Solution Manager Diagnostic setup SM 4.0 NW2004s questions

Hi Experts,
Am new to solution manager and was trying today to setup SMD for the portals (EP 7.0 NW2004s). Here we have SM 4.0 (NW2004s) or SM 7.0 (as called now) already installed and used for different purpose. So i hope the SMD is already installed for this version. I am able to login to smd/admin page.
1. I did the monitoring system config. Now when I go to monitored system tab I get this message
Landscape DB is empty. Please make sure Component Analyzer is ready on monitored systems, and use "Refresh" button on this page
We haven't installed the component analyzer on the monitored systems. Where can we find it on SMP?
2. If any body could provide me with the document for the same or give me just the steps in sequential order for SMD setup or the latest setup guides as am bit confused reading guides I have. The guides available are for NW2004 i.e. SMD setup guide and SMD advanced setup (Version 1.0 June 2006) from SMP. I have also followed the blogs but there is nothing much on SMD setup.

I would definitely go to the highest support package level if you plan to install support packages. Many fixes have been incorporated.
RCA (Root Cause Analysis) is a function provided by SMD. To set that up check
http://service.sap.com/diagnostics
--> Root Cause Analysis Installation and Upgrade Guide
Markus

Similar Messages

Solution Manager Diagnostic Setup Guide

Can anyone tell me where can I find the Solution Manager Diagnostic Setup Guide? I have the Advance Guide but not the standard guide.
I CANNOT find it in:
http://service.sap.com/instguides -> SAP
Components -> SAP Solution Manager -> Release 4.0 -> Diagnostics Setup Guide as of SPxx
http://service.sap.com/diagnostics
http://service.sap.com/nw2004s
Where is it hiding??? Or has it got a new name???
Points given if helpful answer is provided.
Thanks.
Regards,
Annie

Hi Annie,
I found a SDM Guide. The name of file is "Root_Cause_Analysis_Installation_Upgrde_Guide_SP13".
Unfortunately I do not know where it is stored.
I suggest you either to find for that or I can send you per Mail.
P.S. do not forget to award the points
regards
Thom

Searchiung for Setup Guide Solution Manager Diagnostic SP20

Hello,
I'm searching for a Setup Guide for Solution Manager Diagnostic SP20. Because we have installed a new Solution Manager 7 with SP20 and want to configure it.
In th SDN I found only the latest Version of the Setup Guide with SP15.
Can any one help me?
Thanks for your help
Franz-Josef

Hello,
under https://websmp209.sap-ag.de/nw04operation i also foung the Setup Guide for SP17.
But SP20 is still missing
Regards
Franz-Josef

Solution manager diagnostic tools

I was sure that I read somewhere that there was a diadnostic tool for the web dispatcher and portal,
I am really looking to get diagnostics on load balancing.
Could this be the tool "Solution manager diagnostic tools"
If yes, where can I get it?
Thanks
Jeremy Baker

Please refer note 826671. URL, https://service.sap.com/diagnostics gives you all the information about it.
SMD is used for monitoring the NetWeaver landscape (Java). It is based on WAS 6.40 (think from SP11, 12 it can support). I guess the next version of SM (now 3.2) will be probably housing SMD by default (next version of SM should be based on WAS 6.40).

E2E Solution manager Diagnostic

Hi,
I want the model question for the E2E 100(End to End Solution Manager Diagnostic). I need to apper in the certification. Can anybody provide me the model question for this certification or need a guidence for the preparation.............
very thankful to you.
regards,
shanti

Hello,
Are you using versin 8.0? If not use version 8.0.
Regards,
Paul

Error in Database monitoring in Solution Manager Diagnostic

Hello All,
I'm facing issue in configuring Database monitoring for Java system (EP/PI) from Solution manager .
It could be configured from sol man diagnostic>Diagnostic System>Managed system>Database monitoring, iei'm unable to have java system in DBACOCKPIT system .
I can have connection as successful, but along with it i'm getting error as "Error in CL_DB6_SYS with return code ADBC error", for this issue, i got note # 1263152, i did applied this note, but still no success.
I'm having Sol man system, which is on EHP1 SP2 and rest other java systems are at PI 7.1 & EP 7.0, database is Oracle 10.2.0.4.
Please let me know, if anyone did face such kind of issue & solution for the same...
Thanks
Anand.

I could solve this problem....latest kernel on managing & managed system is thumb rule for this.

Relationship between Solution Manager Diagnostic and CCMS

We are just now looking at Solution Manager Diagnostics and central monitoring in Solution Manager. One thing we are not clear on, and haven't seen anything definitive on, is the relationship between these and CCMS.
Any insight or link to documentation would be greatly appreciated.
Thanks!
Jeff Henke

Solution Manager Diagnostics is a diagnostic tool, not a real-time monitoring and alerting tool. CCMS is for real-time monitoring and alerting, and SMD does in fact get data from your CCMS agents, as well as from saposcol and Wily Introscope.
Hope that helps,
David.

Solution manager security setup

Hi All,
We are trying to restrict the access at Business scenario level in Blueprint within Solution Manager. Any pointers to achieving this will be highly appreciated.
Example - We have created a Project Id - ABC within which we want to segregate access by business scenarios such as FICO, SD etc.
Thanks for your invaluable inputs
Regards
Vijaya

Hi,
I would suggest for every business scenario a Solman project to be created. Please go through the below SAP Help content, which gives detailed description:
http://help.sap.com/saphelp_sm40/helpdata/EN/44/060727cdaa2ab6e10000000a1553f7/content.htm
You should then be able to restrict access at project level for usergroups.
Regards,
Nagendran
Edited by: Nagendran Govindarajan on Nov 28, 2008 11:58 AM

Unable to run Solution Manager Diagnostic in txn DSWP

Hi,
In txn DSWP, I click Goto-Solution Manager Diagnostics, the browser is launched with this address:
http:<hostname>:8000/smd
However, it says "Page cannot be displayed"
I have checked that the its services in txn SCIF are activated. I can see HTTP Port 8000 service running in SMICM.
http:<hostname>:50000/smd is running fine.
Does someone has a clue where could have gone wrong?
Points will be rewarded for any helpful answer.
Thanks.
Annie

Hi Rajesh,
Unfortunately this is not working. However, I begin to suspect it is due to the firewall.
I refer to the 'Root Cause Analysis Installation and Upgrade Guide" section 5.8 Required TCP ports.
I don't understand when it says "It is recommended to place the SAP Solution Manager within the same subnet or DMZ of your managed landscape."? Does that mean Solution Manager is to be in the same subnet as DMZ?
I have the tendency to believe this might be the cause.
Are you able to tell me if you did anything to the DMZ? Or simply just activate the port 8000 in firewall?
Thanks!
Regards,
Annie

Solution Manager diagnostic

Dear Team ,
We have configured Diagnostics on EP Dev Server successfully, When we try to check the data from
E2E Workload analysis, It is raising following error .
500 - Internal Server Error
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.sal.core.DispatcherException:
The requested deployable object 'sap.com/tcsmdnavigation'
and application 'null' are not deployed on the server.
Please check the used URL for typos.
Exception id: [001A64094BA6006E00000011000013FC000448150C308C43]
we have gone thru SAP note 1113811 , but couldnot identify the exact solution
Please suggest!!!
Gopal

Hi Gopal,
Have you found solution to this issue?
I am facing the same problem. Our Solman system is at SP13, LMservice P4.
Points will be rewarded for the help!!

Questions on "FAQ - SAP Solution Manager for VARs"

Hi,
I just got through the FAQ - SAP Solution Manager for VARs, but have some further questions:
For me it is not quite clear which connections are necessary for which VAR scenrio.. currently we have setup the service desk in our solman. Customer's aren't linked to the solman yet - we have saprouter-saprouter connections. Connecting them via SAP support backbone is an interesting option, especially for incident management. To get this working we should follow note 1124718 right?
But what about the other scenarios like maintenance optimizer and ewa monitoring? I guess for that we definitly need to build up RFC connections to each relevant customer system (~300+x)?! I think it will be hard to handle so many connections - just consider if a customer is cancalling the maintenance contract, everything needs to be removed again... best would be to have a central communication point...
For MOPZ we need up-to-date system information. So everyone is talking about SLD. Do you also recommend this option? There we need again a connection (direct to SolMan SLD or via external SLD on customer side).
According to the FAQ there is a workaround for ewa monitoring for customers with security doubts.. is this also working for non-ABAP components? We need SMD and WI for generating ewas for JAVA systems...
With regards to Enterprise Support contract: ewa only need to be monitored for productive systems? Can a customer be charged if they want to have ewas monitored for other sytems too? How long do we need to keep the ewas (1 month, 3 months, half year) before they are deleted? Are there any specific requirements?
All the work to get these scenarios working.. is this covered within the Enterprise Support contract? Can the customer be charged for work thats done by the VAR in their system (e.g. RFC connections, SDCCN, SLD,...)?
Sorry for this long text.. hope you have some helpful ideas!
Regards,
Richard

Hello Richard,
(1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information.
(2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
(3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
(4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
Kind regards
Heinrich

Monitoring PI Integration Server in Solution Manager

I am trying to set up monitoring the PI Integration Server in Solution Manager. The issue I am having is assigning the auto-reaction methond in solution manager. I am unable to assign as it is not modifiable in Solution Manager. I am able to change in PI system, but do not want to do it there. Has anyone done this and can you guide me to steps/documentation ?

Hi Alexey,
everything you need to know is in the "SAP Solution Manager operations"
document under
http://service.sap.com/solutionmanager
-> Media library
-> Documentation
if you have problems with the communication between the SLD and the SolMan
check document SAP Solution Manager Landscape Setup Guide
under http://service.sap.com/diagnostics
-> Media Library
and note 1148028 - Setup SLD in the scope of Solution Manager 7.0
If you are curious about the SLD architecture in general you can also have a look at
http://service.sap.com/sld
regards, Javier

Enterprise Portal monitoring with Solution Manager

Dear guru's,
I have just installed a SAP Solution Manager 4.0
I would like to monitor a Enterprise Portal SP15.
Does someone have a walkthrough for this because very little information can be found on the sap help pages.
I'm interested in user/memory/iview statistics etc.
Hopefully someone of you has experience in this.
I would appreciate it alot.
Thank you
Kind Regards,
Bud

Hi Bud,
I've found useful docs here:
https://websmp109.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001908512005E
and.
http://service.sap.com/nw04operation
-->Supportability --Solution Manager Diagnostics - Setup Guide SP Stack 16
bet regards
Wolfgang

Solution Manager Change Management Master Guide

Hi
We are looking into implementing Solution Manager 7.0 and have the
following questions:
- Can we implement change managment in Solution Manager with only one
satellite system (i.e. Development) as the other systems are not ready
yet (i.e. Test, QA etc.)?
- Could you let us know where we can find the master or technical guide
to setup change management in Solution Manager 7.0.

Hi,
it is possible to implement ChaRM even not all satellite systems are available yet.
I am not sure how much functionality you will get using virtual systems but you may configure and test ChaRM using 3 different clients in your DEV system (need to adjust TMS config accordingly).
Some useful information regarding ChaRM configuration can be found [here|/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario]
Since ChaRM relies on Service Desk you should also have a look at appropriate Blogs.
Also you should follow the IMG documentation/steps in SPRO.
Regards

EWA for Business Objects (XI 3.1) within SAP Solution Manager

Hello!
We use Business Objects (XI 3.1) and would like to get weekly a EWA report within our SAP Solution Manager.
Our SAP Solution Manger has only ABAP stack and it has the SPS version 25.
We also do not use Wily Introscope/Diagnostics and E2E tools within SAP Solution Manager.
Question
Is it possible to set up EWA for Business Objects with our requirements (SOLMAN with ABAP stack and without E2E/Diagnostics tools)?

Hello,
The short answer is no. You can verify this in SAP Note 1507629 - Preparing a BOE system for Service Sessions in Sol. Manager.
"...1.) Managed System Setup
Perform the Managed System Setup for SAP BusinessObjects Enterprise as
described in the "End-to-End Root Cause Analysis System Landscape Setup
Guide". This guide can be found in the SAP Service Market Place:
-> http://service.sap.com/diagnostics
-> Navigate to the "Media Library"
-> Open the document "SAP Solution Manager Landscape Setup Guide"
Please ensure that you perform all steps mentioned in the guide which
are relevant for your product and version. Please read also SAP note
1357901, which is also referred to in the above mentioned setup guide."
So this is a requirement. There are also pdf documetns attached to this note that describe how to setup the EWA in Solution Manager. EGI_SBOP_EWA_part1.pdf and EGI_SBOP_EWA_part2.pdf.
The fact you have no Java stack and have not installed Diagnostics, just means it has not been done. It can be done and then you can do a managed system setup, and the balance of tasks required to prepare the system and Solution manager to generate EWA reports for the BOE system. Its just more work, not a show stopper.
Regards,
Paul

Solution Manager Diagnostic setup SM 4.0 NW2004s questions

Similar Messages

Maybe you are looking for