Solution manager EWA report frequency

Hi all
In Solution manager we have early watch alert configured for weekly basis. But we need to change it to monthly basis.
In solution manager, when I execute solution_manager, and EWA reports I get reports for every one week. Where can i change this frequency?
Thanks
subbu

Ok, I see...
I also submit a monthly report. I created a Ms-Word template based on a real EWA report.
I customized it for my own use.
but all these steps are manual and it usually takes me about 30 minutes to generate the report by fetching proper information.
so, go get the most important information from your EWA report such as disk usage, CPU usage, user count etc... and forget about the rest.

Similar Messages

  • Solution Manager EWA - cannot create session in satellite system

    "Hi,
    I want to configure EWA self service using Solman 4.0. I succesfully did the following :
    a. Maintained SMSY and create the required trusted RFC connections from SM to satellite system. All connection and authorization passed in SM59. I used SAP_ALL/SDCCN_ALL role and assigned objects S_RFC*.
    b. Assigned the system to a logical system.
    c. Created the a new solution and activate "Solutions Monitoring > Earlywatch Alert"
    d. Activated and maintained required RFC in SDCCN in satallite system.
    My problem is that the create EWA alert request (Red Flag with a specific session number ) coulnd be pass to the satelitte system even though all the trusted RFC and authorization is set. When i execute the SESSION_REFRESH in the satellite system, the session is not created.
    Did I miss out any steps. Can any one share any help ?
    FYI, there is no connection to SAPOSS yet, so i did not manage to run RTCCTOOL completed, but i doubt this is required for EWA self service."
    I  have the same problem as Solution Manager EWA - cannot create session in satellite system
    tried all of solutions,  but it does not help... Created the CM (high) for SAP, but get 1 response for 1 week from them:(

    Dear Sapbcer,
    Have you tried the following option :
    Execute SMSY and from the Server entry Execute the "Read System Data Remote" option in change mode.
    Save the data captured and then try using Refresh Session Task from SDCCN of the satellite system. Do select the RFC for Solution Manager while performing this task.
    Hope this helps.
    Regards
    Amit

  • Building new Solution Manager / ChaRm Reports

    Good Day
    I looking for any documentation I can get my hands on to be able to build new Solution Manager/ChaRM reports.
    Currently I am using u201C/TMWFLOW/REPORTINGu201D.
    Thanks All
    Don Newton

    Hi Don,
    Here you will find the first steps to work with Change Request Management scenario:
    First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
    Hope it helps

  • Email Solution manager task report session

    Good day,
    I am currently tasked with generating task session reports from solution manager. Systems I am reporting on are ECC 6.0, BI, CRM & PI. I can generate reports fine, however I would like to setup solution manager to send these task session report to a list recepient vial email directly from solution manager. It should be like EWA reports send via email in this case I want to send task session report after I have completed the checks.
    1) Is it possible to setup solution manager to do that?
    2) I want to be able to highlight all issues that I have picked like how EWA highlights its alerts.

    Hi
    the task "early watch alert for solution manager" created automatically when did you perform the task "refreh session" or "Maintenance Package"
    please create the  relevant task, via : SDCCN -> Task -> Create ->Request session data ->Periodic -> Earlywatch Alert -> Continue.
    'Schedule' the start date of the first session  and - Task -- create Click on 'Refresh sessions' - Press 'Enter' - Select 'Now', to schedule the job 'immediately. once you create the relevant tasks you go by,  in the Menu -  Goto -> start - to activate the Earlywatch alert session Now, you can check the finished EWA task in 'done' tab.
    Login to Solution Manager, goto trx. DSWP --> Select your solution, Solution Monitoring - Earlywatch alert -  Click on Earlywatch alert --> start service processing --> Press 'OK' to start the background job - click 'Refresh'
    Now, you can see the 'Early watch alert' in the green colour .
    more further refer here [EWA guide|http://forums.sdn.sap.com/servlet/JiveServlet/download/156-1701991-9166329-1518/EWA_Activation.pdf]
    jansi

  • Solution Manager SLA reporting

    I use SolMan to create different SLA reports - for different clients in
    one solution.
    The problem I'm facing is that the "General Settings for
    SL Report xx" data are not saved for the report chosen, but for all
    reports: the address, header and frontpage data saved as the last for
    report x overwrites the same data for other reports. Additionally some
    data even if can be entered there, are not fully displayed on the
    report - sometimes they are shorter on the report than in configuration.
    Is it possible to save the (for example) customer data for only one
    report, and the different data for the other report?

    Hello,
    No there are not any daily reports for Alerts on Solution Manager.
    However there is a reporting functionality in Central Performance History Reporting in the Alert Monitor.
    The functions of the Central Performance History (CPH) include creating report definitions and reports. You can also call these functions from the Monitoring Attributes - Detail Data screen in the Alert Monitor. All reporting functions are available to you, and operation is simpler (especially for creating standard reports):
    You can find more at this link: http://help.sap.com/saphelp_nw70/helpdata/en/28/2809fb836924409478389f9e63581b/content.htm
    Regards,
    Paul

  • Solution manager-url report

    Hi,
    I have uploaded a lot of documents in solution manager. Now i need to get a report that brings to me all documents with their url links. Anybody knows some report or some way to get this information?Thanks!
    Regards,
    Guido

    Hi Guido,
    Did you manage to solve your query ? If so, can you please share your insights on the work-around or the solution ?
    If you had not commenced the exercise, [this|https://forums.sdn.sap.com/click.jspa?searchID=13895872&messageID=5213229] thread explains the way way you can generate URLs for individual documents.
    Regards,
    Srini

  • EWA reports generating Twice

    Hi,
    In my solution manager EWA reporting generating twice for all systems ( 3 times for few systems) and also scheduled twice (3 times for few system ) for next week.
    Request you to help me on this issue.
    Thanks for you valuable help and support
    Thanks & Regards
    Reddy

    Hello,
    There should be two periodic tasks scheduled in SDCCN on managed ABAP systems.
    Service Preparation and Maintenance Package Task. That is all that should be scheduled.
    If you see any "refresh session" or "Earlywatch Alert for Solution Manager" sessiosn scheduled as a periodic tasks, they should be removed from the todo tab, as you can get an EWA for each one.
    Most often duplicate EWA reports are caused by misconfiguration ij SDCCN on DSWP where indeed more than one EWA is being created due to the setup.
    I would best guess you have incorrect SDCCN tasks scheduled as periodic tasks, when they should be driven by the Maintenance Package task as designed.
    Check the periodic tasks in SDCN....typically you only should have  the Service Preparation and Maintenance Package.
    No other tasks should be scheduled as periodic tasks. While thre are other SDCCN tasks that get run when you deliver a service or perform certain analysis, they are not periodic tasks. I
    The other exceptions is when the EWA is being processed at SAP and not on Solution Manager, then there would be an EWA tasks sheduled as a periodic task with the RFC destination SDCC_OSS (SAP)
    Regards,
    Paul

  • EWA Report not being sent for two systems

    Hi Experts,
    We are having one issue in EWA Report in solution manager. Searched hard but could not find solution.
    Our solution manager is configured to provide EWA for 4 systems- ECC, BW, PI and Solution manager itself.
    The configurations are in place to the extend that we are able to view the weekly reports in Solution manager.
    Issue is -
    1. We are able to recieve mail notification for Solution Manager and ECC but not able to get for BW and PI.
    2. The ECC report is coming ok, but Solution manager report is blank.
    The places I checked the configuration -
    1. SDCCN for all systems.
    2. SOLMAN_EWA_ADMIN - all systems active and chcked for EWA
    3. Background Jobs for all systems -Maintenance Package, Refresh Session, Earlywatch Alert for Solution Manager
    4. Background Jobs related to the task including SM:EXEC SERVICES
    Later on I deleted and rescheduled the job SM:EXEC SERVICES to make sure it covers all systems.
    Data is visible in Solution Manager but report is not being sent over mail for two systems- BW and PI.
    Solution manager report is being sent but empty.
    Please suggest.
    Regards,
    Sabita

    Hi,
    what is your ST verison? check this note applicable or not
    [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931]
    and chek the version of your service updated ST_SER too, patch this also solve the issue
    refer this [Note 1482818 - Service updates ST-SER 701_2010_1|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0001482818&nlang=E]
    Jansi

  • Custom development in Solution manager(SolMan)

    Hi All.
            I need information on possibility of developing custom code in Solution manager(SolMan) environment. Any information on how we can the extract data from different systems and integrate it in Solution manager for reporting using custom code will be helpful.
      thanks in advance.

    hi,
    you can also have a look at my article:
    http://www.solutionmanagerexpert.com/article.cfm?session=&id=3513
    this may give you some more ideas how solman can be used with XI
    Regards,
    Michal Krawczyk

  • EWA report is not showing in solution manager 7.1 SPS10

    Hi Experts,
    I have configured EWA in solution manager 7.1 SPS10 as per guides and best practices and managed system is showing perfectly for MOPZ configuration, RFC's are working fine but the Background job SM:EXEC_SERVICES completes in a  few seconds with job log content showing the error
    Alerts for system DEV in solution 'Development systems' cannot be sent (denied by customer)
    The EWA alert is generating successfully in managed system and available at service market place but it is not showing in solution manager because of the above mentioned error
    Please let me know any solution for this problem.
    Thanks,
    Bharat.

    Bharat,
    Note  1907383 - How to setup and troubleshoot EarlyWatch Alert reports in SAP Solution Manager 7.1  should have most of the answers related to EWA
    Also Make sure you add the system to active solution by using "Put in Solution".
    "Alerts for system DEV in solution 'Development systems' cannot be sent (denied by customer)"  this msg is for sending alert to SAP. check if note 1925658 is implemented and also note 1984512.
    -SS

  • EWA report generation in Solution Manager 7.1 SP12

    Hi Friends,
    I am done with Managed System Configuration..
    Now I need to generate EWA reports for the same.
    But I am getting some inputs that, EWA is automatically configured in Managed System Configuration itself.
    Can you guys suggest me accordingly..
    Thanks & Regards,
    Solman Starter

    Just start the workcenter and navigate here:
    Adding other systems can be done via SMSY ->
    You also have to check your SDCCN settings: There must be a Maintenance Package scheduled daily which uses your SolMan system.
    I suggest that you flag your RFC to SolMan as master:
    (Display/Change)
    (Set Master Solution Manager system)

  • Grey EWA report in solution manager

    I have migrated the server to another system with different SID, and then upgraded the system to solution Manager 4.0, with sp11,
    Oss Note 762696 has been followed, but I still have grey EWA report.
    any insight or suggestion ?
    thank you,
    Vedi

    Hi Ruediger,
    I already open SAP message, but I see their feedback not for a week now.
    Btw, according to that note(917558), I also have to put ST-SER in satellite system,
    which I never have to put there in the past.
    Could you confirm,
    here is my satellite system support package lists:
    SAP_ABA     700     0011     SAPKA70011     Cross-Application Component
    SAP_BASIS     700     0011     SAPKB70011     SAP Basis Component
    PI_BASIS     2005_1_700     0011     SAPKIPYJ7B     PI_BASIS 2005_1_700
    ST-PI     2005_1_700     0003     SAPKITLQI3     SAP Solution Tools Plug-In
    SAP_BW     700     0012     SAPKW70012     SAP NetWeaver BI 7.0
    LCAPPS     2005_700     0004     SAPKIBHD04     LCAPPS 2005_700 : Add-On Installation
    SAP_AP     700     0008     SAPKNA7008     SAP Application Platform 7.00
    EA-IPPE     400     0007     SAPKGPID07     SAP iPPE (EA-IPPE) 400
    SCM_BASIS     500     0008     SAPK-50008INSCMBASIS     SCM Basis 5.0
    SCM     500     0008     SAPKY50008     Supply Chain Management 5.0
    QIE     200     0004     SAPK-20004INQIE     Quality Inspection Engine 2.00
    BI_CONT     702     0001     SAPKIBIHP1     Business Intelligence Content
    CPRXRPM     400     0007     SAPK-40007INCPRXRPM     SAP xRPM/cProjects/cFolders 4.00 (ABAP)
    ST-A/PI     01I_SCM500     0000     -     Application Servicetools for SCM 500
    regards,
    vedi

  • How to set Solution Manager mail the EWA reports

    Could anyone suggest me how to setup email for getting EWA report

    Hi Bill,
           1. I would assume you have already configured Early Watch to report to Solution Manager.
            2. SCOT configuration done and e-mails can be sent out.
            If so,
           Go to --> Solution_Manager --> and Go to the solution --> Edit --> Automatic E-mail transmission
           and give the e-mail addresses there.
    Hope this helps,
    Regards,
    Krishna

  • EWA report change the frequency of the alert to monthly.

    Hi all
    In Solution manager we have early watch alert configured for weekly basis. But we need to change it to monthly basis.
    In solution manager, when I execute solution_manager, and EWA reports I get reports for every one week. Where can i change this frequency?
    Thanks
    subbu

    Hi Subbu,
    Check the sim file at https://service.sap.com/rkt-solman to configure the EWA reports.
    Hope this help
    Regards,
    Rajesh

  • Early watch Report issue in Solution Manager

    HI
    I have configured the EWA report for system in Solution Manager 4.0 and report is generating but the issue is in the report EWA for Solution following section remain empty 
    Workload and Performance Analysis
    Exception Analysis and Change Analysis
    and one more issue for our production system the EWA report status is showing Not Productive
    Thanks for your help
    Harish

    >
    Harish Kumar Jaiswal wrote:
    > I have configured the EWA report for system in Solution Manager 4.0 and report is generating but the issue is in the report EWA for Solution following section remain empty 
    >
    > Workload and Performance Analysis
    > Exception Analysis and Change Analysis
    >
    > and one more issue for our production system the EWA report status is showing Not Productive
    Please check, whether the managed system is well prepared.
    It requires add-ons ST-PI and ST-A/PI, data in workload statistics ST03N.
    Run RTCCTOOL via SE38 and check the results.
    See SAP Note 91488
    Ruediger

Maybe you are looking for