Solution Manager IT Performance Reporting..

We are using IT Performance reporting in the Solution MGR system and now I have a end user who would like to have access to these reports. We tried to give him CCMSBISUITE but he is still not able to see the report, he is getting tons of Authorization error on the Cube. Any help on how to grant access to CCMS BI suite in Solution MGR?
Edited by: Anup Sinha on Jun 18, 2009 2:19 AM

We are using IT Performance reporting in the Solution MGR system and now I have a end user who would like to have access to these reports. We tried to give him CCMSBISUITE but he is still not able to see the report, he is getting tons of Authorization error on the Cube. Any help on how to grant access to CCMS BI suite in Solution MGR?
Edited by: Anup Sinha on Jun 18, 2009 2:19 AM

Similar Messages

  • Does Solution Manager support Service Report for non-abap?

    Does Solution Manager support Service Report for non-abap?
    We can schedule and view reports for ABAP but for all the non-ABAP such as J2EE stack (PORTAL) we can not pull out a report.
    If the answer is yes please let me know where I can get the documentation of how to setup SLA for PORTAL or non-ABAP.
    I found a document on EWA non-abap but non for SLA.

    Hi
    actually i am in task of setting up ewa for portal.
    i had already done with abap components (ewa and sla)
    i stronly believe one of the pre-requiste to get sla is EWA.
    so i think if u can setup ewa for portal then you can get sla too.
    Regards,
    Vijay.

  • SAP Solution Manager - Enterprise Support Report bw cubes

    We are looking at the Infoproviders in Solution Manager BW and noticed the data for SAP Solution Manager - Enterprise Support Report.
    When we look at these cubes, we are particularly interested in the Software Component Versions.
    Unfortunately, all of these data cubes are empty.  Based on some discussions among our colleagues we are wondering if this data is only activated for customers that have the full Enterprise Support agreement in place with SAP?
    If that is the case, then so be it (we don't have that level of support).  However, if that is not the case, can anyone suggest a way to populate these cubes.
    thanks,
    Jeff Henke

    Hi,
    Solution Manager is a separate component and needs to be installed separately (not possible to install on top of R/3 Enterprise).
    You can order SAP Solution Manager Software from SAP or download from http://service.sap.com/swdc
    Solution manager is free from SAP and no additional license involved for it's customer for normal use.
    You can get more information on Solution manager from http://service.sap.com/solutionmanager
    btw: as far as I know for R/3 Enterprise you can still download patches via http://service.sap.com/swdc  without solution manager, For Netweaver 7.0 systems, use of Solution Manager (Maintenance Optimizer) became mandatory.
    Cheers !!
    Satya.
    PS: Pls reward points if the answer was helpful...Thx.

  • Solution Manager Roadmap Documentation report

    Hello All,
    We are sending the report Roadmap report RS_SOLAR_EVAL_ROAD_DOCU as an attachment to the document approval mail.
    In the attachment we are passing parameter as Project_id, Roadmap and the technical name for the document.
    But when the approver opens the attchment he is not able to get the document( he is not able to execute the report). The project id gets changed, the porject id we pass through link gets changed when the approver opens the report..
    Can you please let me know the solution the issue.
    Thanks,
    Bharat

    Hi,
    Roadmaps
    The Roadmaps are part of the SAP Solution Manager. They contain the standard SAP implementation methodology and cover the most important aspects and phases of a SAP implementation. The Roadmaps provide links to accelerators and tools which perform project tasks.
    http://help.sap.com/saphelp_sm40/helpdata/en/09/deff3adfdd2a75e10000000a11402f/frameset.htm
    How to create
    http://help.sap.com/saphelp_sm40/helpdata/en/09/deff3adfdd2a75e10000000a11402f/frameset.htm
    The RoadMap UI element displays the steps in a wizard. Each step is represented by a separate RoadMapStep Object or MultipleRoadMapStep. You can use various symbols to mark the start points and the end points of this UI element. Assigning the value more to the property startPointDesign or endPointDesign indicates to the user that there are other steps before the first visible step, or after the last visible step.
    The RoadMap UI element is used to display step by step workflows. This enables the application development to display small steps of a clearly defined work process.
    http://help.sap.com/saphelp_erp2005/helpdata/en/d6/719141c1d0ae5fe10000000a1550b0/frameset.htm
    Also check the following links,
    Roadmap and Business Blueprint
    How to use it for upgrade check markus ans here
    upgrade roadmap in solution manager 4.0
    A good pdf from sdn
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/48f4aa4c-0601-0010-4fb3-abc9042dac4b
    TCODE -RMMMAIN
    Please reward points for the same.
    Message was edited by:
            Prakhar Saxena
    Message was edited by:
            Prakhar Saxena

  • Solution manager for performance monitoring

    Hi,
    We have implemented solution manager  in our project.Can anyone tell me how is this useful for performance monitoring and how can we check expensive sql statements using this.
    It would be helpful if anyone can provide me some documentation on this.
    Thanks

    Hi
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce89c290-0201-0010-5985-dd64605111fd
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/3f99cc89-0701-0010-9c86-eae847ae6cd2
    refer above threads,
    Thanks
    Syf

  • Solution Manager : Realtime Performance Metrics and Alerts

    Hi
    How can I configure Solution Manager to get
    - Realtime Alerts
    - Performance Metrics every 5 minutes
    - Business Performance Metrics every 5 minutes
    Can I have all the above data in CSV / HTML/ XML format
    I have read the Solution Manager documentation, and it is cryptic for newbie starter
    Any help or pointers to someone who has done this before, will be very valuable.
    regards
    Raj

    How do you get CCMS Alerts and E2E, can you elaborate or point me the steps/docs....
    Thanks!

  • Solution Manager EWA - cannot create session in satellite system

    "Hi,
    I want to configure EWA self service using Solman 4.0. I succesfully did the following :
    a. Maintained SMSY and create the required trusted RFC connections from SM to satellite system. All connection and authorization passed in SM59. I used SAP_ALL/SDCCN_ALL role and assigned objects S_RFC*.
    b. Assigned the system to a logical system.
    c. Created the a new solution and activate "Solutions Monitoring > Earlywatch Alert"
    d. Activated and maintained required RFC in SDCCN in satallite system.
    My problem is that the create EWA alert request (Red Flag with a specific session number ) coulnd be pass to the satelitte system even though all the trusted RFC and authorization is set. When i execute the SESSION_REFRESH in the satellite system, the session is not created.
    Did I miss out any steps. Can any one share any help ?
    FYI, there is no connection to SAPOSS yet, so i did not manage to run RTCCTOOL completed, but i doubt this is required for EWA self service."
    I  have the same problem as Solution Manager EWA - cannot create session in satellite system
    tried all of solutions,  but it does not help... Created the CM (high) for SAP, but get 1 response for 1 week from them:(

    Dear Sapbcer,
    Have you tried the following option :
    Execute SMSY and from the Server entry Execute the "Read System Data Remote" option in change mode.
    Save the data captured and then try using Refresh Session Task from SDCCN of the satellite system. Do select the RFC for Solution Manager while performing this task.
    Hope this helps.
    Regards
    Amit

  • Solution Manager Testing Procedure

    hi everyone,
    i have configured solution manager for HR Reporting with the following t.codes
    solar_project_admin
    solar01
    stwb_2- where i am not able to find the test cases so i am not able to assign test packages to users and
    in t.code stwb_work when i test the report id doesnot see anything
    pl help me out
    Regards
    Utkarsh

    Hello. You have to create them by using NEW button.
    Bye

  • Solution Manager Integration with Tivoli and TSRM

    Hi,
    Has anyone done an integration of SAP Solution manager with Tivoli or TSRM. Solution Manager can perform the same capabilities of Tivoli or TSRM of monitoring and Service desk. However we want to use the best of both. I would appreciate if if someone can share thier thoughts on this.
    Regards
    Jasvinder

    Hi,
    Heres a good news for you.
    IBM Tivoli Service Request Manager version 7.1 software has now SAP-certified for integration with SAP Solution Manager 7.0 via the service desk interface scenario (SMG-SDI 4.0).
    [The News|http://www.cbronline.com/news/ibm_launches_new_service_to_help_automate_it_service_desk_operations_091013]
    To Inegrate refer [this guide.|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e3eeb4a8-0b01-0010-bd99-f4a700a49d32]
    Hope this will solve your problem.
    Feel free to revert back.
    -=-Ragu

  • How to access introscope enetrprise manager in solution manager

    Hello All,
    I have installed Introscope enterprise manager on Solution manager system  in windows successfully
    Now when I am executing  introscope enetrprise manager,just a command prompt opens and nothing happens.
    Any ideas?
    Also How can I access introscope enetrprise manager?are there any different ways to do it?
    Rohit

    Hi Rohit,
    If your Enterprise Manager is setup and running. You can access it via wily webview or Workstation.
    These are the standard GUIs avaialble for accessing data in EM.
    1) Webview is a webbased tool, and you can access it through browser - http://<hostname>:8081/webview
    2) Workstation- you have to install this in your PC and connect it to EM, Its more powerful tool than webview and you need to hava pre-requisite java version installed.
    but, by which mehtod you are trying to open EM??.. EM contains only logs.
    When you say setup is complete, is the EM's services running?..
    Also, while performing the Basic Configuration- You have to map the EM data to solution manager and perform the Diagnostics setup step. Then you can launch the webview from workcenter -Root cause Analysis.
    Hope this helps.
    Thanks,
    Jagan
    Edited by: jagadheeshan govindasamy on Sep 4, 2009 5:18 PM

  • User Manual for Solution Manager

    Friends,
    For a first time user of Solution Manager, is there documentation available to guide one through the rigour? Maybe a user manual on how to effectively harness Solution Manager during the project implementation cycle.
    Thanks and Regards,
    Sameer Aroskar

    you can also check this
    <a href="/people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager and Perform Testing using Solution Manager</a>
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce0b74e3-0601-0010-29a0-f2a6af98ef06">How SAP Solution Manager Can Smooth Your Next Upgrade Project</a>
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2a92c290-0201-0010-4b8f-a2aaaa3b822e">SAP Solution Manager - Test Drive SAP Solution Manager in an Implementation Project</a>
    I hope these will be fine for now
    Regards
    Milton

  • Checking SAP notes on Solution Manager

    Hi...
    I need to get a report with all the SAP notes applied in my ERP environment.
    If I use tx code snote, on ERP, I can find this, but I need something on Solution Manager, like a report...
    What can I do?!
    Thank's in advance.

    Hi,
    If you have already configured Diagnostics,(Solution manager Diagnostics - SMD and its a must for this activity), call Txn-> Solman_workcenter -> Root cause Analysis-> End to End Analysis->Select your system <SID>-> Change Analysis-> Select the Time Frame->goto notes ->Jump in-> to change Reporting ->Export the Result(if needed).
    Or
    Under RCA- Call system Analysis -> Change Reporting -> Select the instance and Get the suitable Extractor to get this :).
    Hope this helps.
    PS: If you have not configured Diagostics yet, Do configure it in first place, other wise, you don't have an option in solman and had to ge the individual reports from remote/satellite systems :(.
    Kindly revert for any issues.
    Thanks,
    Jagan

  • Solution Manager Change Management: Transport Request Administration

    Hi.
    We want to use the CHARM functionality of Solution Manager to improve our transport operations. We have several customers and expend´s a lot of time making tranports to different systems.
    I don want to activate CHARM completely. Which activities do i must perform, and which activities do i must leave ?
    Regards
    Alvaro

    Hi Avinash
    This is the Business Scenario: Our company is using SAP Solution Manager to perform monitoring and administration activities for over than 30 customers.
    Dayly we espend over 85% of the basis team time making transport for all of the customers. We decide to set some internal politics to bundle transports, stablishing several releases of them, at specific hours of the day. So we want to use SOLMAN`S change logistics instead of CHARM Scenario to control and improve this activitiy, releasing time to perform other activities.
    Regards
    Alvaro

  • Extrators for Solution Manager

    Guys,
    I need to know which Data Sources are used for objects bellow:
    SAP Solution Manager - Diagnostics (0SM_SMD)
    0SMD_VCA1
    0SMD_CA01
    0SMD_CA02
    0SMD_EA1D
    0SMD_EA1H
    0SMD_EA3D
    0SMD_EA3H
    0SMD_EA5D
    0SMD_EA5H
    0SMD_EA2D
    0SMD_EA2H
    0SMD_EA4D
    0SMD_EA4H
    0SMD_PE2D
    0SMD_PE2H
    0SMD_PERH
    0SMD_SB1S
    0SMD_PI2H
    0SMD_PI2D
    0SMD_ADCD
    0SMD_ADCH
    0SMD_SM1A
    SAP Solution Manager - Service Provider Reporting (0SM_SPR)
    0SPRDATB
    0SPR_BP
    0SPR_DATA
    0SPR_DATA
    0SPRLDATS
    0SPR_SYST
    SAP Solution Manager - Enterprise Support Report
    0SM_ESRAP
    0SM_ESRAS
    0SM_ESRCP
    0SM_ESRCS
    0SM_ESRBP
    0SM_ESRPR
    0SM_ESRCC
    0SM_ESRIS
    0SM_ESRMS
    0SM_ESROS
    0SM_ESRPD
    0SM_ESRPM
    0SM_ESRPS
    0SM_ESREW
    0SM_ESRRE
    0SM_ESRES
    0SM_ESRSC
    0SM_ESRSL
    0SM_ESRSG
    0SM_ESRCV
    0SM_ESRAV
    0SM_ESRST
    0SM_ESRTI
    0SM_ESRUD
    The system installed is SAP EHP 1 for SAP Solution Manager 7.0 SP23
    Sorry for size of the text
    I really need this information,
    help me please
    Att,
    Maicon Neves

    Hi Gaito,
    If your question is : "How many systems does a SolMan system landscape have ?" the answer depends on what functionnality you want to implement :
    - for the CRM based scenarii the recommandation is to use a two system system landscape
    - for the other ones, you can use a single system system landscape
    Hope this will help.
    Regards,
    Stéphane.

  • Early watch Report issue in Solution Manager

    HI
    I have configured the EWA report for system in Solution Manager 4.0 and report is generating but the issue is in the report EWA for Solution following section remain empty 
    Workload and Performance Analysis
    Exception Analysis and Change Analysis
    and one more issue for our production system the EWA report status is showing Not Productive
    Thanks for your help
    Harish

    >
    Harish Kumar Jaiswal wrote:
    > I have configured the EWA report for system in Solution Manager 4.0 and report is generating but the issue is in the report EWA for Solution following section remain empty 
    >
    > Workload and Performance Analysis
    > Exception Analysis and Change Analysis
    >
    > and one more issue for our production system the EWA report status is showing Not Productive
    Please check, whether the managed system is well prepared.
    It requires add-ons ST-PI and ST-A/PI, data in workload statistics ST03N.
    Run RTCCTOOL via SE38 and check the results.
    See SAP Note 91488
    Ruediger

Maybe you are looking for