Solution Manager Key SAP Netweaver 2004s SR2
Hi,
I am trying to install SAP Netweaver 2004s SR2,
Can anyone help me by generating the solution manger key for
SAP System ID: RVR
Central Instance Host: ravuri
Central Instance Number: 00
Thanks
ginjupalli
No This is against licensing. This thread needs to be blocked.
Similar Messages
-
Error in installing SAP Netweaver 2004s SR2 Developer Workplace
Hi,
I am installing "SAP Netweaver 2004s SR2 Developer Workplace". Got the below error :
CJS-30005 Cannot change SAPDrive for system JP1 from D: to C:: share saploc exists.
ERROR 2007-03-08 09:35:06
FCO-00011 The step createFirstSystemDirectories with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|6|0|createFirstSystemDirectories was executed with status ERROR .
Can anybody know the reason for this. and how to resolve this error.
Thanks.Was able to move to next step by removing all the registry entries related to previous intallation.
-
Error encountered with SAP Netweaver 2004S SR2 v7.0.9
Hi.. I am trying to install the SAP Netweaver 2004S SR2 v7.0.9 but i have met with this error:
Error:
FSL-01002 Unable to create account abc\SAPServiceJ2E. HRESULT=0x80005009
Error:
MUT-03025 Caught EsyException in Modulecall: ESAPinstException: error text underfined.
Error:
FCO-00011 The step createAccounts with step key
|NW_Workplace|ind|ind|ind|ind|NWERROR 2008-07-23 13:44:07
ERROR 2008-07-23 13:44:07
FCO-00011 The step createAccounts with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .
Please advise how to solve this error.Hi Pong,
I recommend you to read the [installation guides|https://websmp206.sap-ag.de/instguidesNW70] and then proceed with the installation...
for the problem on hand just try to restart your installation.
Regards,
Srihari -
SAP Netweaver 2004s SR2 Post Installation Guide
Hi Guys,
Plz send me SAP Netweaver 2004s SR2 Post Installation Guide.....
Email ID :- <email address removed by moderator>
Thanks in advance.
Regards,
Suresh.KDear Suresh ,
You can download from https://websmp102.sap-ag.de/instguides OR https://websmp102.sap-ag.de/installnw70
OR Directly from :
https://websmp102.sap-ag.de/~sapidb/011000358700004073122006E
Regards ,
Santosh -
Installing SAP NetWeaver 2004s SR2 (SP9)
Has anyone installed the SAP NetWeaver 2004s SR2 (SP9)
which is in the download section. I tried to install but its throwing exceptions after I gave the j2eadmin user and SAPService user. Has anyone else experienced this problem? The error is something like invalid user exception. I thought i can give any name there but its not accepting any names there.
I'm installing on Windows XP professional Service Pack 2.
AshaKrishna,
That note doesnt apply to me. And I didnt find any thing in PI Installtion guide.
So far i was not able to install successfully any of the netweaver systems given in the downloaded section. Not sure what am I missing.
Asha -
Sap netweaver 2004s sr2 patches
Hi Experts
I am Installing netweaver 2004s sr2, for BI
Can u help out wat r the pacthes required and help where i can find them in marketplace
Actaully it is for testing purpose and my BI production is netweaver 7.0 sr3
please help me out
thanks
deepakHi
You can upgrade your BI_content patch level
www.service.sap.com/swdc>Downloads>Support packages and patches-->
My Company's Application Components" SAP NETWEAVER" SAP NETWEAVER 7.0-->select BI content for Netweaver
If you want you can also upgrade your stack level
Let me know if needed more information
Regards
Uday -
Solution manager 4.0and Netweaver 2004s - same "SAP system ID???
Hi,
Can we install <b>solution manager 4.0</b> and <b>Netweaver 2004s</b> on same <b><u>AIX</u></b> machine with same <b>"SAP system ID"</b> ?
ThanksNo, that's not a good idea because the system ID is part of the file system. And the system ID is used to mark your systems unique.
Best regards
Rainer -
Error while installing SAP NetWeaver 2004s SR2
Hi,
We are installing SAP NW2004s SR2 on Linux/Oracle.
In the 18th step of "Execute Service"("Create Secure Store"), we are getting an error
<i>CJS 30050 - Cannot create the secure store. See output of log file SecureStoreCreate.log.
Exception in thread "main" - java.lang.NoClassDefFoundError: com/sap/engine/offline/OfflineToolStart</i>
Any help?
Thanks a lot in advance
regards,
SujeshHi,
Do attach the required log files and also see that the LD_LIBRARY_PATH has been properly set.
regards and reward if helpful -
Solution manager For SAP PI monitoring
Hello All,
Can you please explain me how to use Solution manager in SAP Netweaver PI monitoring ?
Please point me to any diagrams that can make me understand better.
Thanks & Regards,
SitaHi
Please check the below guides
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70cd1603-6761-2b10-f0bf-8dd799ef7263?quicklink=index&overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70cd1603-6761-2b10-f0bf-8dd799ef7263?quicklink=index&overridelayout=true]
[Monitoring SAP PI 7.1|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d05c14c3-34af-2b10-a1b1-fa2a39e0d2ae?quicklink=index&overridelayout=true]
and more specific INTERFACE MONITORING SET UP GUIDE under
https://service.sap.com/bpm --> Media Library --> Technical Information this gives details about how to use PI monitoring with Business Process Monitoring and explains the automated alert monitoring of all interface technologies like IDOC, qRFC, tRFC.....
Please check
Thanks
Jansi -
What is NetWeaver 2004s SR2 ?
Hi,
The term "SAP NetWeaver 2004s SR2" ,
a.) 2004s , what does the "s" stand for ?
b.) SR2 , what does it mean ?
c.) if we were to login to a system, how to proof or where to check that the system is actually has netweaver ?
Comment and advice will be appreciated.
Thanks.
Regards,
Kenta.) 2004s , what does the "s" stand for ?
S stands for the extended release of NW 2004 release. Since it was confusing, SAP now has removed the old convention and now NW 2004's is called as NW 7.0 Release.
b.) SR2 , what does it mean ?
SR2 means : Service Release 2, which includes all the SP's of NW. If you want to apply sp's into your system, you can directly apply service release packs, instead of applying lot of Support packages indivually, which is time consuming and bit tedious.
Now NW SR3 is available in market. SR3 means - it includes all the support packages of NW till SP11.
c.) if we were to login to a system, how to proof or where to check that the system is actually has netweaver ?
go to : System -> Status -> Component information -> Release for 2004s or NW 7.0
Proof: If it contains: SAP_BASIS, SAP_ABA, SAP_BW and PI_BASIS 700 release, then u can say that
NW 7.0 system is there in your system.
Hope it wil clear your doubts.
Regards,
Mahesh
PS: Close the thread, so that it wil be helpful for others to track later. -
Implementierung des SAP Solution Managers 4.0 SR2 über SAP Netweaver 2004s
Hallo Leute,
finde es gut das man hier in forum sich gegenseitig helfen kann.
Bräuchte unbedingt ein Installations Leitfaden für die Implementierung des SAP Solution Managers 4.0 SR2 über SAP Netweaver 2004s
würde mich auf eure Antworten und Lösungsvorschläge freuen.
MfG
AliHi,
For how long the installation process has been running. Check the following.
1. The virtual memory page size that you have assigned.
2. The hard disk free space.
3. The Virtual memory should be optimized size, should not be larger than the free space available.
These are performance optimization settings.
I guess the installation would take around ten hours, I am not sure.
But one thing is sure <b>SAP</b> is not that bad to get aborted abruptly.
Keep Patience while installing. Before that take care that your system satisfies, requirements.
Hope I was clear. Feel free to get back, incase you face any problem.
--Thanks and Regards,
Ragu
ERP,
Suzlon Energy Limted, Pune
Extn: 2638
+919370675797
I have no limits for others sky is only a reason -
Solution Manager Key for EP '04 - EP 2004s
Well, we just started the upgrade of our EP '04 SP18 to EP 2004s ST11. However, the PREPARE is rejecting the Solution Manager Key (generated in SSM 3.2). We came across OSS Note 811923 which says:
For SAP ERP 2004 (SAP ECC 5.0), you require SAP Solution Manager 3.1 with Support Package 20, or SAP Solution Manager 3.2 with Support Package 4. You can also use SAP Solution Manager 4.0.
For products of SAP Business Suite 2005 (including SAP NetWeaver 2004s), you require at least SAP Solution Manager 4.0 with Support Package 9.
I guess we are hosed up until we upgrade our Sap Solution Manager system to 4.0. Does anyone know a work-around for this?
thanks in advance,
Steven McElwee, Duke UniversityHi Steven,
Not sure of any workaround for it but you have a couple of options;
1) Install a new solution manager 4.0 as a temporary work around to get a valid key
2) Raise an OSS message to request support to assist you.
Solution manager is really now a required utility system for your core apps. Even after you have the migration key it is likely that post migration you will have issues that may require patches from the service market place. As of April 2nd this year you need solution manager (4.0) Diagnostics for this.
For these reasons I would urge you to move to Solution Manager 4.0 sooner rather than later.
Cheers
Dan -
Hi,
Can any one please create SAP solution manager key as early as possible.
Instance Name : PAB
Instance Number : 00
Host: laks21
Upgrade SAP NW 2004S
Thanks in advance...
Regards
BenHi Ben,
Creating a key is not a problem but it will be good if you install a Solution Manager 4.0 BOX at your place, bcoz for N/W 04 and above you will need a solution specific key for each solution.
Thanks and regards
Manas -
Install License Key for SAP NetWeaver 2004s ABAP trial Edition.
Hello.
I have two installations of the SAP NetWeaver 2004s ABAP trial Edition (on desktop and laptop). After the expiration of the original 30 days license; now I need to install the extended License (90 days). I am using SLICESE transaction from SAP* user account to install the new license. I have got the "License Key" from SAP website. However, <b>the installation of the new License Key fails to complete successfully</b> (it fails to add the new license key) and ends with an error prompt. This problem is happening on both systems! <b>Has anyone experienced such problem?</b> What did you do to fix it?
Note: no errors in typing in the new Key, as I used the copy and paste!
Thank you very much for your help.
HameedRich,
Thanks again for your help. I found out that if you try to install the new license key (first time) with any error (such as wrong expiration date), it will fail as "invalid key", naturally. However, the subsequent attempts also continues to fail despite the fact that the correction are made. the only way I could fix this was to stop and restart the SAP Application server and make sure that the first attempt has typos. <b>It seems to me that once an error flag is set, it is not removed unless the server is restarted.</b> well, the problem is fixed now and thank you for your help.
Hameed -
License key for "SAP NetWeaver 2004 - Trial Version on Linux"
I want to evaluate the software u201E SAP NetWeaver 2004 - Trial Version on Linuxu201C and i need a license-key for test drive.
Unfortunately I can not find a page where I can request a valid license for our test. I only find license keys for the u201E SAP NetWeaver 2004s - Trial Version on Linuxu201C.
Please can You help me?Hello
yu can download abap trail veriosn from this link
but u have to create a/c in dsn.sap.com
link is as below
https://www.sdn.sap.com/irj/sdn/nw-downloads
1)SAP NetWeaver 7.01 - ABAP Trial Version
2)SAP NetWeaver 7.0 (2004s) - Trial Version on Linux SAP Evaluation Software
3)SAP NetWeaver 2004 - Trial Version on Linux SAP Evaluation Software
that will hepl out 100 %
Regards
Jayesh
Maybe you are looking for
-
How do I change my printer settings programmatically ?
How do I open a print menu, to change the printer, the orientation and the number of pages to be printed out during the execution of a LabVIEW program ?
-
Problem with Tomcat 5.0
Hi there, I have a .java file inside \WEB-INF\classes\ directory. This .java file has a "public static void main" method that calls al the other methods in the class. I want to know if its possible for me to create an JSP file to call this .java file
-
Watermarks not printing properly.
Created a Watermark on PDF using office Vista computer with Acrobat 8. After creating and inserting a text watermark, the on screen images of the pages show the watermark correctly and the watermarked pages print correctly. On that same office PC, u
-
HT4085 how do i get my icons as if they are in a globe
how do i set my icons as if they are in a globe?
-
Hi, I am using PNPCE logical data base in my prog. For this I defined the following. Nodes: Peras. Tables: Pernr. Infotypes: 0002. Is it mandatory to use Tables: Pernr. (Without this selection-screen is not coming)? Also the statement Infotypes is Ob