Solution Manager EWA - cannot create session in satellite system

"Hi,
I want to configure EWA self service using Solman 4.0. I succesfully did the following :
a. Maintained SMSY and create the required trusted RFC connections from SM to satellite system. All connection and authorization passed in SM59. I used SAP_ALL/SDCCN_ALL role and assigned objects S_RFC*.
b. Assigned the system to a logical system.
c. Created the a new solution and activate "Solutions Monitoring > Earlywatch Alert"
d. Activated and maintained required RFC in SDCCN in satallite system.
My problem is that the create EWA alert request (Red Flag with a specific session number ) coulnd be pass to the satelitte system even though all the trusted RFC and authorization is set. When i execute the SESSION_REFRESH in the satellite system, the session is not created.
Did I miss out any steps. Can any one share any help ?
FYI, there is no connection to SAPOSS yet, so i did not manage to run RTCCTOOL completed, but i doubt this is required for EWA self service."
I have the same problem as Solution Manager EWA - cannot create session in satellite system
tried all of solutions, but it does not help... Created the CM (high) for SAP, but get 1 response for 1 week from them:(

Dear Sapbcer,
Have you tried the following option :
Execute SMSY and from the Server entry Execute the "Read System Data Remote" option in change mode.
Save the data captured and then try using Refresh Session Task from SDCCN of the satellite system. Do select the RFC for Solution Manager while performing this task.
Hope this helps.
Regards
Amit

Similar Messages

While creating message in Satellite system we would like to get popup scren

Hi Gurus,
While creating message in Satellite system we would like to get a popup screen that should populate/show list of persons responsible/Business partners to whom the mail should go directly to their mail box. Do we have to develop a report for it or can use an already existing job?
Thanks in advance,
Vinod Palli

Hi you can create messages from two places either from the standard help menu.
help->create support message
or
test workbench status message->click messages tab and then click create button.
Now go to tcode Solution_manager
select your landscape and then press execute button you will get the list of all messages with status ,person create d and person responsible.
if you click any one you can go into the details of the same.
PLEASE :reward point for the same.
Regards
Prakhar

Cannot create temp directory: The system cannot find the path specified

Hello
I am getting Cannot create temp directory when deploying to Oracle AS , can any one help ?
---- Deployment started. ---- Apr 23, 2007 8:20:29 AM
Target platform is Oracle Application Server 10g 10.1.3 (WEBQA01).
Wrote WAR file to C:\ide\jdeveloper\jdev\mywork\Upload\Upload\deploy\fileupload.war
Wrote EAR file to C:\ide\jdeveloper\jdev\mywork\Upload\Upload\deploy\fileupload.ear
Operation failed with error:
Cannot create temp directory: The system cannot find the path specified
Deployment failed
Elapsed time for deployment: 8 seconds
#### Deployment incomplete. #### Apr 23, 2007 8:20:37 AM

In Windows, setting the Environmental Variable sometimes DOES NOT WORK.
The -Djava.io.tmpdir=C:\temp setting must be made in the server properties of the oc4j in order for it to work.
Jae

Updated Solution Center, get cannot create DIHPAiOFaxManger object error message on 'Send a Fax'

The printer is an OfficeJet J4540 All-In-One, running on Vista Home Premium x64. The orginal Solution Center faxed without any problems. I upgraded to new Solution Center and when I click on 'Send A Fax' I get this error message: "cannot create DIHPAiOFaxManger object". My OfficeJet can and does send faxes manually, but I would like to use the Solution Center. Please, help!!!
neptune49

This might have been a quirk of the installation. So let's try to perform a complete and clean uninstallation and reinstallation. First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-58704-2&cc=us&dlc=en&lc=en&...
Install that and let me know the result!
As an additional side note, you should also be able to use Windows Fax and Scan to fax from your PC as well.
Have a great day!

Solution manager EWA report frequency

Hi all
In Solution manager we have early watch alert configured for weekly basis. But we need to change it to monthly basis.
In solution manager, when I execute solution_manager, and EWA reports I get reports for every one week. Where can i change this frequency?
Thanks
subbu

Ok, I see...
I also submit a monthly report. I created a Ms-Word template based on a real EWA report.
I customized it for my own use.
but all these steps are manual and it usually takes me about 30 minutes to generate the report by fetching proper information.
so, go get the most important information from your EWA report such as disk usage, CPU usage, user count etc... and forget about the rest.

Solution Manager Enterprise Edition - Creating Service Desk

Hi All...
Being a Channel Partner of SAP we have authority to sell sap licenses to our customers.
Now we want to setup a service desk for them in our Solution ManagerEE.
Could you please help me to understand....
1> I am not able to understand the extra functionality of SolMan EE with respect to Service Desk creation.
     Do we really required EE for Service Desk? or with just normal SolMan we can setup that?
     2nd is...
2> I am not able to understand how do I can create system in SMSY, because possibility of having same SID for any of our customers.
     I am not sure how do I can setup a Service Desk for each customers separately.
     If any one of you guys have did same kinda config. before, please guide me....
Thanks!
Amit
Edited by: amit bhisekar on Oct 28, 2008 7:12 AM

> 1> I am not able to understand the extra functionality of SolMan EE with respect to Service Desk creation.
>      Do we really required EE for Service Desk? or with just normal SolMan we can setup that?
SolMan EE has some additional functionality but that is not related to the service desk. A "normal" solMan is enough.
> 2> I am not able to understand how do I can create system in SMSY, because possibility of having same SID for any of our customers.
You can use SIDs like "SID_A" and "SID_B".
>      I am not sure how do I can setup a Service Desk for each customers separately.
Follow the IMG - and note 1023598 - SAP Solution Manager Service Desk for service providers
Additional info:
Out of my experience with the service desk: We are using it since SolMan 2.2 and if we could choose again we would definitely use a different product because
- as soon as you drift away a little bit from the standard configuration, that you can use by default (but often needs adaption) it becomes really complex. Support desk is based on CRM so make sure that you have CRM knowledge (including PPF) in house if you want to do the configuration alone
- after each service pack/support stack installation something is not working and almost each time we need help of the support (OSS/CSS) to get things fixed again
- Bidirectional communication is not possible, you can send answers/inquiries to the message creator but answers are not "automatically" put back into the system (e. g. Mail parsing). That is the biggest drawback
- The UI (if you use the GUI) is.. well... not really intuitive
Markus

Cannot create session with in-memory HSQLDB

Hi,
We are trying to using Toplink with HSQL in the "memory-only" mode (ref: http://hsqldb.org/doc/guide/ch01.html#N101CA). Note that the connection URL has "jdbc:hsqldb:mem" to denote a memory database .
We are having problems creating a valid session to the database. I am able to load the sessions file successfully, and when I call the getSession() method on the Session Manager, I get a null session, but no exceptions are raised.
Is there any way to turn on more diagnostic logging to see what parameters is are being used to create the session ?
Here are the details :
//===> CODE SEGMENT TO CREATE A SESSION
 // Loads the specified sessions.xml file
 XMLLoader loader = new XMLLoader(sessionsFileName);
 _session = (Server) SessionManager.getManager().getSession(loader, sessionsName,getClass().getClassLoader(), false, false);
//====> NO EXCEPTIONS THROWN HERE
 LogMgr.logInfo(this, "Is session null ? " + (_session == null));
//====> SESSION IS NULL
 } catch (TopLinkException tle) {
tle.printStackTrace();
//====> NO EXCEPTIONS ARE RAISED
//====> RELEVENT PORTION OF sessions.xml
<login>
<driver-class>org.hsqldb.jdbcDriver</driver-class>
<connection-url>jdbc:hsqldb:mem:IMPACT3</connection-url>
<platform-class>oracle.toplink.internal.databaseaccess.HSQLPlatform</platform-class>
<user-name>sa</user-name>
</login>
ENVIRONMENT
Toplink 9.0.4.2
HSQLDB 1.8.0
Windows XP / Solaris 2.8 / AIX 3.5

The call:
_session = (Server) SessionManager.getManager().getSession(loader, sessionsName,getClass().getClassLoader(), false, false);is where the sessions.xml file is loaded. The created XMLLoader is used but its creation is not actually doing the load.
It is rare to get a failure at this point since you have not requested the session manager to login the session and thus connecting to the in-memory database is not actually attempted in the code you have provided. Only resolving the mapped class and JDBC driver requiring proper class path configuration.
In your sessions.xml you will want to make sure logging and debug logging are enabled. Your sessions.xml should contain something like:
 <enable-logging>true</enable-logging>
 <logging-options>
 <log-debug>true</log-debug>
 <log-exceptions>true</log-exceptions>
 <log-exception-stacktrace>true</log-exception-stacktrace>
 </logging-options>If that does not work I would do some simple diagnostics on your configuration. I would start with using the same sessions.xml and TopLink Map (project) attempt to connect to a different database and ensure that the configuration is accurate.
Doug

Solution Manager 7.1 SP4: Session Timeout during SOLMAN_SETUP

Hello Experts,
We recently installed Solution Manager 7.1 SP4 on Linux/Oracle. We also completed the System Preparation and Basic Configuration part of the SOLMAN_SETUP wizard as well (which includes applying the Central Correction Note and other steps).
During the Managed System Setup Part, as soon as we click on the Configure System for a managed system - a new window opens up and immediately we get the below timeout messages:
This session will terminate due to inactivity in 0:00 minutes
To continue working in this session, choose 'Continue Session'
The above is immediately followed by the actual session timeout message:
This session terminated due to inactivity.
Click Close Popup
or to start new session, press F5.
Now even if we press F5/Refresh, the same cycle repeats.
I already checked the ICM timeout parameters as mentioned in the Guide and further findings with regards to ITS update as in thread WEBGUI Timeout immediately after logging in
Applying the latest kernel patch also did not help. The strange issue is that the session timeout occurs only the LMDB related services, wherease normal services like WEBGUI etc work fine.
Please suggest if anyone came across this issue, especially after update to SP04.
Thanks and Regards,
Srikishan

Hi,
Thanks, I will check the note steps and close this thread accordingly.
Perhaps I need to hone my notes searching skills !
Regards,
Srikishan

I get an error message 'Cannot create session cookie'

Hello,
This is the exact error message I receive:
"Time: 2011-04-05 14:47:47
OUCU: zz767748
URL: /science.level1ayrf.s104/
TN: openmark @ ltsweb2
Status: 403
Title: Unable to create session cookie
Message: In order to use this website you must enable cookies in your browser settings."
Many thanks,
Rachel

No idea what causes it, but it does happen. Try this.....
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again.
Or this ....
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again.

Service Desk - Create Message from Satellite System

Hi Guru,
I'm learning SAP Solution manager service desk tools (on EHP1 SP22). I've managed to activate it and I can create the message from satellite system (with SLFN as default transaction type). Is it possible to change default of transaction type while creating support message from satellite system (e.g. using ZSLF, etc)?
Appreciate for your input.
Thanks and Regards,
Yan

Yes. It is very much possible.
Use transaction - SPPFCADM
select the row - DNO_NOTIF
click on - Define action profile and action
Select the action profile - SLFN0001_STANDARD_DNO
Select the action - SLFN0001_STANDARD_DNO_CRM
in processessing type, change the container value to ZSFN.
Hope this will be helpful.
Regards
K.Kumar

Solution Manager trace file ? Details of all systems messages ?

Hi,
I had developed custom applications involving different systems like IDES, R/3, File system and web services and BPM scenarios.
These systems are integrated with XI, and now I want to monitor the message exchanges between these systems.
I need all information (in form of txt or log trace file) containing
which systems are involved. Parameters used during communications data exchanged between them or message header, content of the messages etc.
As far as I know log files contain lot of information about user activities like transactions executed, messages exchanged between systems etc......I already tried to monitor the log files at XI level, but it contain very less information about the executions.
Solution manager and remote systems configurations are already done.
I have the following questions.....
1) Will Solution manager be the right choice to monitor such information ? If yes, then where and how ?
2) Is there any combined log file in solution manager which contain all log information about the connected systems ?
3) Where I can find the log files of solution manager ? (Is there a single file which contains all information?)
4) How communication (message exchanges) between composite applications is monitored in SAP ?
How to switch on tracing for Log file (which trace level and what settings), offcourse it will generate lot of data
Regards,
hussaan

Hi,
Please download that attachment "scripts_1139623.sar" provided in SAP Note 1139623 - Using transaction RZ20 to monitor remote Oracle databases.
Upon extraction of scripts_1139623.sar the following files you will get.
rz20_nonabap.sql
dbcheckora10_oltp.sql
dbcheckora.sql
Then Perform the below mentioned Steps to resolve your issue.
Step 1: Create tables DBCHECKORA and DBMSGORA:
sqlplus SAPSR3DB/<pwd>
SQL> @rz20_nonabap.sql
Step 2: Fill the table DBCHECKORA:
sqlplus SAPSR3DB/<pwd>
SQL> @dbcheckora10_oltp
Step 3: Create the synonyms (as user ora<sid>):
brconnect -u / -c -f crsyn -o SAPSR3DB
sqlplus "/as sysdba"
CREATE PUBLIC SYNONYM SAP_DBSTATC FOR SAPSR3DB.DBSTATC;
CREATE PUBLIC SYNONYM SAP_DBCHECKORA FOR SAPSR3DB.DBCHECKORA;
CREATE PUBLIC SYNONYM SAP_DBMSGORA FOR SAPSR3DB.DBMSGORA;
Step 4: Grant Privileges for OPS$<SID>ADM User for the above created Tables
sqlplus "/as sysdba"
grant all on SAPSR3DB.DBSTATC to OPS$<SID>ADM;
grant all on SAPSR3DB.DBCHECKORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBMSGORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTAIHORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATHORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATIORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATTORA to OPS$<SID>ADM;
commit;
Step 5:
Now after successful execution of above mentioned Steps , in DBACOCKPIT (system configuration), try to save the Remote DB entry with "Collect Alert Data". It will be saved without any error.
If you find any errors, post the error contents as a reply of this thread message.
Regards,
Bhavik G. Shroff

Solaris 9 - INIT: Cannot create /var/adm/utmpx (System Hangs)

Hello,
I am unable to boot into solaris 9 after I did a init 0. I did init 0 because shutdown -y -g0 -i0 did not work.
This is the error message I get
Hardware watchdog enabled
INIT: Cannot create /var/adm/utmpx
INIT: failed write of utmpx entry:" "
INIT: failed write of utmpx entry:" "
INIT: SINGLE USER MODE
Type control-d to proceed with normal startup,
(or give root password for system maintenance):
After it asks for the password it HANGS.
I entered the password, but NOTHING HAPPENS.
I can go into sc console though.
I also rebooted using Solaris 9 cdrom in single user mode. Checked the filesystem using fsck, and no faults were found. I also tried creating a new /var/adm/utmpx file but that did not work too.
Any help would be appreciated,
Thank you,
Jacob.

Hello,
Check for /var filesystem usage,if it is not mouted as seperate filesystem then check for "/" FS usage.
There may be chances you get to have this problem if your FS is full.
If everything normal then follow the below steps, which solved similar kind of issues in the past for me.
Logon to the system and when you get prompt just run fsck on your root filesystem.
Check /etc/vfstab file to ensure that you are running fsck on correct fs name.
After completing fsck just say "reboot". The machine will boot normally.
In b/w is this machine disks are mirrored?? if so then you may need to choose the disks carefully before you run fsck.
thanks.

Solution manager 4.0and Netweaver 2004s - same "SAP system ID???

Hi,
Can we install solution manager 4.0 and Netweaver 2004s on same AIX machine with same "SAP system ID" ?
Thanks

No, that's not a good idea because the system ID is part of the file system. And the system ID is used to mark your systems unique.
Best regards
Rainer

Business Contact Manager - O365 - Cannot create database

I am trying to install Business Contact Manager into Outlook 2013, but once the install finishes and I fire up Outlook, the BCM setup runs. Regardless of which options I choose, I wind up with a "Database creation was unsuccessful" message.
I have tried all the tips in other forums, but nothing has changed the behavior. I have a feeling it has something to do with the SQL Express 2008 it installs as part of the process. Event Log messages say something about SQL, but nothing definitive.
Has anyone successfully installed BCM on Outlook 2013 (Windows 8.1 pro)?

Hi,
Please refer to this kb below:
https://support.microsoft.com/en-us/kb/942496
Althought the kb is for Outlook 2007, it can still be a reference in your scenario:
This problem may occur if the SQL Server (MSSMLBIZ) service is not running. The SQL Server service is required by Business Contact Manager. This problem occurs because the Windows Welcome screen may prevent the SQL Server service from starting when you first
restart the computer after you install Office Outlook with Business Contact Manager.
Please try if this helps:
Exit Outlook.
On Desktop, right-click This PC, and then click Manage.
Click Services and Applications.
Double-click Services.
In the services pane, click SQL Server (MSSMLBIZ).
Click Restart the service.
Exit Computer Management, and then start Outlook.
If the issue persists, what does the event log messages say? If there's not much private, please post the logs in the forum.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Changing Solution manager landscape and having a Virtual production system

We have a 2 line landscape like this
Line1: DEV1 - QAS1 - PROD1
Line2: DEV2 - QAS2 - VirtualPROD.
During our golive pahse the QAS1 in Line1 will be replaced by the QAS2 in Line2 and Lin 2 will be on hold for a while.
My questions,
1) does any one have any experience in topic?, on how to change the system landscape without closing any tasklist/maintenance cycle or project.
2) We have some problems with logging on to QAS system from the change request when having a virtual production system, it works fine from the tasklist.
Unfortunalty we can't see anything in the log.
3)When having multiple QAS systems in one Line , how can the import the change to the second QAS system be handled when using urgent correction since only one QAS is in the task list the one which feeds the production system. (Urgent correction always uses the shortest path to production)
Comments, references and all else is valuable.
br
patrik

Question #2
Apperently does the system check for a connection to the production system and since it's virtual there is no rfc , so would it be possible to create an rfc to a virtual system?

Solution Manager EWA - cannot create session in satellite system

Similar Messages

Maybe you are looking for