Solution manager Data Migration Solaris to AIX

Hi Gurus,
We are planning for migration our solution manager from Solaris to AIX .
I want to know the best method to do the migration.
We are currenlty on Solman 7.0 EHP1 SP23.
Please let me know if anyone has done this before or can suggest domething on this.
Dev

Hi,
You need to do heterogeneous system copy for this using sapinst.
Thanks
Sunny

Similar Messages

Solution Manager 4.0 Installation Error AIX 5.3 / Oracle 10.2.0.1

Hi All,
I am facing an error in the installation step of Solution Manager 4.0 on AIX 5.3 / Oracle 10.2.0.1
Hostname : INXXXXSAPIDES
The ABAP instance is not coming up and the Installation failed.I tried to bring up the instance manually.But was not successful.
Workprocess traces :
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x7000001732fa070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x7000001732fa470
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2176 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5720kb, dir_size: 5664kb.
A Attached to PXA (address 0x7000001e0000000, size 150000K)
A abap/pxa = shared unprotect gen_local
A PXA INITIALIZATION FINISHED
A -PXA--
A
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x0x113a1f5c0
=> Stack address = 0xfffffffffffded0
=> Stack low = 0xfffffffffffb5e0
=> Stack high = 0xffffffffffff810
=> Stack Trace:
 pthread_kill() at 0x900000000490650
 praise() at 0x900000000490070
 raise() at 0x900000000059624
 abort() at 0x900000000084a90
TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T0/M0 [thxxhead.c 10721]

DEV_DISP 
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Sat Jul 28 22:41:18 2007
ERROR => W0 (pid 442462) died [dpxxdisp.c 14319]
ERROR => W2 (pid 635048) died [dpxxdisp.c 14319]
ERROR => W3 (pid 598164) died [dpxxdisp.c 14319]
ERROR => W4 (pid 770084) died [dpxxdisp.c 14319]
ERROR => W5 (pid 815142) died [dpxxdisp.c 14319]
ERROR => W6 (pid 761862) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W7 (pid 671804) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbd --> 0xb9
ERROR => W8 (pid 630958) died [dpxxdisp.c 14319]
ERROR => W9 (pid 622786) died [dpxxdisp.c 14319]
ERROR => W10 (pid 549070) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb9 --> 0xb1
ERROR => W11 (pid 544802) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb1 --> 0xa1
ERROR => W12 (pid 508062) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xa1 --> 0x81
Sat Jul 28 22:41:55 2007
ERROR => W1 (pid 802934) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
stderr1
Command: dw.sapSM4_DVEBMGS10
 pf=/usr/sap/SM4/SYS/profile/SM4_DVEBMGS10_INSISCSAPIDES
ICM up and operational (pid: 675892) ***
timezone value meaningless. BSD libraries linked?
work process W1 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W2 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W12 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
.timezone value meaningless. BSD libraries linked?
work process W4 died => ThSigHandler: signal
work process W8 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
Can someone please help me in this.
Thanks
Siva
Message was edited by:
 siva sakthi

I found the solution..
There was a a problem in the timezone setting for the server.After changing it and rebooting it worked perfectely.

Solution Manager data upload/synchronize from SMSY to Marketplace

Hi Experts,
One of our SAP System data has got deleted from SAP Marketplace system data maintenance section. The data is available in SMSY transaction of our solution manager system.
I would like to know if there is any way that we can populate/synchronize the data available in SMSY to Marketplace System Data.
Please advice on this.
Rg,
Sandeep.

Hi Anil,
This issue is resolved now and i was able to populate data from SMSY to System data in marketplace.
using SMSY - select system - system data in support portal - synchronize.
It uploaded data from SMSY to OSS and all details are visible now.
Rg,
Sandeep.

Solution Manager Data Extraction for BW

Hi,
We have a Solution Manager in place for SAP Systems. Our requirement is to extract data from Solution Manager into BW and provide BW Reports for Solution Manager Reporting & analysis.
What are the standard DataSources/Extractors available in solution manager for this?
What are the Business Contents (Infosources) available in BW?
Any help will be rewarded.
Regards
Prasad

Hi Prasad,
have you already found the related IMG tree? It guides you through the setup.
Transaction SPRO -> SAP Reference IMG -> SAP Solution Manager -> Scenario-Specific Settings -> Operations -> BI Reporting
transaction: RSA5 (Installation of DataSource)
- 0SM_SMG_ROOT                   Oberster Knoten Solution Manage
-- 0SM_SMG                        Solution Manager
--- 0SM_DSWPBI_DB390
--- 0SM_DSWPBI_DB400                  DB400 Data
--- 0SM_DSWPBI_DBADA                  Adabas Data
--- 0SM_DSWPBI_DBDB2                  DB2 Data
--- 0SM_DSWPBI_DBINF                  Informix Data
--- 0SM_DSWPBI_DBMSS                  SQL Server Data
--- 0SM_DSWPBI_DBORA                  Oracle Data
--- 0SM_DSWPBI_MODUL                  Module Data
--- 0SM_DSWPBI_PERF                   Performance Data
--- 0SM_DSWPBI_SERVER                 Server Data
--- 0SM_DSWPBI_SYSDATA                System Details Data
--- 0SM_DSWPBI_SYSTEM                 System Data
Best regards,
Ruediger Stoecker

Plug Solution Manager data into CR reports

Hi *,
my first post, so apologies if I'm in the wrong Forum or doing some other typical newbie things..
My management asked me to find out whether it is possible to connect the data from solution manager within my crystal reports!?
Are there any built functions, adapterts now that Businnes Objects is SAP?
Main focus would be to gather data from the 'Early Watch Reports' and put this into our Crystal Reports.
thx for any hints.
David

Hi David,
To create a report based on the SAP R/3 and BW will have to install the BusinessObjects integration kit for SAP. I am afraid if Early watches can be use with Crystal Repots.
Regards,
Aditya Joshi

Org Management Data Migration

Hello everyone !!
   I am currently working of org data migration from legacy to SAP and using LSMW Recording for Infotype 1000, 1001, 1002 .....
    when I came across info type 1001 were I was creating Relations using recording i can easily do whole recording with out any problem, and then I saved this recording and provided source and structure fields.
   Problem I encountered at P1001-SCLAS in second screen of tcode PP02. where I have to enter " Type of related object ". its a list of selections where I have to pick one from a list, the value i pick here is description of what I upload from a text file. for eg: if I read the value of SCLAS : k or s, or c or o. then similarly I have to pick a description.
k = cost center, s = positions, c = jobs and o = org unit. depending of subtype I select a list of description is populated.
In P1001-SCLAS which is in the second screen of PP02. here comes the problem, this field is of only 2 character but on the screen I have to select a description which is obviously greater than 2 character.
   When I read file and convert data the converted data has only values picked from the file but not description.
Here is what I needed. How do I convert a 2 char field to a 12 or 15 character field in target table and how to select a single description from a list of descriptions.
Note: DTT is ruled out here. No chance of using DTT. But still you can add comments on DTT.
Thanks for any help.

I am using tcode PP02 and then entering values for
Plan Version,
Object Type,
Object ID,
Infotype,
Subtype,
Planning status, and
Validity.
Once I hit create icon "Create Relationships" screen comes up here I have to enter Type of related object, which I can select from a drop down list. This field is P1001-SCLAS. Which is of 2 characters, but when I see a drop down list its a description which is more than 2 characters. How can I populate values in this field using BDC or Recording. the value I am reading from a file for this field is k or s ... but same field has a drop down list with descriptions but not k or s...., its kind of hard for me to imagin how this field can be populated. When I run a session in SM35 I am getting an error in BDC session as " No batch input data for screen MP100100 2000 ".When I look Converted data in LSMW its k or s ... but not description this is obvious.
Thanks.

Error in installation of Sap Solution Manager - AIX / Oracle

Hello,
We are installing SAP Solution Manager in Operating System is AIX 5.3 and Database System is Oracle 10.2
After the Oracle Installation, in the phase of Abap Import (16 of 44), we are
receiving the follow error message:
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
ERROR 2007-04-12 15:27:41
CJS-30022 Program 'Migration Monitor' exits with error code 2. For
details see log file(s) import_monitor.java.log, import_monitor.log.

The installation export DVD was copied to local machine (the directory
list is attached in zip file). We get this DVD from
service.sap.com/swdc.
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20061222 (ifix 113727: SR7 + 112603) (JIT enabled: jitc))
IMPORT_MONITOR.JAVA shows this message:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20061222 (JIT enabled)
J9VM - 20061220_10521_BHdSMr
JIT - 20061026_1805_r8
GC - 200612_20)
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
And the directory is OK
/oracle/install/51032524
ls -l
total 160
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.ASC
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.EBC
-rwxrwxrwx 1 root system 9093 Apr 12 09:54 COPY_TM.HTM
-rwxrwxrwx 1 root system 5787 Apr 12 09:54 COPY_TM.TXT
-rwxrwxrwx 1 root system 8559 Apr 12 09:54 CRCFILE.DAT
drwxrwxrwx 4 root system 256 Apr 12 10:03 EXP1
drwxrwxrwx 4 root system 256 Apr 12 10:11 EXP2
drwxrwxrwx 4 root system 256 Apr 12 10:14 EXP3
drwxrwxrwx 4 root system 256 Apr 12 10:16 EXP4
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.ASC
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.EBC
-rwxrwxrwx 1 root system 20 Apr 12 09:54 LABELIDX.ASC
-rwxrwxrwx 1 root system 22361 Apr 12 09:54 SHAFILE.DAT
-rwxrwxrwx 1 root system 22 Apr 12 09:54 VERSION.ASC
Please, anybody have any idea?
Thanks for help,
Carlos Nogueira

Hi Carlos, can you resolve this ? because i have the same problem, but with sql and win 2003.
java version "1.4.2_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_15-b02)
Java HotSpot(TM) Client VM (build 1.4.2_15-b02, mixed mode)
Required system resources are missing or not available:
Import directory sapinst\saptrans\D51032007\EXP1' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP2' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP3' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP4' does not exist.
thanks in avance.

How to Check UPL data collection at Solution Manager

Hello,
I had activated UPL data collection as per the document How to Guide –SAP Custom Code Management Usage and Procedure Logging.
I can check UPL data in my managed system by Report “/SDF/SHOW_UPL"
But I am not able to get the same data in Solution Manager by this same repot (/SDF/SHOW_UPL).
When I run this report in solman it show me only Solution manager data.
How I can read Manage System data in Solman? And what are the check point (for both Solman and Manage system) I need to check for ensuring my UPL date collection is working fine.

Set up CCLM and the custom code setup and you will be able to view UPL data that way,

Import of Solution Manager reference data to ARIS

Hi all,
I would like to import SAP Solution Manager data to ARIS.
Is it possible to perform that simply importing a SolMan file including reference data to ARIS or do we need to create an interface between SolMan and ARIS?
We would like to do this in the most simple way as possible since it is for demo purposes only.
So if you have any idea please let me know.
Thanks,
//Anders

Anders,
I have done similar demos in the past. based on my experience I am giving a quick step by step procedure for doing this.
Create Project in SAP Solution Manager and define system landscape by choosing the
SAP components based on the selected scenarios.
(ii) Analyze and Select the content from the Solution Manager BPR based on the
finalized Scenarios/Processes.
(iii) Establish a Project Database on the ARIS Server and merge the As-Is Scenario/Process
from the existing ARIS DB into this.
(iv) Synchronize Solution Manager Project with ARIS and establish the link between
ARIS Project DB and SolMan.
(v) Perform analysis of the As-Is Process in conjunction with selected scenarios from Solution
Manager reference content and define the structure and scope.
(vi) Align the As-Is Process with the Reference Framework from Solution Manager and
add/delete steps as required.
(vii) The Business process architecture is adapted to the SAP Reference Content aligned to the
structural layers of Solution Manager (Scenario, Process and Process Step).
(viii) Synchronize the Business flows created in ARIS with Solution Manager and update
structure on both ends.
Hope this helps you. Let me know if you need anyother information.
Rgds
Manish

Data Migration for Territory Management Data in CRM 7.0

We are currently upgrading from CRM 5.0 to CRM 7.0. I am trying to understand how the Territory Management Data Migration process is going to work. A requirement for us is to have all history from CRM 5.0 Territory Management available in CRM 7.0.
When executing program CRM_TERRMAN_DATA_MIGRATION, it appears that is is only creating a rule for the active atributes in CRMM_TERRATTRIB. How can rules be created for inactive attributes? Is it possible with the Data Migration Program?

You can consider a writing a custom program to migrate Territory attributes. You can use the FMs CRM_TERRMAN_SINGLE_READ_BUFFER, BAPI_TERRITORY_ATTR_CHANGE for that purpose.
Refer to my article below which may be useful-
http://www.divulgesap.com/blog.php?p=OTU=
Regards,
Ravikiran

Solution Manager 4.0 and SLD automatic population

Our Solution Manager 4.0 installation was failing repeatedly while importing the CIM objects into the SLD. So here is what we did:
1.During installation we pointed the Solution Manager data supplier to the production SLD. The production SLD is on 640 wheras this is on 700.
2.After installation we created the Solution Manager (Admin) SLD by creating all necessary roles, groups, users and started importing the CIM and the delta.
3.We setup the data supplier of the production SLD to populate the Solution Manager (Admin) SLD. It looks like it is not getting populated and we got the following error in the production SLD:
#73 01/09/2007 12:39:15.173 [Thread-124] WARNING com.sap.lcr.sagent.BuilderDirector: Warning: SLD target system http://host:50100/sld sld/active not available (incoming data will be ignored).
Thrown:
com.sap.lcr.api.cimclient.CIMClientException: Received response is not a CIM Operation Response! Check "http://host:50100/sld" is the correct URL for the SLD CIM Object Manager and that user "user" has access to the SLD via http.
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:434)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:581)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:195)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:147)
at com.sap.lcr.api.cimclient.CIMOMClient.getCIMClass(CIMOMClient.java:538)
at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1185)
at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1196)
at com.sap.lcr.api.cimclient.CIMClient.ping(CIMClient.java:290)
at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:621)
at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:545)
at com.sap.lcr.sagent.BuilderDirector.run(BuilderDirector.java:459)
But this is the URL we use to go to the Solution Manager SLD!!! and the user is also correct.
1.I want to setup a way where the Solution Manager (Admin) SLD is populated from the production SLD every so often thru SMSY_SETUP -> Expert Settings -> Write back into SLD.
2.I want to use this Solution Manager (SLD) as the Admin SLD for NWA.
3.How do I know that the Object Manager of is up/down in the Solution Manager(SLD) and maybe restart it, while I can see that the SLD server is up.
3.I Manually setup some of the technical systems in the Solution Manager SLD by logging onto it http://host:port/sld, but I cannot see those in System Landscape in Solution Manager.
Can somebody please tell me how I can proceed from here.
A quick response would be appreciated with points.

Hi, we have server AIX and ORACLE for SAP BI7, we have SP12 in ABAP area and SP9 in J2EE area.
So i need same SPs in ABAP and JAVA for multiples notes recomending that, and fix the GIS Maps in Web.
So BASIS sayme SM is not compatible by Hardware, i not understand.
We only need Solution for download SP13 and packages the Java Stack.
Some guide for check Harware Requeriments the SM ?
Exist some new update to ASAP for BI, looking the new versions ?

Data Migration from 4.6C to ECC 6.0

Hi all,
Can you suggest me solution for data migration from 4.6C to ECC6.O which technique to be used!!
if you have the documents regarding the above post it which will be useful!!!
Thanks,
Yogeshwaran K S

Hi Yogesh
OS migrations are more or less painless beside the fact, that most "Unix" operating systems are using a different endianess (aside from Solaris on X86_64). For RFC and other SAP proprietary communication this is done in the kernel but if you use own software to read BINARY data (not talking about textfiles) you need to take care of that in your software.
Hope ths helps
Please reward points
Sunil

SSO from Solution Manager to Wily Enterprise Manager issue

Hi,
We are facing problem in SSO from Solution Manager to Wily Enterprise Manager. We have done the configuration as per the Wily Enterprise Guide- "Introscope Version 8 Installation Guide For SAP" Page 38.
Our Solution Manager system is running on AIX platform and Wily Enterprise Manager is on Windows 2008.
This is what we are trying
SOLMAN Production Client --> SOLMAN_WORKCENTER --> INTROSCOPE WORKSTATION --> this opens a new browser page and from there we click on Start Introscope -->
Result --> SSO doesn't work, still we get login window.
Introscope Enterprise Manager logs says -->
9/12/11 10:47:17 PM BST [WARN] [Manager] Single sign on failed: No SAP single sign on ticket was found in the request header.
Note: Another Solution Manager system in our landscape (on windows 2008 platform) is connected to same Wily Enterprise Manager (windows 2008) and from this solution manager SSO to Wily Enterprise Manager is working.
Please help me with your expertise to solve this problem.
Best Regards
Davinder

Hello Singh,
Could you check if you have maintained these parameters in instacne profile ?
From SCN post -> http://scn.sap.com/thread/969538
Hi Hector,
To configure SSO as per initial setup guide, please check your profile parameters in your Solution Manager as below:
You have set up SSO, see also:
SAP Note 817529: Checking the SSO Configuration
Installation Guide and Security Guide for SAP Solution Manager
Create the following profile parameters in the instance profile:
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = fully qualified server name
This parameter must be attributed to the fully qualified server name (for example wdfd002568.wdf.sap). The name must contain at least two periods. See also SAP Note 434918.
Hope this helps,
Regards,
-Rohan
BR,
kamil

ABAP Import Error on Solution Manager Installation

Dear Guru's,
I'm installing solution manager 7.0 SR4 on AIX 5.3 with DB2 9.5, in the ABAP Import phase its throwing error message.
Error Message
WARNING 2010-04-27 11:29:41.914
Execution of the command "/usr/sap/SM1/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SM1/SYS/exe/run/R3load: START OF LOG: 20100427112940
WARNING[E] 2010-04-27 11:29:41.917
CJS-30023 Process call '/usr/sap/SM1/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SM1' as 'sapsm1' failed
(DB) ERROR: DbSlErrorMsg rc = 29
ERROR 2010-04-27 11:29:42.429
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR .
Kindly suggest me a solution for the above issue.
regards,
Guna

Hi,
As per your request, trans.log has been pasted below,
detecting the error: "connect". Protocol specific error code(s): "79", "*",
4 ETW000                                                                              35 0.064772
4 ETW000 [dev trc     ,00000] &+      "*". SQLSTATE=08001
4 ETW000                                                                              35 0.064807
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              36 0.064843
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              36 0.064879
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              35 0.064914
4 ETW000 [dev trc     ,00000] *** ERROR in DB6Connect[dbdb6.c, 1634] (END)          29 0.064943
4 ETW000 [dbdb6.c     ,00000] *** ERROR => DbSlConnect to 'SM1' as 'sapsm1' failed
4 ETW000                                                                            4444 0.069387
2EETW169 no connect possible: "DBMS = DB6                              --- DB2DBDFT = 'SM1'"
regards,
Guna

XML Interface in Solution Manager

Hi All,
In Solution Documentation presentation, there are slides that give details on importing documentation from external sources like(Excel) into Solution Manager documentation. Has anyone done this task and what is the interface used to export to standard SAP XML format from EXCEL and import files from XML format into soution documentation (SOLAR01)?
Details from slides are:
Using a XML interface business process documentation of external sources like MS Excel, Lotus Notes can be efficiently imported in SAP Solution Manager
Data transfer process flow:
Detailed steps
1. Develop a data extractor program to convert MS Excel to XML document
- Create a program to extract content from data source. The extractor has to use the xml schema definitions provided by SAP
- Extract the data from the data source into XML format
Benefit
Quick and efficient method to transfer external documentation into SAP Solution Manager
Detailed steps
Use SAP Solution Manager interface to import XML documentation
- Import the data into SAP Solution Manager within SAP Solution Manager
- Verify the imported documentation
Thanks and regards,
Nischal

Hello,
You can find links to many interesting documents and also some troubleshooting guides at https://wiki.sdn.sap.com/wiki/display/SM/Maintenance+Optimizer
Best regards,
Miguel Ariñ

Solution manager Data Migration Solaris to AIX

Similar Messages

Maybe you are looking for