Solution Manager MMC Problems

HI Gurus
I have installed SAP Solution Manager, Installation successfull..
I have stopped and started the SAP MMC.. give errors in
kindly look below the developer trace i have pasted
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        S40
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    75
intno      20050900
make:      multithreaded, Unicode, optimized
pid        4060
Thu Jun 05 12:25:08 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 4060) [dpxxdisp.c   1237]
     shared lib "dw_xml.dll" version 75 successfully loaded
     shared lib "dw_xtc.dll" version 75 successfully loaded
     shared lib "dw_stl.dll" version 75 successfully loaded
     shared lib "dw_gui.dll" version 75 successfully loaded
     shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Thu Jun 05 12:25:12 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SOLMON_S40_01                           <
DpShMCreate: sizeof(wp_adm)          12672     (1408)
DpShMCreate: sizeof(tm_adm)          3994272     (19872)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1440)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 07790040, size: 4647736)
DpShMCreate: allocated sys_adm at 07790040
DpShMCreate: allocated wp_adm at 07791E40
DpShMCreate: allocated tm_adm_list at 07794FC0
DpShMCreate: allocated tm_adm at 07794FF0
DpShMCreate: allocated wp_ca_adm at 07B64290
DpShMCreate: allocated appc_ca_adm at 07B6A050
DpShMCreate: allocated comm_adm at 07B6BF90
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07BECE50
DpShMCreate: allocated gw_adm at 07BECE90
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 07BECEC0
DpShMCreate: allocated wall_adm at 07BECEC8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
ERROR => DpForkExec: CreateProcess (123: Unknown error) [dpntdisp.c   1441]
***LOG Q0I=> DpForkExec, CreateProcess ( CreateProcess123) [dpntdisp.c   1443]
Memory diagnostic                                 *
Systeminformation
Processor-Typ             : Intel unknown
Processor-Count           : 8
Operating System          : NT 5.2, Build 3790
Service Pack              : Service Pack 2
NT Pagefile Informations
Config. minimum size      : 23054336 K
Config. maximum size      : 25149440 K
Avail. maximum size      : 25149440 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
2095104 K
4190208 K
4190208 K
2095104 K
2
d:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
3
e:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
4
f:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
5
g:\pagefile.sys
8388608 K
8388608 K
8388608 K
8372224 K
NT Task Manager Informations
Total Handles             :        0
Total Threads             :        0
Total Processes           :        0
Commit Charge Total       : 1682380 K
Commit Charge Limit       : 24979372 K
Commit Charge Peak        : 2989120 K
Phys.Memory Total         :       54 K
Phys.Memory Available     : 88721880 K
File Cache                : 1946181504 K
Kernel Memory Total       : 2084091208 K
Kernel Memory Paged       :        0 K
Kernel Memory Nonpaged    : 88721908 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 1082640 K
Private Pages             :        0 K
Total heap size           :    13970 K
Virtual memory regions    :        0 K
Uncommitted heap memory   :     7124 K
Allocated heap memory     :     6729 K
Moveable heap memory      :        0 K
DDE shared heap memory    :        0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
3616
msg_server.EXE
[MS] S40_00
8132 K
8132 K
10272 K
10272 K
2
3624
enserver.EXE
[**] S40_00
13764 K
13764 K
54392 K
54392 K
3
612
sapstartsrv.exe
16228 K
16264 K
18432 K
18472 K
4
4052
msg_server.EXE
[MS] S40_01
8464 K
8464 K
10660 K
10660 K
2
4060
disp+work.EXE
34084 K
34148 K
65916 K
66020 K
8
4072
igswd.EXE
[**] S40_01
2960 K
3192 K
1488 K
1756 K
0
1976
igsmux.exe
12092 K
12092 K
13264 K
13264 K
2
2024
igspw.exe
2828 K
2828 K
2420 K
2420 K
0
2068
igspw.exe
2828 K
2828 K
2420 K
2420 K
0
3580
gwrd.EXE
3208 K
3208 K
5924 K
5924 K
0
3160
icman.EXE
3452 K
3452 K
6652 K
6652 K
0
Sum
108040 K
191840 K
DpJ2eeStart: j2ee state = INIT
ERROR => DpProcCreate: DpJ2eeStart failed [dpxxdisp.c   12251]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1623]
***LOG Q0K=> DpMsAttach, mscon ( SOLMON) [dpxxdisp.c   11586]
DpStartStopMsg: send start message (myname is >SOLMON_S40_01                           <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Thu Jun 05 12:25:15 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
can anyone help me in this
regards

Hi Ronald,
It seems to me that ABAP is running but J2EE startup framework have some problems.
Can you confirm that? What WP's can you see? Can you observe the windows processes
on startup (most suitable with ProcessExplorer from [Sysinternals|http://technet.microsoft.com/de-de/sysinternals/default(en-us).aspx]). What happen on startup?
Additionally can you update the kernel? Patchlevel 75 is a little bit old, the most current is ~161.
Regards
Holger

Similar Messages

Solution Manager MMC DISPATCHER(Disp+Work.exe) STOPPED

Hi All,
My Solution manager dispacter stopped, also unable to open SQL server as well. Before I have received an SQL error message unable to connect table,while log on to the system. so I restarted the MMC and server.
Regards
Edited by: Ravi Mahalingam on Oct 31, 2011 9:59 AM

Hi Varun,
All SQL services are running ,but unable to connect SQL as well, using windows authentication, but " Cannot open user default database. Login failed". If solution manager license expired can be the chance? please find the below dev trace........................................................................................................................
sysno      00
sid        XSM
systemid   562 (PC with Windows NT)
relno      7010
patchlevel 0
patchno    69
intno      20020600
make:      multithreaded, Unicode, 64 bit, optimized
pid        4924
Sun Oct 30 14:53:14 2011
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4924) [dpxxdisp.c   1287]
     shared lib "dw_xml.dll" version 69 successfully loaded
     shared lib "dw_xtc.dll" version 69 successfully loaded
     shared lib "dw_stl.dll" version 69 successfully loaded
     shared lib "dw_gui.dll" version 69 successfully loaded
     shared lib "dw_mdm.dll" version 69 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sun Oct 30 14:53:19 2011
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0157.qqq.nxst) took 5 seconds
Sun Oct 30 14:53:27 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 8 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5534]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >XEMSOLMAN_XSM_00                        <
DpShMCreate: sizeof(wp_adm)          29792     (1752)
DpShMCreate: sizeof(tm_adm)          5912704     (29416)
DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000007E00050, size: 6614144)
DpShMCreate: allocated sys_adm at 0000000007E00050
DpShMCreate: allocated wp_adm at 0000000007E02270
DpShMCreate: allocated tm_adm_list at 0000000007E096D0
DpShMCreate: allocated tm_adm at 0000000007E09730
DpShMCreate: allocated wp_ca_adm at 00000000083ACFB0
DpShMCreate: allocated appc_ca_adm at 00000000083B2DB0
DpShMCreate: allocated comm_adm at 00000000083B4CF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000843B980
DpShMCreate: allocated gw_adm at 000000000843BA00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000843BA30
DpShMCreate: allocated wall_adm at 000000000843BA40
MBUF state OFF
DpCommInitTable: init table for 500 entries
Sun Oct 30 14:53:28 2011
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 8179MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 8180MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2044 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
Sun Oct 30 14:53:29 2011
J2EE server info
start = TRUE
state = STARTED
pid = 3760
argv[0] = E:\usr\sap\XSM\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\XSM\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\XSM\SYS\profile\XSM_DVEBMGS00_XEMSOLMAN
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=XSM
argv[7] = -DSAPMYNAME=XEMSOLMAN_XSM_00
argv[8] = -DSAPPROFILE=E:\usr\sap\XSM\SYS\profile\XSM_DVEBMGS00_XEMSOLMAN
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1682]
***LOG Q0K=> DpMsAttach, mscon ( XEMSOLMAN) [dpxxdisp.c   12593]
DpStartStopMsg: send start message (myname is >XEMSOLMAN_XSM_00                        <)
DpStartStopMsg: start msg sent
Sun Oct 30 14:53:30 2011
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1048]
DpMsgAdmin: Set patchno for this platform to 69
Release check o.K.
Sun Oct 30 14:53:37 2011
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4436]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 920
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:49221) [nixxi.cpp    4436]
ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c   1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Oct 30 14:54:09 2011
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=933
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Oct 30 14:54:19 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Edited by: Ravi Mahalingam on Oct 31, 2011 12:31 PM

Solution Manager Workflow problem

Hi,
I am triggerring a workflow for support message creation in transaction crmd_bus2000116 in solution manager. It been assigned to a particular agents by using a customized workflow . I am facing two problems...
1. The person to whom I am assigning the workitem, if he simply displays it , then workitem is getting deleted.But I need to be there for particular period of time and then if he is not changed it then only it should get deleted from his SAP Inbox.
2. If he changes means I should trigger an another event , which will call the same workflow in the next event, In this case how can I check the event getting called .....currently I am using an status flag to do so....
Cheers,
Sabari.

Sabari,
1. You should use an asynchronous task with the Changed event as the terminating event to create the WI. The WI will then stay in the inbox until the changed event is triggered. You will have to use modeled deadlines in order to remove the WI or end the workflow after a specified time. You can look in the online documentation for more information on terminating events and modeled deadlines.
2) There is no need to check for the changed event. You can have the next step follow after the first step ends with the terminating event.
Cheers,
Ramki.

Solution Manager Diagnostics Problem

Hi,
SMD is complaining about our Solutions being outdated, and it requests to Publish them, where can we perform that ?
For example in the Landscape Management part, it says : solmanstatus=Outdated.
Thank you for your help,
Jerome Morignot

If any changes were made to landscape(sld, smsy) then perform the setup for managed systems again and then reload the solution.
If changes were not made follow the above note

Configuring Solution Manager: Alternative Role to SAP_ALL

This is a general question regarding configuring Solution Manager and note 834534. I am configuring Solution Manager 7.0 at a client site. The main components that I am configuring are on the Monitoring and Operations side; for example, System Monitoring, Service Desk, Issue Management, and Change Management for Maintenance Optimizer. CHaRM will follow later on. Additionally, the client would like to use the project side of Solution Manager.
When I took training for Solution Manager from SAP, the SAP instructor advised the class to have SAP_ALL when configuring Solution Manager The problem I am having is that the client will not issue me SAP_ALL in the Solution Manager instance, regardless of the recommendation in note 834534. I can understand the client's reluctance to issue SAP_ALL, even though Solution Manager is not a financial system in of itself, however, I have found that I am constantly having to ask for authorizations as I step through the wizards and the Scenario-specific settings. When I run into issues which require further investigation by running transactions to check certain settings that are not specifically tiedd to a wizard or scenario-specific setting transaction, I run into further delays as I ask for additional authorizations to troubleshoot issues.
We have implemented the roles and assigned them to my ID in Solution Manager as outlined by the SAP Solution Manager Security Guide to the fullest extent possible; and I have been issued "Basis Roles" that the client issues to their Basis team. Regardless of these actions, I still run into authorization issues.
My question is, apart from the SAP Solution Manager Security Guides recommendations (which does not mention SAP_ALL), is there a role being developed, or has been developed that can be assigned to the Solution Manager configurator in lieu of SAP_ALL (as per note 834534)? I would think that this issue has been raised before, particularly since many companies have implemented SOX controls and are skittish about issuing SAP_ALL.
Your feedback is most appreciated.

Thanks for the reply, Nesimi.
While I appreciate that you do not use SAP_ALL, is that the case when you are configuring a brand new, clean system? Are you using the Configuration Wizards with out SAP_ALL? I ask this because when I ran the first configuration wizard, one of the steps is to create a "configuration user", which creates a user with SAP_ALL. However, I cannot use that wizard generated user ID because it has the role SAP_ALL.
In general, I am operating on 3 sources of information that says I need SAP_ALL to configure the system (not necessarily to operate it):
1. An SAP Instructor for the Solution Manager Operations and Monitoring Class
2. The IMG Activity "Create Configuration User" documenation in SPRO
3. Note 834534
I will review the english version of the link http://help.sap.com/saphelp_smehp1/helpdata/de/40/8ac473d40943ddb23def12bdb33437/frameset.htm that you have thoughtfully provided.
With respect to note 123640, I am not sure if that solves my problem or answers the fundemental question that I have in that given the 3 sources I quoted above. It seems to me that SAP's approach in indicating clearly that they prefer that the configuration user should have SAP_ALL is flawed given today's corporate governence policies. Clearly this recommendation is only for the initial configuration, and SAP_ALL can be taken away and replaced by the roles and recommendations in the SolMan security guide; to maintain Solution Manager. But when it comes down to the question "what do you need to configure Solution Manager, because we won't give you SAP_ALL", I am hard pressed to give an answer despite literally spending hundreds of hours researching "documenation" which does not give clear cut answers. I think SAP needs to address this issue instead of taking the easy way out and saying you need "SAP_ALL" as illustrated in the 3 sources of readily available information cited above.

Solution Manager on Linux x86_64 installation problem

I try to install Solution Manager 4.0 on Linux X86_64 platform. Unfortunately i receive error "the JDK installed in directory /usr/lib/java does not support the 64 bit data model". And there is no J2SDK for Suse linux x86_64 (or at least i can't find it. Please help!!!

OK. I solved the problem by using IBM Java. Also there is an SUSE version of SUN Java 1.4.2 for 64 bit systems.

Problem with BI activation in Solution Manager

Hello SAP experts.
I have problem with BI Content Activation in Solution Manager solman_workcenter - test management - settings - Bi reporting
The customizing in client 010 is ok. I have BW client 001. RFC connections
are ok. After activation of BW content in workcenter only new job in sm37
has been planned but the button Status Report has not appeared. I installed
newest add-on SAPK-70405INBICONT.
Detailed description:
After customizing in:
SPRO-Basic Data-BW Setup
and
SPRO-Scenario-Specific Settings - Test Management - BW-based Reporting.
The Activation of BW content in transaction solman_workcenter - Test
Management - Settings - BI Reporting Settings the message appears:
"Test Workbench Reporting - BI Content not active", after pressing save:"Settings of Test Workbench Reporting saved"
and
"Activation of BI Content for Test Workbench Reporting started".
In test evaluation the button Status report doesnt show. After repeated
activation appears the same message as in beginning: Test Workbench
Reporting - BI Content not active.
Thank you

Hi Marian,
Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
Content Activation Log
Log for Setup ID 20100819135323
20100819 135323[ERROR ]: Current Status: ERROR
20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
20100819 135323[ERROR ]: Prerequisites check failed
20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
Regards,
Rue.

Problem with Aris and Solution Manager

Hi,
I'm trying to synchronize Aris and SAP Solution Manager.
I'm doing installation and configuration following Administration Guide
chap. 7 from Aris for Netweaver guide, but, I have a problem when I
try to transfer projects from Aris to SolMan.
In the main ARIS menu from ARIS Business Architecture for SAP NetWeaver>
Aris Network>LOCAL>Synchronization>Maingroup, a SAPLogon screen appears
to logon to SolMan system, ask for Client, User and PWD.
I put the same user/pwd that I use to logon to SolMan, but ARIS cannot
connect to, an error message appears "User or password incorrect".
Does anyone have idea about this problem??
Thanks

Mariana,
try changing your password to all CAPS in Solman.
regards,
Jason

Problem while starting solution manager.

Hi all,
i have installed solution manager on windows2003. when i tried to start the solution manager dispatcher is getting stopped and workprocess in abap process list is getting ended status of disp+work.exe is j2ee info unavailable.how can i resolve this issue.
here i am giving the develpoer trace
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        SO1
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    52
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2584
Sun Feb 21 12:26:02 2010
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2584) [dpxxdisp.c   1231]
     shared lib "dw_xml.dll" version 52 successfully loaded
     shared lib "dw_xtc.dll" version 52 successfully loaded
     shared lib "dw_stl.dll" version 52 successfully loaded
Sun Feb 21 12:26:03 2010
     shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun Feb 21 12:26:07 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >wipro_SO1_01                            <
DpShMCreate: sizeof(wp_adm)          12672     (1408)
DpShMCreate: sizeof(tm_adm)          3954072     (19672)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1452)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05D00040, size: 4607512)
DpShMCreate: allocated sys_adm at 05D00040
DpShMCreate: allocated wp_adm at 05D01E28
DpShMCreate: allocated tm_adm_list at 05D04FA8
DpShMCreate: allocated tm_adm at 05D04FD8
DpShMCreate: allocated wp_ca_adm at 060CA570
DpShMCreate: allocated appc_ca_adm at 060D0330
DpShMCreate: allocated comm_adm at 060D2270
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06153130
DpShMCreate: allocated gw_adm at 06153170
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 061531A0
DpShMCreate: allocated wall_adm at 061531A8
Sun Feb 21 12:26:08 2010
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Sun Feb 21 12:26:09 2010
J2EE server info
start = TRUE
state = STARTED
pid = 2408
argv[0] = E:\usr\sap\SO1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = E:\usr\sap\SO1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\SO1\SYS\profile\SO1_DVEBMGS01_wipro
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2190
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=SO1
argv[7] = -DSAPMYNAME=wipro_SO1_01
argv[8] = -DSAPPROFILE=E:\usr\sap\SO1\SYS\profile\SO1_DVEBMGS01_wipro
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1617]
***LOG Q0K=> DpMsAttach, mscon ( wipro) [dpxxdisp.c   11414]
DpStartStopMsg: send start message (myname is >wipro_SO1_01                            <)
DpStartStopMsg: start msg sent
Sun Feb 21 12:26:10 2010
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
DpJ2eeLogin: j2ee state = CONNECTED
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Sun Feb 21 12:26:21 2010
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 5 / sock 1532
     (SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2204) [nixxi.cpp    4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2408)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun Feb 21 12:26:49 2010
ERROR => W0 (pid 2340) died [dpxxdisp.c   14021]
ERROR => W1 (pid 972) died [dpxxdisp.c   14021]
ERROR => W2 (pid 2336) died [dpxxdisp.c   14021]
ERROR => W3 (pid 2776) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 2124) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 1900) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 672) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W7 (pid 2772) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W8 (pid 2684) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thanks&Regards
Dinesh

Hi Dinesh,
On 2nd thoughts, I think the problem is to do with the DNS.
I found this problem in your log that you posted:
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS
check your c:\windows\system32\drivers\etc\hosts , it should contain your hostname (name of your windows box) and the FQDN if you have a domain install.
Also ensure you have defined your SAPGLOBALHOST in your startup profiles.
Hope that helps.
Regards,
Siddhesh

Oracle 10g 2 problem install on Solution manager

Hi,
I'm installing Sap Solution Manager 4 on Red Hat Enterprise
Linux ES release 4 (Nahant Update 5) with Oracle 10g 10.2.0.1.0.
I have an Oracle error message :
/oracle/SM1/102_64/lib32//libnls10.a(lxecg2e.o)(.text+0x681): In function `lxecg2e':
: undefined reference to `ldxdtd'
There are a lot of message of this type with different end of message :
/oracle/SM1/102_64/lib32//libnls10.a(lxecg2i.o)(.text+0xf0): In function `lxecg2i':
: undefined reference to `ldxnbeg'
But it's always a problem with libnls10.a(lxecg2i.o)....
Someone have alreaday had this problem before?
Thx for all.

you should install 10.2.0.2 with latest patches.
please read Note 871735 - Current patch set for Oracle 10.2.0

Problem installing SOLUTION MANAGER in db2

Dear consultans;
I have a problem installing solution manager in db2.
In phase 'Import ABAP' the sapinst shows the following message:
Execution of the command "/usr/sap/SOL/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
ERROR      2008-08-26 11:19:30.422
           CJSlibModule::writeError_impl()
CJS-30023 Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.e
xe.log.
ERROR      2008-08-26 11:19:30.748 [sixxcstepexecute.cpp:951]
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Cr
eateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnecti
on was executed with status ERROR ( Last error reported by the step :Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exi
ts with error code 2. For details see log file(s) R3load.exe.log.).
The file R3load.exe.log show the following..
(root)sidtsmp:/install/instalacion> more R3load.exe.log
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
And if I do the following sentence it's finished ok
sidtsmp:db2sol 6> db2 connect to SOL
   Database Connection Information
Database server        = DB2/AIX64 9.1.4
SQL authorization ID   = DB2SOL
Local database alias   = SOL
(root)sidtsmp:/sapmnt/SOL/exe> su - db2sol
sidtsmp:db2sol 1> db2 connect to SOL user sapsol
Enter current password for sapsol:
   Database Connection Information
Database server        = DB2/AIX64 9.1.4
SQL authorization ID   = SAPSOL
Local database alias   = SOL
I reboot the server and now the sentence finished wrong.
sidtsmp:db2sol 8> db2 connect to SOL user sapsol
Enter current password for sapsol:
SQL30082N Security processing failed with reason "15" ("PROCESSING FAILURE").
SQLSTATE=08001
sidtsmp:db2sol 9>
Any suggestion?
Best regards,
Julene

Hi Julene.
Just one suggestion really,....
post the question on the Solution Manager forum
Chrs, M

RFC problem (CTS with Solution Manager)

Hi everybody,
I'm configuring a transport landscape with Solman.
For demo purpose I created 3 clients in a Sandbox system (SBX), which should function like a 3-system-landscape. I created a transport domain in Solman (SM1) and added SBX into the domain (SM1 and SBX are not in one transport directory). The transport routes are configured from SBX:810 - SBX:820 - SBX:830. After I distributed the configuration, I can also see routes in SBX.
I also used SOLMAN_SETUP to generate the RFC connections to every client (READ and TMW), also to SBX:000 and SM1:000.
Then I created a Solman Project and wanted to configure the IMG-Project in "System Landscape" tab (so that I can use this project for CTS). But as I tried to create the IMG, I got an error:
S:No RFC authorization:000 function module SPROJECT_CREATE_NO_DIA_R.
Message no. No RFC authorization000
Can somebody give me a hint?
Another problem is, I created a customizing request and a workbench request in SBX:810, I can see them in SE09 in SBX, but in SM1 I cannot see them! I also don't understand here...
I'd preciate any help from you!

Hello Charlie
Seeing all the STMS queus in Solution Manager is no problem. The way we have set it up is that the Solution Manager is the TMS domain controller and all systems are included into the TMS domain of the Solution Manager.
That makes the STMS queues of the managed SAP systems visible in transaction STMS.
About two years ago SAP showed plans for a new layer for CTS called CCTS (central CTS) which would only be available on Solution Manager and it's purpose would be even more features and central transport request management. However CCTS has vanished from the radar. It's no longer mentioned and at SAP TechED 2011 it was nowhere to be found.
Using CHARM the idea is also that person X creates a request which then a developer Y can use to insert objects into. Why? Segregation of duties is the answer. Creating a request is always done in the managed SAP system, using RFC you will jump to SE01 or another respective transaction to create the request.
QGM and CHARM add another layer (control) on top of CTS, that's how you should visualize it. If you look up presentations on CCTS you will be able to visualy see that.
You can read up on CHARM on https://service.sap.com/solutionmanager
There are also interesting SAPPress books available
The customizing option is to be found in SE09 I believe but I'll check tomorrow and update this reply because I'm on my iPad now without SAP system available.
The obligation is then you must have an IMG_Project in your managed SAP system that has been CTS enabled. Creating such an img project is easy, transaction spro_admin, fill in title, save, go to tab transport request (or something) and enable the project for CTS.
Kind regards
Tom

SAP MMC Java with Solution Manager

Dear experts,
i have installed a SAP Solution Manager 7.0 in WAS ABAP + JAVA in Windows Server 2003 SR2 Enterprise Edition 64 bits + MS SQL 2005.
I try to connect to the SAP MMC in Java (http://localhost:52113/) but i have a message error:
Your browser is completely ignoring the <APPLET> tag!
I already installed the jdk for SAP and x64 (J2sdk version 1.4.2.17 version x64) on http://java.sun.com/j2se/1.4.2/SAPsite/download.html
How can i access?
Thank you in advance
Best regards.
Pascal.

Hello,
i found my error: i have installed a jdk but didn't a jre...
Sorry for this thread.
Thank you.
Pascal.

Big Problem With Solution Manager EHP1 ?

Dear all,
I have already installed SAP Solution Manager EHP1, after the installation sucessfuly. I check the function: Project Administration ( T code : Solar_Project_Admin), then select New project button.
The program inform that:
"Runtime Errors: Message Type Unknow
What happened:
Error in ABAP Application program
The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated because
it has come across a statement that unfortunately cannot be excuted.
etc
Do you know about this problem, what is the errors ?
Thanks all.

Dear all.
With Solution Manager EHP1
SAP Basis: SAPKB7001-SAPKB70016, SAPKB70101-SAPKB70102
SAP ABA: SAPKA7001-SAPK70016, SAPKA70101-SAPKA70102
Detail log as below:
Runtime Errors MESSAGE_TYPE_UNKNOWN
Date and Time 28.04.2009 16:47:15
Short text
Message type " " is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Only message types A, E, I, W, S, and X are allowed.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_UNKNOWN" " "
"SAPLSPROJECT_SYSTEM_LANDSCAPE" or "LSPROJECT_SYSTEM_LANDSCAPEU28"
"SPROJECT_SYSL_CHECK_CENTRAL_SY"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Information on where terminated
Termination occurred in the ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" - in
"SPROJECT_SYSL_CHECK_CENTRAL_SY".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 29
of the (Include) program "LSPROJECT_SYSTEM_LANDSCAPEU28".

Problem starting with solution manager

hi guy, i have a problem with Solution Manager version 4.0 During an istallation of support package I had a network problem and the system went down fore some minutes. After that, is not possible logon on system. I try startsap and is ok, db seem up but is not possible connect by sapgui.
These are some errors that I can find in workdir
Tue Jan 27 15:08:51 2009
ERROR => GwIConnect: GwRead to SAPSM01 / 3301 failed, rc: NIETIMEOUT [gwxx_m
t.c    473]
***LOG S90=> SAP_CMREGTP2, GwIConnect ( 223) [r3cpic_mt.c 9618]
ERROR => ErrTrace: no error info available [err_mt.c     1507]
Connect_PM TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
no SAP ErrInfo available
>TS> Tue Jan 27 15:10:51 2009
T:4398099755584 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
no SAP ErrInfo available
System is a Suse/Linux ppc64, with MaxDB as database
Please help me!!
hi guy, i have a problem with Solution Manager version 4.0 During an istallation of support package I had a network problem and the system went down fore some minutes. After that, is not possible logon on system. I try startsap and is ok, db seem up but is not possible connect by sapgui.
These are some errors that I can find in workdir
Tue Jan 27 15:08:51 2009
ERROR => GwIConnect: GwRead to SAPSM01 / 3301 failed, rc: NIETIMEOUT [gwxx_m
t.c    473]
***LOG S90=> SAP_CMREGTP2, GwIConnect ( 223) [r3cpic_mt.c 9618]
ERROR => ErrTrace: no error info available [err_mt.c     1507]
Connect_PM TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
no SAP ErrInfo available
>TS> Tue Jan 27 15:10:51 2009
T:4398099755584 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
no SAP ErrInfo available
System is a Suse/Linux ppc64, with MaxDB as database
Please help me!!

hi,
there is anyone who can help me?
Many Thanks
Fabrizio

Solution Manager MMC Problems

Similar Messages

Maybe you are looking for