Solution Manager EHP1 and BW cubes

Hi,
In solution manager , we have used the productive client as the BW client also. But we would like to know how the cubes are loaded.
I dont see any source systems in RSA1. Also all cubes look like Real time cubes.
So is there a concept of process chains in solution manager ?
Can someone provide more insight into it.
Thanks,
Tanuj

Hi Tanuj,
It depends on which function area you are using. Incident Management reports, Test Workbench, Root Cause Analysis, Business Process Monitoring, and so on. But most of the case, data are loaded into BW Real-time Cube by using BAPI, which called from scheduled Solution Manager jobs.
For example, in case of RCA reports, the job named "EFWK Resource Manager" triggers BW data extraction.
Regards,
Kazuhisa

Similar Messages

System Monitoring with Solution Manager Ehp1

Hi,
I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
<SID>_RZ20_COLLECT
<SID>_RZ20_ANALYZE
I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
<SID>_RZ20_COLLECT_123539Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
Please, Could you help me?
Thanks and regards,
Tomas.

Tomas,
I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system). I downloaded the lates ccmsagent file from the market place based my target system configurations.
Herewith attaching the logs while I'm trying to check the profile parameter.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
==   Checking profile:     /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
***WARNING: Unexpected parameter: dbs/io_buf_size =100000
***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
***WARNING: Unexpected parameter: rsau/selector1/class =35
***WARNING: Unexpected parameter: rsau/selector1/severity =2
***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
***ERROR: Size of shared memory pool 40 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 40
               with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 40
          with parameter: ipc/shm_psize_40 =1472000000
Shared memory disposition overview
================================================================
Shared memory pools
Key:   10 Pool
            Size configured.....:   642000000 ( 612.3 MB)
            Size min. estimated.:   637597428 ( 608.1 MB)
            Advised Size........:   640000000 ( 610.4 MB)
Key:   40 Pool for database buffers
            Size configured.....: 1048000000 ( 999.4 MB)
            Size min. estimated.: 1468229308 (1400.2 MB)
            Advised Size........: 1472000000 (1403.8 MB)
Shared memories inside of pool 10
Key:        1 Size:        2500 (   0.0 MB) System administration
Key:        4 Size:      523648 (   0.5 MB) statistic area
Key:        7 Size:       14838 (   0.0 MB) Update task administration
Key:        8 Size:    67108964 ( 64.0 MB) Paging buffer
Key:        9 Size:   134217828 ( 128.0 MB) Roll buffer
Key:       11 Size:      500000 (   0.5 MB) Factory calender buffer
Key:       12 Size:     6000000 (   5.7 MB) TemSe Char-Code convert Buf.
Key:       13 Size:   200500000 ( 191.2 MB) Alert Area
Key:       16 Size:       22400 (   0.0 MB) Semaphore activity monitoring
Key:       17 Size:     2672386 (   2.5 MB) Roll administration
Key:       30 Size:       37888 (   0.0 MB) Taskhandler runtime admin.
Key:       31 Size:     4806000 (   4.6 MB) Dispatcher request queue
Key:       33 Size:    39936000 ( 38.1 MB) Table buffer, part.buffering
Key:       34 Size:    20480000 ( 19.5 MB) Enqueue table
Key:       51 Size:     3200000 (   3.1 MB) Extended memory admin.
Key:       52 Size:       40000 (   0.0 MB) Message Server buffer
Key:       54 Size:    20488192 ( 19.5 MB) Export/Import buffer
Key:       55 Size:        8192 (   0.0 MB) Spool local printer+joblist
Key:       57 Size:     1048576 (   1.0 MB) Profilparameter in shared mem
Key:       58 Size:        4096 (   0.0 MB) Enqueue ID for reset
Key:       62 Size:    85983232 ( 82.0 MB) Memory pipes
Shared memories inside of pool 40
Key:        2 Size:    31168040 ( 29.7 MB) Disp. administration tables
Key:        3 Size:   114048000 ( 108.8 MB) Disp. communication areas
Key:        6 Size: 1064960000 (1015.6 MB) ABAP program buffer
Key:       14 Size:    28600000 ( 27.3 MB) Presentation buffer
Key:       19 Size:    90000000 ( 85.8 MB) Table-buffer
Key:       42 Size:    13920992 ( 13.3 MB) DB TTAB buffer
Key:       43 Size:    43422392 ( 41.4 MB) DB FTAB buffer
Key:       44 Size:     8606392 (   8.2 MB) DB IREC buffer
Key:       45 Size:     6558392 (   6.3 MB) DB short nametab buffer
Key:       46 Size:       20480 (   0.0 MB) DB sync table
Key:       47 Size:    13313024 ( 12.7 MB) DB CUA buffer
Key:       48 Size:      300000 (   0.3 MB) Number range buffer
Key:       49 Size:     3309932 (   3.2 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key:       18 Size:     1792100 (   1.7 MB) Paging adminitration
Key:       41 Size:    25010000 ( 23.9 MB) DB statistics buffer
Key:       63 Size:      409600 (   0.4 MB) ICMAN shared memory
Key:       64 Size:     4202496 (   4.0 MB) Online Text Repository Buf.
Key:       65 Size:     4202496 (   4.0 MB) Export/Import Shared Memory
Key:     1002 Size:      400000 (   0.4 MB) Performance monitoring V01.0
Key: 58900130 Size:        4096 (   0.0 MB) SCSA area
Nr of operating system shared memory segments: 9
Shared memory resource requirements estimated
================================================================
Nr of shared memory descriptors required for
Extended Memory Management (unnamed mapped file).: 64
Total Nr of shared segments required.....:         73
System-imposed number of shared memories.:       1000
Shared memory segment size required min..: 1472000000 (1403.8 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 2050.4 MB
..in pool 10 608.1 MB,   99% used
..in pool 40 999.4 MB, 140% used !!
..not in pool:   34.4 MB
Processes........................: 716.8 MB
Extended Memory .................: 8192.0 MB
Total, minimum requirement.......: 10959.2 MB
Process local heaps, worst case..: 1907.3 MB
Total, worst case requirement....: 12866.5 MB
Errors detected..................:    1
Warnings detected................:    9
After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
Pls have a look at these two and let me know what could I do to proceed further.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
INFO: Central Monitoring System is [SMP]. (found in config file)
      additional CENTRAL system y/[n] ?   :
INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
INFO:
      CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
      compiled at   Jun 28 2010
      systemid      324 (IBM RS/6000 with AIX)
      relno         6400
      patch text    patch collection 2010/1, OSS note 1304480
      patchno       335
INFO Runtime:
      running on    saptqa01 AIX 3 5 00069A8FD600
      running with profile   /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO profile parameters:
      alert/MONI_SEGM_SIZE = 200000000
      alert/TRACE          = 1
      SAPSYSTEM            = 30
      SAPSYSTEMNAME        = TQA
      SAPLOCALHOST         = saptqa01
      DIR_CCMS             = /usr/sap/ccms
      DIR_LOGGING          = /usr/sap/TQA/DVEBMGS30/log
      DIR_PERF             = /usr/sap/tmp
INFO:
      pid           4165682
INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct 3 2008, kernel 6400_20020600_254, platform 324 (IBM RS/6000 with AIX)]
        segment status     ENABLED
        segment started at Tue Sep 14 09:35:56 2010
        segment version    20040229
ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
       Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
       Please change configuration with profile parameters
           ipc/shm_psize_01 = -<different pool nr>
       xor
           ipc/shm_psize_13 = -<different pool nr>
EXITING with code 1

Big Problem With Solution Manager EHP1 ?

Dear all,
I have already installed SAP Solution Manager EHP1, after the installation sucessfuly. I check the function: Project Administration ( T code : Solar_Project_Admin), then select New project button.
The program inform that:
"Runtime Errors: Message Type Unknow
What happened:
Error in ABAP Application program
The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated because
it has come across a statement that unfortunately cannot be excuted.
etc
Do you know about this problem, what is the errors ?
Thanks all.

Dear all.
With Solution Manager EHP1
SAP Basis: SAPKB7001-SAPKB70016, SAPKB70101-SAPKB70102
SAP ABA: SAPKA7001-SAPK70016, SAPKA70101-SAPKA70102
Detail log as below:
Runtime Errors MESSAGE_TYPE_UNKNOWN
Date and Time 28.04.2009 16:47:15
Short text
Message type " " is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Only message types A, E, I, W, S, and X are allowed.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_UNKNOWN" " "
"SAPLSPROJECT_SYSTEM_LANDSCAPE" or "LSPROJECT_SYSTEM_LANDSCAPEU28"
"SPROJECT_SYSL_CHECK_CENTRAL_SY"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Information on where terminated
Termination occurred in the ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" - in
"SPROJECT_SYSL_CHECK_CENTRAL_SY".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 29
of the (Include) program "LSPROJECT_SYSTEM_LANDSCAPEU28".

CPS on Solution Manager EHP1?

Folks,
Any idea whether we can install CPS in Solution Manager EHP1 (7.01) system with Java EHP1 (SP4)?
The CPS software is available under NW 7.0.
Regards
Chandu

Hello Cheeti,
you can install SAP CPS on SAP Solution Manager and SAP CPS is actually quite independent on Java support package (but choose the right NW release 7.01), i.e. you do not always have to update you SolMan system if you install a new CPS release.
However, if you read through the SAP CPS Installation Guide (Scheduling) you will find the recommendation to install SAP CPS on a separate server. That might not necessarily be the case for test or demo installations and of course also depends on your utilization of SAP CPS.
Have you considered these things:
Sizing: How does the ressource consumption of SAP Solution Manager influence you SAP CPS scheduler? Will important jobs be delayed?
Are there sufficient RFC resources for all application? (SolMan, Wiley, CPS all these application need to communicate with the managed systems)
Do you want to entangle the lifecylce management of SAP CPS with SAP Solution Manager? Which production do you want to update more/less frequently? Can you accept additional down times?
Kind regards,
Martin

Configuration of MOPZ on Solution Manager EHP1 ST 400 Patch 18

Dear Team,
Request you to let me know the Procedure to Configure MOPZ on Solution Manager EHP1 ST 400 Patch 18, i am struck in between, if any one can send me any document regarding this will be highly appreciated.
Regards,
Adarsh Kumar

Hello,
You can have a look at the Maintenance Optimizer quick startup guide at the Wiki:
https://wiki.sdn.sap.com/wiki/display/SM/Overview
Please let me know if you have any comments / feedback about the Wiki.
Best regards,
Miguel Ariñ

Solution manager, PI and ERP incl FICA (IS-U) test systems on same HANA DB server Appliance

Hello
I wander is it possible to have Solution manager, PI and ERP incl FICA (IS-U). All for test/system purposes:
I am sure we need separate application servers for Solution manager, PI and ERP incl FICA (IS-U),
I would have question regarding Appliance i.e Hana DB server. can Solution manager, PI and ERP incl FICA (IS-U) products reside on same Appliance i.e Hana DB server in MCOS or MCOD? (I am sure that for production use this is no-go option)
What is the case when renting cloud solution?
Thank you a lot in advance
Jan

Check the java part, most of the Solman Web Based thing use the java, check the management console to ensure message server and dispatcher proper work, normally is: http://hostname:50113.
If central note give you problems deimplement all the not complete implemented notes and use SUM
and MOPZ to update your system with the last SP, then apply the central note acording to your SP level.
We found that have the system in the last level prevents a lot of problems because of not complete implemented notes.

Relationship between Solution Manager Diagnostic and CCMS

We are just now looking at Solution Manager Diagnostics and central monitoring in Solution Manager. One thing we are not clear on, and haven't seen anything definitive on, is the relationship between these and CCMS.
Any insight or link to documentation would be greatly appreciated.
Thanks!
Jeff Henke

Solution Manager Diagnostics is a diagnostic tool, not a real-time monitoring and alerting tool. CCMS is for real-time monitoring and alerting, and SMD does in fact get data from your CCMS agents, as well as from saposcol and Wily Introscope.
Hope that helps,
David.

Solution Manager DEV and PRD box

In my landscape i have 2 systems for solution manager SMD and SMP , what is the ideal way sap community is using them ...should i divide the solman roles among them or how the 2 system landscape of solman is used ..
Regards

Hello Tiger,
In my experience many SAP customers have a one or two system landscape in Solution Manager.
For customers whose main line of business is providing service with the Solution Manager, I would recommend a three system landscape (dev, qas and prd). For customers who run less critical functionality with Solution Manager, and when costs of hosts for the Solution Manager systems are an issue, one or two tier system landscapes can be also considered. Other than this, I don't know any document with precise guidelines to answer your question. At the end it all depends on the scenarios you want to run, and how critical the functionality you run with Solution Manager is for your company.
Best regards,
Miguel Ariñ

System monitoring configuration in solution manager EHP1

Hi all
I am in a bit of fix
We have upgraded our solution manager devlopment to EHP1
Now I have added one system through SMSY in solution manager to configure system monitoring
I have generated all the RFC's,I have created the logical component and solution and assigned the system to the solution
When I check my solution it is looking fine
Now when I go within solution and click on the tab system monitoring
It shows me on the left hand side -> Set up system monitoring
when I click on Set up system monitoring on the left part of SAP screen,strangely it doesnt take me to the activation of screen monitoring,it just shows me the best practices documents on the right side but nothing more than that
I have checked many guides,blogs and SAP tutors anfd have followed them but strangely I am not been able to go to the screen for activating system monitoring
Are there any activities that need to be done after upgrading to EHP1?
Are there any services to be activated for system monitoring?
Please advice
Rohit

I'm not 100% sure that it is necessary, but it won't hurt.
Perhaps the essential adjustment you need for system monitoring is being done in there.
It won't hurt

Email and SMS Alerts - Solution Manager - PI and EP

Hi All,
I am trying to do the below scenario.....But somehow i am lost in the process.
I have a three system PI landscape and a Solution Manager. I have included the DEV PI in solution manager for CCMS,the CCMS agents are online and it also reflects in RZ20.
Now the requirement is SOLMAN should send email and sms alerts in below situations which occur in PI system.
1.The ABAP or JAVA engine goes down.
2.One of the filesystem crosses certain predefined limit.
3.Any of the java server node stops working
4.If any critical job gets cancelled in sm37
I am looking at steps on how to define the alert categories, auto reaction methods, also the nodes where i have to assign these auto reaction methods.
I have gone through CCMS documentations, played all sim files and gone through most of the pdf files but i am not able to establish proper steps to do it.
I am Redhat Linux,Oracle 10g, SOLMAN 7 with PI7
Can i extend the same for the EP systems also which are pure Java Stack Systems ?
Also i would like to know if i can send customized alert messages.
Best Regards
Raghu

Hi Juan,
Thanks for your response.
I am looking at the MTE classes i.e for the above situations which MTE classes are required.
Also i have read in some document that we can send the alerts directly to the email IDs and cell numbers without having to mention them in user masters in SU01. Where to mention these ?
I have my SCOT settings done for email servers.
The process which i had built up in my mind is all mixed up and i am lost where to do which configuration
Best Regards
Raghu

BPM, Solution Manager, XI and Workflow

Hello all,
I read that in XI/P, BPM uses the Workflow engine.
I also heard about the BPM in Solution Manager.
What is the difference between BPM in Solution Manager and BPM in Workflow? Do both systems use the old Workflow engine?
TIA

.

SAP Solution Manager - Learn and Use

Hi All,
I have some knowledge in SAP ABAP. I am interested to learn about SAP Solution Manager and how to work in it.
Can anyone help me in this regard? If you have any documents or presentations, please let me know.
Thanks in advance.

Hi,
First start with learning what solution manger can do.
http://service.sap.com/solutionmanger
then click on Media library on left hand pan there first go through use case presentations, which will give an insight into possibilities.
Then you can explore more.
Hope this helps.
Feel free to revert back.
--RAgu

Project management in SAP Solution Manager (SOLAR_PROJECT_ADMIN and RMMAIN)

Please help me to understand this better u2013 whether this is a gap in the functionality of the SolMan, whether I expect too much, whether it is expected to work in a different way.
In transaction SOLAR_PROJECT_ADMIN one can create a project.
In transaction RMMAIN one can create a roadmap u2013 this is a more or less detailed project plan that can even be exported to MS Project. Via RMDEF and RMAUTH it is possible to create a custom specific roadmap. This specific roadmap can then be assigned via SOLAR_PROJECT_ADMIN and RMMAIN to the newly created project.
However, it is not possible to modify the roadmap once assigned in SOLAR_PROJECT_ADMIN and created in RMMAIN.
This means, as a consequence, that it is not possible to use the Solution Manager as the one and only project management tool.
To specify this further. Usually, in a project, once you have created the roadmap and the overall framework you add all the detailed steps, and all single tasks that are required. As this is not possible in SolMan one needs to use other tools (MS Project) for this. But on the other side the SolMan project plan and roadmap has to be updated frequently to be able to keep track of the progress. So this ends in double work. Manual effort is required to keep this consistent. And it also hardly makes sense to create a new roadmap just to add these small details. With all this in mind itu2019s hard to convince our customers that the SolMan is really a that big benefit for implementation or upgrade projects.
- have I overseen something?
- has SAP designed this in a different way?
- or does SAP oversee this need?
Many thanks & best regards,
Peter Müller

Hi
1) Is deleting older documents is definitely going to improve response time of searching. You said 'yes' but just wanted to double sure.
Yes
2) This program deletes all unsed and de-linked document. I can understand 'De-linked' but not 'Unused'
i meant the samething
3) Deleting documents based on user id is big problem. We have almost 800 Users in SolMan, who has used this project form last 5+ years. So all these 800 users have to go into multiple selection of user id
Try giving *
4) I tried this on our sandbox (SP19 Level) which has shown all unused documents which can be deleted. But this deletion has to be done one-by-one. In our production, if we have 10K+ documents, i assume almost thousand or more will be residing as de-linked in KW
Try giving *
5) Any Documentation available on this program.
Learnt by experience but you can check some sapnotes below
Note 1124579 - Using SOLMAN_UNUSED_DOCUMENTS to delete unused documents
Note 1377997 - SOLMAN_UNUSED_DOCUMENTS: No deletion conf. for each doc.
Hope above clarifies
Regards
Prakhar

Solution manager, SLD and SAP MC

Hello,
It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
Thanks
Shaiikil

We can stop, start SAP services from NWA. Now we cannot say Netweaver, NWA and MMC are similar...
MMC is a tool/enviroment provided by microsoft for starting stopping services, managing user rights, security settings, policies and so on...
this can never be compared with SAP Environment for similarities.
Feel free to revert back.
-=-Ragu

Solution Manager/Charm and Transport Dependency Check

Hello Everyone,
I apologize if this question has an obvious answer. I have searched SDN and could not get a 100% answer.
We are just now in the process of rolling out Charm/Solution Manager and I have noticed that it appears to not perform transport dependency checks. For example, let's say I am working on object ABC and have completed my testing (ready for transport to production) and then another developer also starts development on object ABC. When my change is moved to production, it will pick up the other developers modifications without giving a warning or an error that a dependency has been encountered between the two transport requests.
Does Charm/Solution Manager offer the option of producing a warning should a transport depedency be identified? If so, will someone explain (or point me to the appropriate documentation) how this can be set up?
Best Regards,
Scott

Hi Scott,
ChaRM supports imports from DEV->QAS->PRD by transport by transport requests level not by transport request task level. So don't worry(i.e., You can't import only your change of object ABC to production. It allows to import your change and other user's change of object ABC together to production).
This is how it works(if more than an user works on the same object):
1. Requester creates a support message from satelitte system to report a problem.
2. Service desk employee creates a change document because some changes need to be done on object ABC to correct that reported problem.
3. Change Manager approves the change document. So a normal correction is created automatically.
4. This normal correction is assigned to 2 developers(your scenario) like for an example DVPR1 and DVPR2.
5. DVPR1 creates a transport request and does some changes on object ABC. So a transport task will be created for DVPR1 under that transport request automatically.
6. When DVPR2 tries to do some changes on the same object ABC, a seperate transport task(not a transport request) will be created for DVPR2 under the same transport request because the object ABC is locked under the transport request. So DVPR2 can't create a separate transport request for the same object if any transport request is pending(not released).
7. Now object ABC will have one transport request. That transport request will have 2 transport tasks(1 for DVPR1 and 1 for DVPR2).
8. Each developer relases their transport task only(not transport request) once he/she completes his/her change on the object ABC.
9. DVPR1 or DVPR2 will change the status of normal correction to "Development Completed".
10. Now, IT operator or DVPR1 or DVPR2 can release the transport request. The transport request can be released only if all tasks are released under the same transport request.
(In this example: DVPR1 completed his change and released his transport task. Next DVPR2 completed and released his transport task).
11. Finally IT operator import the transport request to QAS and PRD.
Hope you are clear now. Let me know if you have any doubts.
Regards,
Sanjai

Solution Manager EHP1 and BW cubes

Similar Messages

Maybe you are looking for