portal functions (or management approval flows) which require users who does not exist in your CUA (but exist in LDAP).
    3 presentations which I think its good to have a look and share with....
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d5f57332-0a01-0010-12ab-dd472e87b8e6
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c477de90-0201-0010-35ab-ddac4448ba9f
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706065c4-3564-2a10-2382-a52fcbd7eefb
    But there are also setup that uses CUA as their UME. I have linked some of the past threads who use CUA as their UME. I hope they can shine some light to your question. You can do a search here in the forum with "CUA UME portal" and you will also find posts that can help answer your question.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706d054d-da24-2b10-f18a-fc82faf6468e
    Solution Manager as a  source for Portal UME
    Multiple SAP Systems as UME
    EP
    Something to think about if you consider SSO with CUA as UME.
    how to sso between portal and abap
    Something more interesting to read about:
    LDAP connection from ABAP to Portal
    The above are base on my experience and the Portal setup which I have done for the company. But maybe there are better suggestions from other Portal guys,Experts,Gurus out here who will contribute to answer your question. 
    Hope that helps.
    Ray

  • Apache Directory Server as data source for Portal UME?

    Hi,
    Has anyone tried using Apache Directory Server as a Data Source for Portal UME? We would like to try that out. If anyone has tried before I would like to get the data source configuration file. ALso would like to know more in detail about the positives and negatives.
    Thanks for your help.
    Regards,
    Vishnupriya

    try to configure as stated in the following document.
    http://help.sap.com/saphelp_nw04/helpdata/en/18/5cea2296190e4cb7faf9468ad793ea/content.htm
    I have seen several discussions on sdn on the same, also make a keyward search on sdn.
    Also check this for pros and cons for having Apache ...
    Problem while configuring the Apache Web Server as the Intermediary Server
    Edited by: SJ on Aug 3, 2008 10:11 AM

  • Does Solution Manager support Service Report for non-abap?

    Does Solution Manager support Service Report for non-abap?
    We can schedule and view reports for ABAP but for all the non-ABAP such as J2EE stack (PORTAL) we can not pull out a report.
    If the answer is yes please let me know where I can get the documentation of how to setup SLA for PORTAL or non-ABAP.
    I found a document on EWA non-abap but non for SLA.

    Hi
    actually i am in task of setting up ewa for portal.
    i had already done with abap components (ewa and sla)
    i stronly believe one of the pre-requiste to get sla is EWA.
    so i think if u can setup ewa for portal then you can get sla too.
    Regards,
    Vijay.

  • Solution Manager : Support Desk Automation in Portal : GP or ABAPworkflow ?

    Hi ,
    We want to autoamte the Support Desk.
    Currently One Person is needed to handle support desk.
    - when a request mail comes to support , he(the person who handles support desk) has to create a support desk message, and set the status
    -For each reply mail also , he has to update the support desk messge.
    So we want to automize the support desk through portal.
    -For creating a message, a webdynpro iView will be created.
    _ For each user when he logs into the portal, he can view the messages pending with him, and he can act on it.
    - For each such action , RFC's will be called to update the solution manager database.
    But we are confused about..which workflow should be used? ABAP workflow or GP workflow? Which will perform better?
    Can anybody help me to reach a decision?
    thanks
    Smitha

    How about the BSP page?  Transaction 'NOTIF_CREATE_BSP'.

  • What can Solution Manager 7.0 provide for PI 7.1?

    I work with PI 7.1 EHP 1 and have been asked to determine if time/resource should be invested to setup Solution Manager 7.0 EHP 1 to provide monitoring/management of PI. I attended SAP TechEd 2011, and there was a lot of discussion that SM 7.1 would be a significant part of monitoring for PI 7.3. However, since I'm not on those platforms, can you help me understand what SM 7.0 can provide me as a PI Administrator/Support over what I use now (Runtime Workbench & SXMB_MONI)?
    The Solution Manager resource on the BASIS team mentioned that SM takes a lot of configuration and I'd have to learn about Business Process Management to make it do anything useful. What I saw at TechEd showed a nice start page that showed data volume, errors, and nice graph. Perhaps that is only for SM 7.1, but it seemed like a nice data view capability.

    Hello Tadd,
    Wily Introscope will provide you with nice (also real-time if you want) metrics for your PI system (dashboards). You can check for some details here:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0b96675-87cf-2c10-b489-dee0ac03f782
    Solution Manager requires additional steps in order to be able to configure this monitoring scenario. Once your solution manager is installed and running you have to perform initial configuration -> basic configuration -> managed system configuration
    In the last step you'll actually configure diagnostics and willy for your PI system.
    If the number of managed systems that you have to connect is small this "3 step" configuration can be done in a couple of weeks.
    Cheers,
    Diego.

  • Solution Manager to Monitor SAP NetWeaver Portal

    Hi ,
    I have setup Solution Manager 4.0 SP11 and I have a production EP.
    I want to monitor the EP using Solution Manager.  The monitoring would check if the portal is down and if it is down, the Solution Manager would send a email to the Portal Administrator.
    In order to achieve the above monitoring setup, do I need to install Solution Manager Diagnostics?
    I do hope to hear from you soon.
    Thanks.
    Regards,
    Mike Lee

    Hi Mike,
    Yes. You need to setup diagnostics.
    All documents related diagnostics are available at:
    http://service.sap.com/solutionmanager
    ->SAP Solution Manager in Detail ->End-to-End Root Cause Analysis->Media Library 
    Also look these:
    http://service.sap.com/diagnostics
    https://websmp109.sap-ag.de/operationsnw70
    Supportability->Supportability with SAP Solution Manager 4.0
    ->Root Cause Analysis Installation and Upgrade Guide SP15    
    Please read my reply of this thread:
    https://forums.sdn.sap.com/click.jspa?searchID=25523268&messageID=7426769
    Let me know if need more details.
    Regards,
    Sanjai

  • Solution Manager 4.0, waiting for response

    Hi,
    I successfully installled SAP Solution Manager 4.0 with SAPDB and Windows 2003.
    My problem: SAP System is running (looks all fine in sapmmc), but if I connted to the system with SAP GUI I get the message "waiting for response..." . This message is still there after one hour. So the logon isn't successful, any help?
    Thanks.

    Hi Andreas,
    from the DB perspective, please take a look into the SAP DB knldiag file (found in the Rundirectory of the DB). You can run 'xinstinfo <DB-SID>' from the commandline to find out the path of your Rundirectory.
    For example, maybe your SAP DB instance's log is full.
    Additionally, I'd take a look into the workprocess trace files (on the R/3 - application- side) to see if there are any errors there.
    Regards,
    Roland

  • Connect Solution Manager to which client for SMD

    Hi all,
    do I have to connect the solution manager to the productive client of the sat. system?
    We have systems with more than one productive client. Can we connect the SDM to more than one client? How can we do this?
    Thank you
    Timm Funke

    Hi,
    thank you for this quick response!
    So it is possible to configure the landscap with client 000.
    Then, when all sat. systems are working fine within SMD, I can configure the producitve clients in smsy (the rfc destinations to the producitve clients). then I can access these clients from SMD.
    Is this right?
    Kinde regards
    Timm

  • Solution Manager on 32-Bit for ECC-6

    Hi Gurus,
    We need to bring our 32-Bit ECC-6 system on EhP4 as soon as possible.
    From installtion documents I found that its two step installation. First install EhP3 and then EhP4 using SAINT.
    To install EhP we need use Solution Manager. Currently we dont have Solution Manager installed. Our first step would be installing Solution Manager. There are two options available:
    1. SAP Solution Manager 7.0 including SAP Enhancement Package 1.
    2. SAP Solution Manager 7.0.
    As everywhere its written we can not install solution manager on 32-bit but some some threads say we can do.
    Confirm that Solution Manager 7 cannot be installed on a 32-bit windows sys
    Assuming that we can still install Solution manage on 32 bit, first we need to install EhP3, which solution manager version should we use 1 or 2?
    Thanks in advance
    Regards
    Shreeshail Ganiger
    Edited by: ssganiger on Nov 5, 2009 6:48 AM

    Hi Shreeshail,
    Please use opton 1. This way you can choose to install either EHP3 or EHP4 (as your case maybe).
    Also, you wouldn't need to upgrade solman to ehp1, as ehp1 comes with a lot of corrections which otherwise you will have to manually implement on a Solution Manager 7.0 system.
    Cheers
    Rishi

  • Solution Manager as an aid for ASAP

    Hi Folks,
    I am new to solution manager, can anyone let me know how these are helpful, is there any material which I can refer.
    Your help would be highly apprecited.
    Regards,
    Ravi

    HI Ravi,
    PL EXPLORE service tons of material is there...
    Please have a look at:
    Self Training Matrials:
    http://service.sap.com/rkt-solman, then click on your Solution Manager release, then "Solution Consultant"
    Online Documentation:
    http://help.sap.com/saphelp_sm40/.../frameset.htm

  • Multiple LDAP Sources for Portal

    Per the HELP docs and other forum suggestions, I uploaded a new XML file and called it multildap_datasource.xml
    After uploading, it does NOT appear in the drop-down list of files to pick? Am I missing something here?

    Hi,
    Check if you get any error message.
    also check in the configuration adapter to see if the file uploaded.

  • Custom user attribute from ABAP to Portal UME

    Hi All,
    We have choose the ABAP as the data source for portal UME. We have a custom user attribute in the abap. Now i want to bring that custom user attribute from abap to custom user attribute in the UME.
    Any help will be rewarded.
    Thanks
    Sarang.

    Any resolution to this issue?

  • EPSolman: Portal to Solution Manager

    I am trying to integrate the Request Support" iView for Solution manager.
    I have given the iview parameters as iven by note  658665
    R/3 Installation Number of the Solution Manager  
    Portal DBMS short
    Portal DBMS release                                             Target R/3 Solution Manager version                   
    the connection for MMC_SOLOMAN connector also works fine.
    When i try to submit a query, it gives me the below error
    Errors sending data from the portal to the SAP Solution Manager
    Exception caught at onSendButtonClicked: null
    can anyone help
    Regards
    Jayesh

    Dear All
    Please let me know if any one has treid integrating EP with Solution manager. (Request/ Iview )
    Regards
    Jayesh

  • Setup and Configuration for a Solution Manager instance

    I am setting up a  Solution Manager instance for a client in Australia.
    Currently there is no reference client that I am aware of in Australia for Solution Manager.  So this is extremely important to get it right.  Also I am an independent contractor, so I am unable to call on any in-house experts from a consulting firm for help.
    So I am looking for answers from some experts who have done this before.
    Had some training on Solution Manager back in 2002.
    Our client wants to setup the solution manager instance to monitor 9 SAP instances
    - 3 R/3, DEV, Q/A, PROD
    - 3 BI, DEV, Q/A, PROD
    - 3 Enterprise Portal, DEV, Q/A, PROD
    Solution Manager is running in a separate instance for all those listed above.
    In addition to the above the client would also like to user the service desk function of Solution Manager for in-house support of SAP, and push to service desk request onto their support partner and/or SAP directly.
    Question:
    1) Is it better to use the Solution Manager client 001 or create a separate client for the customer?
    2) How would you as the expert configure the service desk component to push service desk requests to the support partner (a 3rd party Service Desk Tool or another Solution Manager instance), and allow the customer to choose to send the request direct to SAP?
    3) The client would also like to use the Solution Manager Instance as the CUA environment, is this advisable?
    Kind Regards
    David Cooper

    Hello David,
    Please find th answers below:
    1. You should use  a separate client for solution manager rather than using a standard one
    2. You should configure your solution manager as the service desk for all type of support requests.Solution manager can send your requests to SAP and vice-vera.Why do you a third part tool and waste money of the client.Solution manager can do all for you very effectively
    3.sure you should configure solution manager as CUA environment,there are no issues with that
    Let me know of any questions
    Rohit

Maybe you are looking for