Solution Manager Change Management: Transport Request Administration

Hi.
We want to use the CHARM functionality of Solution Manager to improve our transport operations. We have several customers and expend´s a lot of time making tranports to different systems.
I don want to activate CHARM completely. Which activities do i must perform, and which activities do i must leave ?
Regards
Alvaro

Hi Avinash
This is the Business Scenario: Our company is using SAP Solution Manager to perform monitoring and administration activities for over than 30 customers.
Dayly we espend over 85% of the basis team time making transport for all of the customers. We decide to set some internal politics to bundle transports, stablishing several releases of them, at specific hours of the day. So we want to use SOLMAN`S change logistics instead of CHARM Scenario to control and improve this activitiy, releasing time to perform other activities.
Regards
Alvaro

Similar Messages

  • Changeing the Transport request Attributes?

    Hi Guys,
                 Can anybody tell me how to Change the Transport request Text , means while creating a Request u will enter the Description for Each request.Can anybody tell me how to change that description?
                   Very Urgent.
    Thanks,
    Gopi.

    HI,
       You cannot change the text of a request if you are not the owner of that request..first change the owner of the request to your id and change the text.
    Thanks
    mahesh

  • Changing the Transport Request of an Object(Report)

    Hi,
    By mistake I have saved one of my Custom Transaction Code( of a custom Report) under wrong Ttransport Request Number.
    Could you please let me know the procedure to change the Transport Request number of any object like Report, TCode etc.
    Regards,
    Nitin

    Hello,
    Delete that perticular object from the request.
    And save that object again , so , system will ask you for the request again.
    Regards,
    Naimesh

  • Solution Manager Change Management Master Guide

    Hi
    We are looking into implementing Solution Manager 7.0 and have the
    following questions:
    - Can we implement change managment in Solution Manager with only one
    satellite system (i.e. Development) as the other systems are not ready
    yet (i.e. Test, QA etc.)?
    - Could you let us know where we can find the master or technical guide
    to setup change management in Solution Manager 7.0.

    Hi,
    it is possible to implement ChaRM even not all satellite systems are available yet.
    I am not sure how much functionality you will get using virtual systems but you may configure and test ChaRM using 3 different clients in your DEV system (need to adjust TMS config accordingly).
    Some useful information regarding ChaRM configuration can be found [here|/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario]
    Since ChaRM relies on Service Desk you should also have a look at appropriate Blogs.
    Also you should follow the IMG documentation/steps in SPRO.
    Regards

  • Solution manager -Change Management

    Hi gurus,
    I have just completed the SOLMAN service desk configuration and need to explain to client on the above (Change management)  compnent of SOLMAN
    Can anyone elobrate what is this software component for and any reading material related to this. It will very helpfull if you can provide the guides to configure and the user guide
    Your help highly appreciated

    For Service Desk:
    http://service.sap.com/solutionmanager -> Solution Manager in Detail -> Service Desk
    For Change Request Management:
    http://service.sap.com/solutionmanager -> Solution Manager in Detail -> Change Request Management
    For configuration you may follow Reference IMG documentation
    Solution Manager -> Configuration -> Scenario Specific -> Change Management
    Webblogs can be found at: SAP Solution Manager
    Additional info can be found at http://rkt-solman
    /cheers

  • To change the Transport Request Number Range.

    <b>Hi Experts,</b>
    My customer needs a typical solution.
    He wants SAP to create the Future Transport Requests starting from 10000. ( Ten thousand)
    now the sequential order is 321
    that is <SID><K9>00321. From now on the new transport request should start from 10000
    i.e.
    <SID><K9>100000
    <SID><K9>100001
    <SID><K9>100002
    etc.
    Is it possible. ?
    Thanks for your help.
    Best Regards,
    Raghunahth L

    Hi
    Check the report RSWBO301 and check its documentation..
    Press "I" button in the selection screen to get the documentation..
    I believe this might solve your problem...
    Program documentation
    Short text                                                                               
    Number Assignment for Requests: Find Free Interval                                                                               
    Description                                                                               
    This report program searches for a free interval for numbering requests.
        If the search is successful, you can save the interval. The request    
        numbers are then taken from this interval.                                                                               
    Requirement                                                                               
    For customers the number range interval includes the follwing areas:                                                                               
    o   900000-999999 (just numerals)                                                                               
    o   9A0000-9ZZZZZ for ASCII character set or                           
            9AAAAA-9Z9999 for EBSDIC character set.                                                                               
    You only need to execute this program if you have come to the end of the
         number range interval, but there are still large gaps in the range that
         you want to use up.                                                                               
    Example                                                               
             Why you might get into this situation:                            
             The customer has the R/3 System C11. The last number assigned is  
             C11K900115. The customer now imports transport request C11K9ZZZZA 
             from an external R/3 System C11 into the customer system C11. The 
             next request created in this system will have the number C11K9ZZZZB
                                                                                    Procedure                                                                               
    Proceed as follows:                                                                               
    1.  Execute this program in transaction SE38.                                                                               
    2.  Enter the interval limit, for example 5000. You can change this   
             limit at any time.                                                                               
    3.  Choose Execute.                                                   
             If you entered an interval limit of 5000, the report searches for a
             free interval with a size of 5000.                                                                               
    4.  If the search was successful, you can save this interval. If not,
              repeat the search with a smaller interval.                      
    Thanks,
    Naren
    Thanks,
    Naren

  • How to add config changes in Transport Request

    Hi Experts,
    We did some config changes in Logistics - General=>Material Master=>Configuring the Material Master=>Define structure of Data screen for screen sequence / Assign Secondary sequence / Maintain Order of Main and Additional Screens.
    But while saving this config of  Assign Secondary sequence / Maintain Order of Main and Additional Screens its not asking for Transport Request.
    Even i checked in the menu of EDIT-Tranport entries, but the menu's are in disable mode.
    Can anyone guide me how to add this two fields config changes in to TR?
    Thanks and regards,
    Anandhan

    Hi,
    This is really strage.
    However you can try the following.
    upon entering the config node, use the first menu option in which option "transport" would be there.
    Upon clicking it, the same table opens in display mode.
    Select the entries that you have created and use the option "include in transport"
    When asked for, provide teh transport number.
    Alternatively you can create a transport and them use SE10 to include entries from tables that you can select.
    ou may need teh help of an experinced ABAPer or Basis to do it if you are not confortable doing it yourself.
    However if the config effects multiple tables, then this is not a viable option as you need to know all the impacted tables.
    hope this helps.

  • How to find changes through transport request

    Hi all,
    I want to know whcih table and has been changed for that perticular transport request.
    Regards,
    Ramprasad

    Hi,
    Go to se09/se01. Open the request and check the objects under that TR.
    If u want to know the exact changes then u can do a remote comparision between development and test system for each object underthat TR.
    Thanks,
    vinod.

  • Change the transport  request number

    HI All,
    One of my program in porduction we done few modifications to that program one month back that is still in QAS,again we done few more modifications to the same program so now I have 2 request numbers due to few problem here my client don't want to move to PRD the TR number that I created one month back he is asking me to create new TR number,but my problem is after that TR I already created one more TR that is also in QAS,if I create again a TR is it will have modifications that I done in two earlier requests,any one please suggest me.
    Thanks and regds,
    Sree.

    Hi Sree,
    If i am not wrong, you are having below doubt :
    1. You have done some modification which u transported to quality. Transport No A.
    2. You have done some new changes which u record into another transport request. Transport No B.
    If its a workbench request, then no need to worry, you can transport request no B only to PROD.
    But if its a customize request, the u have to include Transport A contents to Transport B.
    Thanks
    Piyush

  • Regarding Client change for transport request

    In 46C system, How to change client for transport request?
    Before Upgrade, we have Trans Request-DEVK900002 for client XXX, and this client does not exists anymore. now How to delete this trans request or release it.
    one of the way i think is to change client for transport request and release it. Please share your suggestions.
    regards
    Jaichan

    Hi shlesa,
    Thanks for your reply.
    I tried now..it does not worked out.
    i created request at 000 using DDIC and then logged with 001 client using DDIC.
    then i executed SCC1, gave Source Client 000 and Request number and executed.
    i checked in SE09, was still the Request appeared with 000 client.
    Any other alternatives.
    Jaichan

  • How to change the transport request of a NOTE without undoing the note

    When we applied the OSS NOTE we put it in a transport request. How can we move the objects into another transport request? Since this is a REPAIR type, SAP does not allow manual copy of the entries. I don't want to include the objects of this transport into another one, Is there any other way?

    1. Create a new transport request in SE01
    2. Select the request and click on "Include Objects: button.
    3. Select "Freely Selected Objects: option from the pop-up windoe
    4. Select "Selected Objects" option
    Now you see three rows without any PGMID selected.
    5. Check the checkbox corresponds to the row and enter the value OBJ & OBJNAME (Textbox without any label). (This valued can be retrieved from your previous request).
    6. Delete the same object from your previous request.
    7. Click on "execute" button.
    8. Click on "Save In request" button.

  • Changing object transport request

    Hi,
    I'm doing customizing creating a sales organization and defining output type.
    By accident I put these two in the same transport request.
    I want to move the defining output type object to another transport request as I want to transport that one first but I don't want to delete the creating sales organization.
    Any way to do it?
    I tried using object directory entry but can't.
    Thanks.
    Dwi

    Hi Dwi,
    No need to delete anything.
    If u imported it into any box we can't do anything.
    But there is one method to overwrite it by assigning it as different TR's
    So if u exported now, dont touch the TR(Transport Request)
    The different tasks what this TR contains assign it as different TR's and release them in which order you want.
    Try this and reward us if it helpful to u.
    Regards
    Adarsh

  • To change the Transport request nUmber

    Hi
    i have created some programs with diffrent request numbers
    and task numbers
    now i need to change the descriptions , requst numbers for the same programs
    how to change that
    Thanks in advance

    Hi Sri,
    if the request is not released just double click on the request and click on change button (pencil icon) click on Properties tab and you can change the description there, just save it and you are good to go.
    Hope it helps
    Gothrought the following links,
    Changing description of a Transport object
    Regards,
    Harish

  • File management - changing "managed" to "referenced"

    I've imported several thousand images as managed files and would like to change them to referenced to conserve disk space.
    What is the easiest way to do this? And can it be done without disrupting the order of my folder/project hierarchy?
    Thanks,
    M

    1. Select the images.
    2. File>Relocate Masters...
    3. Tell it where to move the masters to, including a sub-folder format if you want.
    4. There is no step 4.
    You'll see little alias badges added to the images in the Viewer pane, apart from that you won't see any functional difference within Aperture, assuming the HD with the referenced files on is mounted.
    Ian

  • Factory calendor changes through transport request

    Hi,
    Is it the right way to move the factory calendor changes to golden client to quality to production clients through transaport request. Please guide me.
    Regards,
    Mastan.

    Hello
    Please take a look on the following note that describes the pre-requisites to transport a factory calendar:
    538344 - Transporting calendar dates
    Also consider the following points:
    The calendar can only be transported as a whole.
    The calendar transports work according to the motto: all or nothing.
    I.e. no keys are specified in the transport and the whole content of the tables is transported.
    It is not possible to select single calendars for transport.
    For all above reasons, when transporting the calendar, all existing entries in the target system will be overwritten.
    BR
    Caetano

Maybe you are looking for